diff options
author | Gregory Nutt <gnutt@nuttx.org> | 2013-09-12 15:45:12 -0600 |
---|---|---|
committer | Gregory Nutt <gnutt@nuttx.org> | 2013-09-12 15:45:12 -0600 |
commit | 659a3c79af1cc0974825f82f2274f2ae07e8f6f2 (patch) | |
tree | a36f372213448d29fc91416104fb1440bc77bbc0 | |
parent | dbf4924d9ab3aaafe496857cd22045b936826ace (diff) | |
download | nuttx-659a3c79af1cc0974825f82f2274f2ae07e8f6f2.tar.gz nuttx-659a3c79af1cc0974825f82f2274f2ae07e8f6f2.tar.bz2 nuttx-659a3c79af1cc0974825f82f2274f2ae07e8f6f2.zip |
SAMA5: Beginning of EMAC and GMAC register definition header files
-rw-r--r-- | nuttx/ChangeLog | 3 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/chip/sam_emac.h | 244 | ||||
-rw-r--r-- | nuttx/arch/arm/src/sama5/chip/sam_gmac.h | 61 | ||||
-rw-r--r-- | nuttx/configs/sama5d3x-ek/README.txt | 60 |
4 files changed, 366 insertions, 2 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 0b5464710..f40770775 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -5539,4 +5539,7 @@ (2013-9-12). * arch/arm/src/sama5/sama5_twi.c: Clean up some errors that only occur with CONFIG_DEBUG_I2C (2013-9-12). + * arch/arm/src/sama5/chip/sam_emac.h and sam_gmac.h: Register + definition files for the SAMA5 EMAC and GMAC peripherals + (incomplete on the initial commit) (2013-9-12). diff --git a/nuttx/arch/arm/src/sama5/chip/sam_emac.h b/nuttx/arch/arm/src/sama5/chip/sam_emac.h new file mode 100644 index 000000000..c71ca5c9e --- /dev/null +++ b/nuttx/arch/arm/src/sama5/chip/sam_emac.h @@ -0,0 +1,244 @@ +/************************************************************************************ + * arch/arm/src/sama5/chip/sam_emac.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_SAMA5_CHIP_SAM_EMAC_H +#define __ARCH_ARM_SRC_SAMA5_CHIP_SAM_EMAC_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#include "chip/sam_memorymap.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* EMAC Register Offsets ************************************************************/ + +#define SAM_EMAC_NCR_OFFSET 0x0000 /* Network Control Register */ +#define SAM_EMAC_NCFGR_OFFSET 0x0004 /* Network Configuration Register */ +#define SAM_EMAC_NSR_OFFSET 0x0008 /* Network Status Register */ + /* 0x000c-0x0010 Reserved */ +#define SAM_EMAC_TSR_OFFSET 0x0014 /* Transmit Status Register */ +#define SAM_EMAC_RBQP_OFFSET 0x0018 /* Receive Buffer Queue Pointer Register */ +#define SAM_EMAC_TBQP_OFFSET 0x001c /* Transmit Buffer Queue Pointer Register */ +#define SAM_EMAC_RSR_OFFSET 0x0020 /* Receive Status Register */ +#define SAM_EMAC_ISR_OFFSET 0x0024 /* Interrupt Status Register */ +#define SAM_EMAC_IER_OFFSET 0x0028 /* Interrupt Enable Register */ +#define SAM_EMAC_IDR_OFFSET 0x002c /* Interrupt Disable Register */ +#define SAM_EMAC_IMR_OFFSET 0x0030 /* Interrupt Mask Register */ +#define SAM_EMAC_MAN_OFFSET 0x0034 /* Phy Maintenance Register */ +#define SAM_EMAC_PTR_OFFSET 0x0038 /* Pause Time Register */ +#define SAM_EMAC_PFR_OFFSET 0x003c /* Pause Frames Received Register */ +#define SAM_EMAC_FTO_OFFSET 0x0040 /* Frames Transmitted Ok Register */ +#define SAM_EMAC_SCF_OFFSET 0x0044 /* Single Collision Frames Register */ +#define SAM_EMAC_MCF_OFFSET 0x0048 /* Multiple Collision Frames Register */ +#define SAM_EMAC_FRO_OFFSET 0x004c /* Frames Received Ok Register */ +#define SAM_EMAC_FCSE_OFFSET 0x0050 /* Frame Check Sequence Errors Register */ +#define SAM_EMAC_ALE_OFFSET 0x0054 /* Alignment Errors Register */ +#define SAM_EMAC_DTF_OFFSET 0x0058 /* Deferred Transmission Frames Register */ +#define SAM_EMAC_LCOL_OFFSET 0x005c /* Late Collisions Register */ +#define SAM_EMAC_ECOL_OFFSET 0x0060 /* Excessive Collisions Register */ +#define SAM_EMAC_TUND_OFFSET 0x0064 /* Transmit Underrun Errors Register */ +#define SAM_EMAC_CSE_OFFSET 0x0068 /* Carrier Sense Errors Register */ +#define SAM_EMAC_RRE_OFFSET 0x006c /* Receive Resource Errors Register */ +#define SAM_EMAC_ROV_OFFSET 0x0070 /* Receive Overrun Errors Register */ +#define SAM_EMAC_RSE_OFFSET 0x0074 /* Receive Symbol Errors Register */ +#define SAM_EMAC_ELE_OFFSET 0x0078 /* Excessive Length Errors Register */ +#define SAM_EMAC_RJA_OFFSET 0x007c /* Receive Jabbers Register */ +#define SAM_EMAC_USF_OFFSET 0x0080 /* Undersize Frames Register */ +#define SAM_EMAC_STE_OFFSET 0x0084 /* SQE Test Errors Register */ +#define SAM_EMAC_RLE_OFFSET 0x0088 /* Received Length Field Mismatch Register */ +#define SAM_EMAC_HRB_OFFSET 0x0090 /* Hash Register Bottom [31:0] Register */ +#define SAM_EMAC_HRT_OFFSET 0x0094 /* Hash Register Top [63:32] Register */ +#define SAM_EMAC_SA1B_OFFSET 0x0098 /* Specific Address 1 Bottom Register */ +#define SAM_EMAC_SA1T_OFFSET 0x009c /* Specific Address 1 Top Register */ +#define SAM_EMAC_SA2B_OFFSET 0x00a0 /* Specific Address 2 Bottom Register */ +#define SAM_EMAC_SA2T_OFFSET 0x00a4 /* Specific Address 2 Top Register */ +#define SAM_EMAC_SA3B_OFFSET 0x00a8 /* Specific Address 3 Bottom Register */ +#define SAM_EMAC_SA3T_OFFSET 0x00ac /* Specific Address 3 Top Register */ +#define SAM_EMAC_SA4B_OFFSET 0x00b0 /* Specific Address 4 Bottom Register */ +#define SAM_EMAC_SA4T_OFFSET 0x00b4 /* Specific Address 4 Top Register */ +#define SAM_EMAC_TID_OFFSET 0x00b8 /* Type ID Checking Register */ +#define SAM_EMAC_USRIO_OFFSET 0x00c0 /* User Input/Output Register */ +#define SAM_EMAC_WOL_OFFSET 0x00c4 /* Wake on LAN Register */ + /* 0x00c8-0x00fc Reserved */ + +/* EMAC Register Addresses **********************************************************/ + +#define SAM_EMAC_NCR (SAM_EMAC_VBASE+SAM_EMAC_NCR_OFFSET) +#define SAM_EMAC_NCFGR (SAM_EMAC_VBASE+SAM_EMAC_NCFGR_OFFSET) +#define SAM_EMAC_NSR (SAM_EMAC_VBASE+SAM_EMAC_NSR_OFFSET) +#define SAM_EMAC_TSR (SAM_EMAC_VBASE+SAM_EMAC_TSR_OFFSET) +#define SAM_EMAC_RBQP (SAM_EMAC_VBASE+SAM_EMAC_RBQP_OFFSET) +#define SAM_EMAC_TBQP (SAM_EMAC_VBASE+SAM_EMAC_TBQP_OFFSET) +#define SAM_EMAC_RSR (SAM_EMAC_VBASE+SAM_EMAC_RSR_OFFSET) +#define SAM_EMAC_ISR (SAM_EMAC_VBASE+SAM_EMAC_ISR_OFFSET) +#define SAM_EMAC_IER (SAM_EMAC_VBASE+SAM_EMAC_IER_OFFSET) +#define SAM_EMAC_IDR (SAM_EMAC_VBASE+SAM_EMAC_IDR_OFFSET) +#define SAM_EMAC_IMR (SAM_EMAC_VBASE+SAM_EMAC_IMR_OFFSET) +#define SAM_EMAC_MAN (SAM_EMAC_VBASE+SAM_EMAC_MAN_OFFSET) +#define SAM_EMAC_PTR (SAM_EMAC_VBASE+SAM_EMAC_PTR_OFFSET) +#define SAM_EMAC_PFR (SAM_EMAC_VBASE+SAM_EMAC_PFR_OFFSET) +#define SAM_EMAC_FTO (SAM_EMAC_VBASE+SAM_EMAC_FTO_OFFSET) +#define SAM_EMAC_SCF (SAM_EMAC_VBASE+SAM_EMAC_SCF_OFFSET) +#define SAM_EMAC_MCF (SAM_EMAC_VBASE+SAM_EMAC_MCF_OFFSET) +#define SAM_EMAC_FRO (SAM_EMAC_VBASE+SAM_EMAC_FRO_OFFSET) +#define SAM_EMAC_FCSE (SAM_EMAC_VBASE+SAM_EMAC_FCSE_OFFSET) +#define SAM_EMAC_ALE (SAM_EMAC_VBASE+SAM_EMAC_ALE_OFFSET) +#define SAM_EMAC_DTF (SAM_EMAC_VBASE+SAM_EMAC_DTF_OFFSET) +#define SAM_EMAC_LCOL (SAM_EMAC_VBASE+SAM_EMAC_LCOL_OFFSET) +#define SAM_EMAC_ECOL (SAM_EMAC_VBASE+SAM_EMAC_ECOL_OFFSET) +#define SAM_EMAC_TUND (SAM_EMAC_VBASE+SAM_EMAC_TUND_OFFSET) +#define SAM_EMAC_CSE (SAM_EMAC_VBASE+SAM_EMAC_CSE_OFFSET) +#define SAM_EMAC_RRE (SAM_EMAC_VBASE+SAM_EMAC_RRE_OFFSET) +#define SAM_EMAC_ROV (SAM_EMAC_VBASE+SAM_EMAC_ROV_OFFSET) +#define SAM_EMAC_RSE (SAM_EMAC_VBASE+SAM_EMAC_RSE_OFFSET) +#define SAM_EMAC_ELE (SAM_EMAC_VBASE+SAM_EMAC_ELE_OFFSET) +#define SAM_EMAC_RJA (SAM_EMAC_VBASE+SAM_EMAC_RJA_OFFSET) +#define SAM_EMAC_USF (SAM_EMAC_VBASE+SAM_EMAC_USF_OFFSET) +#define SAM_EMAC_STE (SAM_EMAC_VBASE+SAM_EMAC_STE_OFFSET) +#define SAM_EMAC_RLE (SAM_EMAC_VBASE+SAM_EMAC_RLE_OFFSET) +#define SAM_EMAC_HRB (SAM_EMAC_VBASE+SAM_EMAC_HRB_OFFSET) +#define SAM_EMAC_HRT (SAM_EMAC_VBASE+SAM_EMAC_HRT_OFFSET) +#define SAM_EMAC_SA1B (SAM_EMAC_VBASE+SAM_EMAC_SA1B_OFFSET) +#define SAM_EMAC_SA1T (SAM_EMAC_VBASE+SAM_EMAC_SA1T_OFFSET) +#define SAM_EMAC_SA2B (SAM_EMAC_VBASE+SAM_EMAC_SA2B_OFFSET) +#define SAM_EMAC_SA2T (SAM_EMAC_VBASE+SAM_EMAC_SA2T_OFFSET) +#define SAM_EMAC_SA3B (SAM_EMAC_VBASE+SAM_EMAC_SA3B_OFFSET) +#define SAM_EMAC_SA3T (SAM_EMAC_VBASE+SAM_EMAC_SA3T_OFFSET) +#define SAM_EMAC_SA4B (SAM_EMAC_VBASE+SAM_EMAC_SA4B_OFFSET) +#define SAM_EMAC_SA4T (SAM_EMAC_VBASE+SAM_EMAC_SA4T_OFFSET) +#define SAM_EMAC_TID (SAM_EMAC_VBASE+SAM_EMAC_TID_OFFSET) +#define SAM_EMAC_USRIO (SAM_EMAC_VBASE+SAM_EMAC_USRIO_OFFSET) +#define SAM_EMAC_WOL (SAM_EMAC_VBASE+SAM_EMAC_WOL_OFFSET) + +/* EMAC Register Bit Definitions ****************************************************/ + +/* Network Control Register */ +#define EMAC_NCR_ +/* Network Configuration Register */ +#define EMAC_NCFGR_ +/* Network Status Register */ +#define EMAC_NSR_ +/* Transmit Status Register */ +#define EMAC_TSR_ +/* Receive Buffer Queue Pointer Register */ +#define EMAC_RBQP_ +/* Transmit Buffer Queue Pointer Register */ +#define EMAC_TBQP_ +/* Receive Status Register */ +#define EMAC_RSR_ +/* Interrupt Status Register */ +#define EMAC_ISR_ +/* Interrupt Enable Register */ +#define EMAC_IER_ +/* Interrupt Disable Register */ +#define EMAC_IDR_ +/* Interrupt Mask Register */ +#define EMAC_IMR_ +/* Phy Maintenance Register */ +#define EMAC_MAN_ +/* Pause Time Register */ +#define EMAC_PTR_ +/* Pause Frames Received Register */ +#define EMAC_PFR_ +/* Frames Transmitted Ok Register */ +#define EMAC_FTO_ +/* Single Collision Frames Register */ +#define EMAC_SCF_ +/* Multiple Collision Frames Register */ +#define EMAC_MCF_ +/* Frames Received Ok Register */ +#define EMAC_FRO_ +/* Frame Check Sequence Errors Register */ +#define EMAC_FCSE_ +/* Alignment Errors Register */ +#define EMAC_ALE_ +/* Deferred Transmission Frames Register */ +#define EMAC_DTF_ +/* Late Collisions Register */ +#define EMAC_LCOL_ +/* Excessive Collisions Register */ +#define EMAC_ECOL_ +/* Transmit Underrun Errors Register */ +#define EMAC_TUND_ +/* Carrier Sense Errors Register */ +#define EMAC_CSE_ +/* Receive Resource Errors Register */ +#define EMAC_RRE_ +/* Receive Overrun Errors Register */ +#define EMAC_ROV_ +/* Receive Symbol Errors Register */ +#define EMAC_RSE_ +/* Excessive Length Errors Register */ +#define EMAC_ELE_ +/* Receive Jabbers Register */ +#define EMAC_RJA_ +/* Undersize Frames Register */ +#define EMAC_USF_ +/* SQE Test Errors Register */ +#define EMAC_STE_ +/* Received Length Field Mismatch Register */ +#define EMAC_RLE_ +/* Hash Register Bottom [31:0] Register */ +#define EMAC_HRB_ +/* Hash Register Top [63:32] Register */ +#define EMAC_HRT_ +/* Specific Address 1 Bottom Register */ +#define EMAC_SA1B_ +/* Specific Address 1 Top Register */ +#define EMAC_SA1T_ +/* Specific Address 2 Bottom Register */ +#define EMAC_SA2B_ +/* Specific Address 2 Top Register */ +#define EMAC_SA2T_ +/* Specific Address 3 Bottom Register */ +#define EMAC_SA3B_ +/* Specific Address 3 Top Register */ +#define EMAC_SA3T_ +/* Specific Address 4 Bottom Register */ +#define EMAC_SA4B_ +/* Specific Address 4 Top Register */ +#define EMAC_SA4T_ +/* Type ID Checking Register */ +#define EMAC_TID_ +/* User Input/Output Register */ +#define EMAC_USRIO_ +/* Wake on LAN Register */ +#define EMAC_WOL_ + +#endif /* __ARCH_ARM_SRC_SAMA5_CHIP_SAM_EMAC_H */ diff --git a/nuttx/arch/arm/src/sama5/chip/sam_gmac.h b/nuttx/arch/arm/src/sama5/chip/sam_gmac.h new file mode 100644 index 000000000..a3a86a775 --- /dev/null +++ b/nuttx/arch/arm/src/sama5/chip/sam_gmac.h @@ -0,0 +1,61 @@ +/************************************************************************************ + * arch/arm/src/sama5/chip/sam_gmac.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_SAMA5_CHIP_SAM_GMAC_H +#define __ARCH_ARM_SRC_SAMA5_CHIP_SAM_GMAC_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#include "chip/sam_memorymap.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* GMAC Register Offsets ************************************************************/ + +#define SAM_GMAC_ + +/* GMAC Register Addresses *********************************************************/ + +#define SAM_GMAC_ + +/* GMAC Register Bit Definitions ***************************************************/ + +#define GMAC_ + +#endif /* __ARCH_ARM_SRC_SAMA5_CHIP_SAM_GMAC_H */ diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt index 6913b1f23..feb105314 100644 --- a/nuttx/configs/sama5d3x-ek/README.txt +++ b/nuttx/configs/sama5d3x-ek/README.txt @@ -1802,6 +1802,55 @@ Configurations CONFIG_I2CTOOL_MAXBUS=2 : TWI2 has the maximum bus number 2 CONFIG_I2CTOOL_DEFFREQ=100000 : Pick a consistent frequency + The I2C tool has extensive help that can be accessed as follows: + + nsh> i2c help + Usage: i2c <cmd> [arguments] + Where <cmd> is one of: + + Show help : ? + List busses : bus + List devices : dev [OPTIONS] <first> <last> + Read register : get [OPTIONS] [<repititions>] + Show help : help + Write register: set [OPTIONS] <value> [<repititions>] + Verify access : verf [OPTIONS] [<value>] [<repititions>] + + Where common "sticky" OPTIONS include: + [-a addr] is the I2C device address (hex). Default: 03 Current: 03 + [-b bus] is the I2C bus number (decimal). Default: 0 Current: 0 + [-r regaddr] is the I2C device register address (hex). Default: 00 Current: 00 + [-w width] is the data width (8 or 16 decimal). Default: 8 Current: 8 + [-s|n], send/don't send start between command and data. Default: -n Current: -n + [-i|j], Auto increment|don't increment regaddr on repititions. Default: NO Current: NO + [-f freq] I2C frequency. Default: 100000 Current: 100000 + + NOTES: + o Arguments are "sticky". For example, once the I2C address is + specified, that address will be re-used until it is changed. + + WARNING: + o The I2C dev command may have bad side effects on your I2C devices. + Use only at your own risk. + + As an eample, the I2C dev comman can be used to list all devices + responding on TWI0 (the default) like this: + + nsh> i2c dev 0x03 0x77 + 0 1 2 3 4 5 6 7 8 9 a b c d e f + 00: -- -- -- -- -- -- -- -- -- -- -- -- -- + 10: -- -- -- -- -- -- -- -- -- -- 1a -- -- -- -- -- + 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + 30: -- -- -- -- -- -- -- -- -- 39 -- -- -- 3d -- -- + 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + 60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- + 70: -- -- -- -- -- -- -- -- + nsh> + + Address 0x1a is the WM8904. Address 0x39 is the SIL9022A. I am + not sure what is at address 0x3d and 0x60 + STATUS: PCK FREQUENCY 2013-7-19: This configuration (as do the others) run at 396MHz. @@ -1855,9 +1904,16 @@ Configurations UDPHS 2013-9-5: The UDPHS driver is basically functional. - AT24 SERIAL EEPROM + I2C 2013-9-12: I have been unusuccessful getting the external serial - EEPROM to work. + AT24 EEPROM to work. I am pretty sure that this is a problem with + my external AT24 board (the TWI0 bus hangs when the AT24 is plugged + in). I will skip the AT24 integration since it is not on the critical + path at the moment. + 2013-9-12: The I2C tool, however, seems to work well. It succesfully + enumerates the devices on the bus and successfully exchanges a few + commands. The real test of the come later when a real I2C device is + integrated. ostest: This configuration directory, performs a simple OS test using |