z8 configurations all converted to use mconf tool

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5397 42af7a65-404d-4744-a932-0658087f49c3

17 files changed, 951 insertions, 454 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 170a55453..97b5b74a0 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -3706,4 +3706,5 @@
 	  -Wstrict-prototypes (From Denis Cariki).
 	* arch/arm/src/calapyso/calypso_keypad.c:  Add Calypso keypad driver.  From
 	  Denis Cariki.
-
+	* z8encore000zco/ostest and z8f64200100kit/ostest:  Converted to use Kconfig/
+	  mconf configuration tool.
diff --git a/nuttx/arch/Kconfig b/nuttx/arch/Kconfig
index bbe99c17c..5cee40628 100644
--- a/nuttx/arch/Kconfig
+++ b/nuttx/arch/Kconfig
@@ -117,6 +117,12 @@ config ARCH_STACKDUMP
 	---help---
 		Enable to do stack dumps after assertions
 
+config ENDIAN_BIG
+	bool "Big Endian Architecture"
+	default n
+	---help---
+		Select if architecture operates using big-endian byte ordering.
+
 comment "Board Settings"
 
 config BOARD_LOOPSPERMSEC
diff --git a/nuttx/arch/z80/Kconfig b/nuttx/arch/z80/Kconfig
index a2764cb65..12ab5dc0b 100644
--- a/nuttx/arch/z80/Kconfig
+++ b/nuttx/arch/z80/Kconfig
@@ -13,56 +13,62 @@ config ARCH_CHIP_Z80
 	---help---
 		Classic ZiLOG z80 chip
 
-config ARCH_CHIP_Z8F640X
-	bool "Z8F640X"
-	select ARCH_CHIP_Z8
-	---help---
-		ZiLOG Z8F640X (z8 Encore)
-
 config ARCH_CHIP_Z8F6403
 	bool "Z8F6403"
 	select ARCH_CHIP_Z8
+	select ARCH_CHIP_Z8F640X
+	select ENDIAN_BIG
+	select HAVE_LOWUARTINIT
 	---help---
 		ZiLOG Z8F6403 (z8 Encore)
 
-config ARCH_CHIP_Z8F642X
-	bool "Z8F642X"
-	select ARCH_CHIP_Z8
-	---help---
-		ZiLOG Z8F642X (z8 Encore)
-
 config ARCH_CHIP_Z8F6423
 	bool "Z8F6423"
 	select ARCH_CHIP_Z8
+	select ARCH_CHIP_Z8F642X
+	select ENDIAN_BIG
+	select HAVE_LOWUARTINIT
 	---help---
 		ZiLOG Z8F6423 (z8 Encore)
 
 config ARCH_CHIP_EZ80F91
 	bool "EZ80F91"
 	select ARCH_CHIP_EZ80
+	select HAVE_LOWUARTINIT
 	---help---
 		ZiLOG EZ80F91 (ez80 Acclaim)
 
 config ARCH_CHIP_EZ80F92
 	bool "EZ80F92"
 	select ARCH_CHIP_EZ80
+	select HAVE_LOWUARTINIT
 	---help---
 		ZiLOG EZ80F92 (ez80 Acclaim)
 
 config ARCH_CHIP_EZ80F93
 	bool "EZ80F93"
 	select ARCH_CHIP_EZ80
+	select HAVE_LOWUARTINIT
 	---help---
 		ZiLOG EZ80F93 (ez80 Acclaim)
 
 endchoice
 
+config ARCH_CHIP_Z8F642X
+	bool
+
+config ARCH_CHIP_Z8F640X
+	bool
+
 config ARCH_CHIP_Z8
 	bool
 
 config ARCH_CHIP_EZ80
 	bool
 
+config HAVE_LOWUARTINIT
+	bool
+
 config ARCH_CHIP
 	string
 	default "z80"		if ARCH_CHIP_Z80
diff --git a/nuttx/arch/z80/src/ez80/Kconfig b/nuttx/arch/z80/src/ez80/Kconfig
index 6bde573f6..d257ca285 100644
--- a/nuttx/arch/z80/src/ez80/Kconfig
+++ b/nuttx/arch/z80/src/ez80/Kconfig
@@ -31,13 +31,6 @@ config EZ80_EMAC
 
 endmenu
 
-config HAVE_LOWUARTINIT
-	bool "Low UART Init"
-	default y if !EZ80_UART0 && !EZ80_UART1 && !EZ80_UART2
-	default n if EZ80_UART0 || EZ80_UART1 || EZ80_UART2
-	---help---
-		Provides low-level UART initialization logic as up_lowuartinit (only needed if there is no serial driver).
-
 if EZ80_EMAC
 
 config EZ80_FIAD
diff --git a/nuttx/arch/z80/src/z8/Kconfig b/nuttx/arch/z80/src/z8/Kconfig
index 1f0289f7c..2bf89905e 100644
--- a/nuttx/arch/z80/src/z8/Kconfig
+++ b/nuttx/arch/z80/src/z8/Kconfig
@@ -4,4 +4,17 @@
 #
 
 if ARCH_CHIP_Z8
+
+# UART0/1 always enabled
+
+config Z8_UART0
+	bool
+	default y
+	select ARCH_HAVE_UART0
+
+config Z8_UART1
+	bool
+	default y
+	select ARCH_HAVE_UART1
+
 endif
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
index 70b3ed76e..a89e7cdea 100644
--- a/nuttx/configs/Kconfig
+++ b/nuttx/configs/Kconfig
@@ -573,20 +573,20 @@ config ARCH_BOARD_Z80SIM
 		(verified with version 2.6.0).
 
 config ARCH_BOARD_Z8ENCORE000ZCO
-	bool "ZiLOG z8encore000zco Development Kit"
+	bool "ZiLOG Z8ENCORE000ZCO Development Kit"
 	depends on ARCH_CHIP_Z8F6403
 	select ARCH_HAVE_LEDS
 	---help---
-		z8Encore! Microcontroller.  This port use the ZiLOG z8encore000zco
+		z8Encore! Microcontroller.  This port use the ZiLOG Z8ENCORE000ZCO
 		development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
 		tools.  The development environment is Cygwin under WinXP.
 
-config ARCH_BOARD_Z8F64200100KI
+config ARCH_BOARD_Z8F64200100KIT
 	bool "ZiLOG Z8F64200100KIT Development Kit"
-	depends on ARCH_CHIP_Z8F642X
+	depends on ARCH_CHIP_Z8F6423
 	select ARCH_HAVE_LEDS
 	---help---
-		z8Encore! Microcontroller.  This port use the Zilog z8f64200100kit
+		z8Encore! Microcontroller.  This port use the Zilog Z8F64200100KIT
 		development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
 		tools.  The development environment is Cygwin under WinXP.
 
@@ -669,7 +669,7 @@ config ARCH_BOARD
 	default "z16f2800100zcog"     if ARCH_BOARD_Z16F2800100ZCOG
 	default "z80sim"              if ARCH_BOARD_Z80SIM
 	default "z8encore000zco"      if ARCH_BOARD_Z8ENCORE000ZCO
-	default "z8f64200100kit"      if ARCH_BOARD_Z8F64200100KI
+	default "z8f64200100kit"      if ARCH_BOARD_Z8F64200100KIT
 	default "sim"                 if ARCH_BOARD_SIM
 	default ""                    if ARCH_BOARD_CUSTOM
 
@@ -902,7 +902,7 @@ endif
 if ARCH_BOARD_Z8ENCORE000ZCO
 source "configs/z8encore000zco/Kconfig"
 endif
-if ARCH_BOARD_Z8F64200100KI
+if ARCH_BOARD_Z8F64200100KIT
 source "configs/z8f64200100kit/Kconfig"
 endif
 if ARCH_BOARD_SIM
diff --git a/nuttx/configs/ez80f910200kitg/ostest/Make.defs b/nuttx/configs/ez80f910200kitg/ostest/Make.defs
index 98296a51b..0124684c6 100644
--- a/nuttx/configs/ez80f910200kitg/ostest/Make.defs
+++ b/nuttx/configs/ez80f910200kitg/ostest/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/dhcpd/Make.defs b/nuttx/configs/ez80f910200zco/dhcpd/Make.defs
index 8671fdd51..f227a046c 100644
--- a/nuttx/configs/ez80f910200zco/dhcpd/Make.defs
+++ b/nuttx/configs/ez80f910200zco/dhcpd/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/httpd/Make.defs b/nuttx/configs/ez80f910200zco/httpd/Make.defs
index a07580a32..398a6ec5d 100644
--- a/nuttx/configs/ez80f910200zco/httpd/Make.defs
+++ b/nuttx/configs/ez80f910200zco/httpd/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/nettest/Make.defs b/nuttx/configs/ez80f910200zco/nettest/Make.defs
index d13428a34..02b6a22a2 100644
--- a/nuttx/configs/ez80f910200zco/nettest/Make.defs
+++ b/nuttx/configs/ez80f910200zco/nettest/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/nsh/Make.defs b/nuttx/configs/ez80f910200zco/nsh/Make.defs
index 7a74bc306..6a0c9bb73 100644
--- a/nuttx/configs/ez80f910200zco/nsh/Make.defs
+++ b/nuttx/configs/ez80f910200zco/nsh/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/ostest/Make.defs b/nuttx/configs/ez80f910200zco/ostest/Make.defs
index 5d3d4689e..727c68ba3 100644
--- a/nuttx/configs/ez80f910200zco/ostest/Make.defs
+++ b/nuttx/configs/ez80f910200zco/ostest/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/ez80f910200zco/poll/Make.defs b/nuttx/configs/ez80f910200zco/poll/Make.defs
index 98ca22533..d7ba08ec0 100644
--- a/nuttx/configs/ez80f910200zco/poll/Make.defs
+++ b/nuttx/configs/ez80f910200zco/poll/Make.defs
@@ -36,7 +36,14 @@
 include $(TOPDIR)/.config
 include $(TOPDIR)/tools/Config.mk
 
-# These are the directories where the ZDS-II toolchain is installed
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
 
 ZDSVERSION := 5.1.1
 
@@ -57,7 +64,7 @@ ifeq ($(CONFIG_WINDOWS_NATIVE),y)
   ARCHUSRINCLUDES = -usrinc:.
 else
   WINTOOL := y
-  ZDSINSTALLDIR := C:/Program Files (x86)/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
+  ZDSINSTALLDIR := C:/PROGRA~2/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
   INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
   ZDSBINDIR := $(INSTALLDIR)/bin
   ZDSSTDINCDIR := $(INSTALLDIR)/include/std
diff --git a/nuttx/configs/z8encore000zco/ostest/appconfig b/nuttx/configs/z8encore000zco/ostest/appconfig
deleted file mode 100644
index 212b52f72..000000000
--- a/nuttx/configs/z8encore000zco/ostest/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/z8encore000zco/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-
diff --git a/nuttx/configs/z8encore000zco/ostest/defconfig b/nuttx/configs/z8encore000zco/ostest/defconfig
index 05e7c906c..a79355b71 100644
--- a/nuttx/configs/z8encore000zco/ostest/defconfig
+++ b/nuttx/configs/z8encore000zco/ostest/defconfig
@@ -1,120 +1,161 @@
-############################################################################
-# configs/z8encore000zco/ostest/defconfig
-#
-#   Copyright (C) 2008-2010, 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture selection
 #
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+CONFIG_DEBUG=y
+# CONFIG_DEBUG_VERBOSE is not set
+# CONFIG_DEBUG_ENABLE is not set
+
+#
+# Subsystem Debug Options
+#
+# CONFIG_DEBUG_MM is not set
+# CONFIG_DEBUG_SCHED is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_LIB is not set
+# CONFIG_DEBUG_BINFMT is not set
+# CONFIG_DEBUG_GRAPHICS is not set
+
+#
+# Driver Debug Options
+#
+# CONFIG_DEBUG_ANALOG is not set
+# CONFIG_DEBUG_DMA is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+# CONFIG_ARCH_ARM is not set
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+CONFIG_ARCH_Z80=y
 CONFIG_ARCH="z80"
-CONFIG_ARCH_Z8=y
 CONFIG_ARCH_CHIP="z8"
-CONFIG_ARCH_CHIP_Z8=y
-CONFIG_ARCH_CHIP_Z8F640X=y
-CONFIG_ARCH_CHIP_Z8F6403=y
-CONFIG_ARCH_CHIP_Z8F642X=n
-CONFIG_ARCH_CHIP_Z8F6423=n
-CONFIG_ARCH_BOARD="z8encore000zco"
-CONFIG_ARCH_BOARD_Z8ENCORE000ZCO=y
 CONFIG_BOARD_LOOPSPERMSEC=1250
+# CONFIG_ARCH_CHIP_Z80 is not set
+CONFIG_ARCH_CHIP_Z8F6403=y
+# CONFIG_ARCH_CHIP_Z8F6423 is not set
+# CONFIG_ARCH_CHIP_EZ80F91 is not set
+# CONFIG_ARCH_CHIP_EZ80F92 is not set
+# CONFIG_ARCH_CHIP_EZ80F93 is not set
+CONFIG_ARCH_CHIP_Z8F640X=y
+CONFIG_ARCH_CHIP_Z8=y
+CONFIG_HAVE_LOWUARTINIT=y
+CONFIG_Z8_UART0=y
+CONFIG_Z8_UART1=y
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+# CONFIG_ARCH_STACKDUMP is not set
 CONFIG_ENDIAN_BIG=y
+
+#
+# Board Settings
+#
 CONFIG_DRAM_START=0x0
 CONFIG_DRAM_SIZE=65536
-CONFIG_ARCH_LEDS=n
+
 #
-# eZ8 specific device driver settings
+# Boot options
 #
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=0
-CONFIG_UART1_TXBUFSIZE=0
-CONFIG_UART0_RXBUFSIZE=0
-CONFIG_UART1_RXBUFSIZE=0
-CONFIG_UART0_BAUD=57600
-CONFIG_UART1_BAUD=57600
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# General build options
+# Board Selection
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_RAW_BINARY=n
+CONFIG_ARCH_BOARD_Z8ENCORE000ZCO=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="z8encore000zco"
 
 #
-# General OS setup
+# Common Board Options
 #
-CONFIG_USER_ENTRYPOINT="ostest_main"
-CONFIG_DEBUG=y
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2008
-CONFIG_START_MONTH=2
-CONFIG_START_DAY=17
-CONFIG_JULIAN_TIME=n
-CONFIG_HAVE_LOWUARTINIT=y
-CONFIG_DEV_CONSOLE=n
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
+CONFIG_ARCH_HAVE_LEDS=y
+# CONFIG_ARCH_LEDS is not set
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Board-Specific Options
 #
-# There are certain dependency relationships in these
-# features.
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# RTOS Features
 #
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=0
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=11
+CONFIG_START_DAY=28
+# CONFIG_DEV_CONSOLE is not set
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
 CONFIG_DISABLE_CLOCK=y
 CONFIG_DISABLE_POSIX_TIMERS=y
 CONFIG_DISABLE_PTHREAD=y
@@ -125,28 +166,6 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=y
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve sysem performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
 # Sizes of configurable things (0 disables)
 #
 CONFIG_MAX_TASKS=8
@@ -155,8 +174,6 @@ CONFIG_NPTHREAD_KEYS=0
 CONFIG_NFILE_DESCRIPTORS=0
 CONFIG_NFILE_STREAMS=0
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=0
-CONFIG_NUNGET_CHARS=0
 CONFIG_PREALLOC_MQ_MSGS=0
 CONFIG_MQ_MAXMSGSIZE=0
 CONFIG_MAX_WDOGPARMS=2
@@ -164,67 +181,303 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=0
 
 #
-# TCP/IP and UDP support via uIP
+# Stack and heap information
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+# CONFIG_CUSTOM_STACK is not set
+CONFIG_IDLETHREAD_STACKSIZE=256
+CONFIG_USERMAIN_STACKSIZE=256
+CONFIG_PTHREAD_STACK_MIN=128
+CONFIG_PTHREAD_STACK_DEFAULT=256
 
 #
-# UIP Network Utilities
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_LOWLEVEL_CONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_ARCH_HAVE_UART1=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_UART1_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=0
+CONFIG_UART0_TXBUFSIZE=0
+CONFIG_UART0_BAUD=57600
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
 
 #
-# Settings for examples/ostest
+# UART1 Configuration
+#
+CONFIG_UART1_RXBUFSIZE=0
+CONFIG_UART1_TXBUFSIZE=0
+CONFIG_UART1_BAUD=57600
+CONFIG_UART1_BITS=8
+CONFIG_UART1_PARITY=0
+CONFIG_UART1_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_FS_RAMMAP is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_HAVE_HEAP2=y
+CONFIG_HEAP2_BASE=0x00000000
+CONFIG_HEAP2_SIZE=0
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+CONFIG_STDIO_BUFFER_SIZE=0
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=0
+# CONFIG_LIBM is not set
+CONFIG_NOPRINTF_FIELDWIDTH=y
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Named Applications
+#
+# CONFIG_NAMEDAPP is not set
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
 CONFIG_EXAMPLES_OSTEST_LOOPS=1
 CONFIG_EXAMPLES_OSTEST_STACKSIZE=256
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WLAN is not set
 
 #
-# Settings for apps/nshlib
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_CMD_SIZE=40
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
+# Interpreters
+#
 
 #
-# Stack and heap information
+# Interpreters
+#
+# CONFIG_FICL is not set
+# CONFIG_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=256
-CONFIG_USERMAIN_STACKSIZE=256
-CONFIG_PTHREAD_STACK_MIN=128
-CONFIG_PTHREAD_STACK_DEFAULT=256
-CONFIG_HEAP_SIZE=
-CONFIG_HEAP_BASE=
 
 #
-# Maintain legacy build behavior (revisit)
+# System NSH Add-Ons
 #
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/nuttx/configs/z8f64200100kit/ostest/appconfig b/nuttx/configs/z8f64200100kit/ostest/appconfig
deleted file mode 100644
index e6f0c2375..000000000
--- a/nuttx/configs/z8f64200100kit/ostest/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/z8f64200100kit/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-
diff --git a/nuttx/configs/z8f64200100kit/ostest/defconfig b/nuttx/configs/z8f64200100kit/ostest/defconfig
index bed04a40e..2389a0d34 100644
--- a/nuttx/configs/z8f64200100kit/ostest/defconfig
+++ b/nuttx/configs/z8f64200100kit/ostest/defconfig
@@ -1,119 +1,161 @@
-############################################################################
-# configs/z8f64200100kit/ostest/defconfig
-#
-#   Copyright (C) 2008, 2010, 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture selection
 #
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+CONFIG_DEBUG=y
+# CONFIG_DEBUG_VERBOSE is not set
+# CONFIG_DEBUG_ENABLE is not set
+
+#
+# Subsystem Debug Options
+#
+# CONFIG_DEBUG_MM is not set
+# CONFIG_DEBUG_SCHED is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_LIB is not set
+# CONFIG_DEBUG_BINFMT is not set
+# CONFIG_DEBUG_GRAPHICS is not set
+
+#
+# Driver Debug Options
+#
+# CONFIG_DEBUG_ANALOG is not set
+# CONFIG_DEBUG_DMA is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+# CONFIG_ARCH_ARM is not set
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+CONFIG_ARCH_Z80=y
 CONFIG_ARCH="z80"
-CONFIG_ARCH_Z8=y
 CONFIG_ARCH_CHIP="z8"
-CONFIG_ARCH_CHIP_Z8=y
-CONFIG_ARCH_CHIP_Z8F640X=n
-CONFIG_ARCH_CHIP_Z8F6403=n
-CONFIG_ARCH_CHIP_Z8F642X=y
-CONFIG_ARCH_CHIP_Z8F6423=y
-CONFIG_ARCH_BOARD="z8f64200100kit"
-CONFIG_ARCH_BOARD_Z8F64200100KIT=y
 CONFIG_BOARD_LOOPSPERMSEC=1250
+# CONFIG_ARCH_CHIP_Z80 is not set
+# CONFIG_ARCH_CHIP_Z8F6403 is not set
+CONFIG_ARCH_CHIP_Z8F6423=y
+# CONFIG_ARCH_CHIP_EZ80F91 is not set
+# CONFIG_ARCH_CHIP_EZ80F92 is not set
+# CONFIG_ARCH_CHIP_EZ80F93 is not set
+CONFIG_ARCH_CHIP_Z8F642X=y
+CONFIG_ARCH_CHIP_Z8=y
+CONFIG_HAVE_LOWUARTINIT=y
+CONFIG_Z8_UART0=y
+CONFIG_Z8_UART1=y
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+# CONFIG_ARCH_STACKDUMP is not set
 CONFIG_ENDIAN_BIG=y
+
+#
+# Board Settings
+#
+CONFIG_DRAM_START=
 CONFIG_DRAM_SIZE=65536
-CONFIG_ARCH_LEDS=n
+
 #
-# ez8 specific device driver settings
+# Boot options
 #
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=0
-CONFIG_UART1_TXBUFSIZE=0
-CONFIG_UART0_RXBUFSIZE=0
-CONFIG_UART1_RXBUFSIZE=0
-CONFIG_UART0_BAUD=57600
-CONFIG_UART1_BAUD=57600
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# General build options
+# Board Selection
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_RAW_BINARY=n
+CONFIG_ARCH_BOARD_Z8F64200100KIT=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="z8f64200100kit"
 
 #
-# General OS setup
+# Common Board Options
 #
-CONFIG_USER_ENTRYPOINT="ostest_main"
-CONFIG_DEBUG=y
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+CONFIG_ARCH_HAVE_LEDS=y
+# CONFIG_ARCH_LEDS is not set
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_MSEC_PER_TICK=10
 CONFIG_RR_INTERVAL=0
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2008
 CONFIG_START_MONTH=2
 CONFIG_START_DAY=17
-CONFIG_JULIAN_TIME=n
-CONFIG_HAVE_LOWUARTINIT=y
-CONFIG_DEV_CONSOLE=n
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
 CONFIG_DISABLE_CLOCK=y
 CONFIG_DISABLE_POSIX_TIMERS=y
 CONFIG_DISABLE_PTHREAD=y
@@ -124,28 +166,6 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=y
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve sysem performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
 # Sizes of configurable things (0 disables)
 #
 CONFIG_MAX_TASKS=8
@@ -154,8 +174,6 @@ CONFIG_NPTHREAD_KEYS=0
 CONFIG_NFILE_DESCRIPTORS=0
 CONFIG_NFILE_STREAMS=0
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=0
-CONFIG_NUNGET_CHARS=0
 CONFIG_PREALLOC_MQ_MSGS=0
 CONFIG_MQ_MAXMSGSIZE=0
 CONFIG_MAX_WDOGPARMS=2
@@ -163,67 +181,303 @@ CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=0
 
 #
-# TCP/IP and UDP support via uIP
+# Stack and heap information
+#
+# CONFIG_CUSTOM_STACK is not set
+CONFIG_IDLETHREAD_STACKSIZE=256
+CONFIG_USERMAIN_STACKSIZE=256
+CONFIG_PTHREAD_STACK_MIN=128
+CONFIG_PTHREAD_STACK_DEFAULT=256
+
 #
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_LOWLEVEL_CONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+CONFIG_ARCH_HAVE_UART1=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_UART1_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# UIP Network Utilities
+# UART0 Configuration
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_UART0_RXBUFSIZE=0
+CONFIG_UART0_TXBUFSIZE=0
+CONFIG_UART0_BAUD=57600
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
 
 #
-# Settings for examples/ostest
+# UART1 Configuration
+#
+CONFIG_UART1_RXBUFSIZE=0
+CONFIG_UART1_TXBUFSIZE=0
+CONFIG_UART1_BAUD=57600
+CONFIG_UART1_BITS=8
+CONFIG_UART1_PARITY=0
+CONFIG_UART1_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_FS_RAMMAP is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_HAVE_HEAP2=y
+CONFIG_HEAP2_BASE=0x00000000
+CONFIG_HEAP2_SIZE=0
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+CONFIG_STDIO_BUFFER_SIZE=0
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=0
+# CONFIG_LIBM is not set
+CONFIG_NOPRINTF_FIELDWIDTH=y
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Named Applications
+#
+# CONFIG_NAMEDAPP is not set
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
 CONFIG_EXAMPLES_OSTEST_LOOPS=1
 CONFIG_EXAMPLES_OSTEST_STACKSIZE=256
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WLAN is not set
 
 #
-# Settings for apps/nshlib
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_CMD_SIZE=40
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
+# Interpreters
+#
 
 #
-# Stack and heap information
+# Interpreters
+#
+# CONFIG_FICL is not set
+# CONFIG_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=256
-CONFIG_USERMAIN_STACKSIZE=256
-CONFIG_PTHREAD_STACK_MIN=128
-CONFIG_PTHREAD_STACK_DEFAULT=256
-CONFIG_HEAP_SIZE=
-CONFIG_HEAP_BASE=
 
 #
-# Maintain legacy build behavior (revisit)
+# System NSH Add-Ons
 #
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set