Rename examples/usbstorage to examples/usbmsc. From CCTSAO

4 files changed, 0 insertions, 882 deletions

diff --git a/apps/examples/usbstorage/.gitignore b/apps/examples/usbstorage/.gitignore
deleted file mode 100644
index fa1ec7579..000000000
--- a/apps/examples/usbstorage/.gitignore
+++ /dev/null
@@ -1,11 +0,0 @@
-/Make.dep
-/.depend
-/.built
-/*.asm
-/*.obj
-/*.rel
-/*.lst
-/*.sym
-/*.adb
-/*.lib
-/*.src
diff --git a/apps/examples/usbstorage/Makefile b/apps/examples/usbstorage/Makefile
deleted file mode 100644
index 76198efa0..000000000
--- a/apps/examples/usbstorage/Makefile
+++ /dev/null
@@ -1,117 +0,0 @@
-############################################################################
-# apps/examples/usbstorage/Makefile
-#
-#   Copyright (C) 2008, 2010-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
--include $(TOPDIR)/.config
--include $(TOPDIR)/Make.defs
-include $(APPDIR)/Make.defs
-
-# USB device mass storage example
-
-ASRCS		=
-CSRCS		= usbmsc_main.c
-
-AOBJS		= $(ASRCS:.S=$(OBJEXT))
-COBJS		= $(CSRCS:.c=$(OBJEXT))
-
-SRCS		= $(ASRCS) $(CSRCS)
-OBJS		= $(AOBJS) $(COBJS)
-
-ifeq ($(CONFIG_WINDOWS_NATIVE),y)
-  BIN		= ..\..\libapps$(LIBEXT)
-else
-ifeq ($(WINTOOL),y)
-  BIN		= ..\\..\\libapps$(LIBEXT)
-else
-  BIN		= ../../libapps$(LIBEXT)
-endif
-endif
-
-ROOTDEPPATH	= --dep-path .
-
-# USB storage built-in application info
-
-APPNAME1	= msconn
-PRIORITY1	= SCHED_PRIORITY_DEFAULT
-STACKSIZE1	= 2048
-
-APPNAME2	= msdis
-PRIORITY2	= SCHED_PRIORITY_DEFAULT
-STACKSIZE2	= 2048
-
-# Common build
-
-VPATH		= 
-
-all: .built
-.PHONY: context clean depend distclean
-
-$(AOBJS): %$(OBJEXT): %.S
-	$(call ASSEMBLE, $<, $@)
-
-$(COBJS): %$(OBJEXT): %.c
-	$(call COMPILE, $<, $@)
-
-.built: $(OBJS)
-	$(call ARCHIVE, $(BIN), $(OBJS))
-	@touch .built
-
-ifeq ($(CONFIG_NSH_BUILTIN_APPS),y)
-$(BUILTIN_REGISTRY)$(DELIM)$(APPNAME1)_main.bdat: $(DEPCONFIG) Makefile
-	$(call REGISTER,$(APPNAME1),$(PRIORITY1),$(STACKSIZE1),$(APPNAME1)_main)
-
-$(BUILTIN_REGISTRY)$(DELIM)$(APPNAME2)_main.bdat: $(DEPCONFIG) Makefile
-	$(call REGISTER,$(APPNAME2),$(PRIORITY2),$(STACKSIZE2),$(APPNAME2)_main)
-
-context: $(BUILTIN_REGISTRY)$(DELIM)$(APPNAME1)_main.bdat $(BUILTIN_REGISTRY)$(DELIM)$(APPNAME2)_main.bdat
-else
-context:
-endif
-
-.depend: Makefile $(SRCS)
-	@$(MKDEP) $(ROOTDEPPATH) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep
-	@touch $@
-
-depend: .depend
-
-clean:
-	$(call DELFILE, .built)
-	$(call CLEAN)
-
-distclean: clean
-	$(call DELFILE, Make.dep)
-	$(call DELFILE, .depend)
-
--include Make.dep
-
diff --git a/apps/examples/usbstorage/usbmsc.h b/apps/examples/usbstorage/usbmsc.h
deleted file mode 100644
index b3652ab0a..000000000
--- a/apps/examples/usbstorage/usbmsc.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/****************************************************************************
- * examples/usbstorage/usbmsc.h
- *
- *   Copyright (C) 2008-2009, 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#ifndef __EXAMPLES_USBSTORAGE_USBMSC_H
-#define __EXAMPLES_USBSTORAGE_USBMSC_H
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <stdlib.h>
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-/* Configuration ************************************************************/
-
-#ifndef CONFIG_EXAMPLES_USBMSC_NLUNS
-#  define CONFIG_EXAMPLES_USBMSC_NLUNS 1
-#endif
-
-#ifndef CONFIG_EXAMPLES_USBMSC_DEVMINOR1
-#  define CONFIG_EXAMPLES_USBMSC_DEVMINOR1 0
-#endif
-
-#ifndef CONFIG_EXAMPLES_USBMSC_DEVPATH1
-#  define CONFIG_EXAMPLES_USBMSC_DEVPATH1 "/dev/mmcsd0"
-#endif
-
-#if CONFIG_EXAMPLES_USBMSC_NLUNS > 1
-#  ifndef CONFIG_EXAMPLES_USBMSC_DEVMINOR2
-#    error "CONFIG_EXAMPLES_USBMSC_DEVMINOR2 for LUN=2"
-#  endif
-#  ifndef CONFIG_EXAMPLES_USBMSC_DEVPATH2
-#    error "CONFIG_EXAMPLES_USBMSC_DEVPATH2 for LUN=2"
-#  endif
-#  if CONFIG_EXAMPLES_USBMSC_NLUNS > 2
-#    ifndef CONFIG_EXAMPLES_USBMSC_DEVMINOR3
-#      error "CONFIG_EXAMPLES_USBMSC_DEVMINOR2 for LUN=3"
-#    endif
-#    ifndef CONFIG_EXAMPLES_USBMSC_DEVPATH2
-#      error "CONFIG_EXAMPLES_USBMSC_DEVPATH2 for LUN=3"
-#    endif
-#    if CONFIG_EXAMPLES_USBMSC_NLUNS > 3
-#      error "CONFIG_EXAMPLES_USBMSC_NLUNS must be {1,2,3}"
-#    endif
-#  endif
-#endif
-
-/* Debug ********************************************************************/
-
-#ifdef CONFIG_CPP_HAVE_VARARGS
-#  ifdef CONFIG_DEBUG
-#    define message(...) lowsyslog(__VA_ARGS__)
-#    define msgflush()
-#  else
-#    define message(...) printf(__VA_ARGS__)
-#    define msgflush() fflush(stdout)
-#  endif
-#else
-#  ifdef CONFIG_DEBUG
-#    define message lowsyslog
-#    define msgflush()
-#  else
-#    define message printf
-#    define msgflush() fflush(stdout)
-#  endif
-#endif
-
-/****************************************************************************
- * Public Types
- ****************************************************************************/
-
-/* All global variables used by this example are packed into a structure in
- * order to avoid name collisions.
- */
-
-#if defined(CONFIG_NSH_BUILTIN_APPS) || defined(CONFIG_EXAMPLES_USBMSC_DEBUGMM)
-struct usbmsc_state_s
-{
-  /* This is the handle that references to this particular USB storage driver
-   * instance.  It is only needed if the USB mass storage device example is
-   * built using CONFIG_NSH_BUILTIN_APPS.  In this case, the value
-   * of the driver handle must be remembered between the 'msconn' and 'msdis'
-   * commands.
-   */
-
-#ifdef CONFIG_NSH_BUILTIN_APPS
-  FAR void *mshandle;
-#endif
-
-  /* Heap usage samples.  These are useful for checking USB storage memory
-   * usage and for tracking down memoryh leaks.
-   */
-
-#ifdef CONFIG_EXAMPLES_USBMSC_DEBUGMM
-  struct mallinfo mmstart;    /* Memory usage before the connection */
-  struct mallinfo mmprevious; /* The last memory usage sample */
-  struct mallinfo mmcurrent;  /* The current memory usage sample */
-#endif
-};
-#endif
-
-/****************************************************************************
- * Public Data
- ****************************************************************************/
-
-/* All global variables used by this example are packed into a structure in
- * order to avoid name collisions.
- */
-
-#if defined(CONFIG_NSH_BUILTIN_APPS) || defined(CONFIG_EXAMPLES_USBMSC_DEBUGMM)
-extern struct usbmsc_state_s g_usbmsc;
-#endif
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: usbmsc_archinitialize
- *
- * Description:
- *   Perform architecture specific initialization.  This function must
- *   configure the block device to export via USB.  This function must be
- *   provided by architecture-specific logic in order to use this example.
- *
- ****************************************************************************/
-
-extern int usbmsc_archinitialize(void);
-
-#endif /* __EXAMPLES_USBSTORAGE_USBMSC_H */
diff --git a/apps/examples/usbstorage/usbmsc_main.c b/apps/examples/usbstorage/usbmsc_main.c
deleted file mode 100644
index 5c0ae232e..000000000
--- a/apps/examples/usbstorage/usbmsc_main.c
+++ /dev/null
@@ -1,588 +0,0 @@
-/****************************************************************************
- * examples/usbstorage/usbmsc_main.c
- *
- *   Copyright (C) 2008-2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <debug.h>
-
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-
-#include "usbmsc.h"
-
-/****************************************************************************
- * Definitions
- ****************************************************************************/
-
-#ifdef CONFIG_EXAMPLES_USBMSC_TRACEINIT
-#  define TRACE_INIT_BITS       (TRACE_INIT_BIT)
-#else
-#  define TRACE_INIT_BITS       (0)
-#endif
-
-#define TRACE_ERROR_BITS        (TRACE_DEVERROR_BIT|TRACE_CLSERROR_BIT)
-
-#ifdef CONFIG_EXAMPLES_USBMSC_TRACECLASS
-#  define TRACE_CLASS_BITS      (TRACE_CLASS_BIT|TRACE_CLASSAPI_BIT|TRACE_CLASSSTATE_BIT)
-#else
-#  define TRACE_CLASS_BITS      (0)
-#endif
-
-#ifdef CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS
-#  define TRACE_TRANSFER_BITS   (TRACE_OUTREQQUEUED_BIT|TRACE_INREQQUEUED_BIT|TRACE_READ_BIT|\
-                                 TRACE_WRITE_BIT|TRACE_COMPLETE_BIT)
-#else
-#  define TRACE_TRANSFER_BITS   (0)
-#endif
-
-#ifdef CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER
-#  define TRACE_CONTROLLER_BITS (TRACE_EP_BIT|TRACE_DEV_BIT)
-#else
-#  define TRACE_CONTROLLER_BITS (0)
-#endif
-
-#ifdef CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS
-#  define TRACE_INTERRUPT_BITS  (TRACE_INTENTRY_BIT|TRACE_INTDECODE_BIT|TRACE_INTEXIT_BIT)
-#else
-#  define TRACE_INTERRUPT_BITS  (0)
-#endif
-
-#define TRACE_BITSET            (TRACE_INIT_BITS|TRACE_ERROR_BITS|TRACE_CLASS_BITS|\
-                                 TRACE_TRANSFER_BITS|TRACE_CONTROLLER_BITS|TRACE_INTERRUPT_BITS)
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-/* All global variables used by this example are packed into a structure in
- * order to avoid name collisions.
- */
-
-#if defined(CONFIG_NSH_BUILTIN_APPS) || defined(CONFIG_EXAMPLES_USBMSC_DEBUGMM)
-struct usbmsc_state_s g_usbmsc;
-#endif
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: show_memory_usage
- ****************************************************************************/
-
-#ifdef CONFIG_EXAMPLES_USBMSC_DEBUGMM
-static void show_memory_usage(struct mallinfo *mmbefore,
-                              struct mallinfo *mmafter)
-{
-  int diff;
-
-  message("              total       used       free    largest\n");
-  message("Before:%11d%11d%11d%11d\n",
-             mmbefore->arena, mmbefore->uordblks, mmbefore->fordblks, mmbefore->mxordblk);
-  message("After: %11d%11d%11d%11d\n",
-             mmafter->arena, mmafter->uordblks, mmafter->fordblks, mmafter->mxordblk);
-
-  diff = mmbefore->uordblks - mmafter->uordblks;
-  if (diff < 0)
-    {
-      message("Change:%11d allocated\n", -diff);
-    }
-  else if (diff > 0)
-    {
-      message("Change:%11d freed\n", diff);
-    }
-}
-#else
-# define show_memory_usage(mm1, mm2)
-#endif
-
-/****************************************************************************
- * Name: check_test_memory_usage
- ****************************************************************************/
-
-#ifdef CONFIG_EXAMPLES_USBMSC_DEBUGMM
-static void check_test_memory_usage(FAR const char *msg)
-{
-  /* Get the current memory usage */
-
-#ifdef CONFIG_CAN_PASS_STRUCTS
-  g_usbmsc.mmcurrent = mallinfo();
-#else
-  (void)mallinfo(&g_usbmsc.mmcurrent);
-#endif
-
-  /* Show the change from the previous time */
-
-  message("\%s:\n", msg);
-  show_memory_usage(&g_usbmsc.mmprevious, &g_usbmsc.mmcurrent);
-
-  /* Set up for the next test */
-
-#ifdef CONFIG_CAN_PASS_STRUCTS
-  g_usbmsc.mmprevious = g_usbmsc.mmcurrent;
-#else
-  memcpy(&g_usbmsc.mmprevious, &g_usbmsc.mmcurrent, sizeof(struct mallinfo));
-#endif
-}
-#else
-#  define check_test_memory_usage(msg)
-#endif
-
-/****************************************************************************
- * Name: check_test_memory_usage
- ****************************************************************************/
-
-#ifdef CONFIG_EXAMPLES_USBMSC_DEBUGMM
-static void final_memory_usage(FAR const char *msg)
-{
-  /* Get the current memory usage */
-
-#ifdef CONFIG_CAN_PASS_STRUCTS
-  g_usbmsc.mmcurrent = mallinfo();
-#else
-  (void)mallinfo(&g_usbmsc.mmcurrent);
-#endif
-
-  /* Show the change from the previous time */
-
-  message("\n%s:\n", msg);
-  show_memory_usage(&g_usbmsc.mmstart, &g_usbmsc.mmcurrent);
-}
-#else
-#  define final_memory_usage(msg)
-#endif
-
-/****************************************************************************
- * Name: usbmsc_enumerate
- ****************************************************************************/
-
-#ifdef CONFIG_USBDEV_TRACE
-static int usbmsc_enumerate(struct usbtrace_s *trace, void *arg)
-{
-  switch (trace->event)
-    {
-    case TRACE_DEVINIT:
-      message("USB controller initialization: %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVUNINIT:
-      message("USB controller un-initialization: %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVREGISTER:
-      message("usbdev_register(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVUNREGISTER:
-      message("usbdev_unregister(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPCONFIGURE:
-      message("Endpoint configure(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPDISABLE:
-      message("Endpoint disable(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPALLOCREQ:
-      message("Endpoint allocreq(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPFREEREQ:
-      message("Endpoint freereq(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPALLOCBUFFER:
-      message("Endpoint allocbuffer(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPFREEBUFFER:
-      message("Endpoint freebuffer(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPSUBMIT:
-      message("Endpoint submit(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPCANCEL:
-      message("Endpoint cancel(): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPSTALL:
-      message("Endpoint stall(true): %04x\n", trace->value);
-      break;
-
-    case TRACE_EPRESUME:
-      message("Endpoint stall(false): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVALLOCEP:
-      message("Device allocep(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVFREEEP:
-      message("Device freeep(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVGETFRAME:
-      message("Device getframe(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVWAKEUP:
-      message("Device wakeup(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVSELFPOWERED:
-      message("Device selfpowered(): %04x\n", trace->value);
-      break;
-
-    case TRACE_DEVPULLUP:
-      message("Device pullup(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSBIND:
-      message("Class bind(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSUNBIND:
-      message("Class unbind(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSDISCONNECT:
-      message("Class disconnect(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSSETUP:
-      message("Class setup(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSSUSPEND:
-      message("Class suspend(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSRESUME:
-      message("Class resume(): %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSRDCOMPLETE:
-      message("Class RD request complete: %04x\n", trace->value);
-      break;
-
-    case TRACE_CLASSWRCOMPLETE:
-      message("Class WR request complete: %04x\n", trace->value);
-      break;
-
-    default:
-      switch (TRACE_ID(trace->event))
-        {
-        case TRACE_CLASSAPI_ID:        /* Other class driver system API calls */
-          message("Class API call %d: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_CLASSSTATE_ID:      /* Track class driver state changes */
-          message("Class state %d: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_INTENTRY_ID:        /* Interrupt handler entry */
-          message("Interrrupt %d entry: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_INTDECODE_ID:       /* Decoded interrupt trace->event */
-          message("Interrrupt decode %d: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_INTEXIT_ID:         /* Interrupt handler exit */
-          message("Interrrupt %d exit: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_OUTREQQUEUED_ID:    /* Request queued for OUT endpoint */
-          message("EP%d OUT request queued: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_INREQQUEUED_ID:     /* Request queued for IN endpoint */
-          message("EP%d IN request queued: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_READ_ID:            /* Read (OUT) action */
-          message("EP%d OUT read: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_WRITE_ID:           /* Write (IN) action */
-          message("EP%d IN write: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_COMPLETE_ID:        /* Request completed */
-          message("EP%d request complete: %04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_DEVERROR_ID:        /* USB controller driver error event */
-          message("Controller error: %02x:%04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        case TRACE_CLSERROR_ID:        /* USB class driver error event */
-          message("Class error: %02x:%04x\n", TRACE_DATA(trace->event), trace->value);
-          break;
-
-        default:
-          message("Unrecognized event: %02x:%02x:%04x\n",
-                  TRACE_ID(trace->event) >> 8, TRACE_DATA(trace->event), trace->value);
-          break;
-        }
-    }
-  return OK;
-}
-#endif
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * msconn_main
- *
- * Description:
- *   This is the main program that configures the USB mass storage device
- *   and exports the LUN(s).  If CONFIG_NSH_BUILTIN_APPS is defined
- *   in the NuttX configuration, then this program can be executed by
- *   entering the "msconn" command at the NSH console.
- *
- ****************************************************************************/
-
-int msconn_main(int argc, char *argv[])
-{
-  FAR void *handle;
-  int ret;
-
-  /* If this program is implemented as the NSH 'msconn' command, then we need to
-   * do a little error checking to assure that we are not being called re-entrantly.
-   */
-
-#ifdef CONFIG_NSH_BUILTIN_APPS
-
-   /* Check if there is a non-NULL USB mass storage device handle (meaning that the
-    * USB mass storage device is already configured).
-    */
-
-   if (g_usbmsc.mshandle)
-     {
-       message("msconn_main: ERROR: Already connected\n");
-       return 1;
-     }
-#endif
-
-#ifdef CONFIG_EXAMPLES_USBMSC_DEBUGMM
-#  ifdef CONFIG_CAN_PASS_STRUCTS
-  g_usbmsc.mmstart    = mallinfo();
-  g_usbmsc.mmprevious = g_usbmsc.mmstart;
-#  else
-  (void)mallinfo(&g_usbmsc.mmstart);
-  memcpy(&g_usbmsc.mmprevious, &g_usbmsc.mmstart, sizeof(struct mallinfo));
-#  endif
-#endif
-
-  /* Initialize USB trace output IDs */
-
-  usbtrace_enable(TRACE_BITSET);
-  check_test_memory_usage("After usbtrace_enable()");
-
-  /* Register block drivers (architecture-specific) */
-
-  message("msconn_main: Creating block drivers\n");
-  ret = usbmsc_archinitialize();
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_archinitialize failed: %d\n", -ret);
-      return 2;
-    }
-  check_test_memory_usage("After usbmsc_archinitialize()");
-
-  /* Then exports the LUN(s) */
-
-  message("msconn_main: Configuring with NLUNS=%d\n", CONFIG_EXAMPLES_USBMSC_NLUNS);
-  ret = usbmsc_configure(CONFIG_EXAMPLES_USBMSC_NLUNS, &handle);
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_configure failed: %d\n", -ret);
-      usbmsc_uninitialize(handle);
-      return 3;
-    }
-  message("msconn_main: handle=%p\n", handle);
-  check_test_memory_usage("After usbmsc_configure()");
-
-  message("msconn_main: Bind LUN=0 to %s\n", CONFIG_EXAMPLES_USBMSC_DEVPATH1);
-  ret = usbmsc_bindlun(handle, CONFIG_EXAMPLES_USBMSC_DEVPATH1, 0, 0, 0, false);
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_bindlun failed for LUN 1 using %s: %d\n",
-               CONFIG_EXAMPLES_USBMSC_DEVPATH1, -ret);
-      usbmsc_uninitialize(handle);
-      return 4;
-    }
-  check_test_memory_usage("After usbmsc_bindlun()");
-
-#if CONFIG_EXAMPLES_USBMSC_NLUNS > 1
-
-  message("msconn_main: Bind LUN=1 to %s\n", CONFIG_EXAMPLES_USBMSC_DEVPATH2);
-  ret = usbmsc_bindlun(handle, CONFIG_EXAMPLES_USBMSC_DEVPATH2, 1, 0, 0, false);
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_bindlun failed for LUN 2 using %s: %d\n",
-               CONFIG_EXAMPLES_USBMSC_DEVPATH2, -ret);
-      usbmsc_uninitialize(handle);
-      return 5;
-    }
-  check_test_memory_usage("After usbmsc_bindlun() #2");
-
-#if CONFIG_EXAMPLES_USBMSC_NLUNS > 2
-
-  message("msconn_main: Bind LUN=2 to %s\n", CONFIG_EXAMPLES_USBMSC_DEVPATH3);
-  ret = usbmsc_bindlun(handle, CONFIG_EXAMPLES_USBMSC_DEVPATH3, 2, 0, 0, false);
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_bindlun failed for LUN 3 using %s: %d\n",
-               CONFIG_EXAMPLES_USBMSC_DEVPATH3, -ret);
-      usbmsc_uninitialize(handle);
-      return 6;
-    }
-  check_test_memory_usage("After usbmsc_bindlun() #3");
-
-#endif
-#endif
-
-  ret = usbmsc_exportluns(handle);
-  if (ret < 0)
-    {
-      message("msconn_main: usbmsc_exportluns failed: %d\n", -ret);
-      usbmsc_uninitialize(handle);
-      return 7;
-    }
-  check_test_memory_usage("After usbmsc_exportluns()");
-
-  /* It this program was configued as an NSH command, then just exit now.
-   * Also, if signals are not enabled (and, hence, sleep() is not supported.
-   * then we have not real option but to exit now.
-   */
-
-#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_DISABLE_SIGNALS)
-
-  /* Otherwise, this thread will hang around and monitor the USB storage activity */
-
-  for (;;)
-    {
-      msgflush();
-      sleep(5);
-
-#  ifdef CONFIG_USBDEV_TRACE
-      message("\nmsconn_main: USB TRACE DATA:\n");
-      ret =  usbtrace_enumerate(usbmsc_enumerate, NULL);
-      if (ret < 0)
-        {
-          message("msconn_main: usbtrace_enumerate failed: %d\n", -ret);
-          usbmsc_uninitialize(handle);
-          return 8;
-        }
-      check_test_memory_usage("After usbtrace_enumerate()");
-#  else
-      message("msconn_main: Still alive\n");
-#  endif
-    }
-#elif defined(CONFIG_NSH_BUILTIN_APPS)
-
-   /* Return the USB mass storage device handle so it can be used by the 'misconn'
-    * command.
-    */
-
-   message("msconn_main: Connected\n");
-   g_usbmsc.mshandle = handle;
-   check_test_memory_usage("After MS connection");
-
-#else /* defined(CONFIG_DISABLE_SIGNALS) */
-
-  /* Just exit */
- 
-   message("msconn_main: Exiting\n");
-
-   /* Dump debug memory usage */
- 
-   final_memory_usage("Final memory usage");
-#endif
-   return 0;
-}
-
-/****************************************************************************
- * msdis_main
- *
- * Description:
- *   This is a program entry point that will disconnet the USB mass storage
- *   device.  This program is only available if CONFIG_NSH_BUILTIN_APPS
- *   is defined in the NuttX configuration.  In that case, this program can
- *   be executed by entering the "msdis" command at the NSH console.
- *
- ****************************************************************************/
-
-#ifdef CONFIG_NSH_BUILTIN_APPS
-int msdis_main(int argc, char *argv[])
-{
-  /* First check if the USB mass storage device is already connected */
-
-  if (!g_usbmsc.mshandle)
-    {
-      message("msdis: ERROR: Not connected\n");
-      return 1;
-    }
-   check_test_memory_usage("Since MS connection");
-
-  /* Then disconnect the device and uninitialize the USB mass storage driver */
-
-   usbmsc_uninitialize(g_usbmsc.mshandle);
-   g_usbmsc.mshandle = NULL;
-   message("msdis: Disconnected\n");
-   check_test_memory_usage("After usbmsc_uninitialize()");
-
-   /* Dump debug memory usage */
-
-   final_memory_usage("Final memory usage");
-   return 0;
-}
-#endif