Remove stm32f100rc_generic board configuration

15 files changed, 2236 insertions, 0 deletions

diff --git a/misc/Obsoleted/ChangeLog b/misc/Obsoleted/ChangeLog
index dc86c53e5..511e2224a 100644
--- a/misc/Obsoleted/ChangeLog
+++ b/misc/Obsoleted/ChangeLog
@@ -35,3 +35,18 @@ ChangeLog
   REMOVAL PATCH:
     misc/Obsoleted/Patches/Remove-16z-2014-9-5.patch
 
+2014-11-10:  Removed support for the stm32f100rc_generic board configuration
+
+  REASON
+    This support was obsoleted because of a decision to stop support of
+    generic board configurations. Generic board configurations do not
+    provide support for any specific hardware but can be useful only if
+    there are not other examples for the setup for a particular
+    architecture.
+
+  NEW HOME:
+   misc/Obsoleted/configs/stm32f100rc_generic
+
+  REMOVAL PATCH
+    misc/Obsoleted/Patches/Remove-stm32f100rc_generic-2014-11-10.patch
+ 
\ No newline at end of file
diff --git a/misc/Obsoleted/Patches/Remove-stm32f100rc_generic-2014-11-10.patch b/misc/Obsoleted/Patches/Remove-stm32f100rc_generic-2014-11-10.patch
new file mode 100644
index 000000000..a84506185
--- /dev/null
+++ b/misc/Obsoleted/Patches/Remove-stm32f100rc_generic-2014-11-10.patch
@@ -0,0 +1,132 @@
+diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
+index 6c54d68..02a55b3 100644
+--- a/nuttx/Documentation/NuttX.html
++++ b/nuttx/Documentation/NuttX.html
+@@ -8,7 +8,7 @@
+   <tr align="center" bgcolor="#e4e4e4">
+     <td>
+       <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
+-      <p>Last Updated: November 3, 2014</p>
++      <p>Last Updated: November 11, 2014</p>
+     </td>
+   </tr>
+ </table>
+@@ -2487,10 +2487,17 @@ nsh>
+         </li>
+         <li>
+           <p>
+-            <b>Generic Board Support</b>
++            <b>Generic Board Support (obsoleted)</b>
+             This logic was extended to support the <i>high density</i> STM32F100RC chips by Freddie Chopin
+             There is <i>generic</i> support for STM32F100RC boards.
+-            Refer to the NuttX board <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/stm32f100rc_generic/README.txt">README</a> file for further information.
++            Refer to the NuttX board <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/Obsoleted/configs/stm32f100rc_generic/README.txt">README</a> file for further information.
++          </p>
++          <p>
++            <b><i>Obsoleted</i></b>.
++            This generic board supported has been <i>obsoleted</i>.
++            The code has been moved out of the NuttX source tree but can still be found be found in <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/Obsoleted/">Obsoleted</a> directory.
++            This support was obsoleted because of a decision to stop support of <i>generic</i> board configurations.
++            Generic board configurations do not provide support for any specific hardware but can be useful only if there are not other examples for the setup for a particular architecture.
+           </p>
+        </li>
+        <li>
+@@ -4153,7 +4160,7 @@ BFD_ASSERT (*plt_offset != (bfd_vma) -1);
+       </p>
+     <p>
+       <b><i>Obsoleted</i></b>.
+-      This architecture has been <i>obsoleted</i>.
++      This board support has been <i>obsoleted</i>.
+       The code has been moved out of the NuttX source tree but can still be found be found in <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/misc/Obsoleted/">Obsoleted</a> directory.
+       This support was obsoleted because of technical issues that make NuttX unusable on the board at least in the short term.  This configuration may return to the NuttX source tree at some time in the future.
+     </p>
+diff --git a/nuttx/Documentation/README.html b/nuttx/Documentation/README.html
+index a15681e..95b5760 100644
+--- a/nuttx/Documentation/README.html
++++ b/nuttx/Documentation/README.html
+@@ -8,7 +8,7 @@
+   <tr align="center" bgcolor="#e4e4e4">
+     <td>
+       <h1><big><font color="#3c34ec"><i>NuttX README Files</i></font></big></h1>
+-      <p>Last Updated:  November 7, 2014</p>
++      <p>Last Updated:  November 11, 2014</p>
+     </td>
+   </tr>
+ </table>
+@@ -213,8 +213,6 @@
+  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/stm3240g-eval/README.txt"><b><i>README.txt</i></b></a>
+  |   |   |- stm32_tiny/
+  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/stm32_tiny/README.txt"><b><i>README.txt</i></b></a>
+- |   |   |- stm32f100rc_generic/
+- |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/stm32f100rc_generic/README.txt"><b><i>README.txt</i></b></a>
+  |   |   |- stm32f3discovery/
+  |   |   |   `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/stm32f3discovery/README.txt"><b><i>README.txt</i></b></a>
+  |   |   |- stm32f4discovery/
+diff --git a/nuttx/README.txt b/nuttx/README.txt
+index e1b9f94..2862116 100644
+--- a/nuttx/README.txt
++++ b/nuttx/README.txt
+@@ -1167,8 +1167,6 @@ nuttx
+  |   |   `- README.txt
+  |   |- stm32_tiny/
+  |   |   `- README.txt
+- |   |- stm32f100rc_generic/
+- |   |   `- README.txt
+  |   |- stm32f3discovery/
+  |   |   `- README.txt
+  |   |- stm32f4discovery/
+diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
+index de1380c..e2230b0 100755
+--- a/nuttx/configs/Kconfig
++++ b/nuttx/configs/Kconfig
+@@ -734,15 +734,6 @@ config ARCH_BOARD_STM3240G_EVAL
+ 		microcontroller (ARM Cortex-M4 with FPU).  This port uses a GNU Cortex-M4
+ 		toolchain (such as CodeSourcery).
+ 
+-config ARCH_BOARD_STM32F100RC_GENERIC
+-	bool "STMicro STM32F100RC generic board"
+-	depends on ARCH_CHIP_STM32F100RC
+-	select ARCH_HAVE_LEDS
+-	select ARCH_HAVE_BUTTONS
+-	select ARCH_HAVE_IRQBUTTONS
+-	---help---
+-		STMicro STM32F100RC generic board.
+-
+ config ARCH_BOARD_STM32F3_DISCOVERY
+ 	bool "STMicro STM32F3-Discovery board"
+ 	depends on ARCH_CHIP_STM32F303VC
+@@ -1085,7 +1076,6 @@ config ARCH_BOARD
+ 	default "stm3210e-eval"            if ARCH_BOARD_STM3210E_EVAL
+ 	default "stm3220g-eval"            if ARCH_BOARD_STM3220G_EVAL
+ 	default "stm3240g-eval"            if ARCH_BOARD_STM3240G_EVAL
+-	default "stm32f100rc_generic"      if ARCH_BOARD_STM32F100RC_GENERIC
+ 	default "stm32f3discovery"         if ARCH_BOARD_STM32F3_DISCOVERY
+ 	default "stm32f4discovery"         if ARCH_BOARD_STM32F4_DISCOVERY
+ 	default "stm32f429i-disco"         if ARCH_BOARD_STM32F429I_DISCO
+@@ -1378,9 +1368,6 @@ endif
+ if ARCH_BOARD_STM3240G_EVAL
+ source "configs/stm3240g-eval/Kconfig"
+ endif
+-if ARCH_BOARD_STM32F100RC_GENERIC
+-source "configs/stm32f100rc_generic/Kconfig"
+-endif
+ if ARCH_BOARD_STM32F4_DISCOVERY
+ source "configs/stm32f4discovery/Kconfig"
+ endif
+diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
+index c24e18b..78cc7a1 100644
+--- a/nuttx/configs/README.txt
++++ b/nuttx/configs/README.txt
+@@ -543,12 +543,6 @@ configs/stm3240g-eval
+   microcontroller (ARM Cortex-M4 with FPU).  This port uses a GNU Cortex-M4
+   toolchain (such as CodeSourcery).
+ 
+-configs/stm32f100rc_generic
+-  STMicro STM32F100RC generic board based on STM32F100RC high-density value line
+-  chip. This "generic" configuration is not very usable out-of-box, but can be
+-  used as a starting point to creating new configs with similar STM32
+-  high-density value line chips.
+-
+ configs/stm32f4discovery
+   STMicro STM32F4-Discovery board based on the STMIcro STM32F407VGT6 MCU.
+ 
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig b/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig
new file mode 100644
index 000000000..c5af1e0a4
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig
@@ -0,0 +1,59 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_STM32F100RC_GENERIC
+comment "STM32F100RC Generic Hardware Configuration"
+
+config PM_BUTTONS
+	bool "PM Button support"
+	default n
+	depends on PM && ARCH_IRQBUTTONS
+	---help---
+		Enable PM button EXTI interrupts to support PM testing
+
+config PM_BUTTON_ACTIVITY
+	int "Button PM activity weight"
+	default 10
+	depends on PM_BUTTONS
+	---help---
+		The activity weight to report to the power management subsystem when a button is pressed.
+
+config PM_ALARM_SEC
+	int "PM_STANDBY delay (seconds)"
+	default 15
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
+
+config PM_ALARM_NSEC
+	int "PM_STANDBY delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP
+	bool "PM_SLEEP wake-up alarm"
+	default n
+	depends on PM && RTC_ALARM
+	---help---
+		Wake-up of PM_SLEEP mode after a delay and resume normal operation.
+
+config PM_SLEEP_WAKEUP_SEC
+	int "PM_SLEEP delay (seconds)"
+	default 10
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP_NSEC
+	int "PM_SLEEP delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode.
+
+endif
+
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/README.txt b/misc/Obsoleted/configs/stm32f100rc_generic/README.txt
new file mode 100644
index 000000000..e77976038
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/README.txt
@@ -0,0 +1,469 @@
+README
+======
+
+This README discusses issues unique to NuttX configurations for the STMicro
+STM32F100RC generic board. This "generic" configuration is not very usable
+out-of-box, but can be used as a starting point to creating new configs with
+similar STM32 high-density value line chips. As a bare-minimum this config only
+specifies one LED (on PA0) and one button (on PA1), you should change that to
+match your hardware (some details below and in source files).
+
+Contents
+========
+
+  - Development Environment
+  - GNU Toolchain Options
+  - IDEs
+  - NuttX EABI "buildroot" Toolchain
+  - NuttX OABI "buildroot" Toolchain
+  - NXFLAT Toolchain
+  - LEDs
+  - UARTs
+  - "STMicro STM32F100RC generic" specific Configuration Options
+  - Configurations
+
+Development Environment
+=======================
+
+  Either Linux or Cygwin on Windows can be used for the development environment.
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems.
+
+GNU Toolchain Options
+=====================
+
+  Toolchain Configurations
+  ------------------------
+  The NuttX make system has been modified to support the following different
+  toolchain options.
+
+  1. The CodeSourcery GNU toolchain,
+  2. The Atollic Toolchain,
+  3. The devkitARM GNU toolchain,
+  4. Raisonance GNU toolchain, or
+  5. The NuttX buildroot Toolchain (see below).
+
+  All testing has been conducted using the CodeSourcery toolchain for Windows.  To use
+  the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
+  add one of the following configuration options to your .config (or defconfig)
+  file:
+
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y        : The Atollic toolchain under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+
+  If you change the default toolchain, then you may also have to modify the PATH in
+  the setenv.sh file if your make cannot find the tools.
+
+  NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
+  Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
+  toolchains are Cygwin and/or Linux native toolchains. There are several limitations
+  to using a Windows based toolchain in a Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had no effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+       MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+
+  The CodeSourcery Toolchain (2009q1)
+  -----------------------------------
+  The CodeSourcery toolchain (2009q1) does not work with default optimization
+  level of -Os (See Make.defs).  It will work with -O0, -O1, or -O2, but not with
+  -Os.
+
+  The Atollic "Pro" and "Lite" Toolchain
+  --------------------------------------
+  One problem that I had with the Atollic toolchains is that the provide a gcc.exe
+  and g++.exe in the same bin/ file as their ARM binaries.  If the Atollic bin/ path
+  appears in your PATH variable before /usr/bin, then you will get the wrong gcc
+  when you try to build host executables.  This will cause to strange, uninterpretable
+  errors build some host binaries in tools/ when you first make.
+
+  The Atollic "Lite" Toolchain
+  ----------------------------
+  The free, "Lite" version of the Atollic toolchain does not support C++ nor
+  does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
+  toolchain, you will have to set:
+
+    CONFIG_HAVE_CXX=n
+
+  In order to compile successfully.  Otherwise, you will get errors like:
+
+    "C++ Compiler only available in TrueSTUDIO Professional"
+
+  The make may then fail in some of the post link processing because of some of
+  the other missing tools.  The Make.defs file replaces the ar and nm with
+  the default system x86 tool versions and these seem to work okay.  Disable all
+  of the following to avoid using objcopy:
+
+    CONFIG_RRLOAD_BINARY=n
+    CONFIG_INTELHEX_BINARY=n
+    CONFIG_MOTOROLA_SREC=n
+    CONFIG_RAW_BINARY=n
+
+  devkitARM
+  ---------
+  The devkitARM toolchain includes a version of MSYS make.  Make sure that the
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+====
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project.
+
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/stm32,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/stm32/stm32_vectors.S.  With RIDE, I have to build NuttX
+  one time from the Cygwin command line in order to obtain the pre-built
+  startup object needed by RIDE.
+
+NuttX EABI "buildroot" Toolchain
+================================
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh stm32f100rc_generic/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  details PLUS some special instructions that you will need to follow if you are
+  building a Cortex-M3 toolchain for Cygwin under Windows.
+
+  NOTE:  Unfortunately, the 4.6.3 EABI toolchain is not compatible with the
+  the NXFLAT tools.  See the top-level TODO file (under "Binary loaders") for
+  more information about this problem. If you plan to use NXFLAT, please do not
+  use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain.
+  See instructions below.
+
+NuttX OABI "buildroot" Toolchain
+================================
+
+  The older, OABI buildroot toolchain is also available.  To use the OABI
+  toolchain:
+
+  1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3
+     configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI
+     configuration such as cortexm3-defconfig-4.3.3
+
+  2. Modify the Make.defs file to use the OABI conventions:
+
+    +CROSSDEV = arm-nuttx-elf-
+    +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+    +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
+    -CROSSDEV = arm-nuttx-eabi-
+    -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+    -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+
+NXFLAT Toolchain
+================
+
+  If you are *not* using the NuttX buildroot toolchain and you want to use
+  the NXFLAT tools, then you will still have to build a portion of the buildroot
+  tools -- just the NXFLAT tools.  The buildroot with the NXFLAT tools can
+  be downloaded from the NuttX SourceForge download site
+  (https://sourceforge.net/projects/nuttx/files/).
+
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh lpcxpresso-lpc1768/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-nxflat .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly builtNXFLAT binaries.
+
+LEDs
+====
+
+It is asumed that STMicro STM32F100RC generic board board has one LED on PA0.
+You should configure the port and pin number in
+configs/stm32f100rc_generic/src/stm32f100rc_internal.h. This LED is not used by
+the board port unless CONFIG_ARCH_LEDS is defined.  In that case, the usage by
+the board port is defined in include/board.h and src/up_leds.c. The LED is used
+to encode OS-related events as follows:
+
+  SYMBOL                Meaning                 LED1*
+                                                green
+  -------------------  -----------------------  -------
+  LED_STARTED          NuttX has been started   ON
+  LED_HEAPALLOCATE     Heap has been allocated  ON
+  LED_IRQSENABLED      Interrupts enabled       ON
+  LED_STACKCREATED     Idle stack created       ON
+  LED_INIRQ            In an interrupt          ON
+  LED_SIGNAL           In a signal handler      ON
+  LED_ASSERTION        An assertion failed      OFF
+  LED_PANIC            The system has crashed   OFF
+
+So basically if the LED is off it means that there is a problem.
+
+UART
+====
+
+Default USART/UART Configuration
+--------------------------------
+
+USART2 is enabled in all configurations (see */defconfig).  RX and TX are
+configured on pins PA3 and PA2, respectively.
+
+"STMicro STM32F100RC generic" specific Configuration Options
+============================================================
+
+    CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+       be set to:
+
+       CONFIG_ARCH=arm
+
+    CONFIG_ARCH_family - For use in C code:
+
+       CONFIG_ARCH_ARM=y
+
+    CONFIG_ARCH_architecture - For use in C code:
+
+       CONFIG_ARCH_CORTEXM3=y
+
+    CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+       CONFIG_ARCH_CHIP=stm32
+
+    CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+       chip:
+
+       CONFIG_ARCH_CHIP_STM32F100RC=y
+
+    CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
+       configuration features.
+
+       CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
+
+    CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+       hence, the board that supports the particular chip or SoC.
+
+       CONFIG_ARCH_BOARD=stm32f100rc_generic
+
+    CONFIG_ARCH_BOARD_name - For use in C code
+
+       CONFIG_ARCH_BOARD_STM32F100RC_GENERIC=y
+
+    CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+       of delay loops
+
+    CONFIG_ENDIAN_BIG - define if big endian (default is little
+       endian)
+
+    CONFIG_RAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+       CONFIG_RAM_SIZE=24576 (24kB)
+
+    CONFIG_RAM_START - The start address of installed DRAM
+
+       CONFIG_RAM_START=0x20000000
+
+    CONFIG_ARCH_LEDS - Use LED to show state. Unique to boards that have LED(s)
+
+    CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+       stack. If defined, this symbol is the size of the interrupt
+       stack in bytes.  If not defined, the user task stacks will be
+       used during interrupt handling.
+
+    CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+    CONFIG_ARCH_CALIBRATION - when used togeter with CONFIG_DEBUG enables some
+	   build in instrumentation that cause a 100 second delay during boot-up.
+	   This 100 second delay serves no purpose other than it allows you to
+	   calibratre CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to
+	   measure the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+       the delay actually is 100 seconds.
+
+  Individual subsystems can be enabled:
+
+    AHB
+    ----
+    CONFIG_STM32_CRC
+    CONFIG_STM32_DMA1
+    CONFIG_STM32_DMA2
+
+    APB1
+    ----
+    CONFIG_STM32_TIM2
+    CONFIG_STM32_TIM3
+    CONFIG_STM32_TIM4
+    CONFIG_STM32_TIM5
+    CONFIG_STM32_TIM6
+    CONFIG_STM32_TIM7
+    CONFIG_STM32_TIM12
+    CONFIG_STM32_TIM13
+    CONFIG_STM32_TIM14
+	CONFIG_STM32_RTC
+    CONFIG_STM32_WWDG
+    CONFIG_STM32_IWDG
+    CONFIG_STM32_SPI2
+    CONFIG_STM32_SPI3
+    CONFIG_STM32_USART2
+    CONFIG_STM32_USART3
+    CONFIG_STM32_UART4
+    CONFIG_STM32_UART5
+    CONFIG_STM32_I2C1
+    CONFIG_STM32_I2C2
+	CONFIG_STM32_PWR -- Required for RTC
+	CONFIG_STM32_BKP -- Required for RTC
+    CONFIG_STM32_DAC1
+    CONFIG_STM32_DAC2
+	CONFIG_STM32_CEC
+
+    APB2
+    ----
+	CONFIG_STM32_ADC1
+    CONFIG_STM32_TIM1
+	CONFIG_STM32_SPI1
+    CONFIG_STM32_USART1
+    CONFIG_STM32_TIM15
+	CONFIG_STM32_TIM16
+	CONFIG_STM32_TIM17
+
+  Timer devices may be used for different purposes.  One special purpose is
+  to generate modulated outputs for such things as motor control.  If CONFIG_STM32_TIMn
+  is defined (as above) then the following may also be defined to indicate that
+  the timer is intended to be used for pulsed output modulation, ADC conversion,
+  or DAC conversion. Note that ADC/DAC require two definition:  Not only do you have
+  to assign the timer (n) for used by the ADC or DAC, but then you also have to
+  configure which ADC or DAC (m) it is assigned to.
+
+    CONFIG_STM32_TIMn_PWM   Reserve timer n for use by PWM, n=1,..,17
+    CONFIG_STM32_TIMn_ADC   Reserve timer n for use by ADC, n=1,..,17
+    CONFIG_STM32_TIMn_ADC1  Reserve timer n to trigger ADCm, n=1,..,17
+    CONFIG_STM32_TIMn_DAC   Reserve timer n for use by DAC, n=1,..,17
+    CONFIG_STM32_TIMn_DACm  Reserve timer n to trigger DACm, n=1,..,17, m=1,..,2
+
+  For each timer that is enabled for PWM usage, we need the following additional
+  configuration settings:
+
+    CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
+
+  NOTE: The STM32 timers are each capable of generating different signals on
+  each of the four channels with different duty cycles.  That capability is
+  not supported by this driver:  Only one output channel per timer.
+
+  JTAG Enable settings (by default full SWJ is enabled):
+
+    CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+    CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+      but without JNTRST.
+    CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+
+  STMicro STM32F100RC generic specific device driver settings
+
+    CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
+           m (m=4,5) for the console and ttys0 (default is the USART1).
+    CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_U[S]ARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+Configurations
+==============
+
+Each STMicro STM32F100RC generic configuration is maintained in a sub-directory
+and can be selected as follow:
+
+    cd tools
+    ./configure.sh stm32f100rc_generic/<subdir>
+    cd -
+    . ./setenv.sh
+
+Where <subdir> is one of the following:
+
+  nsh:
+  ---
+    Configures the NuttShell (nsh) located at apps/examples/nsh.  The
+    Configuration enables only the serial NSH interfaces.
+
+    Default toolchain:
+
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux / Mac OS X
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h b/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h
new file mode 100644
index 000000000..59c4b31cc
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h
@@ -0,0 +1,192 @@
+/************************************************************************************
+ * configs/stm32f100rc_generic/include/board.h
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+#include "stm32_rcc.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* On-board crystal frequency is 8MHz (HSE) */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+/* PLL source is HSE / 1, PLL multiplier is 3: PLL output frequency is 8MHz (XTAL) x 3 = 24MHz */
+
+#define STM32_CFGR2_PREDIV1     RCC_CFGR2_PREDIV1d1
+#define STM32_CFGR_PLLSRC       RCC_CFGR_PLLSRC
+#define STM32_CFGR_PLLXTPRE     0
+#define STM32_CFGR_PLLMUL       RCC_CFGR_PLLMUL_CLKx3
+#define STM32_PLL_FREQUENCY     (3 * STM32_BOARD_XTAL)
+
+/* Use the PLL and set the SYSCLK source to be the PLL */
+
+#define STM32_SYSCLK_SW         RCC_CFGR_SW_PLL
+#define STM32_SYSCLK_SWS        RCC_CFGR_SWS_PLL
+#define STM32_SYSCLK_FREQUENCY  STM32_PLL_FREQUENCY
+
+/* AHB clock (HCLK) is SYSCLK (24MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK
+#define STM32_HCLK_FREQUENCY    STM32_PLL_FREQUENCY
+
+/* APB2 clock (PCLK2) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK
+#define STM32_PCLK2_FREQUENCY   STM32_HCLK_FREQUENCY
+
+/* APB2 timers (1, 15-17) will receive PCLK2. */
+
+#define STM32_APB2_TIM1_CLKIN   STM32_PCLK2_FREQUENCY
+#define STM32_APB2_TIM15_CLKIN  STM32_PCLK2_FREQUENCY
+#define STM32_APB2_TIM16_CLKIN  STM32_PCLK2_FREQUENCY
+#define STM32_APB2_TIM17_CLKIN  STM32_PCLK2_FREQUENCY
+
+/* APB1 clock (PCLK1) is HCLK (24MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLK
+#define STM32_PCLK1_FREQUENCY   STM32_HCLK_FREQUENCY
+
+/* APB1 timers (2-7, 12-14) will receive PCLK1. */
+
+#define STM32_APB1_TIM2_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM3_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM4_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM5_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM6_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM7_CLKIN   STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM12_CLKIN  STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM13_CLKIN  STM32_PCLK1_FREQUENCY
+#define STM32_APB1_TIM14_CLKIN  STM32_PCLK1_FREQUENCY
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,15-17 are on APB2, others on APB1 */
+
+#define STM32_TIM18_FREQUENCY   STM32_HCLK_FREQUENCY
+#define STM32_TIM27_FREQUENCY   STM32_HCLK_FREQUENCY
+
+/* LED definitions ******************************************************************/
+
+/* It is assumed that a generic board has 1 LED. Thus only two different states
+ * can be shown. Statuses defined as "1" will light the LED, the ones defined as
+ * "0" will turn the LED off. */
+
+#define LED_STARTED       1
+#define LED_HEAPALLOCATE  1
+#define LED_IRQSENABLED   1
+#define LED_STACKCREATED  1
+#define LED_INIRQ         1
+#define LED_SIGNAL        1
+#define LED_ASSERTION     0
+#define LED_PANIC         0
+
+/* Button definitions ***************************************************************/
+
+/* It is assumed that a generic board has 1 button. */
+
+#define BUTTON_0           0
+
+#define NUM_BUTTONS        1
+
+#define BUTTON_0_BIT       (1 << BUTTON_0)
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+
+/************************************************************************************
+ * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs.  If
+ *   CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
+ *   control the LEDs from user applications.
+ *
+ ************************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+EXTERN void stm32_ledinit(void);
+EXTERN void stm32_setled(int led, bool ledon);
+EXTERN void stm32_setleds(uint8_t ledset);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs
new file mode 100644
index 000000000..751ebccea
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f100rc_generic/nsh/Make.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#           Freddie Chopin <freddie_chopin@op.pl>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS = -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS = -g
+endif
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig
new file mode 100644
index 000000000..b1f0b2d82
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_DEFAULT_SMALL=y
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_LM3S is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_CMNVECTOR=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_BOARD_LOOPSPERMSEC=2398
+# CONFIG_ARCH_CALIBRATION is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+CONFIG_ARCH_CHIP_STM32F100RC=y
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+CONFIG_STM32_STM32F10XX=y
+CONFIG_STM32_VALUELINE=y
+CONFIG_STM32_HIGHDENSITY=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+CONFIG_STM32_BKP=y
+# CONFIG_STM32_CEC is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_IWDG is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_TIM15 is not set
+# CONFIG_STM32_TIM16 is not set
+# CONFIG_STM32_TIM17 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_USART2_REMAP is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_STACKDUMP=y
+
+#
+# Board Settings
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=24576
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F100RC_GENERIC=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f100rc_generic"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# STM32F100RC Generic Hardware Configuration
+#
+
+#
+# RTOS Features
+#
+CONFIG_USEC_PER_TICK=10000
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=11
+CONFIG_START_DAY=1
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORKPRIORITY=192
+CONFIG_SCHED_HPWORKPERIOD=50000
+CONFIG_SCHED_HPWORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=17
+# CONFIG_SCHED_LPWORK is not set
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_ENVIRON is not set
+CONFIG_DISABLE_POLL=y
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_SPI is not set
+CONFIG_RTC=y
+# CONFIG_RTC_DATETIME is not set
+# CONFIG_RTC_HIRES is not set
+# CONFIG_RTC_ALARM is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Named Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_SYSTEM_CDCACM is not set
+# CONFIG_SYSTEM_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_SYSTEM_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WLAN is not set
+
+#
+# Interpreters
+#
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_DNSCLIENT is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh
new file mode 100755
index 000000000..0e3810cbb
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f100rc_generic/nsh/setenv.sh
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#           Freddie Chopin <freddie_chopin@op.pl>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script b/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script
new file mode 100644
index 000000000..f9fde02ac
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script
@@ -0,0 +1,118 @@
+/****************************************************************************
+ * configs/stm32f100rc_generic/scripts/ld.script
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F100RC has 256kB of FLASH beginning at address 0x08000000 and 24kB
+ * of SRAM beginning at address 0x20000000.  When booting from FLASH, FLASH
+ * memory is aliased to address 0x00000000 where the code expects to begin
+ * execution by jumping to the entry point in the 0x08000000 address range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 24K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore b/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore
new file mode 100644
index 000000000..726d936e1
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore
@@ -0,0 +1,2 @@
+/.depend
+/Make.dep
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile b/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile
new file mode 100644
index 000000000..8cd8a2af4
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile
@@ -0,0 +1,82 @@
+############################################################################
+# configs/stm32f100rc_generic/src/Makefile
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#           Freddie Chopin <freddie_chopin@op.pl>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+ASRCS		=
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= up_boot.c up_leds.c up_buttons.c
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h b/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h
new file mode 100644
index 000000000..2d4b282c0
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h
@@ -0,0 +1,57 @@
+/************************************************************************************
+ * configs/stm32f100rc_generic/src/stm32f100rc_internal.h
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H
+#define __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* LED - assume it is on PA0 */
+
+#define GPIO_LED1       (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | GPIO_OUTPUT_CLEAR | GPIO_PORTA | GPIO_PIN0)
+
+/* BUTTON - assume it is on PA1 */
+
+#define MIN_IRQBUTTON   BUTTON_0
+#define MAX_IRQBUTTON   BUTTON_0
+#define NUM_IRQBUTTONS  1
+
+#define GPIO_BTN_0      (GPIO_INPUT | GPIO_CNF_INFLOAT | GPIO_MODE_INPUT | GPIO_PORTA | GPIO_PIN1)
+
+#endif /* __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H */
+
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c
new file mode 100644
index 000000000..ca9f89d68
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c
@@ -0,0 +1,70 @@
+/************************************************************************************
+ * configs/stm32f100rc_generic/src/up_boot.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "stm32f100rc_internal.h"
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void)
+{
+  /* Configure on-board LEDs if LED support has been selected. */
+#ifdef CONFIG_ARCH_LEDS
+  board_led_initialize();
+#endif
+}
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c
new file mode 100644
index 000000000..b05b7a1d5
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c
@@ -0,0 +1,119 @@
+/****************************************************************************
+ * configs/stm32f100rc_generic/src/board_buttons.c
+ *
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "stm32f100rc_internal.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ *   board_button_initialize() must be called to initialize button resources.  After
+ *   that, board_buttons() may be called to collect the current state of all
+ *   buttons or board_button_irq() may be called to register button interrupt
+ *   handlers.
+ *
+ ****************************************************************************/
+
+void board_button_initialize(void)
+{
+  stm32_configgpio(GPIO_BTN_0);    /* Configure the GPIO pins as inputs. */
+}
+
+/****************************************************************************
+ * Name: board_buttons
+ ****************************************************************************/
+
+uint8_t board_buttons(void)
+{
+  uint8_t ret = 0;
+
+  ret = (stm32_gpioread(g_buttons[i]) == false ? 1 : 0);
+
+  return ret;
+}
+
+/************************************************************************************
+ * Button support.
+ *
+ * Description:
+ *   board_button_initialize() must be called to initialize button resources.  After
+ *   that, board_buttons() may be called to collect the current state of all
+ *   buttons or board_button_irq() may be called to register button interrupt
+ *   handlers.
+ *
+ *   After board_button_initialize() has been called, board_buttons() may be called to
+ *   collect the state of all buttons.  board_buttons() returns an 8-bit bit set
+ *   with each bit associated with a button.  See the BUTTON_*_BIT and JOYSTICK_*_BIT
+ *   definitions in board.h for the meaning of each bit.
+ *
+ *   board_button_irq() may be called to register an interrupt handler that will
+ *   be called when a button is depressed or released.  The ID value is a
+ *   button enumeration value that uniquely identifies a button resource. See the
+ *   BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
+ *   value.  The previous interrupt handler address is returned (so that it may
+ *   restored, if so desired).
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+xcpt_t board_button_irq(int id, xcpt_t irqhandler)
+{
+  xcpt_t oldhandler = NULL;
+
+  if (id == 0)
+    oldhandler = stm32_gpiosetevent(GPIO_BTN_0, true, true, true, irqhandler);
+
+  return oldhandler;
+}
+#endif
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c
new file mode 100644
index 000000000..ea453d15a
--- /dev/null
+++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c
@@ -0,0 +1,106 @@
+/****************************************************************************
+ * configs/stm32f100rc_generic/src/up_leds.c
+ *
+ *   Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Freddie Chopin <freddie_chopin@op.pl>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+#include <nuttx/power/pm.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+#include "stm32.h"
+#include "stm32f100rc_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
+ * with CONFIG_DEBUG_VERBOSE too)
+ */
+
+#ifdef CONFIG_DEBUG_LEDS
+#  define leddbg  lldbg
+#  define ledvdbg llvdbg
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_led_initialize
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void board_led_initialize(void)
+{
+   stm32_configgpio(GPIO_LED1);    /* Configure LED1 GPIO for output */
+}
+
+/****************************************************************************
+ * Name: board_led_on
+ ****************************************************************************/
+
+void board_led_on(int led)
+{
+  if (led == 1)
+    stm32_gpiowrite(GPIO_LED1, true);
+}
+
+/****************************************************************************
+ * Name: board_led_off
+ ****************************************************************************/
+
+void board_led_off(int led)
+{
+  if (led == 0)
+    stm32_gpiowrite(GPIO_LED1, false);
+}
+
+#endif /* CONFIG_ARCH_LEDS */