diff options
author | Gregory Nutt <gnutt@nuttx.org> | 2014-03-08 15:50:26 -0600 |
---|---|---|
committer | Gregory Nutt <gnutt@nuttx.org> | 2014-03-08 15:50:26 -0600 |
commit | fc300bda7bf9d68ac5d75fa7b732692eeeae5221 (patch) | |
tree | 295b1a1ffbbfea2990cdee1d05a05ca2577c42c0 /nuttx/configs/eagle100/README.txt | |
parent | 3100722cdd78ff94412a760138e2fd4fdc319548 (diff) | |
download | nuttx-fc300bda7bf9d68ac5d75fa7b732692eeeae5221.tar.gz nuttx-fc300bda7bf9d68ac5d75fa7b732692eeeae5221.tar.bz2 nuttx-fc300bda7bf9d68ac5d75fa7b732692eeeae5221.zip |
functions and definitions renamed from lm_ to tiva_
Diffstat (limited to 'nuttx/configs/eagle100/README.txt')
-rw-r--r-- | nuttx/configs/eagle100/README.txt | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/nuttx/configs/eagle100/README.txt b/nuttx/configs/eagle100/README.txt index 8d8daa33e..05ba18422 100644 --- a/nuttx/configs/eagle100/README.txt +++ b/nuttx/configs/eagle100/README.txt @@ -297,15 +297,15 @@ Eagle100-specific Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint. - CONFIG_LM_DISABLE_GPIOA_IRQS=n - CONFIG_LM_DISABLE_GPIOB_IRQS=n - CONFIG_LM_DISABLE_GPIOC_IRQS=n - CONFIG_LM_DISABLE_GPIOD_IRQS=n - CONFIG_LM_DISABLE_GPIOE_IRQS=n - CONFIG_LM_DISABLE_GPIOF_IRQS=n - CONFIG_LM_DISABLE_GPIOG_IRQS=n - CONFIG_LM_DISABLE_GPIOH_IRQS=y - CONFIG_LM_DISABLE_GPIOJ_IRQS=y + CONFIG_TIVA_DISABLE_GPIOA_IRQS=n + CONFIG_TIVA_DISABLE_GPIOB_IRQS=n + CONFIG_TIVA_DISABLE_GPIOC_IRQS=n + CONFIG_TIVA_DISABLE_GPIOD_IRQS=n + CONFIG_TIVA_DISABLE_GPIOE_IRQS=n + CONFIG_TIVA_DISABLE_GPIOF_IRQS=n + CONFIG_TIVA_DISABLE_GPIOG_IRQS=n + CONFIG_TIVA_DISABLE_GPIOH_IRQS=y + CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y LM3S6918 specific device driver settings @@ -330,18 +330,18 @@ Eagle100-specific Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET) to build the Stellaris Ethernet driver - CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM_BOARDMAC - If the board-specific logic can provide + CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide a MAC address (via tiva_ethernetmac()), then this should be selected. - CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM_MULTICAST - Set to enable multicast frames - CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation + CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding + CONFIG_TIVA_MULTICAST - Set to enable multicast frames + CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection. + CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ |