configs/eagle100/nettest: Converted to use kconfig-frontends tools

5 files changed, 755 insertions, 346 deletions

diff --git a/nuttx/configs/eagle100/README.txt b/nuttx/configs/eagle100/README.txt
index 89ccfcea1..6bc0ff5df 100644
--- a/nuttx/configs/eagle100/README.txt
+++ b/nuttx/configs/eagle100/README.txt
@@ -391,9 +391,33 @@ Where <subdir> is one of the following:
 
   nettest:
     This configuration directory may be used to enable networking using the
-    LM3S6918's Ethernet controller. It uses examples/nettest to excercise the
+    LM3S6918's Ethernet controller. It uses examples/nettest to exercise the
     TCP/IP network.
 
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configurations using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. As a consequence of (1), selection of toolchains differs from
+       the discussion above under GNU Toolchain Options.  You should
+       *not* add the CROSSDEV setting on the make command line.  Rather,
+       you should reconfigure and select the toolchain that you want
+       from the "System Type" menu.
+
+       Eventually, all of the eagle100 configurations will be changed
+       to use the new configuration mechanism and at that time, the
+       above discussion will be corrected for all configurations.
+
+    3. This configuration is set to use Cygwin under Windows and the
+       CodeSourcery toolchain.  That, however, is easily reconfigurable:
+
   httpd:
     This builds the uIP web server example using the examples/uip application
     (for execution from FLASH).
@@ -425,6 +449,9 @@ Where <subdir> is one of the following:
        to use the new configuration mechanism and at that time, the
        above discussion will be corrected for all configurations.
 
+    3. This configuration is set to use Cygwin under Windows and the
+       devkitARM toolchain.  That, however, is easily reconfigurable:
+
   nxflat:
     This builds the NXFLAT example at apps/examples/nxfalt.
 
diff --git a/nuttx/configs/eagle100/nettest/Make.defs b/nuttx/configs/eagle100/nettest/Make.defs
index 4b33930bd..fc2bce3b7 100644
--- a/nuttx/configs/eagle100/nettest/Make.defs
+++ b/nuttx/configs/eagle100/nettest/Make.defs
@@ -35,89 +35,76 @@
 
 include ${TOPDIR}/.config
 include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
 
-# The default value for CROSSDEV can be overridden from the make command line:
-#   make                         -- Will build for the devkitARM toolchain
-#   make CROSSDEV=arm-eabi-      -- Will build for the devkitARM toolchain
-#   make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-#   make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-
-CROSSDEV		= arm-eabi-
-CC			= $(CROSSDEV)gcc
-CXX			= $(CROSSDEV)g++
-CPP			= $(CROSSDEV)gcc -E
-LD			= $(CROSSDEV)ld
-AR			= $(CROSSDEV)ar rcs
-NM			= $(CROSSDEV)nm
-OBJCOPY			= $(CROSSDEV)objcopy
-OBJDUMP			= $(CROSSDEV)objdump
-
-ARCHCCVERSION		= ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
-ARCHCCMAJOR		= ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-
-ifeq ($(CROSSDEV),arm-nuttx-elf-)
-  MKDEP			= $(TOPDIR)/tools/mkdeps.sh
-  ARCHCPUFLAGS		= -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
-  ARCHINCLUDES		= -I. -isystem $(TOPDIR)/include
-  ARCHXXINCLUDES	= -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT		= -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
-  MAXOPTIMIZATION	= -Os
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
-  WINTOOL		= y
-  DIRLINK 		= $(TOPDIR)/tools/copydir.sh
-  DIRUNLINK		= $(TOPDIR)/tools/unlink.sh
-  MKDEP			= $(TOPDIR)/tools/mknulldeps.sh
-  ARCHCPUFLAGS		= -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
-  ARCHINCLUDES		= -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
-  ARCHXXINCLUDES	= -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT		= -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
-  MAXOPTIMIZATION	= -O2
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  ARCHOPTIMIZATION	= -g
+  ARCHOPTIMIZATION = -g
 endif
 
 ifneq ($(CONFIG_DEBUG_NOOPT),y)
-  ARCHOPTIMIZATION	+= $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
 endif
 
-ARCHCFLAGS		= -fno-builtin
-ARCHCXXFLAGS		= -fno-builtin -fno-exceptions
-ARCHWARNINGS		= -Wall -Wstrict-prototypes -Wshadow
-ARCHWARNINGSXX		= -Wall -Wshadow
-ARCHDEFINES		=
-ARCHPICFLAGS		= -fpic -msingle-pic-base -mpic-register=r10
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
 
-CFLAGS			= $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
-			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CPICFLAGS		= $(ARCHPICFLAGS) $(CFLAGS)
-CXXFLAGS		= $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
-			  $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CXXPICFLAGS		= $(ARCHPICFLAGS) $(CXXFLAGS)
-CPPFLAGS		= $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
-AFLAGS			= $(CFLAGS) -D__ASSEMBLY__
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
 
-NXFLATLDFLAGS1		= -r -d -warn-common
-NXFLATLDFLAGS2		= $(NXFLATLDFLAGS1) \
-			  -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld \
-			  -no-check-sections
-LDNXFLATFLAGS		= -e main -s 2048
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
 
-OBJEXT			= .o
-LIBEXT			= .a
-EXEEXT			=
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
 
 ifneq ($(CROSSDEV),arm-nuttx-elf-)
-  LDFLAGS		+= -nostartfiles -nodefaultlibs
+  LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  LDFLAGS		+= -g
+  LDFLAGS += -g
 endif
 
 
-HOSTCC			= gcc
-HOSTINCLUDES		= -I.
-HOSTCFLAGS		= -Wall -Wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS		=
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
 
diff --git a/nuttx/configs/eagle100/nettest/appconfig b/nuttx/configs/eagle100/nettest/appconfig
deleted file mode 100644
index e5ff507b8..000000000
--- a/nuttx/configs/eagle100/nettest/appconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-############################################################################
-# configs/eagle100/nettest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nettest
-
-
-# Networking support
-
-CONFIGURED_APPS += netutils/uiplib
diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig
index 0cfcb7270..3604d4ec2 100644
--- a/nuttx/configs/eagle100/nettest/defconfig
+++ b/nuttx/configs/eagle100/nettest/defconfig
@@ -1,195 +1,310 @@
-############################################################################
-# configs/eagle100/nettest/defconfig
-#
-#   Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="arm"
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+CONFIG_DEBUG=y
+CONFIG_ARCH_HAVE_STACKCHECK=y
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+# CONFIG_DEBUG_VERBOSE is not set
+
+#
+# Subsystem Debug Options
+#
+# CONFIG_DEBUG_MM is not set
+# CONFIG_DEBUG_SCHED is not set
+CONFIG_DEBUG_NET=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_LIB is not set
+# CONFIG_DEBUG_BINFMT is not set
+# CONFIG_DEBUG_GRAPHICS is not set
+# CONFIG_DEBUG_IRQ is not set
+# CONFIG_DEBUG_STACK is not set
+
+#
+# Driver Debug Options
+#
+# CONFIG_DEBUG_LEDS is not set
+# CONFIG_DEBUG_ANALOG is not set
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_AUDIO is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
 CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+CONFIG_ARCH_CHIP_LM=y
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM4 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
 CONFIG_ARCH_CHIP="lm"
-CONFIG_ARCH_CHIP_LM=y
-CONFIG_ARCH_CHIP_LM3S=y
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+# CONFIG_ARCH_HAVE_FPU is not set
+# CONFIG_ARCH_HAVE_MPU is not set
+# CONFIG_DEBUG_HARDFAULT is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+
+#
+# Stellaris Configuration Options
+#
 CONFIG_ARCH_CHIP_LM3S6918=y
-CONFIG_ARCH_BOARD="eagle100"
-CONFIG_ARCH_BOARD_EAGLE100=y
-CONFIG_BOARD_LOOPSPERMSEC=4531
-CONFIG_RAM_SIZE=65536
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_CALIBRATION=n
-
-#
-# Disable support for interrupts on GPIOJ which does not
-# exist on the LM3S6918.  Additional interrupt support can be
-# disabled if desired to reduce memory footprint.
-CONFIG_LM_DISABLE_GPIOA_IRQS=n
-CONFIG_LM_DISABLE_GPIOB_IRQS=n
-CONFIG_LM_DISABLE_GPIOC_IRQS=n
-CONFIG_LM_DISABLE_GPIOD_IRQS=n
-CONFIG_LM_DISABLE_GPIOE_IRQS=n
-CONFIG_LM_DISABLE_GPIOF_IRQS=n
-CONFIG_LM_DISABLE_GPIOG_IRQS=n
-CONFIG_LM_DISABLE_GPIOH_IRQS=n
-CONFIG_LM_DISABLE_GPIOJ_IRQS=y
+# CONFIG_ARCH_CHIP_LM3S9B96 is not set
+# CONFIG_ARCH_CHIP_LM3S6432 is not set
+# CONFIG_ARCH_CHIP_LM3S6965 is not set
+# CONFIG_ARCH_CHIP_LM3S8962 is not set
+# CONFIG_ARCH_CHIP_LM4F120 is not set
+CONFIG_ARCH_CHIP_LM3S=y
+CONFIG_LM_HAVE_SSI1=y
+# CONFIG_LM_REVA2 is not set
 
 #
-# LM3S6918 specific serial device driver settings
+# Stellaris Peripheral Support
 #
 CONFIG_LM_UART0=y
-CONFIG_LM_UART1=n
-CONFIG_UART0_SERIAL_CONSOLE=y
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART0_PARITY=0
-CONFIG_UART1_PARITY=0
-CONFIG_UART0_2STOP=0
-CONFIG_UART1_2STOP=0
+# CONFIG_LM_UART1 is not set
+# CONFIG_LM_UART2 is not set
+# CONFIG_SSI0_DISABLE is not set
+CONFIG_SSI1_DISABLE=y
+CONFIG_LM_ETHERNET=y
+# CONFIG_LM_FLASH is not set
 
 #
-# LM3S6918 specific SSI device driver settings
+# Disable GPIO Interrupts
 #
-CONFIG_SSI0_DISABLE=n
-CONFIG_SSI1_DISABLE=y
-CONFIG_SSI_POLLWAIT=y
-#CONFIG_SSI_TXLIMIT=4
+# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
+# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
+CONFIG_LM_DISABLE_GPIOJ_IRQS=y
 
 #
-# LM3S6918 specific serial device driver settings
+# Stellaris Ethernet Configuration
 #
-CONFIG_LM_ETHERNET=y
-CONFIG_LM_ETHLEDS=n
+# CONFIG_LM_ETHLEDS is not set
 CONFIG_LM_BOARDMAC=y
-CONFIG_LM_ETHHDUPLEX=n
-CONFIG_LM_ETHNOAUTOCRC=n
-CONFIG_LM_ETHNOPAD=n
-CONFIG_LM_MULTICAST=n
-CONFIG_LM_PROMISCUOUS=n
-CONFIG_LM_BADCRC=n
-CONFIG_LM_DUMPPACKET=n
+# CONFIG_LM_ETHHDUPLEX is not set
+# CONFIG_LM_ETHNOAUTOCRC is not set
+# CONFIG_LM_ETHNOPAD is not set
+# CONFIG_LM_MULTICAST is not set
+# CONFIG_LM_PROMISCUOUS is not set
+# CONFIG_LM_TIMESTAMP is not set
+# CONFIG_LM_BADCRC is not set
+# CONFIG_M3S_DUMPPACKET is not set
 
 #
-# General build options
+# Stellaris SSI Configuration
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=n
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=y
+CONFIG_SSI_POLLWAIT=y
+CONFIG_SSI_TXLIMIT=4
+# CONFIG_NET_MULTICAST is not set
 
 #
-# General OS setup
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
 #
-CONFIG_USER_ENTRYPOINT="nettest_main"
-CONFIG_DEBUG=y
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_NET=y
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=4531
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=65536
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_EAGLE100=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="eagle100"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2009
 CONFIG_START_MONTH=5
 CONFIG_START_DAY=20
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nettest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
 CONFIG_DISABLE_PTHREAD=y
-CONFIG_DISABLE_SIGNALS=n
+# CONFIG_DISABLE_SIGNALS is not set
 CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
 
 #
-# Allow for architecture optimized implementations
+# Signal Numbers
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
 
 #
 # Sizes of configurable things (0 disables)
@@ -200,8 +315,6 @@ CONFIG_NPTHREAD_KEYS=0
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=0
-CONFIG_NUNGET_CHARS=0
 CONFIG_PREALLOC_MQ_MSGS=0
 CONFIG_MQ_MAXMSGSIZE=0
 CONFIG_MAX_WDOGPARMS=4
@@ -209,125 +322,449 @@ CONFIG_PREALLOC_WDOGS=8
 CONFIG_PREALLOC_TIMERS=8
 
 #
-# Filesystem configuration
+# Stack and heap information
 #
-CONFIG_FS_FAT=n
-CONFIG_FS_ROMFS=n
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+CONFIG_NETDEVICES=y
 
 #
-# Maintain legacy build behavior (revisit)
+# General Ethernet MAC Driver Options
 #
+# CONFIG_NETDEV_MULTINIC is not set
+# CONFIG_NET_DUMPPACKET is not set
 
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MTD=y
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
 
 #
-# SPI-based MMC/SD driver
+# USART Configuration
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+CONFIG_MCU_SERIAL=y
+# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# TCP/IP and UDP support via uIP
+# UART0 Configuration
 #
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+CONFIG_ARCH_HAVE_NET=y
+# CONFIG_ARCH_HAVE_PHY is not set
 CONFIG_NET=y
-CONFIG_NET_IPv6=n
+# CONFIG_NET_NOINTS is not set
+# CONFIG_NET_MULTIBUFFER is not set
+# CONFIG_NET_PROMISCUOUS is not set
 CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOCKOPTS=y
+# CONFIG_NET_SOLINGER is not set
 CONFIG_NET_BUFSIZE=420
+# CONFIG_NET_TCPURGDATA is not set
+
+#
+# TCP/IP Networking
+#
 CONFIG_NET_TCP=y
 CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_MAX_LISTENPORTS=8
 CONFIG_NET_TCP_READAHEAD=y
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=536
 CONFIG_NET_NTCP_READAHEAD_BUFFERS=8
-CONFIG_NET_TCPBACKLOG=n
-CONFIG_NET_MAX_LISTENPORTS=8
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
+# CONFIG_NET_TCP_WRITE_BUFFERS is not set
+CONFIG_NET_TCP_RECVDELAY=0
+# CONFIG_NET_TCPBACKLOG is not set
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
+# CONFIG_NET_UDP is not set
 CONFIG_NET_ICMP=y
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=n
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
+# CONFIG_NET_ICMP_PING is not set
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
+# CONFIG_NET_STATISTICS is not set
+CONFIG_NET_RECEIVE_WINDOW=536
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
 
 #
-# UIP Network Utilities
+# File Systems
+#
+
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_PROCFS is not set
 
 #
-# Settings for examples/uip
+# System Logging
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
 
 #
-# Settings for examples/nettest
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
 #
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=0
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=0
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+CONFIG_EXAMPLES_NETTEST=y
+# CONFIG_EXAMPLES_NETTEST_SERVER is not set
+# CONFIG_EXAMPLES_NETTEST_PERFORMANCE is not set
+# CONFIG_EXAMPLES_NETTEST_NOMAC is not set
 CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
 CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
 CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
 CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WGET is not set
 
 #
-# Settings for examples/ostest
+# Graphics Support
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+# CONFIG_TIFF is not set
 
 #
-# Settings for apps/nshlib
+# Interpreters
 #
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
-# Architecture-specific NSH options
+# Network Utilities
 #
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
 
 #
-# Stack and heap information
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+# CONFIG_NETUTILS_WEBCLIENT is not set
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/eagle100/nettest/setenv.sh b/nuttx/configs/eagle100/nettest/setenv.sh
index 37cc7735c..5d12d78cf 100755
--- a/nuttx/configs/eagle100/nettest/setenv.sh
+++ b/nuttx/configs/eagle100/nettest/setenv.sh
@@ -50,7 +50,8 @@ fi
 # This is the Cygwin path to the location where I installed the CodeSourcery
 # toolchain under windows.  You will also have to edit this if you install
 # the CodeSourcery toolchain in any other location
-export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.