configs/pic32mx7mmb/nsh converted to use the kconfig-frontends tools

3 files changed, 987 insertions, 872 deletions

diff --git a/nuttx/configs/pic32mx7mmb/README.txt b/nuttx/configs/pic32mx7mmb/README.txt
index a3098313c..7e02b901b 100644
--- a/nuttx/configs/pic32mx7mmb/README.txt
+++ b/nuttx/configs/pic32mx7mmb/README.txt
@@ -610,215 +610,209 @@ selected as follow:
 Where <subdir> is one of the following:
 
   nsh:
-  ====
-    Description.
-    ------------
+
     This is the NuttShell (NSH) using the NSH startup logic at
     apps/examples/nsh.
 
-    Serial Output.
-    --------------
-    The OS test produces all of its test output on the serial console.
-    This configuration has UART1 enabled as a serial console.
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configurations using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
 
-    SD Card Support
-    ---------------
-    SD card support is built into this example by default:
+    2. Serial Output
+
+       The OS test produces all of its test output on the serial console.
+       This configuration has UART1 enabled as a serial console.
+
+    3. SD Card Support
+
+       SD card support is built into this example by default:
   
-       CONFIG_PIC32MX_SPI1=y
-       CONFIG_NSH_ARCHINIT=y
-
-    The SD card can be mounted from the NSH command line as follows:
-
-       nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
-       nsh> ls -l /mnt/sdcard
-       /mnt/sdcard:
-        -rw-rw-rw-      16 ATEST.TXT
-        -rw-rw-rw-   21170 TODO
-        -rw-rw-rw-      22 ANOTHER.TXT
-        -rw-rw-rw-      22 HI2148.TXT
-        -rw-rw-rw-      16 HiFromNotePad.txt
-
-    USB Configurations.
-    ------------------
-    USB device support is enabled by default in this configuration.
-    The following settings are defined by default (and can be set
-    to 'n' to disabled USB device support).
+         CONFIG_PIC32MX_SPI1=y
+         CONFIG_NSH_ARCHINIT=y
+
+       The SD card can be mounted from the NSH command line as follows:
+
+         nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
+         nsh> ls -l /mnt/sdcard
+         /mnt/sdcard:
+          -rw-rw-rw-      16 ATEST.TXT
+          -rw-rw-rw-   21170 TODO
+          -rw-rw-rw-      22 ANOTHER.TXT
+          -rw-rw-rw-      22 HI2148.TXT
+          -rw-rw-rw-      16 HiFromNotePad.txt
+
+    4. USB Configurations
+
+       USB device support is enabled by default in this configuration.
+       The following settings are defined by default (and can be set
+       to 'n' to disabled USB device support).
  
-      CONFIG_USBDEV=y         : Enable basic USB device support
-      CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
-      CONFIG_USBMSC=y         : USB supports a mass storage device.
+         CONFIG_USBDEV=y         : Enable basic USB device support
+         CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
+         CONFIG_USBMSC=y         : USB supports a mass storage device.
 
-    In this configuration, NSH will support the following commands:
+      In this configuration, NSH will support the following commands:
 
-      msconn  : Connect the mass storage device, exportint the SD
-                card as the USB mass storage logical unit.
-      msdis   : Disconnect the USB mass storage device
+         msconn  : Connect the mass storage device, exportint the SD
+                   card as the USB mass storage logical unit.
+         msdis   : Disconnect the USB mass storage device
  
-    NOTE: The SD card should *not* be mounted under NSH *and* exported
-    by the mass storage device!!! That can result in corruption of the
-    SD card format.  This is the sequence of commands that you should
-    use to work with the SD card safely:
-
-      mount -t vfat /dev/mmcsd0 /mnt/sdcard : Mount the SD card initially
-      ...
-      umount /mnt/sdcard   : Unmount the SD card before connecting
-      msconn               : Connect the USB MSC
-      ...
-      msdis                : Disconnect the USB MSC
-      mount -t vfat /dev/mmcsd0 /mnt/sdcard : Re-mount the SD card
-      ...
+       NOTE: The SD card should *not* be mounted under NSH *and* exported
+       by the mass storage device!!! That can result in corruption of the
+       SD card format.  This is the sequence of commands that you should
+       use to work with the SD card safely:
+
+         mount -t vfat /dev/mmcsd0 /mnt/sdcard : Mount the SD card initially
+         ...
+         umount /mnt/sdcard   : Unmount the SD card before connecting
+         msconn               : Connect the USB MSC
+         ...
+         msdis                : Disconnect the USB MSC
+         mount -t vfat /dev/mmcsd0 /mnt/sdcard : Re-mount the SD card
+         ...
       
-    Other USB other device configurations can be enabled and
-    included as NSH built-in built in functions.
+       Other USB other device configurations can be enabled and
+       included as NSH built-in built in functions.
 
-    examples/usbterm - This option can be enabled by uncommenting
-    the following line in the appconfig file:
+       examples/usbterm - This option can be enabled by adding the
+       following to the NuttX configuration file:
 
-      CONFIGURED_APPS += examples/usbterm
+         CONFIG_EXAMPLES_USBTERM=y
 
-    And by enabling one of the USB serial devices:
+       And by enabling one of the USB serial devices:
 
-      CONFIG_USBMSC=n         : Disable USB mass storage device.
-      CONFIG_PL2303=y         : Enable the Prolifics PL2303 emulation
-      CONFIG_CDCACM=y         : or the CDC/ACM serial driver (not both)
+         CONFIG_USBMSC=n         : Disable USB mass storage device.
+         CONFIG_PL2303=y         : Enable the Prolifics PL2303 emulation
+         CONFIG_CDCACM=y         : or the CDC/ACM serial driver (not both)
 
-    system/cdcacm -  The system/cdcacm program can be included as an 
-    function by uncommenting the following line in the appconfig file:
+       system/cdcacm -  The system/cdcacm program can be included as an 
+       function by adding the following to the NuttX configuration file:
     
-      CONFIGURED_APPS += system/cdcacm
-
-    and defining the following in your .config file:
+         CONFIG_SYSTEM_CDCACM=y
 
-      CONFIG_USBMSC=n         : Disable USB mass storage device.
-      CONFIG_CDCACM=y         : Enable the CDCACM device
+       and defining the following in your .config file:
 
-    Networking Configurations.
-    --------------------------
-    Networking is enabled by default in this configuration:
+         CONFIG_USBMSC=n         : Disable USB mass storage device.
+         CONFIG_CDCACM=y         : Enable the CDCACM device
 
-      CONFIG_NET=y              : Enable networking support
-      CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver
-      CONFIG_NSH_TELNET=y       : Enable the Telnet NSH console (optional)
+    5. Networking Configurations
 
-    The default configuration has:
+       Networking is enabled by default in this configuration:
 
-      CONFIG_NSH_DHCPC=n                        : DHCP is disabled
-      CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)   : Target IP address 10.0.0.2
-      CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
+         CONFIG_NET=y              : Enable networking support
+         CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver
+         CONFIG_NSH_TELNET=y       : Enable the Telnet NSH console (optional)
 
-    This will probably need to be customized for your network.
- 
-    NOTES:
-    1. This logic will assume that a network is connected.  During its
-       initialization, it will try to negotiate the link speed.  If you have
-       no network connected when you reset the board, there will be a long
-       delay (maybe 30 seconds?) before anything happens.  That is the timeout
-       before the networking finally gives up and decides that no network is
-       available.
+       The default configuration has:
 
-    2. This example can support an FTP client.  In order to build in FTP client
-       support simply uncomment the following lines in the appconfig file (before
-       configuring) or in the apps/.config file (after configuring):
+         CONFIG_NSH_DHCPC=n                        : DHCP is disabled
+         CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)   : Target IP address 10.0.0.2
+         CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
 
-       #CONFIGURED_APPS += netutils/ftpc
-       #CONFIGURED_APPS += examples/ftpc
+       This will probably need to be customized for your network.
+ 
+       NOTES:
 
-    3. This example can support an FTP server.  In order to build in FTP server
-       support simply uncomment the following lines in the appconfig file (before
-       configuring) or in the apps/.config file (after configuring):
+       a. This logic will assume that a network is connected.  During its
+          initialization, it will try to negotiate the link speed.  If you have
+          no network connected when you reset the board, there will be a long
+          delay (maybe 30 seconds?) before anything happens.  That is the timeout
+          before the networking finally gives up and decides that no network is
+          available.
 
-       #CONFIGURED_APPS += netutils/ftpd
-       #CONFIGURED_APPS += examples/ftpd
+       b. This example can support an FTP client.  In order to build in FTP client
+          support simply add the following to the NuttX configuration file:
 
-       And enable poll() support in the NuttX configuration file:
+         CONFIG_NETUTILS_FTPC=y
+         CONFIG_EXAMPLES_FTPC=y
 
-       CONFIG_DISABLE_POLL=n
+       3. This example can support an FTP server.  In order to build in FTP server
+          support simply add the following to the NuttX configuration file:
 
-  Using a RAM disk and the USB MSC device to the nsh configuration
-  ----------------------------------------------------------------
-  Here is an experimental change to examples/nsh that will create a RAM
-  disk and attempt to export that RAM disk as a USB mass storage device.
+         CONFIG_NETUTILS_FTPD=y
+         CONFIG_SYSTEM_FTPD=y
 
-  1. Changes to nuttx/.config
+          And enable poll() support in the NuttX configuration file:
 
-    a) Enable support for the PIC32 USB device
+          CONFIG_DISABLE_POLL=n
 
-      -CONFIG_PIC32MX_USBDEV=n 
-      +CONFIG_PIC32MX_USBDEV=y
+    6. Using a RAM disk and the USB MSC device to the nsh configuration
 
-    b) Enable NuttX USB device support
+       Here is an experimental change to examples/nsh that will create a RAM
+       disk and attempt to export that RAM disk as a USB mass storage device.
 
-      -CONFIG_USBDEV=n
-      +CONFIG_USBDEV=y
+       1. Changes to nuttx/.config
 
-    c) Enable the USB MSC class driver
+         a) Enable support for the PIC32 USB device
 
-      -CONFIG_USBMSC=n
-      +CONFIG_USBMSC=y
+           -CONFIG_PIC32MX_USBDEV=n 
+           +CONFIG_PIC32MX_USBDEV=y
 
-    d) Use a RAM disk (instead of an SD card) as the USB MSC logical unit:
+         b) Enable NuttX USB device support
 
-      -CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
-      +CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/ram0"
+           -CONFIG_USBDEV=n
+           +CONFIG_USBDEV=y
 
-  2. Changes to nuttx/.config.
+         c) Enable the USB MSC class driver
 
-    a) Enable building of the system/usbmsc:
+           -CONFIG_USBMSC=n
+           +CONFIG_USBMSC=y
 
-      -# CONFIGURED_APPS += system/usbmsc
-      +  CONFIGURED_APPS += system/usbmsc
+         d) Use a RAM disk (instead of an SD card) as the USB MSC logical unit:
 
-  3. When NSH first comes up, you must manually create the RAM disk
-     before exporting it:
+           -CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
+           +CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/ram0"
 
-    a) Create a 64Kb RAM disk at /dev/ram0:
+       2. Changes to nuttx/.config.
 
-      nsh> mkrd -s 512 128
+         a) Enable building of the system/usbmsc:
 
-    b) Put a FAT file system on the RAM disk:
-  
-      nsh> mkfatfs /dev/ram0
+            CONFIG_SYSTEM_USBMSC=y
 
-    b) Now the 'msconn' command will connect to the host and
-       export /dev/ram0 as the USB logical unit:
+       3. When NSH first comes up, you must manually create the RAM disk
+          before exporting it:
 
-      nsh> msconn
+         a) Create a 64Kb RAM disk at /dev/ram0:
 
-    NOTE:  This modification should be considered experimental.  IN the
-    little testing I have done with it, it appears functional.  But the
-    logic has not been stressed and there could still be lurking issues.
-    (There is a bug associated with this configuration listed in the
-    top-level TODO list).
+           nsh> mkrd -s 512 128
 
-  Adding LCD and graphics support to the nsh configuration:
-  --------------------------------------------------------
+         b) Put a FAT file system on the RAM disk:
+  
+           nsh> mkfatfs /dev/ram0
 
-    LCD support is already enabled in defconfig (nuttx/.config):
+         b) Now the 'msconn' command will connect to the host and
+            export /dev/ram0 as the USB logical unit:
 
-      CONFIG_NX=y                          : Enable graphics suppport
-      CONFIG_PIC32MX_PMP=y                 : Enable parallel port support
-      CONFIG_LCD_MIO283QT2=y               : MIO283QT2 LCD support
+           nsh> msconn
 
-    But you will have to enable a specific graphics example application
-    in order to see anything.
- 
-    appconfig (apps/.config):  Enable the application configurations that you
-    want to use.  Asexamples:
+         NOTE:  This modification should be considered experimental.  IN the
+         little testing I have done with it, it appears functional.  But the
+         logic has not been stressed and there could still be lurking issues.
+         (There is a bug associated with this configuration listed in the
+         top-level TODO list).
 
-      CONFIGURED_APPS += examples/nx       : Pick one or more
-      CONFIGURED_APPS += examples/nxhello  :
-      CONFIGURED_APPS += examples/nximage  :
-      CONFIGURED_APPS += examples/nxlines  :
+    7. Adding LCD and graphics support to the nsh configuration
 
-  Enabling touch screen support in the nsh configuaration
-  -------------------------------------------------------
+       LCD support is already enabled in defconfig (nuttx/.config):
 
-    In defconfig (or nuttx/.config), set:
+         CONFIG_NX=y                          : Enable graphics suppport
+         CONFIG_PIC32MX_PMP=y                 : Enable parallel port support
+         CONFIG_LCD_MIO283QT2=y               : MIO283QT2 LCD support
 
-      CONFIG_INPUT=y                       : Enable input device support
-      CONFIG_SCHED_WORKQUEUE=y             : Work queue support needed
+       But you will have to enable a specific graphics example application
+       in the NuttX configuration file in order to see anything.
+ 
+    8. Enabling touch screen support in the nsh configuaration
 
-    In appconfig (or apps/.config), uncomment:
+       In defconfig (or nuttx/.config), set:
 
-      CONFIGURED_APPS += examples/touchscreen
+         CONFIG_INPUT=y                       : Enable input device support
+         CONFIG_SCHED_WORKQUEUE=y             : Work queue support needed
+         CONFIG_EXAMPLES_TOUCHSCREEN=y        : Touchscreen example code
diff --git a/nuttx/configs/pic32mx7mmb/nsh/appconfig b/nuttx/configs/pic32mx7mmb/nsh/appconfig
deleted file mode 100644
index bf55b32f5..000000000
--- a/nuttx/configs/pic32mx7mmb/nsh/appconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-############################################################################
-# configs/pic32mx7mmb/nsh/appconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-############################################################################
-# Path to example in apps/examples containing the user_start entry point
-############################################################################
-
-CONFIGURED_APPS += examples/nsh
-
-############################################################################
-# The NSH application library
-############################################################################
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-############################################################################
-# USB device configurations
-############################################################################
-
-ifeq ($(CONFIG_PIC32MX_USBDEV),y)
-
-# USB Mass Storage Class device configurations
-
-ifeq ($(CONFIG_USBMSC),y)
-  CONFIGURED_APPS += system/usbmsc
-else
-
-# USB CDC/ACM serial device configurations
-
-ifeq ($(CONFIG_CDCACM),y)
-# Comment out to enable the examples/usbterm built-in
-  CONFIGURED_APPS += system/cdcacm
-# Uncomment the following to enable the examples/usbterm built-in
-# CONFIGURED_APPS += examples/usbterm
-else
-
-# Prolifics PL2303 emulation configurations
-
-ifeq ($(CONFIG_PL2303),y)
-# Uncomment the following to enable the examples/usbterm built-in
-# CONFIGURED_APPS += examples/usbterm
-endif # CONFIG_PL2303
-endif # CONFIG_CDCACM
-endif # CONFIG_USBMSC
-endif # CONFIG_PIC32MX_USBDEV
-
-############################################################################
-# Networking configurations
-############################################################################
-
-# Networking libraries.
-# Uncomment netutils/ftpc to include an FTP client library
-# Uncomment netutils/ftpd to include an FTP server library
-
-ifeq ($(CONFIG_NET),y)
-CONFIGURED_APPS += netutils/uiplib
-CONFIGURED_APPS += netutils/resolv
-CONFIGURED_APPS += netutils/webclient
-CONFIGURED_APPS += netutils/tftpc
-#CONFIGURED_APPS += netutils/ftpc
-#CONFIGURED_APPS += netutils/ftpd
-ifeq ($(CONFIG_NSH_TELNET),y)
-CONFIGURED_APPS += netutils/telnetd
-endif
-endif
-
-# Networking applications configured as an NX built-in commands
-# Uncomment examples/ftpc to include the FTP client example
-# Uncomment examples/ftpd to include the FTP daemon example
-
-ifeq ($(CONFIG_NET),y)
-#CONFIGURED_APPS += examples/ftpc
-#CONFIGURED_APPS += examples/ftpd
-endif
-
-############################################################################
-# Other Applications that can be configured as an NX built-in commands
-############################################################################
-
-# The I2C tool
-
-ifeq ($(CONFIG_I2C),y)
-CONFIGURED_APPS += system/i2c
-endif
-
-# Uncomment to select a graphics example
-
-ifeq ($(CONFIG_NX),y)
-#CONFIGURED_APPS += examples/nx
-#CONFIGURED_APPS += examples/nxhello
-#CONFIGURED_APPS += examples/nximage
-#CONFIGURED_APPS += examples/nxlines
-endif
-
-# Uncomment to enable the touchscreen test
-
-ifeq ($(CONFIG_INPUT),y)
-#CONFIGURED_APPS += examples/touchscreen
-endif
diff --git a/nuttx/configs/pic32mx7mmb/nsh/defconfig b/nuttx/configs/pic32mx7mmb/nsh/defconfig
index af9984326..10dd665da 100644
--- a/nuttx/configs/pic32mx7mmb/nsh/defconfig
+++ b/nuttx/configs/pic32mx7mmb/nsh/defconfig
@@ -1,785 +1,1038 @@
-############################################################################
-# configs/pic32mx7mmb/nsh/defconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
 #
-CONFIG_ARCH="mips"
-CONFIG_ARCH_MIPS=y
-CONFIG_ARCH_MIPS32=y
-CONFIG_ARCH_CHIP="pic32mx"
-CONFIG_ARCH_CHIP_PIC32MX795F512L=y
-CONFIG_ARCH_BOARD="pic32mx7mmb"
-CONFIG_ARCH_BOARD_PIC32MX7MMB=y
-CONFIG_BOARD_LOOPSPERMSEC=7245
-CONFIG_RAM_SIZE=131072
-CONFIG_RAM_START=0xa0000000
-CONFIG_ARCH_NOINTC=n
-CONFIG_ARCH_VECNOTIRQ=y
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
 
 #
-# Enable support for RAM-based functions
-# (If selected, then modifications are needed in ld.script as well)
+# Build Configuration
 #
-CONFIG_ARCH_RAMFUNCS=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
 
 #
-# Identify toolchain and linker options
+# Binary Output Formats
 #
-CONFIG_PIC32MX_MICROCHIPW=n
-CONFIG_PIC32MX_MICROCHIPL=n
-CONFIG_PIC32MX_MICROCHIPW_LITE=y
-CONFIG_PIC32MX_MICROCHIPL_LITE=n
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_ARCH_HAVE_STACKCHECK is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+# CONFIG_ARCH_ARM is not set
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+CONFIG_ARCH_MIPS=y
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="mips"
+CONFIG_ARCH_FAMILY="mips32"
+CONFIG_ARCH_CHIP="pic32mx"
+# CONFIG_SERIAL_TERMIOS is not set
+CONFIG_PHY_AUTONEG=y
+CONFIG_NET_NTXDESC=7
+CONFIG_NET_NRXDESC=7
+CONFIG_NET_PRIORITY=28
+# CONFIG_NET_WOL is not set
+# CONFIG_NET_HASH is not set
+# CONFIG_NET_MULTICAST is not set
+CONFIG_ARCH_CHIP_PIC32MX=y
+CONFIG_ARCH_MIPS32=y
 
 #
-# Individual subsystems can be enabled:
+# MIPS32 Configuration Options
 #
+# CONFIG_MIPS32_TOOLCHAIN_GNU_ELF is not set
+# CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW is not set
+CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y
+# CONFIG_MIPS32_TOOLCHAIN_PINGUINOW is not set
+# CONFIG_MIPS32_FRAMEPOINTER is not set
 
-CONFIG_PIC32MX_WDT=n
-CONFIG_PIC32MX_RTCC=n
-CONFIG_PIC32MX_TIMER1=n
-CONFIG_PIC32MX_TIMER2=n
-CONFIG_PIC32MX_TIMER3=n
-CONFIG_PIC32MX_TIMER4=n
-CONFIG_PIC32MX_TIMER5=n
-CONFIG_PIC32MX_IC1=n
-CONFIG_PIC32MX_IC2=n
-CONFIG_PIC32MX_IC3=n
-CONFIG_PIC32MX_IC4=n
-CONFIG_PIC32MX_IC5=n
-CONFIG_PIC32MX_OC1=n
-CONFIG_PIC32MX_OC2=n
-CONFIG_PIC32MX_OC3=n
-CONFIG_PIC32MX_OC4=n
-CONFIG_PIC32MX_OC5=n
-CONFIG_PIC32MX_I2C1=n
-CONFIG_PIC32MX_I2C2=n
+#
+# PIC32MX Configuration Options
+#
+# CONFIG_ARCH_CHIP_PIC32MX110F016B is not set
+# CONFIG_ARCH_CHIP_PIC32MX110F016C is not set
+# CONFIG_ARCH_CHIP_PIC32MX110F016D is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032B is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032C is not set
+# CONFIG_ARCH_CHIP_PIC32MX120F032D is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064B is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064C is not set
+# CONFIG_ARCH_CHIP_PIC32MX130F064D is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128B is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128C is not set
+# CONFIG_ARCH_CHIP_PIC32MX150F128D is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016B is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016C is not set
+# CONFIG_ARCH_CHIP_PIC32MX210F016D is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032B is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032C is not set
+# CONFIG_ARCH_CHIP_PIC32MX220F032D is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064B is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064C is not set
+# CONFIG_ARCH_CHIP_PIC32MX230F064D is not set
+# CONFIG_ARCH_CHIP_PIC32MX250F128B is not set
+# CONFIG_ARCH_CHIP_PIC32MX250F128C is not set
+# CONFIG_ARCH_CHIP_PIC32MX250F128D is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F032H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX320F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX340F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX360F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX360F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX420F032H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX440F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX460F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX460F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX534F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX534F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX564F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX575F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F064H is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F064L is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX664F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX675F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX695F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX695F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX764F128H is not set
+# CONFIG_ARCH_CHIP_PIC32MX764F128L is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F256H is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F256L is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F512H is not set
+# CONFIG_ARCH_CHIP_PIC32MX775F512L is not set
+# CONFIG_ARCH_CHIP_PIC32MX795F512H is not set
+CONFIG_ARCH_CHIP_PIC32MX795F512L=y
+# CONFIG_ARCH_CHIP_PIC32MX1 is not set
+# CONFIG_ARCH_CHIP_PIC32MX2 is not set
+# CONFIG_ARCH_CHIP_PIC32MX3 is not set
+# CONFIG_ARCH_CHIP_PIC32MX4 is not set
+# CONFIG_ARCH_CHIP_PIC32MX5 is not set
+# CONFIG_ARCH_CHIP_PIC32MX6 is not set
+CONFIG_ARCH_CHIP_PIC32MX7=y
+# CONFIG_PIC32MX_MVEC is not set
+CONFIG_PIC32MX_T1=y
+
+#
+# PIC32MX Peripheral Support
+#
+# CONFIG_PIC32MX_WDT is not set
+# CONFIG_PIC32MX_T2 is not set
+# CONFIG_PIC32MX_T3 is not set
+# CONFIG_PIC32MX_T4 is not set
+# CONFIG_PIC32MX_T5 is not set
+# CONFIG_PIC32MX_IC1 is not set
+# CONFIG_PIC32MX_IC2 is not set
+# CONFIG_PIC32MX_IC3 is not set
+# CONFIG_PIC32MX_IC4 is not set
+# CONFIG_PIC32MX_IC5 is not set
+# CONFIG_PIC32MX_OC1 is not set
+# CONFIG_PIC32MX_OC2 is not set
+# CONFIG_PIC32MX_OC3 is not set
+# CONFIG_PIC32MX_OC4 is not set
+# CONFIG_PIC32MX_OC5 is not set
+# CONFIG_PIC32MX_I2C1 is not set
+# CONFIG_PIC32MX_I2C2 is not set
+# CONFIG_PIC32MX_I2C3 is not set
+# CONFIG_PIC32MX_I2C4 is not set
+# CONFIG_PIC32MX_I2C5 is not set
 CONFIG_PIC32MX_SPI1=y
-CONFIG_PIC32MX_SPI2=n
-CONFIG_PIC32MX_SPI3=n
-CONFIG_PIC32MX_SPI4=n
+# CONFIG_PIC32MX_SPI2 is not set
+# CONFIG_PIC32MX_SPI3 is not set
+# CONFIG_PIC32MX_SPI4 is not set
 CONFIG_PIC32MX_UART1=y
-CONFIG_PIC32MX_UART2=n
-CONFIG_PIC32MX_UART3=n
-CONFIG_PIC32MX_UART4=n
-CONFIG_PIC32MX_UART5=n
-CONFIG_PIC32MX_UART6=n
+# CONFIG_PIC32MX_UART2 is not set
+# CONFIG_PIC32MX_UART3 is not set
+# CONFIG_PIC32MX_UART4 is not set
+# CONFIG_PIC32MX_UART5 is not set
+# CONFIG_PIC32MX_UART6 is not set
+# CONFIG_PIC32MX_ADC is not set
 CONFIG_PIC32MX_PMP=y
-CONFIG_PIC32MX_ADC=n
-CONFIG_PIC32MX_CVR=n
-CONFIG_PIC32MX_CM1=n
-CONFIG_PIC32MX_CM2=n
-CONFIG_PIC32MX_DDP=n
-CONFIG_PIC32MX_FLASH=n
-CONFIG_PIC32MX_BMX=n
-CONFIG_PIC32MX_DMA=n
-CONFIG_PIC32MX_CHE=n
+# CONFIG_PIC32MX_CM1 is not set
+# CONFIG_PIC32MX_CM2 is not set
+# CONFIG_PIC32MX_CM3 is not set
+# CONFIG_PIC32MX_RTCC is not set
+# CONFIG_PIC32MX_DMA is not set
+# CONFIG_PIC32MX_FLASH is not set
 CONFIG_PIC32MX_USBDEV=y
-CONFIG_PIC32MX_USBHOST=n
-CONFIG_PIC32MX_CAN1=n
-CONFIG_PIC32MX_CAN2=n
+# CONFIG_PIC32MX_USBHOST is not set
+# CONFIG_PIC32MX_CAN1 is not set
+# CONFIG_PIC32MX_CAN2 is not set
 CONFIG_PIC32MX_ETHERNET=y
+# CONFIG_PIC32MX_CTMU is not set
+
+#
+# PIC32MX Peripheral Interrupt Priorities
+#
+CONFIG_PIC32MX_CTPRIO=16
+CONFIG_PIC32MX_CS0PRIO=16
+CONFIG_PIC32MX_CS1PRIO=16
+CONFIG_PIC32MX_INT0PRIO=16
+CONFIG_PIC32MX_INT1PRIO=16
+CONFIG_PIC32MX_INT2PRIO=16
+CONFIG_PIC32MX_INT3PRIO=16
+CONFIG_PIC32MX_INT4PRIO=16
+CONFIG_PIC32MX_T1PRIO=16
+CONFIG_PIC32MX_SPI1PRIO=16
+CONFIG_PIC32MX_UART1PRIO=16
+CONFIG_PIC32MX_PMPPRIO=16
+CONFIG_PIC32MX_USBPRIO=16
 
 #
-# PIC32MX Configuration Settings
+# PIC32MX PHY/Ethernet device driver settings
+#
+
+#
+# Device Configuration 0 (DEVCFG0)
 #
 CONFIG_PIC32MX_DEBUGGER=2
 CONFIG_PIC32MX_ICESEL=1
-CONFIG_PIC32MX_FETHIO=0
-CONFIG_PIC32MX_FMIIEN=0
+CONFIG_PIC32MX_PROGFLASHWP=0xff
+CONFIG_PIC32MX_BOOTFLASHWP=1
+CONFIG_PIC32MX_CODEWP=1
 
 #
-# PIC32MX specific serial device driver settings
+# Device Configuration 1 (DEVCFG1)
 #
-CONFIG_UART1_SERIAL_CONSOLE=y
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-CONFIG_UART6_SERIAL_CONSOLE=n
 
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-CONFIG_UART6_TXBUFSIZE=256
-
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-CONFIG_UART6_RXBUFSIZE=256
+#
+# Device Configuration 3 (DEVCFG3)
+#
+CONFIG_PIC32MX_USBIDO=0
+CONFIG_PIC32MX_VBUSIO=0
+# CONFIG_PIC32MX_WDENABLE is not set
+CONFIG_PIC32MX_FETHIO=0
+CONFIG_PIC32MX_FMIIEN=0
 
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-CONFIG_UART6_BAUD=115200
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+CONFIG_ARCH_VECNOTIRQ=y
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_HAVE_RAMFUNCS=y
+# CONFIG_ARCH_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
 
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-CONFIG_UART6_BITS=8
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=7245
+# CONFIG_ARCH_CALIBRATION is not set
 
-CONFIG_UART1_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
-CONFIG_UART6_PARITY=0
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
 
-CONFIG_UART1_2STOP=0
-CONFIG_UART2_2STOP=0
-CONFIG_UART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
-CONFIG_UART6_2STOP=0
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
 
 #
-# PIC32MX specific PHY/Ethernet device driver settings
+# Boot Memory Configuration
 #
-CONFIG_NETDEVICES=y
-CONFIG_ETH0_PHY_KS8721=n
-CONFIG_ETH0_PHY_DP83848C=n
-CONFIG_ETH0_PHY_LAN8720=y
-CONFIG_PHY_AUTONEG=y
-CONFIG_PHY_SPEED100=n
-CONFIG_PHY_FDUPLEX=y
-CONFIG_NET_NTXDESC=7
-CONFIG_NET_NRXDESC=7
-CONFIG_NET_REGDEBUG=n
-CONFIG_NET_DESCDEBUG=n
-CONFIG_NET_DUMPPACKET=n
+CONFIG_RAM_START=0xa0000000
+CONFIG_RAM_SIZE=131072
+# CONFIG_ARCH_HAVE_SDRAM is not set
 
 #
-# PIC32MX-specific USB device setup
+# Board Selection
 #
-CONFIG_PIC32MX_USBDEV_REGDEBUG=n
-CONFIG_PIC32MX_USBDEV_BDTDEBUG=n
+# CONFIG_ARCH_BOARD_PIC32_STARTERKIT is not set
+CONFIG_ARCH_BOARD_PIC32MX7MMB=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="pic32mx7mmb"
 
 #
-# General build options
+# Common Board Options
 #
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDSPIPORTNO=1
 
 #
-# General OS setup
+# Board-Specific Options
 #
-CONFIG_USER_ENTRYPOINT="nsh_main"
 
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_SCHED=n
-CONFIG_DEBUG_USB=n
-CONFIG_DEBUG_NET=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_INPUT=n
-CONFIG_DEBUG_FS=n
-CONFIG_DEBUG_SPI=n
-CONFIG_SPI_REGDEBUG=n
-
-CONFIG_HAVE_CXX=n
-CONFIG_HAVE_CXXINITIALIZE=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2012
 CONFIG_START_MONTH=6
 CONFIG_START_DAY=1
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=2048
-CONFIG_SIG_SIGWORK=17
 CONFIG_SCHED_WAITPID=y
-CONFIG_SCHED_ATEXIT=n
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
 
 #
-# System Logging
+# Signal Numbers
 #
-
-CONFIG_SYSLOG=n
-CONFIG_RAMLOG=n
-CONFIG_RAMLOG_CONSOLE=n
-CONFIG_RAMLOG_SYSLOG=n
-#CONFIG_RAMLOG_NPOLLWAITERS
-#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
-# Settings for NXFLAT
+# Sizes of configurable things (0 disables)
 #
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=4
 
 #
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
+# Stack and heap information
 #
-# There are certain dependency relationships in these
-# features.
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
 #
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
+# Device Drivers
 #
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=n
-CONFIG_DISABLE_ENVIRON=n
 CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_HAVECARDDETECT is not set
+CONFIG_MMCSD_SPI=y
+CONFIG_MMCSD_SPICLOCK=12500000
+CONFIG_MMCSD_SPIMODE=0
+# CONFIG_ARCH_HAVE_SDIO is not set
+CONFIG_MTD=y
 
 #
-# Misc libc settings
+# MTD Configuration
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
+# CONFIG_MTD_PARTITION is not set
+# CONFIG_MTD_BYTE_WRITE is not set
+# CONFIG_MTD_CONFIG is not set
+# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
 
 #
-# Allow for architecture optimized implementations
+# MTD Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_RAMMTD is not set
+# CONFIG_MTD_AT24XX is not set
+# CONFIG_MTD_AT25 is not set
+# CONFIG_MTD_AT45DB is not set
+# CONFIG_MTD_M25P is not set
+# CONFIG_MTD_SMART is not set
+# CONFIG_MTD_RAMTRON is not set
+# CONFIG_MTD_SST25 is not set
+# CONFIG_MTD_SST25XX is not set
+# CONFIG_MTD_SST39FV is not set
+# CONFIG_MTD_W25 is not set
+CONFIG_NETDEVICES=y
+
 #
-# The architecture can provide optimized versions of the
-# following to improve system performance
+# General Ethernet MAC Driver Options
 #
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+# CONFIG_NETDEV_MULTINIC is not set
 
 #
-# Sizes of configurable things (0 disables)
+# External Ethernet MAC Device Support
 #
-CONFIG_MAX_TASKS=16
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=8
-CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_STDIO_LINEBUFFER=y
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=8
-CONFIG_PREALLOC_TIMERS=4
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
 
 #
-# Framebuffer driver options
+# External Ethernet PHY Device Support
 #
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
+# CONFIG_ETH0_PHY_NONE is not set
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+# CONFIG_ETH0_PHY_DP83848C is not set
+CONFIG_ETH0_PHY_LAN8720=y
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART1=y
 
 #
-# Framebuffer driver options
+# USART Configuration
 #
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_UART1_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
 
 #
-# Filesystem configuration
+# UART1 Configuration
 #
-CONFIG_FS_FAT=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART1_BAUD=115200
+CONFIG_UART1_BITS=8
+CONFIG_UART1_PARITY=0
+CONFIG_UART1_2STOP=0
+# CONFIG_UART1_IFLOWCONTROL is not set
+# CONFIG_UART1_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_USBDEV=y
 
 #
-# Maintain legacy build behavior (revisit)
+# USB Device Controller Driver Options
 #
-
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MTD=y
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
+CONFIG_USBDEV_MAXPOWER=100
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_USBDEV_TRACE is not set
 
 #
-# SPI-based MMC/SD driver
+# USB Device Class Driver Options
 #
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+# CONFIG_CDCACM is not set
+CONFIG_USBMSC=y
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=1
+CONFIG_USBMSC_EPBULKIN=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_NRDREQS=8
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=64
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
 
 #
-# Block driver buffering
+# System Logging Device Options
 #
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
 
 #
-# SDIO-based MMC/SD driver
+# System Logging
 #
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
+# CONFIG_RAMLOG is not set
 
 #
-# TCP/IP and UDP support via uIP
+# Networking Support
 #
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
 CONFIG_NET=y
-CONFIG_NET_NOINTS=n
+# CONFIG_NET_NOINTS is not set
 CONFIG_NET_MULTIBUFFER=y
-CONFIG_NET_IPv6=n
+# CONFIG_NET_PROMISCUOUS is not set
 CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOCKOPTS=y
+# CONFIG_NET_SOLINGER is not set
 CONFIG_NET_BUFSIZE=562
+# CONFIG_NET_TCPURGDATA is not set
+
+#
+# TCP/IP Networking
+#
 CONFIG_NET_TCP=y
 CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
 CONFIG_NET_TCP_READAHEAD=y
-#CONFIG_NET_TCP_READAHEAD_BUFSIZE
+CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
 CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+# CONFIG_NET_TCP_WRITE_BUFFERS is not set
+CONFIG_NET_TCP_RECVDELAY=0
 CONFIG_NET_TCPBACKLOG=y
-CONFIG_NET_MAX_LISTENPORTS=40
+# CONFIG_NET_TCP_SPLIT is not set
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
 CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_BROADCAST=y
+# CONFIG_NET_RXAVAIL is not set
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_PING=y
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=n
-#CONFIG_NET_RECEIVE_WINDOW=
-CONFIG_NET_BROADCAST=n
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_ARP_IPIN=n
-CONFIG_NET_MULTICAST=n
+# CONFIG_NET_PINGADDRCONF is not set
+# CONFIG_NET_IGMP is not set
+# CONFIG_NET_STATISTICS is not set
+CONFIG_NET_RECEIVE_WINDOW=536
+CONFIG_NET_ARPTAB_SIZE=16
+# CONFIG_NET_ARP_IPIN is not set
+# CONFIG_NET_ROUTE is not set
 
 #
-# UIP Network Utilities
+# File Systems
 #
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
 
 #
-# FTP Server
+# File system configuration
 #
-CONFIG_FTPD_CMDBUFFERSIZE=512
-CONFIG_FTPD_DATABUFFERSIZE=2048
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
 
 #
-# Input device configuration
+# System Logging
 #
-CONFIG_INPUT=n
-CONFIG_INPUT_TSC2007=n
-CONFIG_INPUT_STMPE811=n
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
 
 #
-# USB Device Configuration
+# Graphics Support
 #
-CONFIG_USBDEV=y
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB serial device class driver (Standard CDC ACM class)
-#
-CONFIG_CDCACM=n
-CONFIG_CDCACM_CONSOLE=n
-#CONFIG_CDCACM_EP0MAXPACKET
-#CONFIG_CDCACM_EPINTIN
-#CONFIG_CDCACM_EPINTIN_FSSIZE
-#CONFIG_CDCACM_EPINTIN_HSSIZE
-#CONFIG_CDCACM_EPBULKOUT
-#CONFIG_CDCACM_EPBULKOUT_FSSIZE
-#CONFIG_CDCACM_EPBULKOUT_HSSIZE
-#CONFIG_CDCACM_EPBULKIN
-#CONFIG_CDCACM_EPBULKIN_FSSIZE
-#CONFIG_CDCACM_EPBULKIN_HSSIZE
-#CONFIG_CDCACM_NWRREQS
-#CONFIG_CDCACM_NRDREQS
-#CONFIG_CDCACM_VENDORID
-#CONFIG_CDCACM_VENDORSTR
-#CONFIG_CDCACM_PRODUCTID
-#CONFIG_CDCACM_PRODUCTSTR
-#CONFIG_CDCACM_RXBUFSIZE
-#CONFIG_CDCACM_TXBUFSIZE
-
-#
-# USB Storage Device Configuration
+# CONFIG_NX is not set
+
 #
-CONFIG_USBMSC=y
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=1
-CONFIG_USBMSC_EPBULKIN=2
-CONFIG_USBMSC_NRDREQS=8
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=64
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
 
 #
-# Graphics related configuration settings
+# Non-standard Library Support
 #
-CONFIG_NX=y
-CONFIG_NX_MULTIUSER=n
-CONFIG_NX_NPLANES=1
-CONFIG_NX_DISABLE_1BPP=y
-CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=y
-CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
-CONFIG_NX_DISABLE_24BPP=y
-CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=255
-CONFIG_LCD_MAXCONTRAST=1
-CONFIG_NX_MOUSE=y
-CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=0x5cb7
-CONFIG_NXTK_BORDERCOLOR2=0x21c9
-CONFIG_NXTK_BORDERCOLOR3=0xffdf
-CONFIG_NXTK_AUTORAISE=n
-CONFIG_NXFONT_SANS17X22=n
-CONFIG_NXFONT_SANS20X26=n
-CONFIG_NXFONT_SANS22X29=n
-CONFIG_NXFONT_SANS23X27=y
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS17X23B=n
-CONFIG_NXFONT_SANS20X27B=n
-CONFIG_NXFONT_SANS22X29B=y
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=n
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
 
 #
-# NxConsole Configuration Settings:
+# Basic CXX Support
 #
-CONFIG_NXCONSOLE=n
-CONFIG_NXCONSOLE_BPP=16
-CONFIG_NXCONSOLE_MXCHARS=256
-CONFIG_NXCONSOLE_CACHESIZE=32
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
 #
 
 #
-# PIC32MX7 MMB LCD Hardware Configuration
+# Built-In Applications
 #
-CONFIG_LCD_MIO283QT2=y
-CONFIG_LCD_NOGETRUN=n
-CONFIG_LCD_LANDSCAPE=n
-CONFIG_LCD_RLANDSCAPE=n
-CONFIG_LCD_PORTRAIT=y
-CONFIG_LCD_RPORTRAIT=n
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 
 #
-# PIC32MX7 MMB specific LCD settings
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
 #
+# Graphics Support
+#
+# CONFIG_TIFF is not set
 
 #
-# Settings for examples/uip
+# Interpreters
 #
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
-# Settings for examples/nettest
+# Network Utilities
 #
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=y
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
 
 #
-# Settings for examples/ostest
+# Networking Utilities
 #
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_RESOLV=y
+CONFIG_NET_RESOLV_ENTRIES=4
+CONFIG_NET_RESOLV_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_UIPLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
 
 #
-# Settings for apps/nshlib
+# FreeModBus
 #
-CONFIG_BUILTIN=y
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
 CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_TMPDIR="/tmp"
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
 CONFIG_NSH_CONSOLE=y
-#CONFIG_NSH_CONDEV="/dev/ttyS1"
-CONFIG_NSH_TELNET=n
+# CONFIG_NSH_USBCONSOLE is not set
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
 CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
 CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
+# CONFIG_NSH_TELNET_LOGIN is not set
 CONFIG_NSH_IPADDR=0x0a000002
 CONFIG_NSH_DRIPADDR=0x0a000001
 CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
+# CONFIG_NSH_DNS is not set
+# CONFIG_NSH_NOMAC is not set
+CONFIG_NSH_MAX_ROUNDTRIP=20
 
 #
-# Architecture-specific NSH options
+# NxWidgets/NxWM
 #
-CONFIG_NSH_MMCSDSPIPORTNO=1
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
 
 #
-# I2C tool settings
+# Platform-specific Support
 #
-CONFIG_I2CTOOL_MINBUS=1
-CONFIG_I2CTOOL_MAXBUS=4
-#CONFIG_I2CTOOL_MINADDR
-#CONFIG_I2CTOOL_MAXADDR
-#CONFIG_I2CTOOL_MAXREGADDR
-CONFIG_I2CTOOL_DEFFREQ=100000
+# CONFIG_PLATFORM_CONFIGDATA is not set
 
 #
-# Settings for examples/ftpd
+# System Libraries and NSH Add-Ons
 #
 
 #
-# Settings for examples/nx
+# USB CDC/ACM Device Commands
 #
-CONFIG_EXAMPLES_NX_VPLANE=0
-CONFIG_EXAMPLES_NX_DEVNO=0
-CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NX_COLOR1=0xaedc
-CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
-CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
-CONFIG_EXAMPLES_NX_FONTID=0
-CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
-CONFIG_EXAMPLES_NX_BPP=16
-CONFIG_EXAMPLES_NX_RAWWINDOWS=n
-CONFIG_EXAMPLES_NX_STACKSIZE=2048
-CONFIG_EXAMPLES_NX_CLIENTPRIO=80
-CONFIG_EXAMPLES_NX_SERVERPRIO=120
-CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
-CONFIG_EXAMPLES_NX_EXTERNINIT=n
 
 #
-# Settings for examples/nxhello
+# USB Composite Device Commands
 #
-CONFIG_EXAMPLES_NXHELLO_VPLANE=0
-CONFIG_EXAMPLES_NXHELLO_DEVNO=0
-CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NXHELLO_FONTID=6
-CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf
-CONFIG_EXAMPLES_NXHELLO_BPP=16
-CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
 
 #
-# Settings for examples/nximage
+# Custom Free Memory Command
 #
-CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
-CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
-CONFIG_EXAMPLES_NXIMAGE_BPP=16
-CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
+# CONFIG_SYSTEM_FREE is not set
 
 #
-# Settings for examples/nxlines
+# I2C tool
 #
-CONFIG_EXAMPLES_NXLINES_VPLANE=0
-CONFIG_EXAMPLES_NXLINES_DEVNO=0
-CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
-CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
-CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
-CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
-CONFIG_EXAMPLES_NXLINES_BPP=16
-CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
 
 #
-# Settings for examples/touchscreen
+# INI File Parser
 #
-CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
-CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
-CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
+# CONFIG_SYSTEM_INIFILE is not set
 
 #
-# Settings for examples/usbserial
+# FLASH Program Installation
 #
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+# CONFIG_SYSTEM_INSTALL is not set
 
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+#
+# FLASH Erase-all Command
+#
+# CONFIG_SYSTEM_FLASH_ERASEALL is not set
 
 #
-# Settings for system/usbmsc
+# NxPlayer media player library / command Line
 #
-CONFIG_SYSTEM_USBMSC_NLUNS=1
-CONFIG_SYSTEM_USBMSC_DEVMINOR1=0
-CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
-CONFIG_SYSTEM_USBMSC_TRACEINIT=n
-CONFIG_SYSTEM_USBMSC_TRACECLASS=n
-CONFIG_SYSTEM_USBMSC_TRACETRANSFERS=n
-CONFIG_SYSTEM_USBMSC_TRACECONTROLLER=n
-CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS=n
+# CONFIG_SYSTEM_NXPLAYER is not set
 
 #
-# Settings for examples/usbterm
+# RAM test
 #
-CONFIG_EXAMPLES_USBTERM_DEVINIT=y
-#CONFIG_EXAMPLES_USBTERM_BUFLEN
-CONFIG_EXAMPLES_USBTERM_TRACEINIT=n
-CONFIG_EXAMPLES_USBTERM_TRACECLASS=n
-CONFIG_EXAMPLES_USBTERM_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS=n
+# CONFIG_SYSTEM_RAMTEST is not set
 
 #
-# Settings for system/cdcacm
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
 #
-# Configuration prequisites:
+# Power Off
 #
-CONFIG_SYSTEM_CDCACM_DEVMINOR=0
-CONFIG_SYSTEM_CDCACM_TRACEINIT=n
-CONFIG_SYSTEM_CDCACM_TRACECLASS=n
-CONFIG_SYSTEM_CDCACM_TRACETRANSFERS=n
-CONFIG_SYSTEM_CDCACM_TRACECONTROLLER=n
-CONFIG_SYSTEM_CDCACM_TRACEINTERRUPTS=n
+# CONFIG_SYSTEM_POWEROFF is not set
 
 #
-# Stack and heap information
+# RAMTRON
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=2048
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+CONFIG_SYSTEM_USBMSC=y
+CONFIG_SYSTEM_USBMSC_NLUNS=1
+CONFIG_SYSTEM_USBMSC_DEVMINOR1=0
+CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
+CONFIG_SYSTEM_USBMSC_DEVMINOR2=1
+CONFIG_SYSTEM_USBMSC_DEVPATH2="/dev/mmcsd1"
+CONFIG_SYSTEM_USBMSC_DEVMINOR3=2
+CONFIG_SYSTEM_USBMSC_DEVPATH3="/dev/mmcsd2"
+# CONFIG_SYSTEM_USBMSC_DEBUGMM is not set
+CONFIG_SYSTEM_USBMSC_CMD_STACKSIZE=768
+CONFIG_SYSTEM_USBMSC_CMD_PRIORITY=100
+CONFIG_SYSTEM_USBMSC_DAEMON_STACKSIZE=2048
+CONFIG_SYSTEM_USBMSC_DAEMON_PRIORITY=100
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set