Add configs/stm32f4discovery/usbnsh

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5572 42af7a65-404d-4744-a932-0658087f49c3

12 files changed, 1029 insertions, 20 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 32112f358..76ed2b603 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -4045,4 +4045,7 @@
 	  is started. This can be used to schedule C++ constructors to run
 	  automatically in the context of the new task.
 	* binfmt/binfmt_execmodule: Execute constructors as a start hook.
+	* sched/os_start.c: Fix ordering of group initialization.
+	* configs/stm32f4discovery/usbnsh:  Add an NSH STM32F4Discovery
+	  configuration that uses USB CDC/ACM for the NSH console.
 
diff --git a/nuttx/configs/stm32f4discovery/README.txt b/nuttx/configs/stm32f4discovery/README.txt
index 39fb41d78..0e295c429 100644
--- a/nuttx/configs/stm32f4discovery/README.txt
+++ b/nuttx/configs/stm32f4discovery/README.txt
@@ -1473,6 +1473,56 @@ Where <subdir> is one of the following:
     3. By default, this project assumes that you are *NOT* using the DFU
        bootloader.
  
+  usbnsh:
+  -------
+
+    This is another NSH example.  If differs from other 'nsh' configurations
+    in that this configurations uses a USB serial device for console I/O.
+    Such a configuration is useful on the stm32f4discovery which has no
+    builtin RS-232 drivers.
+
+    NOTES:
+ 
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration uses the CodeSourcery toolchain
+       for Windows and builds under Cygwin (or probably MSYS).  That
+       can easily be reconfigured, of course.
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
+
+    3. This configuration does have UART2 output enabled and set up as
+       the system logging device:
+
+       CONFIG_SYSLOG=y                    : Enable output to syslog, not console
+       CONFIG_SYSLOG_CHAR=y               : Use a character device for system logging
+       CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART2 will be /dev/ttyS0
+
+       Debug, however, is not enable so in the default configuration nothing
+       should appear on UART2 unless you enable some debug output.
+
+    4. By default, this project assumes that you are *NOT* using the DFU
+       bootloader.
+
+    Using the Prolifics PL2303 Emulation
+    ------------------------------------
+    You could also use the non-standard PL2303 serial device instead of
+    the standard CDC/ACM serial device by changing:
+
+      CONFIG_CDCACM=y               : Disable the CDC/ACM serial device class
+      CONFIG_CDCACM_CONSOLE=y       : The CDC/ACM serial device is NOT the console
+      CONFIG_PL2303=y               : The Prolifics PL2303 emulation is enabled
+      CONFIG_PL2303_CONSOLE=y       : The PL2303 serial device is the console
+
   winbuild:
   --------
 
diff --git a/nuttx/configs/stm32f4discovery/usbnsh/Make.defs b/nuttx/configs/stm32f4discovery/usbnsh/Make.defs
new file mode 100644
index 000000000..0bea20b8a
--- /dev/null
+++ b/nuttx/configs/stm32f4discovery/usbnsh/Make.defs
@@ -0,0 +1,111 @@
+############################################################################
+# configs/stm32f4discovery/usbnsh/Make.defs
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/stm32f4discovery/usbnsh/defconfig b/nuttx/configs/stm32f4discovery/usbnsh/defconfig
new file mode 100644
index 000000000..3ddcab424
--- /dev/null
+++ b/nuttx/configs/stm32f4discovery/usbnsh/defconfig
@@ -0,0 +1,738 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_IWDG is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_SPI=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+
+#
+# Board Settings
+#
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=114688
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+# CONFIG_ARCH_IRQBUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=27
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WORKQUEUE is not set
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+CONFIG_NO_SERIAL_CONSOLE=y
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=256
+CONFIG_USART2_TXBUFSIZE=256
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+CONFIG_USBDEV=y
+
+#
+# Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_USBDEV_TRACE is not set
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=y
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=2
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=0
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=0
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_RXBUFSIZE=256
+# CONFIG_CDCACM_TXBUFSIZE is not set
+CONFIG_CDCACM_VENDORID=0x0525
+CONFIG_CDCACM_PRODUCTID=0xa4a7
+CONFIG_CDCACM_VENDORSTR="NuttX"
+CONFIG_CDCACM_PRODUCTSTR="USBdev Serial"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_BINFS is not set
+
+#
+# System Logging
+#
+CONFIG_SYSLOG=y
+CONFIG_SYSLOG_CHAR=y
+CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Helper Functions
+#
+# CONFIG_LIB_KBDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Interpreters
+#
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+# CONFIG_NSH_CONDEV is not set
+CONFIG_NSH_ARCHINIT=y
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh b/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh
new file mode 100755
index 000000000..a56f85d35
--- /dev/null
+++ b/nuttx/configs/stm32f4discovery/usbnsh/setenv.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# configs/stm32f4discovery/usbnsh/setenv.sh
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/drivers/usbdev/Kconfig b/nuttx/drivers/usbdev/Kconfig
index 70c7a04f0..6fa4124be 100644
--- a/nuttx/drivers/usbdev/Kconfig
+++ b/nuttx/drivers/usbdev/Kconfig
@@ -154,6 +154,14 @@ menuconfig PL2303
 		This logic emulates the Prolific PL2303 serial/USB converter
 
 if PL2303
+
+config PL2303_CONSOLE
+	bool "PL2303 console device"
+	default n
+	---help---
+		Register the USB device as /dev/console so that is will be used
+		as the console device.
+
 config PL2303_EPINTIN
 	int "Logical endpoint numbers"
 	default 1
@@ -218,8 +226,16 @@ menuconfig CDCACM
 		Enables USB Modem (CDC ACM) support
 
 if CDCACM
+
+config CDCACM_CONSOLE
+	bool "CDC/ACM console device"
+	default n
+	---help---
+		Register the USB device as /dev/console so that is will be used
+		as the console device.
+
 config CDCACM_COMPOSITE
-	bool "CDCACM composite support"
+	bool "CDC/ACM composite support"
 	default n
 	depends on USBDEV_COMPOSITE
 	---help---
diff --git a/nuttx/fs/Kconfig b/nuttx/fs/Kconfig
index ab03a2b64..e6647f516 100644
--- a/nuttx/fs/Kconfig
+++ b/nuttx/fs/Kconfig
@@ -24,23 +24,26 @@ config SYSLOG
 	---help---
 		Enables generic system logging features.
 
-config SYSLOG_DEVPATH
-	string "System log device"
-	default "/dev/syslog"
-	depends on SYSLOG
-	---help---
-		The full path to the system logging device.  For the RAMLOG SYSLOG device,
-		this is normally "/dev/ramlog".  For character SYSLOG devices, it should be
-		some other existing character device (or file) supported by the configuration
-		(such as "/dev/ttyS1")/
+if SYSLOG
 
 config SYSLOG_CHAR
 	bool "System log character device support"
 	default y
-	depends on SYSLOG
 	---help---
 		Enable the generic character device for the SYSLOG. The full path to the
 		SYSLOG device is provided by SYSLOG_DEVPATH. A valid character device (or
 		file) must exist at this path.  It will by opened by syslog_initialize.
 
 		Do not enable more than one SYSLOG device.
+
+config SYSLOG_DEVPATH
+	string "System log device"
+	default "/dev/syslog"
+	depends on SYSLOG_CHAR
+	---help---
+		The full path to the system logging device.  For the RAMLOG SYSLOG device,
+		this is normally "/dev/ramlog".  For character SYSLOG devices, it should be
+		some other existing character device (or file) supported by the configuration
+		(such as "/dev/ttyS1")/
+
+endif
diff --git a/nuttx/fs/fs_syslog.c b/nuttx/fs/fs_syslog.c
index 1d569082a..f348bdb03 100644
--- a/nuttx/fs/fs_syslog.c
+++ b/nuttx/fs/fs_syslog.c
@@ -265,7 +265,7 @@ int syslog_initialize(void)
     {
       /* The inode was not found.  In this case, we will attempt to re-open
        * the device repeatedly.  The assumption is that the device path is
-       * value but that the driver has not yet been registered.
+       * valid but that the driver has not yet been registered.
        */
 
       g_sysdev.sl_state = SYSLOG_REOPEN;
diff --git a/nuttx/libc/stdio/lib_lowprintf.c b/nuttx/libc/stdio/lib_lowprintf.c
index f7d4ffe2f..667fad7be 100644
--- a/nuttx/libc/stdio/lib_lowprintf.c
+++ b/nuttx/libc/stdio/lib_lowprintf.c
@@ -38,8 +38,10 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
+
 #include <stdio.h>
 #include <debug.h>
+
 #include "lib_internal.h"
 
 /* This interface can only be used from within the kernel */
diff --git a/nuttx/libc/stdio/lib_rawprintf.c b/nuttx/libc/stdio/lib_rawprintf.c
index 98bbbea05..d8deba12d 100644
--- a/nuttx/libc/stdio/lib_rawprintf.c
+++ b/nuttx/libc/stdio/lib_rawprintf.c
@@ -37,8 +37,11 @@
  * Included Files
  ****************************************************************************/
 
+#include <nuttx/config.h>
+
 #include <stdio.h>
 #include <debug.h>
+
 #include "lib_internal.h"
 
 /****************************************************************************
diff --git a/nuttx/sched/os_start.c b/nuttx/sched/os_start.c
index 5e6eaa858..c60edc495 100644
--- a/nuttx/sched/os_start.c
+++ b/nuttx/sched/os_start.c
@@ -327,6 +327,12 @@ void os_start(void)
     }
 #endif
 
+  /* Allocate the IDLE group and suppress child status. */
+
+#ifdef HAVE_TASK_GROUP
+  (void)group_allocate(&g_idletcb);
+#endif
+
   /* Initialize the interrupt handling subsystem (if included) */
 
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
@@ -439,20 +445,21 @@ void os_start(void)
       lib_initialize();
     }
 
-  /* Create the IDLE group and suppress child status */
-
-#ifdef HAVE_TASK_GROUP
-  (void)group_allocate(&g_idletcb);
-  (void)group_initialize(&g_idletcb);
-  g_idletcb.group->tg_flags = GROUP_FLAG_NOCLDWAIT;
-#endif
-
   /* Create stdout, stderr, stdin on the IDLE task.  These will be
    * inherited by all of the threads created by the IDLE task.
    */
 
   (void)group_setupidlefiles(&g_idletcb);
 
+  /* Complete initialization of the IDLE group.  Suppress retention
+   * of child status in the IDLE group.
+   */
+
+#ifdef HAVE_TASK_GROUP
+  (void)group_initialize(&g_idletcb);
+  g_idletcb.group->tg_flags = GROUP_FLAG_NOCLDWAIT;
+#endif
+
   /* Create initial tasks and bring-up the system */
 
   (void)os_bringup();
diff --git a/nuttx/sched/task_vfork.c b/nuttx/sched/task_vfork.c
index 5b42a1e55..ac86ddc56 100644
--- a/nuttx/sched/task_vfork.c
+++ b/nuttx/sched/task_vfork.c
@@ -39,6 +39,7 @@
 
 #include <nuttx/config.h>
 
+#include <sys/wait.h>
 #include <stdint.h>
 #include <assert.h>
 #include <queue.h>