diff options
| -rwxr-xr-x | apps/ChangeLog.txt | 4 | ||||
| -rw-r--r-- | nuttx/ChangeLog | 23 | ||||
| -rw-r--r-- | nuttx/Documentation/NuttX.html | 318 | ||||
| -rw-r--r-- | nuttx/ReleaseNotes | 31 |
4 files changed, 162 insertions, 214 deletions
diff --git a/apps/ChangeLog.txt b/apps/ChangeLog.txt index 3e031c4e3..1641eaa25 100755 --- a/apps/ChangeLog.txt +++ b/apps/ChangeLog.txt @@ -48,7 +48,7 @@ for further information about RGMP. NOTE: This is an empty example on initial check-in. -6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> +6.4 2011-06-06 Gregory Nutt <spudmonkey@racsa.co.cr> * nshlib/nsh_netcmds.c: If a network device name and IP address are provided with the ifconfig command, then this command will now set the network address. @@ -57,4 +57,4 @@ * examples/ftpc: A simple add-on to the NSH. From NSH, you can start this simple FTP shell to transfer files to/from a remote FTP server. - +6.5 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index f0d87e379..fbb8d1b4a 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -212,7 +212,7 @@ * Provide support for multiple network devices * Implement socket ioctl() calls to set addresses * Added listen() and accept() - * Added DM90x0 ethernet driver + * Added DM90x0 Ethernet driver * ARP timer is now built into the network layer * Basic client functionality verified: TCP socket(), bind(), connect(), recv(), send(). @@ -275,7 +275,7 @@ * Added inet_ntoa() and ether_ntoa() * Added netdev_foreach() to support traversal of registered network devices * Added support for 'ifconfig' command to NSH (examples/nsh) - * Moved MAC and ethernet definitions to net/ethernet.h + * Moved MAC and Ethernet definitions to net/ethernet.h * Fix sim and DM90x0 compilation errors introduced in 0.3.4 * Fixed errors in C5471 configuration files for examples/uip * Modified DHCPC (netutils/dhcpc) so that it should work in environments where @@ -848,7 +848,7 @@ * lib/lib_strstr.c: Length of substring off by one causes false alarm sub-string matches. * arch/arm/src/lm3s/lm3s_ethernet.c: Fix errors in LMS6918 FIFO length - handling. (1) The incorrect size of the ethernet header was being + handling. (1) The incorrect size of the Ethernet header was being subtracted on outgoing messages (4 vs 14), which caused outgoing messages to be a little too long. (2) The size of incoming FIFO messages is 6 bytes larger than it expected (2 for the length and 4 for the FCS). The unhandled @@ -1010,7 +1010,7 @@ The released pascal-2.0 will be the first version that contains the compatible changes. * arch/arm/src/lm3s/lm3s_ethernet.c: Fixed an important bug in the LM3S - ethernet driver: If full packet is received, the packet-too-big check + Ethernet driver: If full packet is received, the packet-too-big check will fail because it needs to subtract 6 from the packet size (to account for the 2-byte packet length and the 4-byte packet FCS in the FIFO). @@ -1098,7 +1098,7 @@ 5.5 2010-05-09 Gregory Nutt <spudmonkey@racsa.co.cr> - * drivers/net/enc28j60.c: Microchip ENC28J60 SPI ethernet chip driver. + * drivers/net/enc28j60.c: Microchip ENC28J60 SPI Ethernet chip driver. (untested on original check-in). * configs/olimex-str7p11/nettest: examples/nettest configuration using the ENC28J60 driver on the Olimex STMicro STR-P711. @@ -1334,7 +1334,7 @@ 5.14 2010-11-27 Gregory Nutt <spudmonkey@racsa.co.cr> * configs/olimex-lpc1766stk/nettest: Add examples/nettest configuration to - verify the LPC17xx ethernet driver currently under development. + verify the LPC17xx Ethernet driver currently under development. * arch/arm/src/lpc17xx/lpc17xx_ethernet.c/.h: Began development of the LPC17xx Ethernet driver. Driver in CVS functional after 2010-11-23. * sched/timer_settime.c: Fix an error in set-up of a one-shot POSIX timer. It @@ -1760,7 +1760,7 @@ flushed. This (slightly) increases the NuttX footprint but supports the kind of behavior that people expect for printf. -6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> +6.4 2011-06-06 Gregory Nutt <spudmonkey@racsa.co.cr> * lib/drivers/cc1101: Add initial, functional CC1101 wireless driver (contributed by Uros Platise) @@ -1768,7 +1768,7 @@ code complete and ready to begin testing. Unfortunately, it looks like testing will be delayed due to tool issues (My PICkit 2 will not work the the MPLAB debugger on PIC32; I will need to get a PICkit 3). - * drivers/net/e1000.c/h: A PCI-based E1000 ethernet driver submitted + * drivers/net/e1000.c/h: A PCI-based E1000 Ethernet driver submitted by Yu Qiang. * lib/net/lib_inetaddr.c: An implementation of the inet_addr() function submitted by Yu Qiang. @@ -1802,5 +1802,10 @@ already disconnected and the buffered data is stranded. Now, recvfrom will continue to return success after the socket is disconnected until the readahead buffer is drained. + * olimex-lp1766stk/ftpc/defconfig: Many configurations have the MTU + (CONFIG_NET_BUFSIZE) set to very small numbers, less then the minimum + MTU size that must be supported -- 576. This can cause problems in + some networks: CONFIG_NET_BUFSIZE should be set to at least 576 in + all defconfig files. This has only been fixed in this defconfig file. - +6.5 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 456fc81e9..4759d67ca 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -8,7 +8,7 @@ <tr align="center" bgcolor="#e4e4e4"> <td> <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1> - <p>Last Updated: June 1, 2011</p> + <p>Last Updated: June 6, 2011</p> </td> </tr> </table> @@ -503,7 +503,7 @@ <td><br></td> <td> <p> - <li>Networking utilities (DHCP, SMTP, TELNET, TFTP, HTTP)</li> + <li>Networking utilities (DHCP server and client, SMTP client, TELNET client, FTP client, TFTP client, HTTP server and client)</li> </p> </tr> <tr> @@ -829,63 +829,58 @@ </tr> </table> -<p><b>nuttx-6.3 Release Notes</b>: +<p><b>nuttx-6.4 Release Notes</b>: <p> - The 70<sup>th</sup> release of NuttX, Version 6.3, was made on May 15, 2011 and is available for download from the + The 71<sup>st</sup> release of NuttX, Version 6.4, was made on June 6, 2011 and is available for download from the <a href="http://sourceforge.net/projects/nuttx/files/">SourceForge</a> website. The change log associated with the release is available <a href="#currentrelease">here</a>. Unreleased changes after this release are available in SVN. These unreleased changes are also listed <a href="#pendingchanges">here</a>. </p> <p> - The release of NuttX-6.3 follows only a nines days after the release of version 6.2. - This special back-to-back release was made so that the current released version of - NuttX will correspond to the initial release from the RGMP project. -</p> -<p> - This release adds architecture support and build configuration for RGMP. - RGMP is a project for running GPOS and RTOS simultaneously on multi-processor platforms. - See the <a href="http://rgmp.sourceforge.net/wiki/index.php/Main_Page">RGMP Wiki</a> for further information about RGMP. -</p> -<p> - This release also includes support for STM32 FLASH, build improvements, and initial, incomplete support for the MicroChip PIC32MX MCU. - Bug fixes are included for some build problems, USB host class driver error handling, NX graphics color mapping, and problems with C standard I/O buffer flushing. - See the ChangeLog for further details. -</p> -<p> - Release notes for version 6.2 are retained because they are still relevant. -</p> -<p><b>nuttx-6.2 Release Notes</b>: -<p> - The 6.2 NuttX release includes several new features: + The 6.4 release includes several new features: </p> <ul> - <li> - NXFFS: The obvious new feature is NXFFS, the NuttX wear-leveling FLASH file system. - This new file system is intended to be small for the MCU usage and has some limitations. - No formal documentation of NXFFS yet exists. - See the <a href="http://nuttx.svn.sourceforge.net/viewvc/nuttx/trunk/nuttx/fs/nxffs/README.txt?view=log"><code>fs/nxffs/README.txt</code></a> - file for more details. + <li><i>FTP Client</i>. + A new, full-featured FTP client is included in this release. + This client may be used as a library for automated FTP or via an FTP client shell. + The FTP shell supports the following commands: <code>cd</code>, <code>chmod</code>, <code>get</code>, <code>help</code>, <code>idle</code>, <code>login</code>, <code>ls</code>, <code>quit</code>, <code>mkdir</code>, <code>noop</code>, <code>put</code> <code>pwd</code>, <code>rename</code>, <code>rhelp</code>, <code>rm</code>, <code>rmdir</code>, <code>size</code>, <code>time</code>, and <code>up</code>. + A configuration is available for the NXP LPC17xx to demonstrate this functionality. + </li> + <li><i>C1101 Wireless Driver</i>. + A functional C1101 wireless driver (contributed by Uros Platise) + </li> + <li><i>E1000 Ethernet Driver</i>. + A PCI-based E1000 Ethernet driver (contributed by Yu Qiang) + </li> + <li><i>C-Library Functions</i>. + New C library functions: <code>inet_addr()</code> (contributed by Yu Qiang), <code>strndup()</code>, and <code>asprintf()</code>. </li> - <li> - Support for NXP LPCXpresso LPC1768 board on the Embedded Artists base board. - The Code Red toolchain is supported under either Linux or Windows. - Verifed configurations include DHCPD, the NuttShell (NSH), NuttX graphis (NX), the NuttX OS test, THTTPD, and USB mass storage device. + <li><i>Smaller Memory Allocation Overhead</i>. + Reduced memory allocation overhead for MCUs with small heaps (<64Kb). </li> - <li> - Support for the Univision UG-9664HSWAG01 OLED with Solomon Systech SD1305 LCD controller. + <li><i>C Buffered I/O Integrated with Networking.</i> + <code>fdopen()</code> now works with socket descriptors allowing standard bufferedC functions to be used for network communications. </li> - <li> - A new RAM MTD driver with FLASH simulation capability. + <li><i><code>iconfig</code> Extensions</i>. + The NSH <code>ifconfig</code> command can now be used to set or change the IP address (contributed by Yu Qiang) + </li> +</ul> +<p> + This release also includes some completed but untest functionality. +</p> + +<ul> + <li><i>MicroChip PIC32MX Support</i>. + The MicroChip PIC32MX port is now code complete and ready to begin testing. + Unfortunately, testing will be delayed due to tool issues. </li> - <li> - A <code>version.h</code> file is now automatically generated so that C code can now be version-aware. + <li><i>NXP LPC315x Support</i>. + Support for the NXP LPC315x MCUs. </li> </ul> <p> - In addition to these new feature, several important bugfixes are included in this release correcting problems with - <code>dup2()</code>, LPC17xx GPIO interrupts, LPC17xx UART2/3, the FAT file system, build issues, and <code>strrch()</code>. - See the ChangeLog for more details. + Additional miscellaneous enhancements and bug fixes to <code>task_delete()</code>, <code>recvfrom()</code>, and other changes as noted in the ChangeLog. </p> <table width ="100%"> @@ -1121,6 +1116,26 @@ </td> </tr> <tr> + <td><br></td> + <td><hr></td> +</tr> +<tr> + <td><br></td> + <td> + <b>NXP LPC315x</b>. + Support for the NXP LPC315x family has been incorporated into the code base as of NuttX-6.4. + </p> + <ul> + <p> + <b>STATUS:</b> + The MCU support logic is present but as of this writing has not been verified on hardware. + Because of the high degree of compatibility between the LPC313x and LPC315x family, it + is very likely that the support is in place (or at least very close). + </p> + </ul> + </td> +</tr> +<tr> <td valign="top"><img height="20" width="20" src="favicon.ico"></td> <td bgcolor="#5eaee1"> <b>ARM Cortex-M3</b>. @@ -2144,123 +2159,62 @@ Other memory: </table> <ul><pre> -nuttx-6.2 2011-05-06 Gregory Nutt <spudmonkey@racsa.co.cr> - - * arch/arm/src/lpc17xx/lpc17_gpioint.c: Correct errors in logic that maps - and IRQ number into a register bit number. - * Makefile: Fix an error introduced in the top-level Makefile in NuttX-6.1. - This error only shows up if you have a /tftpboot directory. Then the - make will fail with an obscure error about not being able to stat pass2. - * configs/lpcxpresso-lpc1768/nsh: Add an NSH configuration for the - LPCXpresso board. - * configs/*/ld.script: Removed 'sh_link not set for section .ARM.edix' for - a few of the builds. In you have this warning, it can be removed with the - following change to the ld.script file: - - + __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - - __exidx_end = ABSOLUTE(.); - } >sram - + __exidx_end = ABSOLUTE(.); - - * arch/arm/src/lpc17xx: Correct some typos/bugs in configuration of LPC17xx - UART2 and UART3. - * nuttx/clock.h: Replace all references to the global variable g_system_timer - with clock_systemtimer() (currently just a macro that that returns g_system_timer). - * lib/string/strrch.c: Would fail if the searched-for character were the first - character in the string. - * tools/version.sh and mkversion.c: Tools to manage a NuttX version number - file - * sched/clock_getutc() and lib/time/lib_time.c: Add support for 1 second UTC - interface. - * net/net_dup2.c and include/nuttx/net.h: The conditional compilation for - '#if CONFIG_NFILE_DESCRIPTOR > 0' was wrong in both of these files. It should - be '#if CONFIG_NFILE_DESCRIPTORS > 0'. This causes a dup2() failure in THTTPD - and a failure to get a CGI page. The consequence can be a very serious bug! - * configs/lpcxpresso-lpc1768/usbstorage, thttpd, and dhcpd: Add an USB storage, - THTTPD web server, and DHCP server configurations for the NXP LPCXpresso board. - * drivers/lcd/ug-9664hswag01.c and ssd1305.h: Add support for Univision UG-9664HSWAG01 - OLED with Solomon Systech SD1305 LCD controller. - * configs/lpcxpresso-lpc1668/nx: Add a NX graphics configuration for the LPCXPRESO - board. - * graphics/nxglib/nxglib_nonintersecting.c: Fix some single bit errors in - calculation of non-intersecting regions. This was causing an anomaly - in examples/nx in column 0. - * drivers/mtd/rammtd.c: Added a RAM based MTD driver. This RAM driver simulates - FLASH and is useful for testing purposes. - * arch/arm/src/arm/up_head.S: Fix backward conditional compilation. This cause - the configs/mx1ads configuration to fail to build but does not appear to affect - any other ARM9 build. - * fs/nxffs: Adding a tiny, wear-leveling FLASH file system for NuttX. This - file system is intended to be small and will have some limitations. The - implementation is incomplete on initial checkin. - * apps/examples/nxffs and configs/sim/nxffs: Add a test a a configuration that - will be used to verify NXFFS. - * fs/fat/fs_fat32.c and fs_fat32util.c: Incorpated two bugs with fixed provided - by Sheref Younan. Thanks! - * fs/nxffs: After a couple of weeks of testing and bug fixes, NXFSS appears - stable and functional. - -nuttx-6.3 2011-05-15 Gregory Nutt <spudmonkey@racsa.co.cr> - - * Remove clock_getutc(). It is replaces with clock_gettime(CLOCK_ACTIVETIME). - Add other RTC related changes provided by Uros Platise. - * arch/arm/src/stm32/stm32_flash.c: Add support for access to on-chip STM32 - FLASH; beginning of integration with NXFFS (Uros Platise). - * arch/mips: Added directory structure for PIC32 support - * configs/pcblogic-pic32mx: Add directory structure for PCB Logic PIC32MX board - * apps/include: Move include/apps to apps/include. A symbolic link is created at - build time - * Makefile: Removed support for Pascal pcode interpreter. Support for that - interpreter has been moved to apps/interpreter/Makefile. - * tools/mkdep.sh: Should not report an error if there are no files on the command - line. This happens normally in certain configurations. - * drivers/usbhost: Sheref Younan reported an error in the error handling when - connection to a USB device fails. In certain fail cases, the logic would try - to free the device class instance twice, the first was okay, but the second - caused a crash. - * graphics/nxbe/nxbe_colormap.c: Fix error noted by Bassem Fahmy. The function - nxbe_colormap was change to nxbe_configure... apparently "search-and-replace" - error. This error was not noticed before because most NX platforms do not use - colormapping. - * arch/rgmp and configs/rgmp. Add architecture support and build - configuration for RGMP. RGMP is a project for running GPOS and - RTOS simultaneously on multi-processor platforms. See - http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further - information about RGMP. - * lib/stdio/lib_fclose.c: Must flush all buffered data when the file is closed. - Instead, it was discarding the buffered data. - * lib/stdio: All output stream logic was modified to support CONFIG_STDIO_LINEBUFFER. - If standard C buffered I/O is enabled (CONFIG_STDIO_BUFFER_SIZE > 0), then this - option may be added to force automatic, line-oriented flushing the output buffer - for putc(), fputc(), putchar(), puts(), fputs(), printf(), fprintf(), and vfprintf(). - When a newline is encountered in the output string, the output buffer will be - flushed. This (slightly) increases the NuttX footprint but supports the kind of - behavior that people expect for printf. - -apps-6.2 2011-05-06 Gregory Nutt <spudmonkey@racsa.co.cr> - - * apps/examples/nxffs: Add a test a a configuration that will be used to - verify NXFFS. - -apps-6.3 2011-05-15 Gregory Nutt <spudmonkey@racsa.co.cr> - - * apps/interpreter: Add a directory to hold interpreters. The Pascal add- - on module now installs and builds under this directory. - * apps/interpreter/ficl: Added logic to build Ficl (the "Forth Inspired - Command Language"). See http://ficl.sourceforge.net/. - * apps/netutils/dhcpc, dhcpcd, and tftp. If these directories are included - in the configuration but CONFIG_NET_UDP is disable (which is not very wise), - then a make error occurs because tools/mkdep.sh is called with no files. - * system/free: Move Uros' custom free command from vsn/free - * system/install: Add a new install command submitted by Uros Platise. - * examples/rgmp. Add a placeholder for an RGMP build example. - RGMP is a project for running GPOS and RTOS simultaneously on - multi-processor platforms. See http://rgmp.sourceforge.net/wiki/index.php/Main_Page - for further information about RGMP. NOTE: This is an empty example - on initial check-in. +nuttx-6.4 2011-06-06 Gregory Nutt <spudmonkey@racsa.co.cr> + + * lib/drivers/cc1101: Add initial, functional CC1101 wireless driver + (contributed by Uros Platise) + * arch/mips and configs/pcblogic-pic32mx: The MicroChip PIC32MX port is now + code complete and ready to begin testing. Unfortunately, it looks like + testing will be delayed due to tool issues (My PICkit 2 will not work the + the MPLAB debugger on PIC32; I will need to get a PICkit 3). + * drivers/net/e1000.c/h: A PCI-based E1000 ethernet driver submitted + by Yu Qiang. + * lib/net/lib_inetaddr.c: An implementation of the inet_addr() function + submitted by Yu Qiang. + * arch/arm/src/lpc31xx and arch/arm/include/lpc31xx: Renamed from lpc313x + to make name space for other famiy members. + * arch/arm/*/lpc31xx: Added support for the LPC315x family (untested). + * sched/task_exithook.c: Functionality performed when a task exits or is + deleted has been moved to a common file task_exithook.c. Now exit() + functionality (like flushing I/O and calling registered atexit() + functions, etc.) will be performed when a task is deleted as well. + * mm/: Added support for CONFIG_MM_SMALL. Each memory allocation has a + small allocation overhead. The size of that overhead is normally + determined by the "width" of the address support by the MCU. MCUs + that support 16-bit addressability have smaller overhead than devices + that support 32-bit addressability. However, there are many MCUs + that support 32-bit addressability *but* have internal SRAM of size + less than or equal to 64Kb. In this case, CONFIG_MM_SMALL can be + defined so that those MCUs will also benefit from the smaller, 16- + bit-based allocation overhead. + * lib/string/lib_strndup.c: Add standard strndup() library function. + * net/getsockname.c: Added standard getsockname() to return the local + address associated with a socket. + * lib/stdio/lib_asprintf.c: Add asprintf() + * configs/olimex-lpc1766stk/ftpc: Add a configuration to support + testing of the FTP client shell. + * fd/fs_fdopen.c and net/net_checksd.c: Add support so that fdopen may + be used with socket descriptors. + * net/recvfrom.c: Fix an error found in receiving small files via FTP: + The small file is received a buffered in the readahead buffer, then the + socket is disconnected. When the app calls recvfrom, the socket is + already disconnected and the buffered data is stranded. Now, recvfrom + will continue to return success after the socket is disconnected until + the readahead buffer is drained. + * olimex-lp1766stk/ftpc/defconfig: Many configurations have the MTU + (CONFIG_NET_BUFSIZE) set to very small numbers, less then the minimum + MTU size that must be supported -- 576. This can cause problems in + some networks: CONFIG_NET_BUFSIZE should be set to at least 576 in + all defconfig files. This has only been fixed in this defconfig file. + +apps-6.4 2011-06-06 Gregory Nutt <spudmonkey@racsa.co.cr> + + * nshlib/nsh_netcmds.c: If a network device name and IP address are provided + with the ifconfig command, then this command will now set the network address. + (Contributed by Yu Qiang). + * netutils/ftpc: A library to support client-side FTP. + * examples/ftpc: A simple add-on to the NSH. From NSH, you can start + this simple FTP shell to transfer files to/from a remote FTP server. pascal-1.0 2011-05-15 Gregory Nutt <spudmonkey@racsa.co.cr> @@ -2303,49 +2257,9 @@ buildroot-1.10 2011-05-06 <spudmonkey@racsa.co.cr> </table> <ul><pre> -nuttx-6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> +nuttx-6.5 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> - * lib/drivers/cc1101: Add initial, functional CC1101 wireless driver - (contributed by Uros Platise) - * arch/mips and configs/pcblogic-pic32mx: The MicroChip PIC32MX port is now - code complete and ready to begin testing. Unfortunately, it looks like - testing will be delayed due to tool issues (My PICkit 2 will not work the - the MPLAB debugger on PIC32; I will need to get a PICkit 3). - * drivers/net/e1000.c/h: A PCI-based E1000 ethernet driver submitted - by Yu Qiang. - * lib/net/lib_inetaddr.c: An implementation of the inet_addr() function - submitted by Yu Qiang. - * arch/arm/src/lpc31xx and arch/arm/include/lpc31xx: Renamed from lpc313x - to make name space for other famiy members. - * arch/arm/*/lpc31xx: Added support for the LPC315x family (untested). - * sched/task_exithook.c: Functionality performed when a task exits or is - deleted has been moved to a common file task_exithook.c. Now exit() - functionality (like flushing I/O and calling registered atexit() - functions, etc.) will be performed when a task is deleted as well. - * mm/: Added support for CONFIG_MM_SMALL. Each memory allocation has a - small allocation overhead. The size of that overhead is normally - determined by the "width" of the address support by the MCU. MCUs - that support 16-bit addressability have smaller overhead than devices - that support 32-bit addressability. However, there are many MCUs - that support 32-bit addressability *but* have internal SRAM of size - less than or equal to 64Kb. In this case, CONFIG_MM_SMALL can be - defined so that those MCUs will also benefit from the smaller, 16- - bit-based allocation overhead. - * lib/string/lib_strndup.c: Add standard strndup() library function. - * net/getsockname.c: Added standard getsockname() to return the local - address associated with a socket. - * lib/stdio/lib_asprintf.c: Add asprintf() - * configs/olimex-lpc1766stk/ftpc: Add a configuration to support - testing of the FTP client shell. - -apps-6.4 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> - - * nshlib/nsh_netcmds.c: If a network device name and IP address are provided - with the ifconfig command, then this command will now set the network address. - (Contributed by Yu Qiang). - * netutils/ftpc: A library to support client-side FTP. - * examples/ftpc: A simple add-on to the NSH. From NSH, you can start - this simple FTP shell to transfer files to/from a remote FTP server. +apps-6.5 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> pascal-3.1 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> diff --git a/nuttx/ReleaseNotes b/nuttx/ReleaseNotes index 5631ef194..bde78a9c5 100644 --- a/nuttx/ReleaseNotes +++ b/nuttx/ReleaseNotes @@ -216,7 +216,7 @@ nuttx-0.3.0 This is the 12th release of NuttX. This release includes the initial integration of a network subsystem and the uIP TCP/IP stack into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page). Also included -is a device driver for the Davicom DM90x0 ethernet controller. +is a device driver for the Davicom DM90x0 Ethernet controller. This integration is very preliminary. Only a small portion of the network functionality has been integrated and there are a number of @@ -1872,4 +1872,33 @@ are included for some build problems, USB host class driver error handling, NX graphics color mapping, and problems with C standard I/O buffer flushing. See the ChangeLog for further details. +nuttx-6.4 +^^^^^^^^^ + +The 71st release of NuttX, Version 6.4, was made on June 6, 2011 and is +available for download from the SourceForge website. The 6.4 release +includes several new features: + * A new, full-featured FTP client. This client may be used as a library + for automated FTP or via an FTP client shell. The FTP shell supports + the following commands: cd, chmod, get, help, idle, login, ls, quit, + mkdir, noop, put, pwd, rename, rhelp, rm, rmdir, size, time, and up. + A configuration is available for the NXP LPC17xx to demonstrate this + functionality. + * A functional C1101 wireless driver (contributed by Uros Platise) + * A PCI-based E1000 Ethernet driver (contributed by Yu Qiang) + * New C library functions: inet_addr() (contributed by Yu Qiang), + strndup(), asprintf() + * Reduced memory allocation overhead for MCUs with small heaps (<64Kb). + * fdopen() now works with socket descriptors allowing standard buffered + C functions to be used for network communications. + * The NSH ifconfig command can now be used to set or change the IP + address (contributed by Yu Qiang) + +This release also includes some completed but untest functionality. + + * The MicroChip PIC32MX port is now code complete and ready to begin + testing. Unfortunately, testing will be delayed due to tool issues. + * Support for the NXP LPC315x MCUs. + +Additional miscellaneous enhancements and bug fixes to task_delete(), recvfrom(), and other changes as noted in the ChangeLog. |