diff options
115 files changed, 419 insertions, 226 deletions
diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html index 00368df0e..3c122166b 100644 --- a/nuttx/Documentation/NuttxPortingGuide.html +++ b/nuttx/Documentation/NuttxPortingGuide.html @@ -3041,8 +3041,8 @@ build handle and enables the API mm_addregion(start, end); </li> <li> - <code>CONFIG_TICKS_PER_MSEC</code>: The default system timer is 100Hz - or <code>TICKS_PER_MSEC</code>=10. This setting may be defined to inform NuttX + <code>CONFIG_MSEC_PER_TICK</code>: The default system timer is 100Hz + or <code>MSEC_PER_TICK</code>=10. This setting may be defined to inform NuttX that the processor hardware is providing system timer interrupts at some interrupt interval other than 10 msec. </li> diff --git a/nuttx/arch/avr/src/at32uc3/at32uc3_timerisr.c b/nuttx/arch/avr/src/at32uc3/at32uc3_timerisr.c index aa341c3af..3d1713909 100644 --- a/nuttx/arch/avr/src/at32uc3/at32uc3_timerisr.c +++ b/nuttx/arch/avr/src/at32uc3/at32uc3_timerisr.c @@ -61,8 +61,8 @@ * setting that defaults to 100 (100 ticks per second = 10 MS interval). * * However, the AVR RTC does not support that default value well and so, we - * will insist that default is over-ridden by CONFIG_TICKS_PER_MSEC in the - * configuration file. Further, we will insist that CONFIG_TICKS_PER_MSEC + * will insist that default is over-ridden by CONFIG_MSEC_PER_TICK in the + * configuration file. Further, we will insist that CONFIG_MSEC_PER_TICK * have the value 8 (see reasoning below). */ diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index aadd2140d..d937cc41b 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -261,8 +261,8 @@ defconfig -- This is a configuration file similar to the Linux regions of memory to allocate from, this specifies the number of memory regions that the memory manager must handle and enables the API mm_addregion(start, end); - CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz - or TICKS_PER_MSEC=10. This setting may be defined to + CONFIG_MSEC_PER_TICK - The default system timer is 100Hz + or MSEC_PER_TICK=10. This setting may be defined to inform NuttX that the processor hardware is providing system timer interrupts at some interrupt interval other than 10 msec. diff --git a/nuttx/configs/avr32dev1/nsh/defconfig b/nuttx/configs/avr32dev1/nsh/defconfig index 20793d48b..df7e285e3 100755 --- a/nuttx/configs/avr32dev1/nsh/defconfig +++ b/nuttx/configs/avr32dev1/nsh/defconfig @@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/avr32dev1/ostest/defconfig b/nuttx/configs/avr32dev1/ostest/defconfig index 7039557bc..77a668add 100755 --- a/nuttx/configs/avr32dev1/ostest/defconfig +++ b/nuttx/configs/avr32dev1/ostest/defconfig @@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/c5471evm/httpd/defconfig b/nuttx/configs/c5471evm/httpd/defconfig index 6f27c5708..66a070a0d 100644 --- a/nuttx/configs/c5471evm/httpd/defconfig +++ b/nuttx/configs/c5471evm/httpd/defconfig @@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/c5471evm/nettest/defconfig b/nuttx/configs/c5471evm/nettest/defconfig index 07b217fca..6daa4309b 100644 --- a/nuttx/configs/c5471evm/nettest/defconfig +++ b/nuttx/configs/c5471evm/nettest/defconfig @@ -147,8 +147,8 @@ CONFIG_NET_C5471_BASET10=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/c5471evm/nsh/defconfig b/nuttx/configs/c5471evm/nsh/defconfig index 81b09c570..8ad5bdce9 100644 --- a/nuttx/configs/c5471evm/nsh/defconfig +++ b/nuttx/configs/c5471evm/nsh/defconfig @@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/c5471evm/ostest/defconfig b/nuttx/configs/c5471evm/ostest/defconfig index d265a2b33..fa0f15446 100644 --- a/nuttx/configs/c5471evm/ostest/defconfig +++ b/nuttx/configs/c5471evm/ostest/defconfig @@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/demo9s12ne64/ostest/defconfig b/nuttx/configs/demo9s12ne64/ostest/defconfig index e3542a07c..3848c1a61 100755 --- a/nuttx/configs/demo9s12ne64/ostest/defconfig +++ b/nuttx/configs/demo9s12ne64/ostest/defconfig @@ -207,8 +207,8 @@ CONFIG_PASS1_OBJECT= # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/detron/hidkbd/defconfig b/nuttx/configs/detron/hidkbd/defconfig index b359b2953..00b6503f9 100755 --- a/nuttx/configs/detron/hidkbd/defconfig +++ b/nuttx/configs/detron/hidkbd/defconfig @@ -246,8 +246,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/detron/nsh/defconfig b/nuttx/configs/detron/nsh/defconfig index ac8a5259d..dc0952198 100755 --- a/nuttx/configs/detron/nsh/defconfig +++ b/nuttx/configs/detron/nsh/defconfig @@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/detron/ostest/defconfig b/nuttx/configs/detron/ostest/defconfig index 115ee6b74..4b8ef06cf 100755 --- a/nuttx/configs/detron/ostest/defconfig +++ b/nuttx/configs/detron/ostest/defconfig @@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/detron/wlan/defconfig b/nuttx/configs/detron/wlan/defconfig index bb55832aa..3eb7d82d5 100755 --- a/nuttx/configs/detron/wlan/defconfig +++ b/nuttx/configs/detron/wlan/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ea3131/nsh/defconfig b/nuttx/configs/ea3131/nsh/defconfig index 9c6faa8ac..29da6335d 100755 --- a/nuttx/configs/ea3131/nsh/defconfig +++ b/nuttx/configs/ea3131/nsh/defconfig @@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ea3131/ostest/defconfig b/nuttx/configs/ea3131/ostest/defconfig index 9df0b90c1..f085980ba 100755 --- a/nuttx/configs/ea3131/ostest/defconfig +++ b/nuttx/configs/ea3131/ostest/defconfig @@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ea3131/pgnsh/defconfig b/nuttx/configs/ea3131/pgnsh/defconfig index 471792d59..e24897d24 100755 --- a/nuttx/configs/ea3131/pgnsh/defconfig +++ b/nuttx/configs/ea3131/pgnsh/defconfig @@ -221,8 +221,8 @@ CONFIG_PASS1_OBJECT=locked.r # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ea3131/usbserial/defconfig b/nuttx/configs/ea3131/usbserial/defconfig index fcf8d0d03..29c169cfd 100755 --- a/nuttx/configs/ea3131/usbserial/defconfig +++ b/nuttx/configs/ea3131/usbserial/defconfig @@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ea3131/usbstorage/defconfig b/nuttx/configs/ea3131/usbstorage/defconfig index 7e6b26736..df2cb7464 100755 --- a/nuttx/configs/ea3131/usbstorage/defconfig +++ b/nuttx/configs/ea3131/usbstorage/defconfig @@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig index 78eda467d..200b9006c 100644 --- a/nuttx/configs/eagle100/httpd/defconfig +++ b/nuttx/configs/eagle100/httpd/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig index 31c4e3946..1f3e0ec5c 100644 --- a/nuttx/configs/eagle100/nettest/defconfig +++ b/nuttx/configs/eagle100/nettest/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig index d3a4642b0..400777d77 100644 --- a/nuttx/configs/eagle100/nsh/defconfig +++ b/nuttx/configs/eagle100/nsh/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig index d6782d333..712658716 100644 --- a/nuttx/configs/eagle100/nxflat/defconfig +++ b/nuttx/configs/eagle100/nxflat/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index 2f531a06e..5cf69cf43 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig index 08a6f4835..980211f1a 100644 --- a/nuttx/configs/eagle100/thttpd/defconfig +++ b/nuttx/configs/eagle100/thttpd/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200kitg/ostest/defconfig b/nuttx/configs/ez80f910200kitg/ostest/defconfig index 93960cd50..886533daa 100644 --- a/nuttx/configs/ez80f910200kitg/ostest/defconfig +++ b/nuttx/configs/ez80f910200kitg/ostest/defconfig @@ -181,8 +181,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/dhcpd/defconfig b/nuttx/configs/ez80f910200zco/dhcpd/defconfig index d2540d204..ca499c9a4 100644 --- a/nuttx/configs/ez80f910200zco/dhcpd/defconfig +++ b/nuttx/configs/ez80f910200zco/dhcpd/defconfig @@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/httpd/defconfig b/nuttx/configs/ez80f910200zco/httpd/defconfig index 1cbea1a6d..09acb43f3 100644 --- a/nuttx/configs/ez80f910200zco/httpd/defconfig +++ b/nuttx/configs/ez80f910200zco/httpd/defconfig @@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/nettest/defconfig b/nuttx/configs/ez80f910200zco/nettest/defconfig index 5cf42e7e0..6923717d4 100644 --- a/nuttx/configs/ez80f910200zco/nettest/defconfig +++ b/nuttx/configs/ez80f910200zco/nettest/defconfig @@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/nsh/defconfig b/nuttx/configs/ez80f910200zco/nsh/defconfig index 78741dad2..43c0a3de1 100644 --- a/nuttx/configs/ez80f910200zco/nsh/defconfig +++ b/nuttx/configs/ez80f910200zco/nsh/defconfig @@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/ostest/defconfig b/nuttx/configs/ez80f910200zco/ostest/defconfig index 4ab55d5f3..054e9fe0a 100644 --- a/nuttx/configs/ez80f910200zco/ostest/defconfig +++ b/nuttx/configs/ez80f910200zco/ostest/defconfig @@ -184,8 +184,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ez80f910200zco/poll/defconfig b/nuttx/configs/ez80f910200zco/poll/defconfig index 6d08c0391..c2a740152 100644 --- a/nuttx/configs/ez80f910200zco/poll/defconfig +++ b/nuttx/configs/ez80f910200zco/poll/defconfig @@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig index 27d09a868..1572b1456 100755 --- a/nuttx/configs/lm3s6965-ek/nsh/defconfig +++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig @@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig index 8c89c0594..759c14d3a 100755 --- a/nuttx/configs/lm3s6965-ek/nx/defconfig +++ b/nuttx/configs/lm3s6965-ek/nx/defconfig @@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig index 7c678b3a4..a9708b660 100755 --- a/nuttx/configs/lm3s6965-ek/ostest/defconfig +++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig @@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s8962-ek/nsh/defconfig b/nuttx/configs/lm3s8962-ek/nsh/defconfig index ef71ef662..4b4bbed6c 100755 --- a/nuttx/configs/lm3s8962-ek/nsh/defconfig +++ b/nuttx/configs/lm3s8962-ek/nsh/defconfig @@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s8962-ek/nx/defconfig b/nuttx/configs/lm3s8962-ek/nx/defconfig index 24d9e0ebc..e76f69a9e 100755 --- a/nuttx/configs/lm3s8962-ek/nx/defconfig +++ b/nuttx/configs/lm3s8962-ek/nx/defconfig @@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lm3s8962-ek/ostest/defconfig b/nuttx/configs/lm3s8962-ek/ostest/defconfig index a858ea3eb..a2e7a0379 100755 --- a/nuttx/configs/lm3s8962-ek/ostest/defconfig +++ b/nuttx/configs/lm3s8962-ek/ostest/defconfig @@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig index a638ba538..e60c02c1b 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/defconfig @@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig index 6a2dfb006..9884ec957 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nsh/defconfig @@ -255,8 +255,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig index 69b497b9a..477ca4ef7 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/nx/defconfig @@ -254,8 +254,8 @@ CONFIG_SPI_CMDDATA=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig index 718766c45..0975342d9 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig index 8816c7fdc..2c4a25224 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/thttpd/defconfig @@ -252,8 +252,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig index 04ce1472c..9df689f5c 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig +++ b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/m68332evb/defconfig b/nuttx/configs/m68332evb/defconfig index 7af074c76..2259d41b8 100644 --- a/nuttx/configs/m68332evb/defconfig +++ b/nuttx/configs/m68332evb/defconfig @@ -117,8 +117,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mbed/hidkbd/defconfig b/nuttx/configs/mbed/hidkbd/defconfig index 25260cee9..ead1cbf3e 100644 --- a/nuttx/configs/mbed/hidkbd/defconfig +++ b/nuttx/configs/mbed/hidkbd/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mbed/nsh/defconfig b/nuttx/configs/mbed/nsh/defconfig index 308e58bda..df99bb4ce 100755 --- a/nuttx/configs/mbed/nsh/defconfig +++ b/nuttx/configs/mbed/nsh/defconfig @@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mcu123-lpc214x/nsh/defconfig b/nuttx/configs/mcu123-lpc214x/nsh/defconfig index c5dad8825..872f8df0a 100644 --- a/nuttx/configs/mcu123-lpc214x/nsh/defconfig +++ b/nuttx/configs/mcu123-lpc214x/nsh/defconfig @@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mcu123-lpc214x/ostest/defconfig b/nuttx/configs/mcu123-lpc214x/ostest/defconfig index 5446b0ca8..06609469e 100644 --- a/nuttx/configs/mcu123-lpc214x/ostest/defconfig +++ b/nuttx/configs/mcu123-lpc214x/ostest/defconfig @@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig index 0f8d4925a..3a6edf786 100644 --- a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig @@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig index 142d7ba19..bf0eaba32 100644 --- a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig @@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/mx1ads/ostest/defconfig b/nuttx/configs/mx1ads/ostest/defconfig index ea908547f..6c19b4a83 100644 --- a/nuttx/configs/mx1ads/ostest/defconfig +++ b/nuttx/configs/mx1ads/ostest/defconfig @@ -167,8 +167,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ne64badge/ostest/defconfig b/nuttx/configs/ne64badge/ostest/defconfig index c46d58d43..d7eae861b 100755 --- a/nuttx/configs/ne64badge/ostest/defconfig +++ b/nuttx/configs/ne64badge/ostest/defconfig @@ -218,8 +218,8 @@ CONFIG_PASS1_OBJECT= # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/nettest/defconfig b/nuttx/configs/ntosd-dm320/nettest/defconfig index 87fd5d140..d66cb8dd0 100644 --- a/nuttx/configs/ntosd-dm320/nettest/defconfig +++ b/nuttx/configs/ntosd-dm320/nettest/defconfig @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/nsh/defconfig b/nuttx/configs/ntosd-dm320/nsh/defconfig index 78f2aeddb..f1f581513 100644 --- a/nuttx/configs/ntosd-dm320/nsh/defconfig +++ b/nuttx/configs/ntosd-dm320/nsh/defconfig @@ -154,8 +154,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/ostest/defconfig b/nuttx/configs/ntosd-dm320/ostest/defconfig index 246bbae29..a50d13d09 100644 --- a/nuttx/configs/ntosd-dm320/ostest/defconfig +++ b/nuttx/configs/ntosd-dm320/ostest/defconfig @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/poll/defconfig b/nuttx/configs/ntosd-dm320/poll/defconfig index 51c9981bf..6f82c44ea 100644 --- a/nuttx/configs/ntosd-dm320/poll/defconfig +++ b/nuttx/configs/ntosd-dm320/poll/defconfig @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/thttpd/defconfig b/nuttx/configs/ntosd-dm320/thttpd/defconfig index 886af9e89..9c614beaa 100644 --- a/nuttx/configs/ntosd-dm320/thttpd/defconfig +++ b/nuttx/configs/ntosd-dm320/thttpd/defconfig @@ -159,8 +159,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/udp/defconfig b/nuttx/configs/ntosd-dm320/udp/defconfig index 67c204bb2..643531c75 100644 --- a/nuttx/configs/ntosd-dm320/udp/defconfig +++ b/nuttx/configs/ntosd-dm320/udp/defconfig @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/ntosd-dm320/uip/defconfig b/nuttx/configs/ntosd-dm320/uip/defconfig index 2b0d101e6..9a747ebde 100644 --- a/nuttx/configs/ntosd-dm320/uip/defconfig +++ b/nuttx/configs/ntosd-dm320/uip/defconfig @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/nucleus2g/nsh/defconfig b/nuttx/configs/nucleus2g/nsh/defconfig index 4dc066b8a..a5308fd3a 100755 --- a/nuttx/configs/nucleus2g/nsh/defconfig +++ b/nuttx/configs/nucleus2g/nsh/defconfig @@ -245,8 +245,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/nucleus2g/ostest/defconfig b/nuttx/configs/nucleus2g/ostest/defconfig index 82549346c..16003686e 100755 --- a/nuttx/configs/nucleus2g/ostest/defconfig +++ b/nuttx/configs/nucleus2g/ostest/defconfig @@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/nucleus2g/usbserial/defconfig b/nuttx/configs/nucleus2g/usbserial/defconfig index 7d9ed920f..4a4d1926f 100755 --- a/nuttx/configs/nucleus2g/usbserial/defconfig +++ b/nuttx/configs/nucleus2g/usbserial/defconfig @@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/nucleus2g/usbstorage/defconfig b/nuttx/configs/nucleus2g/usbstorage/defconfig index 372703806..2ef1c287d 100755 --- a/nuttx/configs/nucleus2g/usbstorage/defconfig +++ b/nuttx/configs/nucleus2g/usbstorage/defconfig @@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig index 5da615c1b..5f1eb61be 100755 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig index 87a8de988..8f2f02937 100755 --- a/nuttx/configs/olimex-lpc1766stk/nettest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nettest/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig index 5c8bcf067..c177f11ef 100755 --- a/nuttx/configs/olimex-lpc1766stk/nsh/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nsh/defconfig @@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/nx/defconfig b/nuttx/configs/olimex-lpc1766stk/nx/defconfig index 2731d8b22..1ffd9defe 100755 --- a/nuttx/configs/olimex-lpc1766stk/nx/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/nx/defconfig @@ -248,8 +248,8 @@ CONFIG_SPI_CMDDATA=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig index fca6bf11b..4f6fc29f0 100755 --- a/nuttx/configs/olimex-lpc1766stk/ostest/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/ostest/defconfig @@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig index 068d44f8a..641572163 100755 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/defconfig @@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig index bcc8a458b..61e66a817 100755 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig @@ -246,8 +246,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig index f5237146f..cb55b85a3 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbserial/defconfig @@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig index 10e7e2bcb..975bddc8a 100755 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/defconfig @@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig index 53a5f02af..3f60ec1ad 100755 --- a/nuttx/configs/olimex-lpc1766stk/wlan/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/wlan/defconfig @@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc2378/nsh/defconfig b/nuttx/configs/olimex-lpc2378/nsh/defconfig index 7aaeb27ae..561096828 100755 --- a/nuttx/configs/olimex-lpc2378/nsh/defconfig +++ b/nuttx/configs/olimex-lpc2378/nsh/defconfig @@ -172,8 +172,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-lpc2378/ostest/defconfig b/nuttx/configs/olimex-lpc2378/ostest/defconfig index 3e1093723..f462c21d6 100755 --- a/nuttx/configs/olimex-lpc2378/ostest/defconfig +++ b/nuttx/configs/olimex-lpc2378/ostest/defconfig @@ -172,8 +172,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig index 159c5916a..684f20b00 100755 --- a/nuttx/configs/olimex-strp711/nettest/defconfig +++ b/nuttx/configs/olimex-strp711/nettest/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-strp711/nsh/defconfig b/nuttx/configs/olimex-strp711/nsh/defconfig index cf324c4dc..6ef24e489 100644 --- a/nuttx/configs/olimex-strp711/nsh/defconfig +++ b/nuttx/configs/olimex-strp711/nsh/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/olimex-strp711/ostest/defconfig b/nuttx/configs/olimex-strp711/ostest/defconfig index d914aaa74..d30994270 100644 --- a/nuttx/configs/olimex-strp711/ostest/defconfig +++ b/nuttx/configs/olimex-strp711/ostest/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/pcblogic-pic32mx/ostest/defconfig b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig index 2b2ca4674..7966c1b49 100644 --- a/nuttx/configs/pcblogic-pic32mx/ostest/defconfig +++ b/nuttx/configs/pcblogic-pic32mx/ostest/defconfig @@ -217,8 +217,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/pjrc-8051/defconfig b/nuttx/configs/pjrc-8051/defconfig index 811d346b5..32341becb 100644 --- a/nuttx/configs/pjrc-8051/defconfig +++ b/nuttx/configs/pjrc-8051/defconfig @@ -115,8 +115,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/qemu-i486/nsh/defconfig b/nuttx/configs/qemu-i486/nsh/defconfig index 9660d737a..890d82dea 100644 --- a/nuttx/configs/qemu-i486/nsh/defconfig +++ b/nuttx/configs/qemu-i486/nsh/defconfig @@ -185,7 +185,7 @@ CONFIG_UART3_2STOP=0 # memory manager must handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot time console # output. -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz or TICKS_PER_MSEC=10. +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz or MSEC_PER_TICK=10. # This setting may be defined to inform NuttX that the processor hardware is # providing system timer interrupts at some interrupt interval other than 10 # msec. diff --git a/nuttx/configs/qemu-i486/ostest/defconfig b/nuttx/configs/qemu-i486/ostest/defconfig index 1de263651..816974678 100644 --- a/nuttx/configs/qemu-i486/ostest/defconfig +++ b/nuttx/configs/qemu-i486/ostest/defconfig @@ -101,7 +101,7 @@ CONFIG_ARCH_DMA=n # memory manager must handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot time console # output. -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz or TICKS_PER_MSEC=10. +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz or MSEC_PER_TICK=10. # This setting may be defined to inform NuttX that the processor hardware is # providing system timer interrupts at some interrupt interval other than 10 # msec. diff --git a/nuttx/configs/sam3u-ek/knsh/defconfig b/nuttx/configs/sam3u-ek/knsh/defconfig index 677cb548a..51f83efc3 100755 --- a/nuttx/configs/sam3u-ek/knsh/defconfig +++ b/nuttx/configs/sam3u-ek/knsh/defconfig @@ -233,8 +233,8 @@ CONFIG_PASS1_OBJECT= # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sam3u-ek/nsh/defconfig b/nuttx/configs/sam3u-ek/nsh/defconfig index d1b271e28..9294603f4 100755 --- a/nuttx/configs/sam3u-ek/nsh/defconfig +++ b/nuttx/configs/sam3u-ek/nsh/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sam3u-ek/nx/defconfig b/nuttx/configs/sam3u-ek/nx/defconfig index f06c2c234..ea1b60936 100755 --- a/nuttx/configs/sam3u-ek/nx/defconfig +++ b/nuttx/configs/sam3u-ek/nx/defconfig @@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sam3u-ek/ostest/defconfig b/nuttx/configs/sam3u-ek/ostest/defconfig index a90e7cc7a..cf4f15024 100755 --- a/nuttx/configs/sam3u-ek/ostest/defconfig +++ b/nuttx/configs/sam3u-ek/ostest/defconfig @@ -216,8 +216,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/mount/defconfig b/nuttx/configs/sim/mount/defconfig index 9738f8cbd..ee37111d4 100644 --- a/nuttx/configs/sim/mount/defconfig +++ b/nuttx/configs/sim/mount/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/nettest/defconfig b/nuttx/configs/sim/nettest/defconfig index 88e899f61..bb00f3f59 100644 --- a/nuttx/configs/sim/nettest/defconfig +++ b/nuttx/configs/sim/nettest/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/nsh/defconfig b/nuttx/configs/sim/nsh/defconfig index 7cd746c6e..18722b15c 100644 --- a/nuttx/configs/sim/nsh/defconfig +++ b/nuttx/configs/sim/nsh/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/nx/defconfig b/nuttx/configs/sim/nx/defconfig index 2d5825f51..2962d6b0b 100644 --- a/nuttx/configs/sim/nx/defconfig +++ b/nuttx/configs/sim/nx/defconfig @@ -71,8 +71,8 @@ CONFIG_SIM_FBBPP=8 # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/nx/defconfig-x11 b/nuttx/configs/sim/nx/defconfig-x11 index ec90d0181..27a6a51fa 100644 --- a/nuttx/configs/sim/nx/defconfig-x11 +++ b/nuttx/configs/sim/nx/defconfig-x11 @@ -71,8 +71,8 @@ CONFIG_SIM_FBBPP=32 # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/nxffs/defconfig b/nuttx/configs/sim/nxffs/defconfig index 15560befe..2030608cd 100644 --- a/nuttx/configs/sim/nxffs/defconfig +++ b/nuttx/configs/sim/nxffs/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/ostest/defconfig b/nuttx/configs/sim/ostest/defconfig index f970524f5..df9bdf825 100644 --- a/nuttx/configs/sim/ostest/defconfig +++ b/nuttx/configs/sim/ostest/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/sim/pashello/defconfig b/nuttx/configs/sim/pashello/defconfig index 082bd66a0..c00e25b15 100644 --- a/nuttx/configs/sim/pashello/defconfig +++ b/nuttx/configs/sim/pashello/defconfig @@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/skp16c26/ostest/defconfig b/nuttx/configs/skp16c26/ostest/defconfig index 363c9a432..cef59192b 100644 --- a/nuttx/configs/skp16c26/ostest/defconfig +++ b/nuttx/configs/skp16c26/ostest/defconfig @@ -162,8 +162,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig index b802ef9f4..3a7555068 100755 --- a/nuttx/configs/stm3210e-eval/RIDE/defconfig +++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig @@ -238,8 +238,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig index 2ec1edc33..be344261f 100755 --- a/nuttx/configs/stm3210e-eval/nsh/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh/defconfig @@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig index 8df5955cb..1d4adf35c 100755 --- a/nuttx/configs/stm3210e-eval/ostest/defconfig +++ b/nuttx/configs/stm3210e-eval/ostest/defconfig @@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/stm3210e-eval/usbserial/defconfig b/nuttx/configs/stm3210e-eval/usbserial/defconfig index 78d2f9472..5e7c7ecd2 100755 --- a/nuttx/configs/stm3210e-eval/usbserial/defconfig +++ b/nuttx/configs/stm3210e-eval/usbserial/defconfig @@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/stm3210e-eval/usbstorage/defconfig b/nuttx/configs/stm3210e-eval/usbstorage/defconfig index 506f0c08e..dd93e81e7 100755 --- a/nuttx/configs/stm3210e-eval/usbstorage/defconfig +++ b/nuttx/configs/stm3210e-eval/usbstorage/defconfig @@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/us7032evb1/nsh/defconfig b/nuttx/configs/us7032evb1/nsh/defconfig index eb023ecb2..eab7e1ca6 100644 --- a/nuttx/configs/us7032evb1/nsh/defconfig +++ b/nuttx/configs/us7032evb1/nsh/defconfig @@ -166,8 +166,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/us7032evb1/ostest/defconfig b/nuttx/configs/us7032evb1/ostest/defconfig index 40cd908f9..81f205372 100644 --- a/nuttx/configs/us7032evb1/ostest/defconfig +++ b/nuttx/configs/us7032evb1/ostest/defconfig @@ -166,8 +166,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/vsn/nsh/defconfig b/nuttx/configs/vsn/nsh/defconfig index dd5b1ca37..1b979ad16 100755 --- a/nuttx/configs/vsn/nsh/defconfig +++ b/nuttx/configs/vsn/nsh/defconfig @@ -311,8 +311,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/xtrs/nsh/defconfig b/nuttx/configs/xtrs/nsh/defconfig index ec73f289f..12a73fe6e 100644 --- a/nuttx/configs/xtrs/nsh/defconfig +++ b/nuttx/configs/xtrs/nsh/defconfig @@ -107,8 +107,8 @@ CONFIG_LINKER_ROM_AT_0000=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/xtrs/ostest/defconfig b/nuttx/configs/xtrs/ostest/defconfig index 00c7cf090..974c2a731 100644 --- a/nuttx/configs/xtrs/ostest/defconfig +++ b/nuttx/configs/xtrs/ostest/defconfig @@ -107,8 +107,8 @@ CONFIG_LINKER_ROM_AT_0000=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/xtrs/pashello/defconfig b/nuttx/configs/xtrs/pashello/defconfig index 942d7f732..8a3001438 100644 --- a/nuttx/configs/xtrs/pashello/defconfig +++ b/nuttx/configs/xtrs/pashello/defconfig @@ -107,8 +107,8 @@ CONFIG_LINKER_ROM_AT_0000=y # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z16f2800100zcog/ostest/defconfig b/nuttx/configs/z16f2800100zcog/ostest/defconfig index b84cc5040..89e3d163d 100644 --- a/nuttx/configs/z16f2800100zcog/ostest/defconfig +++ b/nuttx/configs/z16f2800100zcog/ostest/defconfig @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z16f2800100zcog/pashello/defconfig b/nuttx/configs/z16f2800100zcog/pashello/defconfig index c253f9aaa..3c89dfc07 100644 --- a/nuttx/configs/z16f2800100zcog/pashello/defconfig +++ b/nuttx/configs/z16f2800100zcog/pashello/defconfig @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z80sim/nsh/defconfig b/nuttx/configs/z80sim/nsh/defconfig index 58b1538b1..da704a791 100644 --- a/nuttx/configs/z80sim/nsh/defconfig +++ b/nuttx/configs/z80sim/nsh/defconfig @@ -97,8 +97,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z80sim/ostest/defconfig b/nuttx/configs/z80sim/ostest/defconfig index 80bad0681..e66e34591 100644 --- a/nuttx/configs/z80sim/ostest/defconfig +++ b/nuttx/configs/z80sim/ostest/defconfig @@ -97,8 +97,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z80sim/pashello/defconfig b/nuttx/configs/z80sim/pashello/defconfig index 4f0a2ef0f..2a3977919 100644 --- a/nuttx/configs/z80sim/pashello/defconfig +++ b/nuttx/configs/z80sim/pashello/defconfig @@ -97,8 +97,8 @@ CONFIG_HAVE_LIBM=n # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z8encore000zco/ostest/defconfig b/nuttx/configs/z8encore000zco/ostest/defconfig index 0b87b751b..d1cca6fe4 100644 --- a/nuttx/configs/z8encore000zco/ostest/defconfig +++ b/nuttx/configs/z8encore000zco/ostest/defconfig @@ -131,8 +131,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/configs/z8f64200100kit/ostest/defconfig b/nuttx/configs/z8f64200100kit/ostest/defconfig index c552987bc..326e3e92d 100644 --- a/nuttx/configs/z8f64200100kit/ostest/defconfig +++ b/nuttx/configs/z8f64200100kit/ostest/defconfig @@ -131,8 +131,8 @@ CONFIG_HAVE_LIBM=n # time console output # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot # time console input -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. diff --git a/nuttx/include/nuttx/resource.h b/nuttx/include/nuttx/resource.h new file mode 100644 index 000000000..b8e66446b --- /dev/null +++ b/nuttx/include/nuttx/resource.h @@ -0,0 +1,193 @@ +/**************************************************************************** + * include/nuttx/resource.h + * + * Copyright(C) 2011 Uros Platise. All rights reserved. + * Author: Uros Platise <uros.platise@isotel.eu> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** \file + * \author Uros Platise + * \brief System Resources + * + * System resource provides interface to device drivers to list possible + * configurations that can be changed by system to minimize (optimize) + * energy and power usage, to lock a specific resource, fixing it at + * desired value and to support multiple power down capabilities by the + * up_idle(). + * + * System resources are provided on the chip or board level, such as: + * - clock scaling (chip level) + * - voltage scaling (board level) + * + * This interface is to be used by low-level peripherals only and its + * purpose is to be as fast as possible to do quick power and energy + * optimizations (including deep power savings). + * + * A separate common device driver interface would be required to allow + * access from user programs (i.e. to select voltage and similar). + **/ + +#ifdef CONFIG_RESOURCE + +#ifndef __INCLUDE_NUTTX_RESOURCE_H +#define __INCLUDE_NUTTX_RESOURCE_H + +#include <nuttx/config.h> +#include <nuttx/arch/chip/resource.h> +#include <nuttx/arch/board/resource.h> + +#include <stdint.h> + +/**************************************************************************** + * TO BE MOVED UNDER arch/chip/resource.h + ****************************************************************************/ + +/** Clocking */ +#define RESOURCE_CLOCK_HCLK +#define RESOURCE_CLOCK_PCLK1 +#define RESOURCE_CLOCK_PCLK2 + + +/**************************************************************************** + * TO BE MOVED UNDER arch/board/resource.h + ****************************************************************************/ + +/** Voltage, Vcc Minimum Requirements */ +#define RESOURCE_VOLTAGE_VCC_MIN2_3 0x00 +#define RESOURCE_VOLTAGE_VCC_MIN3_0 0x01 /* A/D converter starts working at this level */ +#define RESOURCE_VOLTAGE_VCC_MIN3_3 0x02 + + +/**************************************************************************** + * Available Options to be enabled in the .config + ****************************************************************************/ + +#if 0 + +/** Enable Resources + */ +#define CONFIG_RESOURCE + +/** Enable resource: clock scaling, allocates an array of options bits + * for each peripheral. On STM32 this option adds about 64-128 bytes. + * This option is provided by chip: nuttx/arch/board/resource.h + * + * Clock resources are used by low-level driver before they starts a + * transaction. System may pick up any of the clock options that suit + * all of the drivers. The selected clock option is returned, and is up + * to the driver to recalculate and modify i.e. period or additional + * prescaler to achieve the desired frequency of operation. After lock() + * call, clock will not change, until unlock() is called. + * + * As long there is a single clock lock, system will not be able to + * enter low power-down mode in which all of the clocks are disabled. + * + * The isactive() function is called typically by the up_idle() to + * decide which power-down mode to select. If none of the clocks are + * required to run, then ultra low power-down mode can be entered, + * reducing power as low as downto 35 uA or 25 uA (with LDO in low-power + * mode). + * + * Note: AD may continue to consume power in stop mode, so it's up + * to AD driver to disable its power when its unused. + */ +#define CONFIG_RESOURCE_CLOCK_SCALING + +/** Enable resource: voltage scaling. + * + * This option is provided by the board: nuttx/arch/board/resource.h + */ +#define CONFIG_RESOURCE_VOLTAGE_SCALING + +/** Resource Check: check for multiple locks/unlocks conditions and + * report errors. + * + * For proper operation after lock(resourceN) only one unlock(resourceN) + * may follow. Enabling this option adds time consuming checks to detect + * errors in low-level drivers. + */ +#define CONFIG_RESOURCE_CHECK_MULTIPLES + +#endif + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/**************************************************************************** + * Public Interface + ****************************************************************************/ + +/** Resource Interface */ + +struct resource_ops_s { + + /** Set possible options for specific domain and peripheral ID */ + uint32_t (*setopts)(struct resource_dev_t *dev, uint8_t domain_id); + + /** Get available options */ + uint32_t (*getopts)(struct resource_dev_t *dev, uint8_t domain); + + /** Lock resource, means, that it cannot be changed meanwhile */ + uint32_t (*lock)(struct resource_dev_t *dev, uint8_t domain_id); + + /** Unlock resource, means, allow further changes */ + uint32_t (*unlock)(struct resource_dev_t *dev, uint8_t domain_id); + + /** Reports present activity + * \retval >0 activity + * \retval =0 Inactivity allowing system entering deep power down modes. + * \retval <0 internal error, system cannot resolve requests. + */ + int (*isactive)(struct resource_dev_t *dev); +}; + +#define RESOURCE_SETOPTS(dev, domain_id) dev->setopts(dev, domain_id) +#define RESOURCE_GETOPTS(dev, domain) dev->getopts(dev, domain) +#define RESOURCE_LOCK(dev, domain_id) dev->lock(dev, domain_id) +#define RESOURCE_UNLOCK(dev, domain_id) dev->unlock(dev, domain_id) +#define RESOURCE_ISACTIVE(dev) dev->isactive(dev) + + +#undef EXTERN +#if defined(__cplusplus) +} +#endif +#endif /* __INCLUDE_NUTTX_EVENT_H */ +#endif /* CONFIG_RESOURCE */ |