diff options
| -rw-r--r-- | apps/builtin/exec_builtin.c | 2 | ||||
| -rw-r--r-- | nuttx/ChangeLog | 2 | ||||
| -rw-r--r-- | nuttx/configs/stm32f4discovery/README.txt | 59 | ||||
| -rw-r--r-- | nuttx/configs/stm32f4discovery/nsh/appconfig | 67 | ||||
| -rw-r--r-- | nuttx/configs/stm32f4discovery/nsh/defconfig | 1161 | ||||
| -rw-r--r-- | nuttx/configs/stm32f4discovery/pm/defconfig | 2 |
6 files changed, 616 insertions, 677 deletions
diff --git a/apps/builtin/exec_builtin.c b/apps/builtin/exec_builtin.c index 60e8b742d..5d3a1c08a 100644 --- a/apps/builtin/exec_builtin.c +++ b/apps/builtin/exec_builtin.c @@ -309,7 +309,7 @@ static inline int builtin_startproxy(int index, FAR const char **argv, { struct sched_param param; pid_t proxy; - int errcode; + int errcode = OK; #ifdef CONFIG_SCHED_WAITPID int status; #endif diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 76ed2b603..4fc75c084 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -4048,4 +4048,6 @@ * sched/os_start.c: Fix ordering of group initialization. * configs/stm32f4discovery/usbnsh: Add an NSH STM32F4Discovery configuration that uses USB CDC/ACM for the NSH console. + * configs/stm32f4discovery/nsh: Converted to use the kconfig-frontends + tools. diff --git a/nuttx/configs/stm32f4discovery/README.txt b/nuttx/configs/stm32f4discovery/README.txt index 0e295c429..207ee6cde 100644 --- a/nuttx/configs/stm32f4discovery/README.txt +++ b/nuttx/configs/stm32f4discovery/README.txt @@ -1165,14 +1165,30 @@ Where <subdir> is one of the following: nsh: --- Configures the NuttShell (nsh) located at apps/examples/nsh. The - Configuration enables both the serial and telnet NSH interfaces. + Configuration enables the serial interfaces on UART2. Support for + builtin applications is enabled, but in the base configuration no + builtin applications are selected (see NOTES below). - Default toolchain: + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: - CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ - NOTES: - 1. This example supports the PWM test (apps/examples/pwm) but this must + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. By default, this configuration uses the CodeSourcery toolchain + for Windows and builds under Cygwin (or probably MSYS). That + can easily be reconfigured, of course. + + CONFIG_HOST_WINDOWS=y : Builds under Windows + CONFIG_WINDOWS_CYGWIN=y : Using Cygwin + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows + + 3. This example supports the PWM test (apps/examples/pwm) but this must be manually enabled by selecting: CONFIG_PWM=y : Enable the generic PWM infrastructure @@ -1185,27 +1201,28 @@ Where <subdir> is one of the following: CONFIG_DEBUG_PWM - 2. This example supports the Quadrature Encode test (apps/examples/qencoder) + 5. This example supports the Quadrature Encode test (apps/examples/qencoder) but this must be manually enabled by selecting: - CONFIG_QENCODER=y : Enable the generic Quadrature Encoder infrastructure - CONFIG_STM32_TIM8=y : Enable TIM8 - CONFIG_STM32_TIM2=n : (Or optionally TIM2) - CONFIG_STM32_TIM8_QE=y : Use TIM8 as the quadrature encoder - CONFIG_STM32_TIM2_QE=y : (Or optionally TIM2) + CONFIG_EXAMPLES_QENCODER=y : Enable the apps/examples/qencoder + CONFIG_SENSORS=y : Enable support for sensors + CONFIG_QENCODER=y : Enable the generic Quadrature Encoder infrastructure + CONFIG_STM32_TIM8=y : Enable TIM8 + CONFIG_STM32_TIM2=n : (Or optionally TIM2) + CONFIG_STM32_TIM8_QE=y : Use TIM8 as the quadrature encoder + CONFIG_STM32_TIM2_QE=y : (Or optionally TIM2) - See also apps/examples/README.txt - - Special PWM-only debug options: + See also apps/examples/README.tx. Special PWM-only debug options: CONFIG_DEBUG_QENCODER - 3. This example supports the watchdog timer test (apps/examples/watchdog) + 6. This example supports the watchdog timer test (apps/examples/watchdog) but this must be manually enabled by selecting: - CONFIG_WATCHDOG=y : Enables watchdog timer driver support - CONFIG_STM32_WWDG=y : Enables the WWDG timer facility, OR - CONFIG_STM32_IWDG=y : Enables the IWDG timer facility (but not both) + CONFIG_EXAMPLES_WATCHDOG=y : Enable the apps/examples/watchdog + CONFIG_WATCHDOG=y : Enables watchdog timer driver support + CONFIG_STM32_WWDG=y : Enables the WWDG timer facility, OR + CONFIG_STM32_IWDG=y : Enables the IWDG timer facility (but not both) The WWDG watchdog is driven off the (fast) 42MHz PCLK1 and, as result, has a maximum timeout value of 49 milliseconds. for WWDG watchdog, you @@ -1216,14 +1233,14 @@ Where <subdir> is one of the following: The IWDG timer has a range of about 35 seconds and should not be an issue. - 4. USB Support (CDC/ACM device) + 7. USB Support (CDC/ACM device) CONFIG_STM32_OTGFS=y : STM32 OTG FS support CONFIG_USBDEV=y : USB device support must be enabled CONFIG_CDCACM=y : The CDC/ACM driver must be built CONFIG_NSH_BUILTIN_APPS=y : NSH built-in application support must be enabled - 5. Using the USB console. + 8. Using the USB console. The STM32F4Discovery NSH configuration can be set up to use a USB CDC/ACM (or PL2303) USB console. The normal way that you would configure the @@ -1268,7 +1285,7 @@ Where <subdir> is one of the following: you can still use certain kinds of debug output (see include/debug.h, all of the interfaces based on lib_lowprintf will work in this configuration). - 6. USB OTG FS Host Support. The following changes will enable support for + 9. USB OTG FS Host Support. The following changes will enable support for a USB host on the STM32F4Discovery, including support for a mass storage class driver: diff --git a/nuttx/configs/stm32f4discovery/nsh/appconfig b/nuttx/configs/stm32f4discovery/nsh/appconfig deleted file mode 100644 index 097948c87..000000000 --- a/nuttx/configs/stm32f4discovery/nsh/appconfig +++ /dev/null @@ -1,67 +0,0 @@ -############################################################################ -# configs/stm32f4discovery/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# The NSH application library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - -# Applications configured as an NX built-in commands - -ifeq ($(CONFIG_ADC),y) -CONFIGURED_APPS += examples/adc -endif - -ifeq ($(CONFIG_PWM),y) -CONFIGURED_APPS += examples/pwm -endif - -ifeq ($(CONFIG_QENCODER),y) -CONFIGURED_APPS += examples/qencoder -endif - -ifeq ($(CONFIG_USBDEV),y) -ifeq ($(CONFIG_CDCACM),y) -CONFIGURED_APPS += examples/cdcacm -endif -endif - -ifeq ($(CONFIG_WATCHDOG),y) -CONFIGURED_APPS += examples/watchdog -endif diff --git a/nuttx/configs/stm32f4discovery/nsh/defconfig b/nuttx/configs/stm32f4discovery/nsh/defconfig index 3ec117055..ea97dfeff 100644 --- a/nuttx/configs/stm32f4discovery/nsh/defconfig +++ b/nuttx/configs/stm32f4discovery/nsh/defconfig @@ -1,713 +1,700 @@ -############################################################################ -# configs/stm32f4discovery/nsh/defconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM4=y -CONFIG_ARCH_CHIP="stm32" -CONFIG_ARCH_CHIP_STM32F407VG=y -CONFIG_ARCH_BOARD="stm32f4discovery" -CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y -CONFIG_BOARD_LOOPSPERMSEC=16717 -CONFIG_DRAM_SIZE=114688 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_FPU=n -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y # -# Identify toolchain and linker options +# Build Setup # -CONFIG_STM32_CODESOURCERYW=n -CONFIG_STM32_CODESOURCERYL=y -CONFIG_STM32_ATOLLIC_LITE=n -CONFIG_STM32_ATOLLIC_PRO=n -CONFIG_STM32_DEVKITARM=n -CONFIG_STM32_RAISONANCE=n -CONFIG_STM32_BUILDROOT=n +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set # -# JTAG Enable settings (by default only SW-DP is enabled): +# Build Configuration # -CONFIG_STM32_DFU=n -CONFIG_STM32_JTAG_FULL_ENABLE=n -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=y +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set # -# Individual subsystems can be enabled: -# -# AHB1: -CONFIG_STM32_CRC=n -CONFIG_STM32_BKPSRAM=n -CONFIG_STM32_CCMDATARAM=n -CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n -CONFIG_STM32_ETHMAC=n -CONFIG_STM32_OTGHS=n -# AHB2: -CONFIG_STM32_DCMI=n -CONFIG_STM32_CRYP=n -CONFIG_STM32_HASH=n -CONFIG_STM32_RNG=n +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F103RET6 is not set +# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set +# CONFIG_ARCH_CHIP_STM32F103VET6 is not set +# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set +# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +CONFIG_ARCH_CHIP_STM32F407VG=y +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +CONFIG_STM32_STM32F40XX=y +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKPSRAM is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CCMDATARAM is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_I2C3 is not set +# CONFIG_STM32_IWDG is not set CONFIG_STM32_OTGFS=y -# AHB3: -CONFIG_STM32_FSMC=n -# APB1: -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_TIM12=n -CONFIG_STM32_TIM13=n -CONFIG_STM32_TIM14=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_IWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_SPI3=n -CONFIG_STM32_USART2=y -CONFIG_STM32_USART3=n -CONFIG_STM32_UART4=n -CONFIG_STM32_UART5=n -CONFIG_STM32_I2C1=n -CONFIG_STM32_I2C2=n -CONFIG_STM32_I2C3=n -CONFIG_STM32_CAN1=n -CONFIG_STM32_CAN2=n -CONFIG_STM32_DAC=n +# CONFIG_STM32_OTGHS is not set CONFIG_STM32_PWR=y -# APB2: -CONFIG_STM32_TIM1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=n -CONFIG_STM32_USART6=n -CONFIG_STM32_ADC1=n -CONFIG_STM32_ADC2=n -CONFIG_STM32_ADC3=n -CONFIG_STM32_SDIO=n +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set CONFIG_STM32_SPI1=y +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set CONFIG_STM32_SYSCFG=y -CONFIG_STM32_TIM9=n -CONFIG_STM32_TIM10=n -CONFIG_STM32_TIM11=n +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +# CONFIG_STM32_TIM9 is not set +# CONFIG_STM32_TIM10 is not set +# CONFIG_STM32_TIM11 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_USART1 is not set +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USART6 is not set +# CONFIG_STM32_WWDG is not set +CONFIG_STM32_SPI=y # -# STM32F40xxx specific serial device driver settings +# Alternate Pin Mapping # -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=y -CONFIG_USART3_SERIAL_CONSOLE=n -CONFIG_UART4_SERIAL_CONSOLE=n -CONFIG_UART5_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=128 -CONFIG_USART2_TXBUFSIZE=128 -CONFIG_USART3_TXBUFSIZE=128 -CONFIG_UART4_TXBUFSIZE=128 -CONFIG_UART5_TXBUFSIZE=128 - -CONFIG_USART1_RXBUFSIZE=128 -CONFIG_USART2_RXBUFSIZE=128 -CONFIG_USART3_RXBUFSIZE=128 -CONFIG_UART4_RXBUFSIZE=128 -CONFIG_UART5_RXBUFSIZE=128 - -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 -CONFIG_UART4_BAUD=115200 -CONFIG_UART5_BAUD=115200 +# CONFIG_STM32_FLASH_PREFETCH is not set +# CONFIG_STM32_JTAG_DISABLE is not set +# CONFIG_STM32_JTAG_FULL_ENABLE is not set +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +CONFIG_STM32_JTAG_SW_ENABLE=y +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32_CCMEXCLUDE is not set +CONFIG_STM32_USART=y -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 -CONFIG_UART4_BITS=8 -CONFIG_UART5_BITS=8 +# +# U[S]ART Configuration +# +# CONFIG_USART2_RS485 is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 -CONFIG_UART4_PARITY=0 -CONFIG_UART5_PARITY=0 +# +# SPI Configuration +# +# CONFIG_STM32_SPI_INTERRUPTS is not set +# CONFIG_STM32_SPI_DMA is not set -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 -CONFIG_UART4_2STOP=0 -CONFIG_UART5_2STOP=0 +# +# USB Host Configuration +# # -# STM32F40xxx specific SPI device driver settings +# External Memory Configuration # -CONFIG_SPI_EXCHANGE=y # -# STM32F40xxx specific CAN device driver settings +# Architecture Options # -CONFIG_CAN=n -CONFIG_CAN_EXTID=n -#CONFIG_CAN_FIFOSIZE -#CONFIG_CAN_NPENDINGRTR -CONFIG_CAN_LOOPBACK=n -CONFIG_CAN1_BAUD=700000 -CONFIG_CAN2_BAUD=700000 +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set # -# STM32F40xxx Ethernet device driver settings +# Board Settings # -CONFIG_STM32_PHYADDR=1 -CONFIG_STM32_MII=y -CONFIG_STM32_MII_MCO1=y -CONFIG_STM32_MII_MCO2=n -CONFIG_STM32_RMII=n -CONFIG_STM32_AUTONEG=y -#CONFIG_STM32_ETHFD -#CONFIG_STM32_ETH100MB -CONFIG_STM32_PHYSR=16 -CONFIG_STM32_PHYSR_SPEED=0x0002 -CONFIG_STM32_PHYSR_100MBPS=0x0000 -CONFIG_STM32_PHYSR_MODE=0x0004 -CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 -CONFIG_STM32_ETH_PTP=n -CONFIG_STM32_ETHMAC_REGDEBUG=n +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=114688 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 # -# PWM configuration +# Boot options # -# The stm32f4discovery has no real on-board PWM devices, but the board can be configured to output -# a pulse train using TIM4 CH2. (Don't forget to set CONFIG_STM32_TIM4=y above) +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + # -CONFIG_PWM=n -CONFIG_STM32_TIM4_PWM=y -CONFIG_STM32_TIM4_CHANNEL=2 +# Board Selection +# +CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32f4discovery" # -# Quadrature Encoder configuration. +# Common Board Options # -CONFIG_QENCODER=n -CONFIG_STM32_TIM2_QE=n -CONFIG_STM32_TIM2_QECLKOUT=28000000 -CONFIG_STM32_TIM8_QE=y -CONFIG_STM32_TIM8_QECLKOUT=28000000 +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 # -# General build options +# Board-Specific Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y # -# General OS setup +# RTOS Features # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_FS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_DEBUG_LCD=n -CONFIG_DEBUG_USB=n -CONFIG_DEBUG_NET=n -CONFIG_DEBUG_RTC=n -CONFIG_DEBUG_ANALOG=n -CONFIG_DEBUG_PWM=n -CONFIG_DEBUG_CAN=n -CONFIG_DEBUG_QENCODER=n -CONFIG_HAVE_CXX=y -CONFIG_HAVE_CXXINITIALIZE=y -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2011 CONFIG_START_MONTH=12 CONFIG_START_DAY=6 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 +# CONFIG_SCHED_WORKQUEUE is not set CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set # -# Settings for NXFLAT +# Signal Numbers # -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Sizes of configurable things (0 disables) # -# There are certain dependency relationships in these -# features. +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_ARCH_HAVE_I2CRESET=y +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_USART2=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_USART2_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# Misc libc settings +# USART2 Configuration # -CONFIG_NOPRINTF_FIELDWIDTH=n +CONFIG_USART2_RXBUFSIZE=128 +CONFIG_USART2_TXBUFSIZE=128 +CONFIG_USART2_BAUD=115200 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# Allow for architecture optimized implementations +# System Logging Device Options +# + # -# The architecture can provide optimized versions of the -# following to improve system performance +# System Logging # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +# CONFIG_RAMLOG is not set # -# Sizes of configurable things (0 disables) +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_BINFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options # -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=256 CONFIG_STDIO_LINEBUFFER=y CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# Framebuffer driver options +# Non-standard Helper Functions # -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY +# CONFIG_LIB_KBDCODEC is not set # -# Filesystem configuration +# Basic CXX Support # -CONFIG_FS_FAT=n -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set # -# SPI-based MMC/SD driver +# uClibc++ Standard C++ Library # -CONFIG_MMCSD_NSLOTS=0 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +# CONFIG_UCLIBCXX is not set # -# Block driver buffering +# Application Configuration # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n # -# STM32 SDIO-based MMC/SD driver +# Built-In Applications # -CONFIG_SDIO_DMA=n -#CONFIG_SDIO_PRI=128 -#CONFIG_SDIO_DMAPRIO -#CONFIG_SDIO_WIDTH_D1_ONLY -CONFIG_MMCSD_MULTIBLOCK_DISABLE=y -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 # -# TCP/IP and UDP support via uIP +# Examples # -CONFIG_NET=n -CONFIG_NET_NOINTS=n -CONFIG_NET_MULTIBUFFER=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=10 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=562 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=40 -#CONFIG_NET_TCP_READAHEAD_BUFSIZE -CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 -CONFIG_NET_TCPBACKLOG=y -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=y -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -CONFIG_NET_BROADCAST=n -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_ARP_IPIN=n -CONFIG_NET_MULTICAST=n - -# -# UIP Network Utilities +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Interpreters # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 # -# RTC Configuration +# Interpreters # -CONFIG_RTC=n -CONFIG_RTC_DATETIME=y -CONFIG_RTC_HIRES=n -CONFIG_RTC_FREQUENCY=1 -CONFIG_RTC_ALARM=n - -# -# STM32 USB OTG FS Device Configuration -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# STM32 USB OTG FS Host Configuration -# -CONFIG_USBHOST=n -#CONFIG_STM32_OTGFS_RXFIFO_SIZE -#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE -#CONFIG_STM32_OTGFS_PTXFIFO_SIZE -#CONFIG_STM32_OTGFS_DESCSIZE -CONFIG_STM32_OTGFS_SOFINTR=n -CONFIG_STM32_USBHOST_REGDEBUG=n -CONFIG_STM32_USBHOST_PKTDUMP=n - -# -# USB Serial Device Configuration (Prolifics PL2303 emulation) -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB serial device class driver (Standard CDC ACM class) -# -CONFIG_CDCACM=n -CONFIG_CDCACM_CONSOLE=n -#CONFIG_CDCACM_EP0MAXPACKET -CONFIG_CDCACM_EPINTIN=1 -#CONFIG_CDCACM_EPINTIN_FSSIZE -#CONFIG_CDCACM_EPINTIN_HSSIZE -CONFIG_CDCACM_EPBULKOUT=3 -#CONFIG_CDCACM_EPBULKOUT_FSSIZE -#CONFIG_CDCACM_EPBULKOUT_HSSIZE -CONFIG_CDCACM_EPBULKIN=2 -#CONFIG_CDCACM_EPBULKIN_FSSIZE -#CONFIG_CDCACM_EPBULKIN_HSSIZE -#CONFIG_CDCACM_NWRREQS -#CONFIG_CDCACM_NRDREQS -#CONFIG_CDCACM_VENDORID -#CONFIG_CDCACM_VENDORSTR -#CONFIG_CDCACM_PRODUCTID -#CONFIG_CDCACM_PRODUCTSTR -#CONFIG_CDCACM_RXBUFSIZE -#CONFIG_CDCACM_TXBUFSIZE - -# -# USB Storage Device Configuration -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Watchdog timer configuration -# -CONFIG_WATCHDOG=n - -# -# Graphics related configuration settings -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=1 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=0xd69a -CONFIG_NXTK_BORDERCOLOR2=0xad55 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS17X22=y -CONFIG_NXFONT_SANS20X26=n -CONFIG_NXFONT_SANS22X29=n -CONFIG_NXFONT_SANS23X27=n -CONFIG_NXFONT_SANS28X37=n -CONFIG_NXFONT_SANS17X23B=n -CONFIG_NXFONT_SANS20X27B=y -CONFIG_NXFONT_SANS22X29B=y -CONFIG_NXFONT_SANS28X37B=n -CONFIG_NXFONT_SANS40X49B=n -CONFIG_NXFONT_SERIF22X29=n -CONFIG_NXFONT_SERIF29X37=n -CONFIG_NXFONT_SERIF38X48=n -CONFIG_NXFONT_SERIF22X28B=n -CONFIG_NXFONT_SERIF27X38B=n -CONFIG_NXFONT_SERIF38X49B=n -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=y -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + # -CONFIG_BUILTIN=y +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_USBCONSOLE=n -CONFIG_NSH_USBCONDEV="/dev/ttyACM0" -CONFIG_NSH_UBSDEV_MINOR=0 -CONFIG_NSH_USBDEV_TRACEINIT=n -CONFIG_NSH_USBDEV_TRACECLASS=n -CONFIG_NSH_USBDEV_TRACETRANSFERS=n -CONFIG_NSH_USBDEV_TRACECONTROLLER=n -CONFIG_NSH_USBDEV_TRACEINTERRUPTS=n -#CONFIG_NSH_CONDEV -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set # -# Settings for examples/usbserial +# NxWidgets/NxWM # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n # -# Settings for examples/cdcacm -# -# Configuration prequisites: +# System NSH Add-Ons # -CONFIG_EXAMPLES_CDCACM_DEVMINOR=0 -CONFIG_EXAMPLES_CDCACM_TRACEINIT=n -CONFIG_EXAMPLES_CDCACM_TRACECLASS=n -CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS=n -CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER=n -CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS=n # -# Settings for examples/adc +# Custom Free Memory Command # +# CONFIG_SYSTEM_FREE is not set # -# Settings for examples/can +# I2C tool # # -# Settings for examples/pwm +# FLASH Program Installation # +# CONFIG_SYSTEM_INSTALL is not set # -# Settings for examples/watchdog +# readline() # +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y -# This test depends on these specific Watchdog/NSH configurations settings (your -# specific watchdog hardware settings might require additional settings). # +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set # -# Settings for examples/watchdog +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + # -# This test depends on these specific Watchdog/NSH configurations settings (your -# specific watchdog hardware settings might require additional settings). +# SD Card # +# CONFIG_SYSTEM_SDCARD is not set # -# Stack and heap information +# Sysinfo # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/stm32f4discovery/pm/defconfig b/nuttx/configs/stm32f4discovery/pm/defconfig index 332235050..981a8abb2 100644 --- a/nuttx/configs/stm32f4discovery/pm/defconfig +++ b/nuttx/configs/stm32f4discovery/pm/defconfig @@ -635,7 +635,7 @@ CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_USBCONSOLE=n CONFIG_NSH_USBCONDEV="/dev/ttyACM0" -CONFIG_NSH_UBSDEV_MINOR=0 +CONFIG_NSH_USBDEV_MINOR=0 CONFIG_NSH_USBDEV_TRACEINIT=n CONFIG_NSH_USBDEV_TRACECLASS=n CONFIG_NSH_USBDEV_TRACETRANSFERS=n |