diff options
| -rw-r--r-- | nuttx/ChangeLog | 2 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/README.txt | 18 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/telnetd/appconfig | 44 | ||||
| -rw-r--r-- | nuttx/configs/stm3220g-eval/telnetd/defconfig | 1277 | ||||
| -rw-r--r-- | nuttx/configs/stm3240g-eval/README.txt | 2 |
5 files changed, 791 insertions, 552 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 3f6a48ab0..6f5072044 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -6805,3 +6805,5 @@ kconfig-frontends tools (2014-3-4) * configs/stm3240g-eval/telnetd: Configuration converted to use the kconfig-frontends tools (2014-3-4) + * configs/stm3220g-eval/telnetd: Configuration converted to use the + kconfig-frontends tools (2014-3-4) diff --git a/nuttx/configs/stm3220g-eval/README.txt b/nuttx/configs/stm3220g-eval/README.txt index 420f832f6..0aff45d10 100644 --- a/nuttx/configs/stm3220g-eval/README.txt +++ b/nuttx/configs/stm3220g-eval/README.txt @@ -856,6 +856,7 @@ Where <subdir> is one of the following: CONFIG_NSH_DRIPADDR=(192<<24|168<<16|13<<8|1) : Host IP address 192.168.8.1 NOTES: + 1. This configuration uses the mconf-based configuration tool. To change this configurations using that tool, you should: @@ -1155,3 +1156,20 @@ Where <subdir> is one of the following: use NSH, then you don't care about this. This test is good for testing the Telnet daemon only because it works in a simpler environment than does the nsh configuration. + + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 3. Default build environment (easily reconfigured): + + CONFIG_HOST_WINDOWS=y + CONFIG_WINDOWS_CYGWIN=y + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y diff --git a/nuttx/configs/stm3220g-eval/telnetd/appconfig b/nuttx/configs/stm3220g-eval/telnetd/appconfig deleted file mode 100644 index 70cdf7771..000000000 --- a/nuttx/configs/stm3220g-eval/telnetd/appconfig +++ /dev/null @@ -1,44 +0,0 @@ -############################################################################ -# configs/stm3220g-eval/telnetd/appconfig -# -# Copyright (C) 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/telnetd - -# Networking support - -CONFIGURED_APPS += netutils/uiplib -CONFIGURED_APPS += netutils/telnetd - diff --git a/nuttx/configs/stm3220g-eval/telnetd/defconfig b/nuttx/configs/stm3220g-eval/telnetd/defconfig index 7ee9da0d6..11957e451 100644 --- a/nuttx/configs/stm3220g-eval/telnetd/defconfig +++ b/nuttx/configs/stm3220g-eval/telnetd/defconfig @@ -1,322 +1,432 @@ -############################################################################ -# configs/stm3220g-eval/telnetd/defconfig -# -# Copyright (C) 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP="stm32" -CONFIG_ARCH_CHIP_STM32F207IG=y -CONFIG_ARCH_BOARD="stm3220g-eval" -CONFIG_ARCH_BOARD_STM3220G_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=10926 -CONFIG_RAM_SIZE=196608 -CONFIG_RAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y # -# Identify toolchain and linker options +# Build Setup # -CONFIG_STM32_CODESOURCERYW=y -CONFIG_STM32_CODESOURCERYL=n -CONFIG_STM32_ATOLLIC_LITE=n -CONFIG_STM32_ATOLLIC_PRO=n -CONFIG_STM32_DEVKITARM=n -CONFIG_STM32_RAISONANCE=n -CONFIG_STM32_BUILDROOT=n +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set # -# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): +# Build Configuration # -CONFIG_STM32_DFU=y -CONFIG_STM32_JTAG_FULL_ENABLE=y -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=n +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set # -# On-board FSMC SRAM configuration +# Binary Output Formats # -CONFIG_STM32_FSMC_SRAM=y -CONFIG_HEAP2_BASE=0x64000000 -CONFIG_HEAP2_SIZE=2097152 - +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + # -# Individual subsystems can be enabled: +# Customize Header Files # -# AHB1: -CONFIG_STM32_CRC=n -CONFIG_STM32_BKPSRAM=n -CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n -CONFIG_STM32_ETHMAC=y -CONFIG_STM32_OTGHS=n -# AHB2: -CONFIG_STM32_DCMI=n -CONFIG_STM32_CRYP=n -CONFIG_STM32_HASH=n -CONFIG_STM32_RNG=n -CONFIG_STM32_OTGFS=n -# AHB3: -CONFIG_STM32_FSMC=n -# APB1: -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_TIM12=n -CONFIG_STM32_TIM13=n -CONFIG_STM32_TIM14=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_IWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_SPI3=n -CONFIG_STM32_USART2=n -CONFIG_STM32_USART3=y -CONFIG_STM32_UART4=n -CONFIG_STM32_UART5=n -CONFIG_STM32_I2C1=n -CONFIG_STM32_I2C2=n -CONFIG_STM32_I2C3=n -CONFIG_STM32_CAN1=n -CONFIG_STM32_CAN2=n -CONFIG_STM32_DAC=n -CONFIG_STM32_PWR=n -# APB2: -CONFIG_STM32_TIM1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=n -CONFIG_STM32_USART6=n -CONFIG_STM32_ADC1=n -CONFIG_STM32_ADC2=n -CONFIG_STM32_ADC3=n -CONFIG_STM32_SDIO=n -CONFIG_STM32_SPI1=n -CONFIG_STM32_SYSCFG=y -CONFIG_STM32_TIM9=n -CONFIG_STM32_TIM10=n -CONFIG_STM32_TIM11=n +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set # -# STM32F20xxx specific serial device driver settings +# Debug Options # -CONFIG_USART1_SERIAL_CONSOLE=n -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=y -CONFIG_UART4_SERIAL_CONSOLE=n -CONFIG_UART5_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=128 -CONFIG_USART2_TXBUFSIZE=128 -CONFIG_USART3_TXBUFSIZE=128 -CONFIG_UART4_TXBUFSIZE=128 -CONFIG_UART5_TXBUFSIZE=128 +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +CONFIG_ARCH_HAVE_HEAPCHECK=y +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y -CONFIG_USART1_RXBUFSIZE=128 -CONFIG_USART2_RXBUFSIZE=128 -CONFIG_USART3_RXBUFSIZE=128 -CONFIG_UART4_RXBUFSIZE=128 -CONFIG_UART5_RXBUFSIZE=128 - -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 -CONFIG_UART4_BAUD=115200 -CONFIG_UART5_BAUD=115200 +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 -CONFIG_UART4_BITS=8 -CONFIG_UART5_BITS=8 +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +CONFIG_ARCH_CORTEXM3=y +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_HAVE_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +# CONFIG_SERIAL_TERMIOS is not set +# CONFIG_NET_MULTICAST is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set +# CONFIG_ARCH_CHIP_STM32F103T8 is not set +# CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103CB is not set +# CONFIG_ARCH_CHIP_STM32F103R8 is not set +# CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103V8 is not set +# CONFIG_ARCH_CHIP_STM32F103VB is not set +# CONFIG_ARCH_CHIP_STM32F103RET6 is not set +# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set +# CONFIG_ARCH_CHIP_STM32F103VET6 is not set +# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set +# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +CONFIG_ARCH_CHIP_STM32F207IG=y +# CONFIG_ARCH_CHIP_STM32F207ZE is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_ARCH_CHIP_STM32F429V is not set +# CONFIG_ARCH_CHIP_STM32F429Z is not set +# CONFIG_ARCH_CHIP_STM32F429I is not set +# CONFIG_ARCH_CHIP_STM32F429B is not set +# CONFIG_ARCH_CHIP_STM32F429N is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +# CONFIG_STM32_STM32F10XX is not set +# CONFIG_STM32_VALUELINE is not set +# CONFIG_STM32_CONNECTIVITYLINE is not set +# CONFIG_STM32_PERFORMANCELINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +# CONFIG_STM32_MEDIUMDENSITY is not set +# CONFIG_STM32_LOWDENSITY is not set +CONFIG_STM32_STM32F20XX=y +# CONFIG_STM32_STM32F30XX is not set +# CONFIG_STM32_STM32F40XX is not set +CONFIG_STM32_DFU=y -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 -CONFIG_UART4_PARITY=0 -CONFIG_UART5_PARITY=0 +# +# STM32 Peripheral Support +# +# CONFIG_STM32_HAVE_USBDEV is not set +CONFIG_STM32_HAVE_OTGFS=y +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKPSRAM is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +CONFIG_STM32_ETHMAC=y +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_I2C3 is not set +# CONFIG_STM32_OTGFS is not set +# CONFIG_STM32_OTGHS is not set +# CONFIG_STM32_PWR is not set +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set +# CONFIG_STM32_SPI1 is not set +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +CONFIG_STM32_SYSCFG=y +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +# CONFIG_STM32_TIM9 is not set +# CONFIG_STM32_TIM10 is not set +# CONFIG_STM32_TIM11 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_USART1 is not set +# CONFIG_STM32_USART2 is not set +CONFIG_STM32_USART3=y +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USART6 is not set +# CONFIG_STM32_IWDG is not set +# CONFIG_STM32_WWDG is not set -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 -CONFIG_UART4_2STOP=0 -CONFIG_UART5_2STOP=0 +# +# Alternate Pin Mapping +# +# CONFIG_STM32_FLASH_PREFETCH is not set +# CONFIG_STM32_JTAG_DISABLE is not set +CONFIG_STM32_JTAG_FULL_ENABLE=y +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +# CONFIG_STM32_JTAG_SW_ENABLE is not set +# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32_CCMEXCLUDE is not set +CONFIG_STM32_USART=y # -# STM32F20xxx specific CAN device driver settings +# U[S]ART Configuration # -CONFIG_CAN=n -CONFIG_CAN_EXTID=n -#CONFIG_CAN_FIFOSIZE -#CONFIG_CAN_NPENDINGRTR -CONFIG_CAN_LOOPBACK=n -CONFIG_CAN1_BAUD=700000 -CONFIG_CAN2_BAUD=700000 +# CONFIG_USART3_RS485 is not set +# CONFIG_SERIAL_DISABLE_REORDERING is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set # -# STM32F20xxx Ethernet device driver settings +# Ethernet MAC configuration # CONFIG_STM32_PHYADDR=1 +# CONFIG_STM32_PHYINIT is not set CONFIG_STM32_MII=y CONFIG_STM32_MII_MCO1=y -CONFIG_STM32_MII_MCO2=n -CONFIG_STM32_RMII=n +# CONFIG_STM32_MII_MCO2 is not set +# CONFIG_STM32_MII_EXTCLK is not set CONFIG_STM32_AUTONEG=y -#CONFIG_STM32_ETHFD -#CONFIG_STM32_ETH100MBPS CONFIG_STM32_PHYSR=16 +# CONFIG_STM32_PHYSR_ALTCONFIG is not set CONFIG_STM32_PHYSR_SPEED=0x0002 CONFIG_STM32_PHYSR_100MBPS=0x0000 CONFIG_STM32_PHYSR_MODE=0x0004 CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 -CONFIG_STM32_ETH_PTP=n -CONFIG_STM32_ETHMAC_REGDEBUG=n +# CONFIG_STM32_ETH_PTP is not set # -# I2C configuration +# USB Host Configuration # -CONFIG_I2C=n -CONFIG_I2C_POLLED=y -CONFIG_I2C_TRANSFER=y -CONFIG_I2C_TRACE=n # -# General build options +# USB Device Configuration # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n # -# General OS setup +# Architecture Options # -CONFIG_USER_ENTRYPOINT="shell_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_NET=n -CONFIG_HAVE_CXX=y -CONFIG_HAVE_CXXINITIALIZE=y -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2012 -CONFIG_START_MONTH=12 -CONFIG_START_DAY=6 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 -CONFIG_SCHED_WAITPID=y -CONFIG_SCHED_ATEXIT=n +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +# CONFIG_ARCH_NAND_HWECC is not set +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set # -# Settings for NXFLAT +# Board Settings # -CONFIG_NXFLAT=n -CONFIG_NXFLAT_DUMPBUFFER=n -CONFIG_SYMTAB_ORDEREDBYNAME=y +CONFIG_BOARD_LOOPSPERMSEC=10926 +# CONFIG_ARCH_CALIBRATION is not set # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Interrupt options # -# There are certain dependency relationships in these -# features. +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Boot options # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set # -# Misc libc settings +# Boot Memory Configuration # -CONFIG_NOPRINTF_FIELDWIDTH=n +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=196608 +# CONFIG_ARCH_HAVE_SDRAM is not set # -# Allow for architecture optimized implementations +# Board Selection +# +CONFIG_ARCH_BOARD_STM3220G_EVAL=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm3220g-eval" + # -# The architecture can provide optimized versions of the -# following to improve system performance +# Common Board Options # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +# CONFIG_SYSTEM_TIME64 is not set +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2012 +CONFIG_START_MONTH=12 +CONFIG_START_DAY=6 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="shell_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +CONFIG_DISABLE_PTHREAD=y +# CONFIG_DISABLE_SIGNALS is not set +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_ENVIRON=y + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 # # Sizes of configurable things (0 disables) @@ -327,9 +437,6 @@ CONFIG_NPTHREAD_KEYS=0 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 CONFIG_PREALLOC_MQ_MSGS=0 CONFIG_MQ_MAXMSGSIZE=0 CONFIG_MAX_WDOGPARMS=4 @@ -337,313 +444,469 @@ CONFIG_PREALLOC_WDOGS=8 CONFIG_PREALLOC_TIMERS=8 # -# Framebuffer driver options +# Stack and heap information # -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Filesystem configuration +# Device Drivers # -CONFIG_FS_FAT=n -CONFIG_FAT_LCNAMES=y -CONFIG_FAT_LFN=y -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +CONFIG_NETDEVICES=y + +# +# General Ethernet MAC Driver Options +# +# CONFIG_NETDEV_MULTINIC is not set + +# +# External Ethernet MAC Device Support +# +# CONFIG_NET_DM90x0 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_NET_E1000 is not set +# CONFIG_NET_SLIP is not set +# CONFIG_NET_VNET is not set + +# +# External Ethernet PHY Device Support +# +# CONFIG_ETH0_PHY_NONE is not set +# CONFIG_ETH0_PHY_AM79C874 is not set +# CONFIG_ETH0_PHY_KS8721 is not set +# CONFIG_ETH0_PHY_KSZ8051 is not set +# CONFIG_ETH0_PHY_KSZ90x1 is not set +CONFIG_ETH0_PHY_DP83848C=y +# CONFIG_ETH0_PHY_LAN8720 is not set +# CONFIG_ETH0_PHY_DM9161 is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_USART3=y # -# Maintain legacy build behavior (revisit) +# USART Configuration # - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y +CONFIG_USART3_ISUART=y +CONFIG_MCU_SERIAL=y +CONFIG_USART3_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# SPI-based MMC/SD driver +# USART3 Configuration # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +CONFIG_USART3_RXBUFSIZE=128 +CONFIG_USART3_TXBUFSIZE=128 +CONFIG_USART3_BAUD=115200 +CONFIG_USART3_BITS=8 +CONFIG_USART3_PARITY=0 +CONFIG_USART3_2STOP=0 +# CONFIG_USART3_IFLOWCONTROL is not set +# CONFIG_USART3_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# Block driver buffering +# System Logging Device Options # -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n # -# STM32 SDIO-based MMC/SD driver +# System Logging # -CONFIG_SDIO_DMA=n -#CONFIG_SDIO_PRI=128 -#CONFIG_SDIO_DMAPRIO -#CONFIG_SDIO_WIDTH_D1_ONLY -CONFIG_MMCSD_MULTIBLOCK_DISABLE=y -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n +# CONFIG_RAMLOG is not set # -# TCP/IP and UDP support via uIP +# Networking Support # +CONFIG_ARCH_HAVE_NET=y +CONFIG_ARCH_HAVE_PHY=y CONFIG_NET=y -CONFIG_NET_NOINTS=n +# CONFIG_NET_NOINTS is not set CONFIG_NET_MULTIBUFFER=y -CONFIG_NET_IPv6=n +# CONFIG_NET_PROMISCUOUS is not set CONFIG_NSOCKET_DESCRIPTORS=10 +CONFIG_NET_NACTIVESOCKETS=16 CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 +# CONFIG_NET_SOLINGER is not set +CONFIG_NET_BUFSIZE=562 +# CONFIG_NET_TCPURGDATA is not set + +# +# TCP/IP Networking +# CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=40 +CONFIG_NET_MAX_LISTENPORTS=40 CONFIG_NET_TCP_READAHEAD=y -#CONFIG_NET_TCP_READAHEAD_BUFSIZE +CONFIG_NET_TCP_READAHEAD_BUFSIZE=536 CONFIG_NET_NTCP_READAHEAD_BUFFERS=8 -CONFIG_NET_TCPBACKLOG=n -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 +# CONFIG_NET_TCP_WRITE_BUFFERS is not set +CONFIG_NET_TCP_RECVDELAY=0 +# CONFIG_NET_TCPBACKLOG is not set +# CONFIG_NET_TCP_SPLIT is not set +# CONFIG_NET_SENDFILE is not set + +# +# UDP Networking +# +# CONFIG_NET_UDP is not set CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=n -#CONFIG_NET_RECEIVE_WINDOW= -CONFIG_NET_BROADCAST=n -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_ARP_IPIN=n -CONFIG_NET_MULTICAST=n +# CONFIG_NET_ICMP_PING is not set +# CONFIG_NET_PINGADDRCONF is not set +# CONFIG_NET_IGMP is not set +# CONFIG_NET_STATISTICS is not set +CONFIG_NET_RECEIVE_WINDOW=536 +CONFIG_NET_ARPTAB_SIZE=16 +# CONFIG_NET_ARP_IPIN is not set +# CONFIG_NET_ROUTE is not set # -# UIP Network Utilities +# File Systems # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 # -# RTC Configuration +# File system configuration # -CONFIG_RTC=n -CONFIG_RTC_DATETIME=y -CONFIG_RTC_HIRES=n -CONFIG_RTC_FREQUENCY=1 -CONFIG_RTC_ALARM=n +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_PROCFS is not set # -# USB Device Configuration +# System Logging # -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Serial Device Configuration -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Watchdog timer configuration -# -CONFIG_WATCHDOG=n - -# -# Graphics related configuration settings -# -CONFIG_NX=n -CONFIG_NX_MULTIUSER=n -CONFIG_NX_NPLANES=1 -CONFIG_NX_DISABLE_1BPP=y -CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=y -CONFIG_NX_DISABLE_8BPP=y -CONFIG_NX_DISABLE_16BPP=n -CONFIG_NX_DISABLE_24BPP=y -CONFIG_NX_DISABLE_32BPP=y -CONFIG_NX_PACKEDMSFIRST=n -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=1 -CONFIG_LCD_MAXCONTRAST=1 -CONFIG_NX_MOUSE=y -CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=0xd69a -CONFIG_NXTK_BORDERCOLOR2=0xad55 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS17X22=y -CONFIG_NXFONT_SANS20X26=n -CONFIG_NXFONT_SANS22X29=n -CONFIG_NXFONT_SANS23X27=n -CONFIG_NXFONT_SANS28X37=n -CONFIG_NXFONT_SANS17X23B=n -CONFIG_NXFONT_SANS20X27B=y -CONFIG_NXFONT_SANS22X29B=y -CONFIG_NXFONT_SANS28X37B=n -CONFIG_NXFONT_SANS40X49B=n -CONFIG_NXFONT_SERIF22X29=n -CONFIG_NXFONT_SERIF29X37=n -CONFIG_NXFONT_SERIF38X48=n -CONFIG_NXFONT_SERIF22X28B=n -CONFIG_NXFONT_SERIF27X38B=n -CONFIG_NXFONT_SERIF38X49B=n -CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -# -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=y -CONFIG_EXAMPLES_NETTEST_NOMAC=y -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/telnetd +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + # -CONFIG_EXAMPLES_TELNETD_DAEMONPRIO=128 -CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE=2048 -CONFIG_EXAMPLES_TELNETD_CLIENTPRIO=128 -CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE=2048 +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=0 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +CONFIG_EXAMPLES_TELNETD=y CONFIG_EXAMPLES_TELNETD_NOMAC=y CONFIG_EXAMPLES_TELNETD_IPADDR=0x0a000002 CONFIG_EXAMPLES_TELNETD_DRIPADDR=0x0a000001 CONFIG_EXAMPLES_TELNETD_NETMASK=0xffffff00 +CONFIG_EXAMPLES_TELNETD_DAEMONPRIO=128 +CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE=2048 +CONFIG_EXAMPLES_TELNETD_CLIENTPRIO=128 +CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE=2048 +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WGET is not set # -# Settings for examples/ostest +# Graphics Support # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +# CONFIG_TIFF is not set # -# Settings for apps/nshlib +# Interpreters # -CONFIG_NSH_BUILTIN_APPS=n -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=y -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set # -# Architecture-specific NSH options +# Network Utilities # -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 # -# I2C tool settings +# Networking Utilities # -CONFIG_I2CTOOL_MINBUS=1 -CONFIG_I2CTOOL_MAXBUS=3 -#CONFIG_I2CTOOL_MINADDR -#CONFIG_I2CTOOL_MAXADDR -#CONFIG_I2CTOOL_MAXREGADDR -CONFIG_I2CTOOL_DEFFREQ=100000 +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set +CONFIG_NETUTILS_TELNETD=y +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +CONFIG_NETUTILS_UIPLIB=y +# CONFIG_NETUTILS_WEBCLIENT is not set +# CONFIG_NETUTILS_WEBSERVER is not set +# CONFIG_NETUTILS_XMLRPC is not set # -# Settings for examples/usbserial +# FreeModBus # -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n +# CONFIG_MODBUS is not set -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set # -# Settings for examples/watchdog +# NxWidgets/NxWM # -# This test depends on these specific Watchdog/NSH configurations settings (your -# specific watchdog hardware settings might require additional settings). + +# +# Platform-specific Support # +# CONFIG_PLATFORM_CONFIGDATA is not set # -# Stack and heap information +# System Libraries and NSH Add-Ons # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -# Application configuration +# +# USB CDC/ACM Device Commands +# -# CONFIG_APPS_DIR="../apps" +# +# USB Composite Device Commands +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# INI File Parser +# +# CONFIG_SYSTEM_INIFILE is not set + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# NxPlayer media player library / command Line +# +# CONFIG_SYSTEM_NXPLAYER is not set + +# +# RAM test +# +# CONFIG_SYSTEM_RAMTEST is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# + +# +# EMACS-like Command Line Editor +# +# CONFIG_SYSTEM_CLE is not set + +# +# VI Work-Alike Editor +# +# CONFIG_SYSTEM_VI is not set + +# +# Stack Monitor +# + +# +# USB Mass Storage Device Commands +# + +# +# Zmodem Commands +# +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt index 4c3533ce6..9d9c1f5d1 100644 --- a/nuttx/configs/stm3240g-eval/README.txt +++ b/nuttx/configs/stm3240g-eval/README.txt @@ -1538,7 +1538,7 @@ Where <subdir> is one of the following: b. Execute 'make menuconfig' in nuttx/ in order to start the reconfiguration process. - 2. Default build environment (also easily reconfigured): + 2. Default build environment (easily reconfigured): CONFIG_HOST_WINDOWS=y CONFIG_WINDOWS_CYGWIN=y |