diff options
58 files changed, 90 insertions, 3236 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index f9e1bf5d0..1aa2d9f15 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -3500,4 +3500,9 @@ initial reset in the open/setup logic. Opening the ADC driver works the first time, but not the second because the device is left in a powered down state on the last close. - + * configs/olimex-lpc1766stck/scripts: Replace all of the identical + ld.script files with the common one in this directory. + * configs/stm3220g-eval/scripts: Replace all of the identical + ld.script files with the common one in this directory. + * configs/hymini-stm32v/scripts: Replace all of the identical + ld.script files with the common one in this directory. diff --git a/nuttx/configs/hymini-stm32v/buttons/Make.defs b/nuttx/configs/hymini-stm32v/buttons/Make.defs index efc29cb1d..565729c1a 100644 --- a/nuttx/configs/hymini-stm32v/buttons/Make.defs +++ b/nuttx/configs/hymini-stm32v/buttons/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/buttons/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/buttons/ld.script b/nuttx/configs/hymini-stm32v/buttons/ld.script deleted file mode 100644 index ef6968958..000000000 --- a/nuttx/configs/hymini-stm32v/buttons/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/buttons/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103VCT6 has 256Kb of FLASH beginning at address 0x0800:0000 and - * 48Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103V has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/buttons/ld.script.dfu b/nuttx/configs/hymini-stm32v/buttons/ld.script.dfu deleted file mode 100644 index 5c839a0d8..000000000 --- a/nuttx/configs/hymini-stm32v/buttons/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/buttons/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nsh/Make.defs b/nuttx/configs/hymini-stm32v/nsh/Make.defs index cade80762..285bbe40a 100644 --- a/nuttx/configs/hymini-stm32v/nsh/Make.defs +++ b/nuttx/configs/hymini-stm32v/nsh/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/nsh/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/nsh/ld.script b/nuttx/configs/hymini-stm32v/nsh/ld.script deleted file mode 100755 index c09e716cb..000000000 --- a/nuttx/configs/hymini-stm32v/nsh/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nsh/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nsh/ld.script.dfu b/nuttx/configs/hymini-stm32v/nsh/ld.script.dfu deleted file mode 100755 index 5dfc51ad1..000000000 --- a/nuttx/configs/hymini-stm32v/nsh/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nsh/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nsh2/Make.defs b/nuttx/configs/hymini-stm32v/nsh2/Make.defs index 269b4979e..9ad8c2774 100644 --- a/nuttx/configs/hymini-stm32v/nsh2/Make.defs +++ b/nuttx/configs/hymini-stm32v/nsh2/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/nsh2/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/nsh2/ld.script b/nuttx/configs/hymini-stm32v/nsh2/ld.script deleted file mode 100644 index 1b861e6b6..000000000 --- a/nuttx/configs/hymini-stm32v/nsh2/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nsh2/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103VCT6 has 256Kb of FLASH beginning at address 0x0800:0000 and - * 48Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nsh2/ld.script.dfu b/nuttx/configs/hymini-stm32v/nsh2/ld.script.dfu deleted file mode 100644 index a8d0839c1..000000000 --- a/nuttx/configs/hymini-stm32v/nsh2/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nsh2/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nx/Make.defs b/nuttx/configs/hymini-stm32v/nx/Make.defs index fce4ec279..84700e082 100644 --- a/nuttx/configs/hymini-stm32v/nx/Make.defs +++ b/nuttx/configs/hymini-stm32v/nx/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/nx/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/nx/ld.script.dfu b/nuttx/configs/hymini-stm32v/nx/ld.script.dfu deleted file mode 100644 index bd995086f..000000000 --- a/nuttx/configs/hymini-stm32v/nx/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nx/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nxlines/Make.defs b/nuttx/configs/hymini-stm32v/nxlines/Make.defs index 8943c4cb7..b9e8841f0 100644 --- a/nuttx/configs/hymini-stm32v/nxlines/Make.defs +++ b/nuttx/configs/hymini-stm32v/nxlines/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/nxlines/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -89,13 +89,13 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/nxlines/ld.script b/nuttx/configs/hymini-stm32v/nxlines/ld.script deleted file mode 100644 index 4938ad501..000000000 --- a/nuttx/configs/hymini-stm32v/nxlines/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nxlines/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103VCT6 has 256Kb of FLASH beginning at address 0x0800:0000 and - * 48Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/nxlines/ld.script.dfu b/nuttx/configs/hymini-stm32v/nxlines/ld.script.dfu deleted file mode 100644 index b64109da8..000000000 --- a/nuttx/configs/hymini-stm32v/nxlines/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/nxlines/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/usbserial/ld.script b/nuttx/configs/hymini-stm32v/scripts/ld.script index 8a8361614..cef391bf4 100755..100644 --- a/nuttx/configs/hymini-stm32v/usbserial/ld.script +++ b/nuttx/configs/hymini-stm32v/scripts/ld.script @@ -1,10 +1,10 @@ /**************************************************************************** - * configs/hymini-stm32v/usbserial/ld.script + * configs/hymini-stm32v/scripts/ld.script * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * Laurent Latil <laurent@latil.nom.fr> - + * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: diff --git a/nuttx/configs/hymini-stm32v/nx/ld.script b/nuttx/configs/hymini-stm32v/scripts/ld.script.dfu index c4a12d2b9..1f51a9fc3 100644 --- a/nuttx/configs/hymini-stm32v/nx/ld.script +++ b/nuttx/configs/hymini-stm32v/scripts/ld.script.dfu @@ -1,7 +1,7 @@ /**************************************************************************** - * configs/hymini-stm32v/nx/ld.script + * configs/hymini-stm32v/scripts/ld.script.dfu * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -34,15 +34,14 @@ ****************************************************************************/ /* The STM32F103VCT6 has 256Kb of FLASH beginning at address 0x0800:0000 and - * 48Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. + * 48Kb of SRAM beginning at address 0x2000:0000. Here we assume that the + * Hy-Mini STM32v's DFU bootloader is being used. In that case, the correct + * load .text load address is 0x08003000 (leaving 244Kb). */ MEMORY { - flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K + flash (rx) : ORIGIN = 0x08003000, LENGTH = 244K sram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K } diff --git a/nuttx/configs/hymini-stm32v/usbserial/Make.defs b/nuttx/configs/hymini-stm32v/usbserial/Make.defs index 1e8c90b12..559af81de 100644 --- a/nuttx/configs/hymini-stm32v/usbserial/Make.defs +++ b/nuttx/configs/hymini-stm32v/usbserial/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/usbserial/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/usbserial/ld.script.dfu b/nuttx/configs/hymini-stm32v/usbserial/ld.script.dfu deleted file mode 100755 index 5734ed267..000000000 --- a/nuttx/configs/hymini-stm32v/usbserial/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/usbserial/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/usbstorage/Make.defs b/nuttx/configs/hymini-stm32v/usbstorage/Make.defs index 8acc8db4a..5fef4f705 100644 --- a/nuttx/configs/hymini-stm32v/usbstorage/Make.defs +++ b/nuttx/configs/hymini-stm32v/usbstorage/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/hymini-stm32v/usbstorage/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -86,14 +86,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/hymini-stm32v/usbstorage/ld.script b/nuttx/configs/hymini-stm32v/usbstorage/ld.script deleted file mode 100755 index 7e92fec83..000000000 --- a/nuttx/configs/hymini-stm32v/usbstorage/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/usbstorage/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/hymini-stm32v/usbstorage/ld.script.dfu b/nuttx/configs/hymini-stm32v/usbstorage/ld.script.dfu deleted file mode 100755 index 7bb2997c2..000000000 --- a/nuttx/configs/hymini-stm32v/usbstorage/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/hymini-stm32v/usbstorage/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * Hy-Mini STM32v's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103VCT6 has 48Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs index 352c03174..674ad7692 100644 --- a/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/ftpc/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ftpc/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ftpc/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script b/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script deleted file mode 100755 index 59b80c9bd..000000000 --- a/nuttx/configs/olimex-lpc1766stk/ftpc/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/ftpc/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs b/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs index 017a79e7d..3c68d370d 100644 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/hidkbd/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hidkbd/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hidkbd/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/ld.script b/nuttx/configs/olimex-lpc1766stk/hidkbd/ld.script deleted file mode 100755 index c6c97d402..000000000 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/hidkbd/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs b/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs index 652899c08..57f2b7a55 100644 --- a/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/nettest/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/ld.script b/nuttx/configs/olimex-lpc1766stk/nettest/ld.script deleted file mode 100755 index cc05746ba..000000000 --- a/nuttx/configs/olimex-lpc1766stk/nettest/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/nettest/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs b/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs index b517fae43..c9ecf51db 100644 --- a/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/nsh/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/nx/Make.defs b/nuttx/configs/olimex-lpc1766stk/nx/Make.defs index 2d0d63b19..64c981492 100644 --- a/nuttx/configs/olimex-lpc1766stk/nx/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nx/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/nx/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/nx/ld.script b/nuttx/configs/olimex-lpc1766stk/nx/ld.script deleted file mode 100755 index a4ad7e35b..000000000 --- a/nuttx/configs/olimex-lpc1766stk/nx/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/nx/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs b/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs index 6883694a3..2f33642bf 100644 --- a/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/ostest/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/ld.script b/nuttx/configs/olimex-lpc1766stk/ostest/ld.script deleted file mode 100755 index 323f1ec1d..000000000 --- a/nuttx/configs/olimex-lpc1766stk/ostest/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/ostest/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/ld.script b/nuttx/configs/olimex-lpc1766stk/scripts/ld.script index 5f6adbecd..76da77689 100755 --- a/nuttx/configs/olimex-lpc1766stk/nsh/ld.script +++ b/nuttx/configs/olimex-lpc1766stk/scripts/ld.script @@ -1,7 +1,7 @@ /**************************************************************************** - * configs/olimex-lpc1766stk/nsh/ld.script + * configs/olimex-lpc1766stk/scripts/ld.script * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -66,7 +66,7 @@ SECTIONS _etext = ABSOLUTE(.); } > flash - _eronly = ABSOLUTE(.); /* See below */ + _eronly = ABSOLUTE(.); .data : { _sdata = ABSOLUTE(.); @@ -86,14 +86,16 @@ SECTIONS } >sram __exidx_end = ABSOLUTE(.); - .bss : { /* BSS */ + .bss : { _sbss = ABSOLUTE(.); *(.bss .bss.*) *(.gnu.linkonce.b.*) *(COMMON) _ebss = ABSOLUTE(.); } > sram - /* Stabs debugging sections. */ + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs b/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs index 984d4e187..fc49b6981 100644 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/slip-httpd/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/slip-httpd/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/slip-httpd/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/ld.script b/nuttx/configs/olimex-lpc1766stk/slip-httpd/ld.script deleted file mode 100755 index 43d2662c8..000000000 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/slip-httpd/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs b/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs index 39e5ed299..bb4df618b 100644 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/thttpd/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/thttpd/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/ld.script b/nuttx/configs/olimex-lpc1766stk/thttpd/ld.script deleted file mode 100755 index 9225b8da6..000000000 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/thttpd/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs b/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs index 1cedb01d7..b4716971d 100644 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/usbserial/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/ld.script b/nuttx/configs/olimex-lpc1766stk/usbserial/ld.script deleted file mode 100755 index 26e03a20e..000000000 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/usbserial/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs b/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs index f879340f1..ed338c8b2 100644 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/usbstorage/Make.defs # -# Copyright (C) 2010 Gregory Nutt. All rights reserved. +# Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/ld.script b/nuttx/configs/olimex-lpc1766stk/usbstorage/ld.script deleted file mode 100755 index 8c81ff85a..000000000 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/usbstorage/ld.script - * - * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs b/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs index a316a0e6a..08f55feab 100644 --- a/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/olimex-lpc1766stk/wlan/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -74,14 +74,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/wlan/ld.script}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/wlan/ld.script + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/ld.script b/nuttx/configs/olimex-lpc1766stk/wlan/ld.script deleted file mode 100755 index 82fc20a44..000000000 --- a/nuttx/configs/olimex-lpc1766stk/wlan/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/olimex-lpc1766stk/wlan/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1766 has 256Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/dhcpd/Make.defs b/nuttx/configs/stm3220g-eval/dhcpd/Make.defs index e8bb28c76..e5a0e7b06 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/Make.defs +++ b/nuttx/configs/stm3220g-eval/dhcpd/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/nettest/Make.defs b/nuttx/configs/stm3220g-eval/nettest/Make.defs index 2c6b8a1f4..2a8976d08 100644 --- a/nuttx/configs/stm3220g-eval/nettest/Make.defs +++ b/nuttx/configs/stm3220g-eval/nettest/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/nettest/ld.script b/nuttx/configs/stm3220g-eval/nettest/ld.script deleted file mode 100644 index 893ae1d66..000000000 --- a/nuttx/configs/stm3220g-eval/nettest/ld.script +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/nettest/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and - * 128Kb of SRAM. SRAM is split up into two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/nsh/Make.defs b/nuttx/configs/stm3220g-eval/nsh/Make.defs index 834db56bc..23a57ab80 100644 --- a/nuttx/configs/stm3220g-eval/nsh/Make.defs +++ b/nuttx/configs/stm3220g-eval/nsh/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/nsh/ld.script b/nuttx/configs/stm3220g-eval/nsh/ld.script deleted file mode 100644 index dfa2b3ccd..000000000 --- a/nuttx/configs/stm3220g-eval/nsh/ld.script +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/nsh/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and - * 128Kb of SRAM. SRAM is split up into two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/nsh2/Make.defs b/nuttx/configs/stm3220g-eval/nsh2/Make.defs index f29c47214..38335c170 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/Make.defs +++ b/nuttx/configs/stm3220g-eval/nsh2/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/nsh2/ld.script b/nuttx/configs/stm3220g-eval/nsh2/ld.script deleted file mode 100644 index e03a33dcb..000000000 --- a/nuttx/configs/stm3220g-eval/nsh2/ld.script +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/nsh2/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and - * 128Kb of SRAM. SRAM is split up into two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/nxwm/Make.defs b/nuttx/configs/stm3220g-eval/nxwm/Make.defs index 4b770ba64..c4846c0c3 100644 --- a/nuttx/configs/stm3220g-eval/nxwm/Make.defs +++ b/nuttx/configs/stm3220g-eval/nxwm/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxwm/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxwm/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/nxwm/ld.script b/nuttx/configs/stm3220g-eval/nxwm/ld.script deleted file mode 100644 index 409ecc3af..000000000 --- a/nuttx/configs/stm3220g-eval/nxwm/ld.script +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/nxwm/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and - * 128Kb of SRAM. SRAM is split up into two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/ostest/Make.defs b/nuttx/configs/stm3220g-eval/ostest/Make.defs index a67036f78..e2de89cf7 100644 --- a/nuttx/configs/stm3220g-eval/ostest/Make.defs +++ b/nuttx/configs/stm3220g-eval/ostest/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/ostest/ld.script b/nuttx/configs/stm3220g-eval/ostest/ld.script deleted file mode 100644 index 17428ea85..000000000 --- a/nuttx/configs/stm3220g-eval/ostest/ld.script +++ /dev/null @@ -1,120 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/ostest/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/stm3220g-eval/dhcpd/ld.script b/nuttx/configs/stm3220g-eval/scripts/ld.script index a264f2442..1c9f12bba 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/ld.script +++ b/nuttx/configs/stm3220g-eval/scripts/ld.script @@ -1,5 +1,5 @@ /**************************************************************************** - * configs/stm3220g-eval/dhcpd/ld.script + * configs/stm3220g-eval/scripts/ld.script * * Copyright (C) 2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> diff --git a/nuttx/configs/stm3220g-eval/telnetd/Make.defs b/nuttx/configs/stm3220g-eval/telnetd/Make.defs index 4a6927906..4004508d5 100644 --- a/nuttx/configs/stm3220g-eval/telnetd/Make.defs +++ b/nuttx/configs/stm3220g-eval/telnetd/Make.defs @@ -110,14 +110,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/nuttx/configs/stm3220g-eval/telnetd/ld.script b/nuttx/configs/stm3220g-eval/telnetd/ld.script deleted file mode 100644 index f4ecb084a..000000000 --- a/nuttx/configs/stm3220g-eval/telnetd/ld.script +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * configs/stm3220g-eval/telnetd/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and - * 128Kb of SRAM. SRAM is split up into two blocks: - * - * 1) 112Kb of SRAM beginning at address 0x2000:0000 - * 2) 16Kb of SRAM beginning at address 0x2001:c000 - * - * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 - * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - .init_section : { - _sinit = ABSOLUTE(.); - *(.init_array .init_array.*) - _einit = ABSOLUTE(.); - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} |