diff options
Diffstat (limited to 'misc/Obsoleted/configs/16z/nsh/Make.defs')
| -rw-r--r-- | misc/Obsoleted/configs/16z/nsh/Make.defs | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/misc/Obsoleted/configs/16z/nsh/Make.defs b/misc/Obsoleted/configs/16z/nsh/Make.defs new file mode 100644 index 000000000..8405f00a8 --- /dev/null +++ b/misc/Obsoleted/configs/16z/nsh/Make.defs @@ -0,0 +1,264 @@ +############################################################################ +# configs/16z/nsh/Make.defs +# +# Copyright (C) 2014 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include $(TOPDIR)/.config +include $(TOPDIR)/tools/Config.mk + +# These are the directories where the ZDS-II toolchain is installed. NOTE +# that short 8.3 path names are used in order to avoid spaces. On my machine +# I have: +# +# C:\PROGRA~1\ = C:\Profram Files\ +# C:\PROGRA~2\ = C:\Program Files (x86)\ +# +# Your PC may be configured differently. + +ZDSVERSION = 5.0.1 + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_ZNEO_$(ZDSVERSION) + INSTALLDIR = ${shell echo $(ZDSINSTALLDIR)| sed -e "s/\//\\/g"} + ZDSBINDIR = $(INSTALLDIR)\bin + ZDSSTDINCDIR = $(INSTALLDIR)\include\std + ZDSZILOGINCDIR = $(INSTALLDIR)\include\zilog + ZDSSTDLIBDIR = $(INSTALLDIR)\lib\std + ZDSZILOGLIBDIR = $(INSTALLDIR)\lib\zilog + + # CFLAGs + + ARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR) + EARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR) + ARCHSTDINCLUDES = -stdinc:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR) + ARCHUSRINCLUDES = -usrinc:. +else + WINTOOL = y + ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_ZNEO_$(ZDSVERSION) + INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"} + ZDSBINDIR = $(INSTALLDIR)/bin + ZDSSTDINCDIR = $(INSTALLDIR)/include/std + ZDSZILOGINCDIR = $(INSTALLDIR)/include/zilog + ZDSSTDLIBDIR = $(INSTALLDIR)/lib/std + ZDSZILOGLIBDIR = $(INSTALLDIR)/lib/zilog + + # These are the same directories but with the directory separator + # character swapped as needed by the ZDS-II compiler + + WTOPDIR = ${shell cygpath -w "$(TOPDIR)"} + WZDSSTDINCDIR = ${shell cygpath -w "$(ZDSSTDINCDIR)"} + WZDSZILOGINCDIR = ${shell cygpath -w "$(ZDSZILOGINCDIR)"} + WZDSSTDLIBDIR = ${shell cygpath -w "$(ZDSSTDLIBDIR)"} + WZDSZILOGLIBDIR = ${shell cygpath -w "$(ZDSZILOGLIBDIR)"} + + # Escaped versions + + ETOPDIR = ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"} + EZDSSTDINCDIR = ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"} + EZDSZILOGINCDIR = ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"} + + # CFLAGs + + ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' + EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)' + ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' + ARCHUSRINCLUDES = -usrinc:'.' +endif + +# Assembler definitions + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHASMOPTIMIZATION = -debug +else + ARCHASMOPTIMIZATION = -nodebug +endif + +ARCHASMCPUFLAGS = -cpu:Z16F2811AL -NOigcase +ARCHASMLIST = -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet +ARCHASMWARNINGS = -warn +ARCHASMDEFINES = -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 -define:__ASSEMBLY__ +AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION) + +# Compiler definitions + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -debug +else + ARCHOPTIMIZATION = -nodebug +endif + +ifeq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += -NOregvar -reduceopt +else + ARCHOPTIMIZATION += -regvar +endif + +ARCHCPUFLAGS = -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL -NOgenprint \ + -asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)" +ARCHLIST = -keeplst -NOlist -NOlistinc -NOkeepasm +ARCHPICFLAGS = +ARCHWARNINGS = -warn +ARCHDEFINES = -define:_Z16F2811AL -define:_Z16K_SERIES -define:_Z16F_SERIES +ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES) +CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) + +CPPDEFINES = -D_Z16F2811AL -D_Z16K_SERIES -D_Z16F_SERIES -D__ASSEMBLY__ +CPPINCLUDES = -I$(TOPDIR)$(DELIM)include +CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES) + +# Librarian definitions + +ARFLAGS = -quiet -warn + +# Linker definitions + +LINKCMDTEMPLATE = $(TOPDIR)$(DELIM)configs$(DELIM)16z$(DELIM)nsh$(DELIM)nsh.linkcmd + +# Tool names/pathes + +CROSSDEV = +CC = zneocc.exe +CPP = gcc -E +LD = zneolink.exe +AS = zneoasm.exe +AR = zneolib.exe + +# File extensions + +ASMEXT = .asm +OBJEXT = .obj +LIBEXT = .lib +EXEEXT = .hex + +# These are the macros that will be used in the NuttX make system +# to compile and assembly source files and to insert the resulting +# object files into an archive + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + +define PREPROCESS + @echo CPP: $1->$2 + $(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + $(Q) "$(CC)" $(CFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"} +endef + +define ASSEMBLE + $(Q) "$(AS)" $(AFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"} +endef + +define MOVEOBJ + $(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj") + $(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst") + @#$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src") +endef + +define ARCHIVE + @echo AR: $2 + $(Q) for %%G in ($(2)) do ( "$(AR)" $(ARFLAGS) $1=-+%%G ) +endef + +define CLEAN + $(Q) if exist *.obj (del /f /q *.obj) + $(Q) if exist *.src (del /f /q *.src) + $(Q) if exist *.lib (del /f /q *.lib) + $(Q) if exist *.hex (del /f /q *.hex) + $(Q) if exist *.lod (del /f /q *.lod) + $(Q) if exist *.lst (del /f /q *.lst) +endef + +else + +define PREPROCESS + @echo "CPP: $1->$2" + $(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + $(Q) (wfile=`cygpath -w "$1"`; "$(CC)" $(CFLAGS) $$wfile) +endef + +define ASSEMBLE + $(Q) (wfile=`cygpath -w "$1"`; "$(AS)" $(AFLAGS) $$wfile) +endef + +define MOVEOBJ + $(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj") + $(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst") + @#$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src") +endef + +define ARCHIVE + $(Q) for __obj in $(2) ; do \ + echo "AR: $$__obj"; \ + "$(AR)" $(ARFLAGS) $1=-+$$__obj || { echo "$(AR) $1=-+$$__obj FAILED!" ; exit 1 ; } \ + done +endef + +define CLEAN + $(Q) rm -f *.obj *.src *.lib *.hex *.lod *.lst +endef +endif + +# Windows native host tool definitions + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + HOSTCC = mingw32-gcc.exe + HOSTINCLUDES = -I. + HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe + HOSTLDFLAGS = + HOSTEXEEXT = .exe + + # Windows-native host tools + + MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative +else + +# Linux/Cygwin host tool definitions + + HOSTCC = gcc + HOSTINCLUDES = -I. + HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe + HOSTLDFLAGS = + + # This is the tool to use for dependencies (i.e., none) + + MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh + + # ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies + + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh + DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh +endif |