diff options
Diffstat (limited to 'misc/Obsoleted/configs/stm32f100rc_generic')
13 files changed, 2089 insertions, 0 deletions
diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig b/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig new file mode 100644 index 000000000..c5af1e0a4 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/Kconfig @@ -0,0 +1,59 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +if ARCH_BOARD_STM32F100RC_GENERIC +comment "STM32F100RC Generic Hardware Configuration" + +config PM_BUTTONS + bool "PM Button support" + default n + depends on PM && ARCH_IRQBUTTONS + ---help--- + Enable PM button EXTI interrupts to support PM testing + +config PM_BUTTON_ACTIVITY + int "Button PM activity weight" + default 10 + depends on PM_BUTTONS + ---help--- + The activity weight to report to the power management subsystem when a button is pressed. + +config PM_ALARM_SEC + int "PM_STANDBY delay (seconds)" + default 15 + depends on PM && RTC_ALARM + ---help--- + Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode. + +config PM_ALARM_NSEC + int "PM_STANDBY delay (nanoseconds)" + default 0 + depends on PM && RTC_ALARM + ---help--- + Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode. + +config PM_SLEEP_WAKEUP + bool "PM_SLEEP wake-up alarm" + default n + depends on PM && RTC_ALARM + ---help--- + Wake-up of PM_SLEEP mode after a delay and resume normal operation. + +config PM_SLEEP_WAKEUP_SEC + int "PM_SLEEP delay (seconds)" + default 10 + depends on PM && RTC_ALARM + ---help--- + Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode. + +config PM_SLEEP_WAKEUP_NSEC + int "PM_SLEEP delay (nanoseconds)" + default 0 + depends on PM && RTC_ALARM + ---help--- + Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode. + +endif + diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/README.txt b/misc/Obsoleted/configs/stm32f100rc_generic/README.txt new file mode 100644 index 000000000..e77976038 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/README.txt @@ -0,0 +1,469 @@ +README +====== + +This README discusses issues unique to NuttX configurations for the STMicro +STM32F100RC generic board. This "generic" configuration is not very usable +out-of-box, but can be used as a starting point to creating new configs with +similar STM32 high-density value line chips. As a bare-minimum this config only +specifies one LED (on PA0) and one button (on PA1), you should change that to +match your hardware (some details below and in source files). + +Contents +======== + + - Development Environment + - GNU Toolchain Options + - IDEs + - NuttX EABI "buildroot" Toolchain + - NuttX OABI "buildroot" Toolchain + - NXFLAT Toolchain + - LEDs + - UARTs + - "STMicro STM32F100RC generic" specific Configuration Options + - Configurations + +Development Environment +======================= + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. + +GNU Toolchain Options +===================== + + Toolchain Configurations + ------------------------ + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The Atollic Toolchain, + 3. The devkitARM GNU toolchain, + 4. Raisonance GNU toolchain, or + 5. The NuttX buildroot Toolchain (see below). + + All testing has been conducted using the CodeSourcery toolchain for Windows. To use + the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to + add one of the following configuration options to your .config (or defconfig) + file: + + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y : The Atollic toolchain under Windows + CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y : devkitARM under Windows + CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y : Raisonance RIDE7 under Windows + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + + If you change the default toolchain, then you may also have to modify the PATH in + the setenv.sh file if your make cannot find the tools. + + NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are + Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot + toolchains are Cygwin and/or Linux native toolchains. There are several limitations + to using a Windows based toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had no effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + The CodeSourcery Toolchain (2009q1) + ----------------------------------- + The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + The Atollic "Pro" and "Lite" Toolchain + -------------------------------------- + One problem that I had with the Atollic toolchains is that the provide a gcc.exe + and g++.exe in the same bin/ file as their ARM binaries. If the Atollic bin/ path + appears in your PATH variable before /usr/bin, then you will get the wrong gcc + when you try to build host executables. This will cause to strange, uninterpretable + errors build some host binaries in tools/ when you first make. + + The Atollic "Lite" Toolchain + ---------------------------- + The free, "Lite" version of the Atollic toolchain does not support C++ nor + does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite" + toolchain, you will have to set: + + CONFIG_HAVE_CXX=n + + In order to compile successfully. Otherwise, you will get errors like: + + "C++ Compiler only available in TrueSTUDIO Professional" + + The make may then fail in some of the post link processing because of some of + the other missing tools. The Make.defs file replaces the ar and nm with + the default system x86 tool versions and these seem to work okay. Disable all + of the following to avoid using objcopy: + + CONFIG_RRLOAD_BINARY=n + CONFIG_INTELHEX_BINARY=n + CONFIG_MOTOROLA_SREC=n + CONFIG_RAW_BINARY=n + + devkitARM + --------- + The devkitARM toolchain includes a version of MSYS make. Make sure that the + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + +IDEs +==== + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project. + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/stm32, + arch/arm/src/common, arch/arm/src/armv7-m, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX + one time from the Cygwin command line in order to obtain the pre-built + startup object needed by RIDE. + +NuttX EABI "buildroot" Toolchain +================================ + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh stm32f100rc_generic/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + details PLUS some special instructions that you will need to follow if you are + building a Cortex-M3 toolchain for Cygwin under Windows. + + NOTE: Unfortunately, the 4.6.3 EABI toolchain is not compatible with the + the NXFLAT tools. See the top-level TODO file (under "Binary loaders") for + more information about this problem. If you plan to use NXFLAT, please do not + use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain. + See instructions below. + +NuttX OABI "buildroot" Toolchain +================================ + + The older, OABI buildroot toolchain is also available. To use the OABI + toolchain: + + 1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3 + configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI + configuration such as cortexm3-defconfig-4.3.3 + + 2. Modify the Make.defs file to use the OABI conventions: + + +CROSSDEV = arm-nuttx-elf- + +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft + +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections + -CROSSDEV = arm-nuttx-eabi- + -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft + -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections + +NXFLAT Toolchain +================ + + If you are *not* using the NuttX buildroot toolchain and you want to use + the NXFLAT tools, then you will still have to build a portion of the buildroot + tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can + be downloaded from the NuttX SourceForge download site + (https://sourceforge.net/projects/nuttx/files/). + + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh lpcxpresso-lpc1768/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-defconfig-nxflat .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly builtNXFLAT binaries. + +LEDs +==== + +It is asumed that STMicro STM32F100RC generic board board has one LED on PA0. +You should configure the port and pin number in +configs/stm32f100rc_generic/src/stm32f100rc_internal.h. This LED is not used by +the board port unless CONFIG_ARCH_LEDS is defined. In that case, the usage by +the board port is defined in include/board.h and src/up_leds.c. The LED is used +to encode OS-related events as follows: + + SYMBOL Meaning LED1* + green + ------------------- ----------------------- ------- + LED_STARTED NuttX has been started ON + LED_HEAPALLOCATE Heap has been allocated ON + LED_IRQSENABLED Interrupts enabled ON + LED_STACKCREATED Idle stack created ON + LED_INIRQ In an interrupt ON + LED_SIGNAL In a signal handler ON + LED_ASSERTION An assertion failed OFF + LED_PANIC The system has crashed OFF + +So basically if the LED is off it means that there is a problem. + +UART +==== + +Default USART/UART Configuration +-------------------------------- + +USART2 is enabled in all configurations (see */defconfig). RX and TX are +configured on pins PA3 and PA2, respectively. + +"STMicro STM32F100RC generic" specific Configuration Options +============================================================ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_CORTEXM3=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=stm32 + + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: + + CONFIG_ARCH_CHIP_STM32F100RC=y + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock + configuration features. + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=stm32f100rc_generic + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_STM32F100RC_GENERIC=y + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_RAM_SIZE - Describes the installed DRAM (SRAM in this case): + + CONFIG_RAM_SIZE=24576 (24kB) + + CONFIG_RAM_START - The start address of installed DRAM + + CONFIG_RAM_START=0x20000000 + + CONFIG_ARCH_LEDS - Use LED to show state. Unique to boards that have LED(s) + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_CALIBRATION - when used togeter with CONFIG_DEBUG enables some + build in instrumentation that cause a 100 second delay during boot-up. + This 100 second delay serves no purpose other than it allows you to + calibratre CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to + measure the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + + Individual subsystems can be enabled: + + AHB + ---- + CONFIG_STM32_CRC + CONFIG_STM32_DMA1 + CONFIG_STM32_DMA2 + + APB1 + ---- + CONFIG_STM32_TIM2 + CONFIG_STM32_TIM3 + CONFIG_STM32_TIM4 + CONFIG_STM32_TIM5 + CONFIG_STM32_TIM6 + CONFIG_STM32_TIM7 + CONFIG_STM32_TIM12 + CONFIG_STM32_TIM13 + CONFIG_STM32_TIM14 + CONFIG_STM32_RTC + CONFIG_STM32_WWDG + CONFIG_STM32_IWDG + CONFIG_STM32_SPI2 + CONFIG_STM32_SPI3 + CONFIG_STM32_USART2 + CONFIG_STM32_USART3 + CONFIG_STM32_UART4 + CONFIG_STM32_UART5 + CONFIG_STM32_I2C1 + CONFIG_STM32_I2C2 + CONFIG_STM32_PWR -- Required for RTC + CONFIG_STM32_BKP -- Required for RTC + CONFIG_STM32_DAC1 + CONFIG_STM32_DAC2 + CONFIG_STM32_CEC + + APB2 + ---- + CONFIG_STM32_ADC1 + CONFIG_STM32_TIM1 + CONFIG_STM32_SPI1 + CONFIG_STM32_USART1 + CONFIG_STM32_TIM15 + CONFIG_STM32_TIM16 + CONFIG_STM32_TIM17 + + Timer devices may be used for different purposes. One special purpose is + to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn + is defined (as above) then the following may also be defined to indicate that + the timer is intended to be used for pulsed output modulation, ADC conversion, + or DAC conversion. Note that ADC/DAC require two definition: Not only do you have + to assign the timer (n) for used by the ADC or DAC, but then you also have to + configure which ADC or DAC (m) it is assigned to. + + CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,17 + CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,17 + CONFIG_STM32_TIMn_ADC1 Reserve timer n to trigger ADCm, n=1,..,17 + CONFIG_STM32_TIMn_DAC Reserve timer n for use by DAC, n=1,..,17 + CONFIG_STM32_TIMn_DACm Reserve timer n to trigger DACm, n=1,..,17, m=1,..,2 + + For each timer that is enabled for PWM usage, we need the following additional + configuration settings: + + CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} + + NOTE: The STM32 timers are each capable of generating different signals on + each of the four channels with different duty cycles. That capability is + not supported by this driver: Only one output channel per timer. + + JTAG Enable settings (by default full SWJ is enabled): + + CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + but without JNTRST. + CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled + + STMicro STM32F100RC generic specific device driver settings + + CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART + m (m=4,5) for the console and ttys0 (default is the USART1). + CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_U[S]ARTn_2STOP - Two stop bits + +Configurations +============== + +Each STMicro STM32F100RC generic configuration is maintained in a sub-directory +and can be selected as follow: + + cd tools + ./configure.sh stm32f100rc_generic/<subdir> + cd - + . ./setenv.sh + +Where <subdir> is one of the following: + + nsh: + --- + Configures the NuttShell (nsh) located at apps/examples/nsh. The + Configuration enables only the serial NSH interfaces. + + Default toolchain: + + CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h b/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h new file mode 100644 index 000000000..59c4b31cc --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/include/board.h @@ -0,0 +1,192 @@ +/************************************************************************************ + * configs/stm32f100rc_generic/include/board.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_H +#define __ARCH_BOARD_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif +#include "stm32_rcc.h" +#include "stm32.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ + +/* On-board crystal frequency is 8MHz (HSE) */ + +#define STM32_BOARD_XTAL 8000000ul + +/* PLL source is HSE / 1, PLL multiplier is 3: PLL output frequency is 8MHz (XTAL) x 3 = 24MHz */ + +#define STM32_CFGR2_PREDIV1 RCC_CFGR2_PREDIV1d1 +#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC +#define STM32_CFGR_PLLXTPRE 0 +#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx3 +#define STM32_PLL_FREQUENCY (3 * STM32_BOARD_XTAL) + +/* Use the PLL and set the SYSCLK source to be the PLL */ + +#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL +#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL +#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY + +/* AHB clock (HCLK) is SYSCLK (24MHz) */ + +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK +#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY + +/* APB2 clock (PCLK2) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK +#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY + +/* APB2 timers (1, 15-17) will receive PCLK2. */ + +#define STM32_APB2_TIM1_CLKIN STM32_PCLK2_FREQUENCY +#define STM32_APB2_TIM15_CLKIN STM32_PCLK2_FREQUENCY +#define STM32_APB2_TIM16_CLKIN STM32_PCLK2_FREQUENCY +#define STM32_APB2_TIM17_CLKIN STM32_PCLK2_FREQUENCY + +/* APB1 clock (PCLK1) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK +#define STM32_PCLK1_FREQUENCY STM32_HCLK_FREQUENCY + +/* APB1 timers (2-7, 12-14) will receive PCLK1. */ + +#define STM32_APB1_TIM2_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM3_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM4_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM5_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM6_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM7_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM12_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM13_CLKIN STM32_PCLK1_FREQUENCY +#define STM32_APB1_TIM14_CLKIN STM32_PCLK1_FREQUENCY + +/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx + * otherwise frequency is 2xAPBx. + * Note: TIM1,15-17 are on APB2, others on APB1 */ + +#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY +#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY + +/* LED definitions ******************************************************************/ + +/* It is assumed that a generic board has 1 LED. Thus only two different states + * can be shown. Statuses defined as "1" will light the LED, the ones defined as + * "0" will turn the LED off. */ + +#define LED_STARTED 1 +#define LED_HEAPALLOCATE 1 +#define LED_IRQSENABLED 1 +#define LED_STACKCREATED 1 +#define LED_INIRQ 1 +#define LED_SIGNAL 1 +#define LED_ASSERTION 0 +#define LED_PANIC 0 + +/* Button definitions ***************************************************************/ + +/* It is assumed that a generic board has 1 button. */ + +#define BUTTON_0 0 + +#define NUM_BUTTONS 1 + +#define BUTTON_0_BIT (1 << BUTTON_0) + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +EXTERN void stm32_boardinitialize(void); + +/************************************************************************************ + * Name: stm32_ledinit, stm32_setled, and stm32_setleds + * + * Description: + * If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If + * CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to + * control the LEDs from user applications. + * + ************************************************************************************/ + +#ifndef CONFIG_ARCH_LEDS +EXTERN void stm32_ledinit(void); +EXTERN void stm32_setled(int led, bool ledon); +EXTERN void stm32_setleds(uint8_t ledset); +#endif + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs new file mode 100644 index 000000000..751ebccea --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/Make.defs @@ -0,0 +1,112 @@ +############################################################################ +# configs/stm32f100rc_generic/nsh/Make.defs +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# Freddie Chopin <freddie_chopin@op.pl> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS = -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS = -g +endif + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig new file mode 100644 index 000000000..b1f0b2d82 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/defconfig @@ -0,0 +1,627 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_DEFAULT_SMALL=y + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_LM3S is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_HAVE_CMNVECTOR=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +CONFIG_ARMV7M_CMNVECTOR=y +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_BOARD_LOOPSPERMSEC=2398 +# CONFIG_ARCH_CALIBRATION is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +CONFIG_ARCH_CHIP_STM32F100RC=y +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set +# CONFIG_ARCH_CHIP_STM32F103VC is not set +# CONFIG_ARCH_CHIP_STM32F103VE is not set +# CONFIG_ARCH_CHIP_STM32F103ZE is not set +# CONFIG_ARCH_CHIP_STM32F105VB is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +CONFIG_STM32_STM32F10XX=y +CONFIG_STM32_VALUELINE=y +CONFIG_STM32_HIGHDENSITY=y +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +# CONFIG_STM32_ADC1 is not set +CONFIG_STM32_BKP=y +# CONFIG_STM32_CEC is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_IWDG is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_SPI1 is not set +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_TIM15 is not set +# CONFIG_STM32_TIM16 is not set +# CONFIG_STM32_TIM17 is not set +# CONFIG_STM32_USART1 is not set +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_WWDG is not set + +# +# Alternate Pin Mapping +# +# CONFIG_STM32_USART2_REMAP is not set +# CONFIG_STM32_JTAG_DISABLE is not set +CONFIG_STM32_JTAG_FULL_ENABLE=y +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +# CONFIG_STM32_JTAG_SW_ENABLE is not set +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set + +# +# USB Host Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_STACKDUMP=y + +# +# Board Settings +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=24576 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_STM32F100RC_GENERIC=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32f100rc_generic" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# STM32F100RC Generic Hardware Configuration +# + +# +# RTOS Features +# +CONFIG_USEC_PER_TICK=10000 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2012 +CONFIG_START_MONTH=11 +CONFIG_START_DAY=1 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORKPRIORITY=192 +CONFIG_SCHED_HPWORKPERIOD=50000 +CONFIG_SCHED_HPWORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=17 +# CONFIG_SCHED_LPWORK is not set +CONFIG_SCHED_WAITPID=y +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_ENVIRON is not set +CONFIG_DISABLE_POLL=y + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_WDOG_INTRESERVE=0 +CONFIG_PREALLOC_TIMERS=4 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_SPI is not set +CONFIG_RTC=y +# CONFIG_RTC_DATETIME is not set +# CONFIG_RTC_HIRES is not set +# CONFIG_RTC_ALARM is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_USART2=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_USART2_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART2 Configuration +# +CONFIG_USART2_RXBUFSIZE=128 +CONFIG_USART2_TXBUFSIZE=128 +CONFIG_USART2_BAUD=115200 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +CONFIG_SYMTAB_ORDEREDBYNAME=y + +# +# Library Routines +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Basic CXX Support +# +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Named Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_SYSTEM_CDCACM is not set +# CONFIG_SYSTEM_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_SYSTEM_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WLAN is not set + +# +# Interpreters +# + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_DNSCLIENT is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_NETLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh new file mode 100755 index 000000000..0e3810cbb --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/nsh/setenv.sh @@ -0,0 +1,76 @@ +#!/bin/bash +# configs/stm32f100rc_generic/nsh/setenv.sh +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# Freddie Chopin <freddie_chopin@op.pl> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script b/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script new file mode 100644 index 000000000..f9fde02ac --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/scripts/ld.script @@ -0,0 +1,118 @@ +/**************************************************************************** + * configs/stm32f100rc_generic/scripts/ld.script + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F100RC has 256kB of FLASH beginning at address 0x08000000 and 24kB + * of SRAM beginning at address 0x20000000. When booting from FLASH, FLASH + * memory is aliased to address 0x00000000 where the code expects to begin + * execution by jumping to the entry point in the 0x08000000 address range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 24K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore b/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore new file mode 100644 index 000000000..726d936e1 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/.gitignore @@ -0,0 +1,2 @@ +/.depend +/Make.dep diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile b/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile new file mode 100644 index 000000000..8cd8a2af4 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/Makefile @@ -0,0 +1,82 @@ +############################################################################ +# configs/stm32f100rc_generic/src/Makefile +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# Freddie Chopin <freddie_chopin@op.pl> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = up_boot.c up_leds.c up_buttons.c +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h b/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h new file mode 100644 index 000000000..2d4b282c0 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/stm32f100rc_internal.h @@ -0,0 +1,57 @@ +/************************************************************************************ + * configs/stm32f100rc_generic/src/stm32f100rc_internal.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H +#define __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* LED - assume it is on PA0 */ + +#define GPIO_LED1 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz | GPIO_OUTPUT_CLEAR | GPIO_PORTA | GPIO_PIN0) + +/* BUTTON - assume it is on PA1 */ + +#define MIN_IRQBUTTON BUTTON_0 +#define MAX_IRQBUTTON BUTTON_0 +#define NUM_IRQBUTTONS 1 + +#define GPIO_BTN_0 (GPIO_INPUT | GPIO_CNF_INFLOAT | GPIO_MODE_INPUT | GPIO_PORTA | GPIO_PIN1) + +#endif /* __CONFIGS_STM32F100RC_GENERIC_SRC_STM32F100RC_INTERNAL_H */ + diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c new file mode 100644 index 000000000..ca9f89d68 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_boot.c @@ -0,0 +1,70 @@ +/************************************************************************************ + * configs/stm32f100rc_generic/src/up_boot.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <debug.h> + +#include <arch/board/board.h> + +#include "up_arch.h" +#include "stm32f100rc_internal.h" + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void) +{ + /* Configure on-board LEDs if LED support has been selected. */ +#ifdef CONFIG_ARCH_LEDS + board_led_initialize(); +#endif +} diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c new file mode 100644 index 000000000..b05b7a1d5 --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_buttons.c @@ -0,0 +1,119 @@ +/**************************************************************************** + * configs/stm32f100rc_generic/src/board_buttons.c + * + * Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> + +#include <nuttx/arch.h> +#include <arch/board/board.h> + +#include "stm32f100rc_internal.h" + +#ifdef CONFIG_ARCH_BUTTONS + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_button_initialize + * + * Description: + * board_button_initialize() must be called to initialize button resources. After + * that, board_buttons() may be called to collect the current state of all + * buttons or board_button_irq() may be called to register button interrupt + * handlers. + * + ****************************************************************************/ + +void board_button_initialize(void) +{ + stm32_configgpio(GPIO_BTN_0); /* Configure the GPIO pins as inputs. */ +} + +/**************************************************************************** + * Name: board_buttons + ****************************************************************************/ + +uint8_t board_buttons(void) +{ + uint8_t ret = 0; + + ret = (stm32_gpioread(g_buttons[i]) == false ? 1 : 0); + + return ret; +} + +/************************************************************************************ + * Button support. + * + * Description: + * board_button_initialize() must be called to initialize button resources. After + * that, board_buttons() may be called to collect the current state of all + * buttons or board_button_irq() may be called to register button interrupt + * handlers. + * + * After board_button_initialize() has been called, board_buttons() may be called to + * collect the state of all buttons. board_buttons() returns an 8-bit bit set + * with each bit associated with a button. See the BUTTON_*_BIT and JOYSTICK_*_BIT + * definitions in board.h for the meaning of each bit. + * + * board_button_irq() may be called to register an interrupt handler that will + * be called when a button is depressed or released. The ID value is a + * button enumeration value that uniquely identifies a button resource. See the + * BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration + * value. The previous interrupt handler address is returned (so that it may + * restored, if so desired). + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_IRQBUTTONS +xcpt_t board_button_irq(int id, xcpt_t irqhandler) +{ + xcpt_t oldhandler = NULL; + + if (id == 0) + oldhandler = stm32_gpiosetevent(GPIO_BTN_0, true, true, true, irqhandler); + + return oldhandler; +} +#endif +#endif /* CONFIG_ARCH_BUTTONS */ diff --git a/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c new file mode 100644 index 000000000..ea453d15a --- /dev/null +++ b/misc/Obsoleted/configs/stm32f100rc_generic/src/up_leds.c @@ -0,0 +1,106 @@ +/**************************************************************************** + * configs/stm32f100rc_generic/src/up_leds.c + * + * Copyright (C) 2012-2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Freddie Chopin <freddie_chopin@op.pl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdbool.h> +#include <debug.h> + +#include <arch/board/board.h> +#include <nuttx/power/pm.h> + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32.h" +#include "stm32f100rc_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG + * with CONFIG_DEBUG_VERBOSE too) + */ + +#ifdef CONFIG_DEBUG_LEDS +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_led_initialize + ****************************************************************************/ + +#ifdef CONFIG_ARCH_LEDS +void board_led_initialize(void) +{ + stm32_configgpio(GPIO_LED1); /* Configure LED1 GPIO for output */ +} + +/**************************************************************************** + * Name: board_led_on + ****************************************************************************/ + +void board_led_on(int led) +{ + if (led == 1) + stm32_gpiowrite(GPIO_LED1, true); +} + +/**************************************************************************** + * Name: board_led_off + ****************************************************************************/ + +void board_led_off(int led) +{ + if (led == 0) + stm32_gpiowrite(GPIO_LED1, false); +} + +#endif /* CONFIG_ARCH_LEDS */ |