diff options
Diffstat (limited to 'nuttx/ChangeLog')
| -rw-r--r-- | nuttx/ChangeLog | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 993719b11..7a6e3f6eb 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2280,7 +2280,7 @@ the particular condition that revealed the bug occurred. My impression is that this latter bugfix also fixes some STM32 USB performance problems. * configs/hymini-stm32v: A configuration for the HY-Mini STM32v board contributed - by Laurent Latil. Theses changes also include support for the STM32F103VCT6. + by Laurent Latil. These changes also include support for the STM32F103VCT6. * arch/configs/stm3240g-eval/src/up_pwm.c: Add hooks needed to use the new apps/examples/pwm test of the STM32 PWM driver. * drivers/mtd/mp25x.c: Add ability to use different SPI modes and different @@ -2977,7 +2977,7 @@ * configs/lpc4330-xplorer/nsh: Add an NSH configuration for the LPC4330 Xplorer board. -6.21 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> +6.21 2012-08-25 Gregory Nutt <gnutt@nuttx.org> * configs/lpc4330-xplorer/up_nsh.c: Add support for a basic SPIFI block driver for use by NSH. Does not work! Crashes on first SPIFI write. @@ -3024,7 +3024,7 @@ but the driver still does not work. * arch/arm/src/stm32 and arch/arm/include/stm32: Make name of RTC ALARM interrupt common on STM32 F1,2,4 - * arch/arm/src/stm32 and arch/arm/include/stm32: Add add support for the + * arch/arm/src/stm32 and arch/arm/include/stm32: Add support for the STM32F100x "Value Line" devices. This includes changes to stm32F10xx_rcc.c that add the ability to run the chip off the internal oscillator. There is no open board configuration for this part yet (the STM32VLDiscovery would be a candidate). @@ -3050,7 +3050,7 @@ * include/termios.h and lib/termios/*: Redesigned yet again (this is getting painful. NuttX now supports the BOTHER baud setting just as Linux does. termios Bxxx definitions are again encoded; cf[set|get][o|i]speed now deal with only the - encoded values. If the encode baud is set to BOTHER, then the values in the (non- + encoded values. If the encoded baud is set to BOTHER, then the values in the (non- standard) c_ispeed and c_ospeed baud values may be accessed directly. * arch/arm/src/stm32/stm32_serial.c: Add minimal termios support for the STM32 (BOTHER style baud settings only). Contributed by Mike Smith. @@ -3063,8 +3063,7 @@ * arch/arm/src/stm32/stm32_sdio.c and chip/stm32f20xx_pinmap.h: STM32 F2 SDIO fixes from Gary Teravskis and Scott Rondestvedt. * include/termios.h and lib/termios/*: Replace cfsetispeed and cfsetospeed with - cfsetspeed (with definitions for the input/outputs in termios.h). Same for - cfgetispeed and cfgetospeed. + cfsetspeed (with definitions for the input/outputs in termios.h). * configs/stm32f4discovery/src and configs/stm32f4discovery/pm: Add a power management configuration for the STM32F4Discovery and supporting logic. This check-in also includes some fixes for the F4 RTC alarm logic. @@ -3090,10 +3089,10 @@ * arch/mips/src/pic32mx/pic32mx-gpio.c: Now supports the PIC32MX1/2 ANSEL IOPORT register. * lib/string/lib_memchr.c: Add support for memchr() (contributed by Mike Smith) - * lib/string/lib_memccpy.c: Add support for memcpy() + * lib/string/lib_memccpy.c: Add support for memccpy() * arch/arm/src/lpc17xx/lpc17_serial.c: Now supports ioctl commands to change the baud using tcsetattr() (contributed by Chris Taglia). - * arch/*/src/*_serial.c: Fix ioctl method return values. Theses methods + * arch/*/src/*_serial.c: Fix ioctl method return values. These methods should return a negated errno value; they should not set the errno variable. * sched/on_exit.c, sched/task_exithook.c, and include/nuttx/sched.c: Add @@ -3118,7 +3117,7 @@ * arch/arm/src/stm32/stm32*_rcc.c and .h: If CONFIG_PM is defined, add a function called stm32_clockenable() that can be used by PM logic to re-start the PLL after re-awakening from deep sleep modes. - * fs/fs_foreachinode.c and fs/fs_foreachmountpoint.c: All logic to traverse + * fs/fs_foreachinode.c and fs/fs_foreachmountpoint.c: Add logic to traverse inodes and mountpoints in the NuttX pseudo-file system. * fs/fat/fs_fat32.c: Max. filename length reported by statfs() was wrong if FAT long file names were enabled. @@ -3137,7 +3136,7 @@ LPC31xx has the same USB IP, but will require some additional initialization (and lots of testing) before it can be used with the LPC43xx. * nuttx/Documentation/NuttShell.html: Added a section covering ways to - customize the behavior or NSH. + customize the behavior of NSH. * arch/arm/src/stm32/chip/stm32f1*_pinmap.h: STM32 CAN TX/RX pins reversed; inconsistent conditional compilation. Reported by Max Holtzberg. * arch/arm/*/stm32: Add support for STM32 F107 "Connectivity Line" @@ -3166,14 +3165,16 @@ for all 8-bit AVR platforms (Thanks Richard Cochran). * lib/stdio/lib_*stream.c: Revised to handle new error return values from serial.c. - * arch/arm/src/stm32/stm32_spi.c: SPI driver can now survice re- + * arch/arm/src/stm32/stm32_spi.c: SPI driver can now service re- initialization (Mike Smith). * tools/mkconfig.c: If CONFIG_DRAM_END is not specified, this tool will provide default definition of (CONFIG_DRAM_START + CONFIG_DRAM_SIZE) * arch/arm/src/stm32/stm32_otgfshost.c: Renamed from stm32_usbhost.c. This is nearly code complete and, with any luck, will be available - in NuttX-6.22. + in NuttX-6.21. * configs/*/defconfig: Update all defconfig files to remove syntax that is incompatible with the mconf configuration tool. * arch/arm/src/stm32/stm32_otgfshost.c: This driver now appears to be - functional (although more testing is necesary).
\ No newline at end of file + functional (although more testing is necesary). + +6.22 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> |