1 files changed, 99 insertions, 0 deletions
diff --git a/nuttx/configs/dk-tm4c129x/src/tm4c_ethernet.c b/nuttx/configs/dk-tm4c129x/src/tm4c_ethernet.c
new file mode 100644
index 000000000..9394a4522
--- /dev/null
+++ b/nuttx/configs/dk-tm4c129x/src/tm4c_ethernet.c
@@ -0,0 +1,99 @@
+/************************************************************************************
+ * configs/dk-tm4c129x/src/tm4c_ethernet.c
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+#include <assert.h>
+
+#include <arch/board/board.h>
+#include <net/ethernet.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "chip/tiva_flash.h"
+#include "tiva_ethernet.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: tiva_ethernetmac
+ *
+ * Description:
+ *   For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
+ *   USER0 and USER1 registers.  If CONFIG_TIVA_BOARDMAC is defined, this function
+ *   will obtain the MAC address from these registers.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_TIVA_BOARDMAC
+void tiva_ethernetmac(struct ether_addr *ethaddr)
+{
+  uint32_t user0;
+  uint32_t user1;
+
+  /* Get the current value of the user registers */
+
+  user0 = getreg32(TIVA_FLASH_USERREG0);
+  user1 = getreg32(TIVA_FLASH_USERREG1);
+
+  nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
+  DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);
+
+  /* Re-format that MAC address the way that uIP expects to see it */
+
+  ethaddr->ether_addr_octet[0] = ((user0 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[1] = ((user0 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
+  ethaddr->ether_addr_octet[3] = ((user1 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[4] = ((user1 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
+}
+#endif