diff options
Diffstat (limited to 'nuttx/drivers/input/Kconfig')
| -rw-r--r-- | nuttx/drivers/input/Kconfig | 191 |
1 files changed, 190 insertions, 1 deletions
diff --git a/nuttx/drivers/input/Kconfig b/nuttx/drivers/input/Kconfig index 9fde35ff6..1f345ee14 100644 --- a/nuttx/drivers/input/Kconfig +++ b/nuttx/drivers/input/Kconfig @@ -2,6 +2,7 @@ # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # + config INPUT_TSC2007 bool "TI TSC2007 touchscreen controller" default n @@ -9,7 +10,29 @@ config INPUT_TSC2007 ---help--- Enable support for the TI TSC2007 touchscreen controller - +if INPUT_TSC2007 + +config TSC2007_8BIT + bool "8-bit Conversions" + default n + ---help--- + Use faster, but less accurate, 8-bit conversions. Default: 12-bit conversions. + +config TSC2007_MULTIPLE + bool "Multiple TSC2007 Devices" + default n + ---help--- + Can be defined to support multiple TSC2007 devices on board. + +config TSC2007_NPOLLWAITERS + int "Number poll waiters" + default 4 + depends on !DISABLE_POLL + ---help--- + Maximum number of threads that can be waiting on poll() + +endif + config INPUT_ADS7843E bool "TI ADS7843/TSC2046 touchscreen controller" default n @@ -18,3 +41,169 @@ config INPUT_ADS7843E Enable support for the TI/Burr-Brown ADS7842 touchscreen controller. I believe that driver should be compatibile with the TI/Burr-Brown TSC2046 and XPT2046 touchscreen controllers as well. + +if INPUT_ADS7843E + +config ADS7843E_MULTIPLE + bool "Multiple ADS7843E Devices" + default n + ---help--- + Can be defined to support multiple ADS7843E devices on board. + +config ADS7843E_NPOLLWAITERS + int "Number poll waiters" + default 4 + depends on !DISABLE_POLL + ---help--- + Maximum number of threads that can be waiting on poll() + +config ADS7843E_SPIMODE + int "SPI mode" + default 0 + range 0,3 + ---help--- + Controls the SPI mode. The device should work in mode 0, but sometimes + you need to experiment. + +config ADS7843E_FREQUENCY + int "SPI frequency" + default 100000 + ---help--- + Define to use a different SPI bus frequency. + +config ADS7843E_SWAPXY + bool "Swap X/Y" + default n + ---help--- + Reverse the meaning of X and Y to handle different LCD orientations. + +config ADS7843E_THRESHX + int "X threshold" + default 12 + ---help--- + New touch positions will only be reported when the X or Y data changes by these + thresholds. This trades reduces data rate for some loss in dragging accuracy. For + 12-bit values so the raw ranges are 0-4095. So for example, if your display is + 320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel. Default: 12 + +config ADS7843E_THRESHY + int "Y threshold" + default 12 + ---help--- + New touch positions will only be reported when the X or Y data changes by these + thresholds. This trades reduces data rate for some loss in dragging accuracy. For + 12-bit values so the raw ranges are 0-4095. So for example, if your display is + 320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel. Default: 12 + +endif + +config INPUT_STMPE811 + bool "STMicro STMPE811 Driver" + default n + ---help--- + Enables support for the STMPE811 driver + +if INPUT_STMPE811 + +choice + prompt "STMPE Interface" + default STMPE811_I2C + +config STMPE811_SPI + bool "SPI Interface" + select SPI + ---help--- + Enables support for the SPI interface (not currently supported) + +config STMPE811_I2C + bool "STMPE811 I2C Interface" + select I2C + ---help--- + Enables support for the I2C interface + +endchoice + +config STMPE811_MULTIPLE + bool "Multiple STMPE811 Devices" + default n + ---help--- + Can be defined to support multiple STMPE811 devices on board. + +config STMPE811_NPOLLWAITERS + int "Number poll waiters" + default 4 + depends on !DISABLE_POLL + ---help--- + Maximum number of threads that can be waiting on poll() + +config STMPE811_TSC_DISABLE + bool "Disable STMPE811 Touchscreen Support" + default n + ---help--- + Disable driver touchscreen functionality. + +config STMPE811_SWAPXY + bool "Swap X/Y" + default n + depends on !STMPE811_TSC_DISABLE + ---help--- + Reverse the meaning of X and Y to handle different LCD orientations. + +config STMPE811_THRESHX + int "X threshold" + default 12 + depends on !STMPE811_TSC_DISABLE + ---help--- + STMPE811 touchscreen data comes in a a very high rate. New touch positions + will only be reported when the X or Y data changes by these thresholds. + This trades reduces data rate for some loss in dragging accuracy. The + STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So + for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 + would correspond to one pixel. Default: 12 + +config STMPE811_THRESHY + int "Y threshold" + default 12 + depends on !STMPE811_TSC_DISABLE + ---help--- + STMPE811 touchscreen data comes in a a very high rate. New touch positions + will only be reported when the X or Y data changes by these thresholds. + This trades reduces data rate for some loss in dragging accuracy. The + STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So + for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 + would correspond to one pixel. Default: 12 + +config STMPE811_ADC_DISABLE + bool "Disable STMPE811 ADC Support" + default y + ---help--- + Disable driver ADC functionality. + +config STMPE811_GPIO_DISABLE + bool "Disable STMPE811 GPIO Support" + default y + ---help--- + Disable driver GPIO functionality. + +config STMPE811_GPIOINT_DISABLE + bool "Disable STMPE811 GPIO Interrupt Support" + default y + depends on !STMPE811_GPIO_DISABLE + ---help--- + Disable driver GPIO interrupt functionlality (ignored if GPIO functionality is + disabled). + +config STMPE811_TEMP_DISABLE + bool "Disable STMPE811 Temperature Sensor Support" + default y + ---help--- + Disable driver temperature sensor functionality. + +config STMPE811_REGDEBUG + bool "Enable Register-Level STMPE811 Debug" + default n + depends on DEBUG + ---help--- + Enable very low register-level debug output. + +endif |