path: root/apps/system/readline/readline.c

/****************************************************************************
 * lib/stdio/lib_fgets.c
 *
 *   Copyright (C) 2007-2008, 2011-2012 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdbool.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <ctype.h>
#include <errno.h>
#include <debug.h>

#include <apps/readline.h>

/****************************************************************************
 * Definitions
 ****************************************************************************/
/* In some systems, the underlying serial logic may automatically echo
 * characters back to the console.  We will assume that that is not the case
 & here
 */

#define CONFIG_READLINE_ECHO 1

/* Some environments may return CR as end-of-line, others LF, and others
 * both.  The logic here assumes either but not both.
 */

#undef  CONFIG_EOL_IS_CR
#undef  CONFIG_EOL_IS_LF
#undef  CONFIG_EOL_IS_BOTH_CRLF
#define CONFIG_EOL_IS_EITHER_CRLF 1

/****************************************************************************
 * Private Type Declarations
 ****************************************************************************/

/****************************************************************************
 * Private Function Prototypes
 ****************************************************************************/

/****************************************************************************
 * Public Data
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/
/* <esc>[K is the VT100 command erases to the end of the line. */

static const char g_erasetoeol[] = "\033[K";

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: readline_rawgetc
 ****************************************************************************/

static inline int readline_rawgetc(int infd)
{
  char buffer;
  ssize_t nread;

  nread = read(infd, &buffer, 1);
  if (nread < 1)
    {
      /* Return EOF if the end of file (0) or error (-1) occurs */

      return EOF;
    }
  return (int)buffer;
}

/****************************************************************************
 * Name: readline_consoleputc
 ****************************************************************************/

#ifdef CONFIG_READLINE_ECHO
static inline void readline_consoleputc(int ch, int outfd)
{
  char buffer = ch;
  (void)write(outfd, &buffer, 1);
}
#endif

/****************************************************************************
 * Name: readline_consoleputs
 ****************************************************************************/

#ifdef CONFIG_READLINE_ECHO
static inline void readline_consoleputs(FAR const char *str, int outfd)
{
  (void)write(outfd, str, strlen(str));
}
#endif

/****************************************************************************
 * Global Functions
 ****************************************************************************/

/****************************************************************************
 * Name: readline
 *
 *   readline() reads in at most one less than 'buflen' characters from
 *   'instream' and stores them into the buffer pointed to by 'buf'.
 *   Characters are echoed on 'outstream'.  Reading stops after an EOF or a
 *   newline.  If a newline is read, it is stored into the buffer.  A null
 *   terminator is stored after the last character in the buffer.
 *
 *   This version of realine assumes that we are reading and writing to
 *   a VT100 console.  This will not work well if 'instream' or 'outstream'
 *   corresponds to a raw byte steam.
 *
 *   This function is inspired by the GNU readline but is an entirely
 *   different creature.
 *
 * Input Parameters:
 *   buf       - The user allocated buffer to be filled.
 *   buflen    - the size of the buffer.
 *   instream  - The stream to read characters from
 *   outstream - The stream to each characters to.
 *
 * Returned values:
 *   On success, the (positive) number of bytes transferred is returned.
 *   A length of zero would indicated an end of file condition. An failure,
 *   a negated errno value is returned.
 *
 **************************************************************************/

ssize_t readline(FAR char *buf, int buflen, FILE *instream, FILE *outstream)
{
  int  infd;
  int  outfd;
  int  escape;
  int  nch;

  /* Sanity checks */

  if (!instream || !outstream || !buf || buflen < 1)
    {
      return -EINVAL;
    }

  if (buflen < 2)
    {
      *buf = '\0';
      return 0;
    }

  /* Extract the file descriptions.  This is cheating (and horribly non-
   * standard)
   */

  infd   = instream->fs_filedes;
  outfd  = outstream->fs_filedes;

  /* <esc>[K is the VT100 command that erases to the end of the line. */

#ifdef CONFIG_READLINE_ECHO
  readline_consoleputs(g_erasetoeol, outfd);
#endif

  /* Read characters until we have a full line. On each the loop we must
   * be assured that there are two free bytes in the line buffer:  One for
   * the next character and one for the null terminator.
   */

  escape = 0;
  nch    = 0;

  for(;;)
    {
      /* Get the next character */

      int ch = readline_rawgetc(infd);

      /* Are we processing a VT100 escape sequence */

      if (escape)
        {
          /* Yes, is it an <esc>[, 3 byte sequence */

          if (ch != 0x5b || escape == 2)
            {
              /* We are finished with the escape sequence */

              escape = 0;
              ch = 'a';
            }
          else
            {
              /* The next character is the end of a 3-byte sequence.
               * NOTE:  Some of the <esc>[ sequences are longer than
               * 3-bytes, but I have not encountered any in normal use
               * yet and, so, have not provided the decoding logic.
               */

              escape = 2;
            }
        }

      /* Check for backspace */

      else if (ch == 0x08)
        {
          /* Eliminate that last character in the buffer. */

          if (nch > 0)
            {
              nch--;

#ifdef CONFIG_READLINE_ECHO
              /* Echo the backspace character on the console */

              readline_consoleputc(ch, outfd);
              readline_consoleputs(g_erasetoeol, outfd);
#endif
            }
        }

      /* Check for the beginning of a VT100 escape sequence */

      else if (ch == 0x1b)
        {
          /* The next character is escaped */

          escape = 1;
        }

      /* Check for end-of-line.  This is tricky only in that some
       * environments may return CR as end-of-line, others LF, and
       * others both.
       */

#if  defined(CONFIG_EOL_IS_LF) || defined(CONFIG_EOL_IS_BOTH_CRLF)
      else if (ch == '\n')
#elif defined(CONFIG_EOL_IS_CR)
      else if (ch == '\r')
#elif CONFIG_EOL_IS_EITHER_CRLF
      else if (ch == '\n' || ch == '\r')
#endif
        {
          /* The newline is stored in the buffer along with the null
           * terminator.
           */

          buf[nch++] = '\n';
          buf[nch]   = '\0';

#ifdef CONFIG_READLINE_ECHO
          /* Echo the newline to the console */

          readline_consoleputc('\n', outfd);
#endif
          return nch;
        }

      /* Check for end-of-file */

      else if (ch == EOF)
        {
          /* Terminate the line (which might be zero length) */

          buf[nch] = '\0';
          return nch;
        }

      /* Otherwise, check if the character is printable and, if so, put the
       * character in the line buffer
       */

      else if (isprint(ch))
        {
          buf[nch++] = ch;

#ifdef CONFIG_READLINE_ECHO
          /* Echo the character to the console */

          readline_consoleputc(ch, outfd);
#endif
          /* Check if there is room for another character and the line's
           * null terminator.  If not then we have to end the line now.
           */

          if (nch + 1 >= buflen)
            {
              buf[nch] = '\0';
              return nch;
            }
        }
    }
}