path: root/nuttx/arch/arm/src/lpc17xx/lpc17_start.c

/****************************************************************************
 * arch/arm/src/lpc17xx/lpc17_start.c
 * arch/arm/src/chip/lpc17_start.c
 *
 *   Copyright (C) 2010, 2012-2013 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <assert.h>
#include <debug.h>

#include <nuttx/init.h>
#include <arch/board/board.h>

#include "up_arch.h"
#include "up_internal.h"

#include "lpc17_clockconfig.h"
#include "lpc17_lowputc.h"
#include "lpc17_userspace.h"

#ifdef CONFIG_ARCH_FPU
#  include "nvic.h"
#endif

/****************************************************************************
 * Private Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Public Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: showprogress
 *
 * Description:
 *   Print a character on the UART to show boot status.
 *
 ****************************************************************************/

#ifdef CONFIG_DEBUG
#  define showprogress(c) up_lowputc(c)
#else
#  define showprogress(c)
#endif

/****************************************************************************
 * Name: lpc17_fpuconfig
 *
 * Description:
 *   Configure the FPU.  Relative bit settings:
 *
 *     CPACR:  Enables access to CP10 and CP11
 *     CONTROL.FPCA: Determines whether the FP extension is active in the
 *       current context:
 *     FPCCR.ASPEN:  Enables automatic FP state preservation, then the
 *       processor sets this bit to 1 on successful completion of any FP
 *       instruction.
 *     FPCCR.LSPEN:  Enables lazy context save of FP state. When this is
 *       done, the processor reserves space on the stack for the FP state,
 *       but does not save that state information to the stack.
 *
 *  Software must not change the value of the ASPEN bit or LSPEN bit while either:
 *   - the CPACR permits access to CP10 and CP11, that give access to the FP
 *     extension, or
 *   - the CONTROL.FPCA bit is set to 1
 *
 ****************************************************************************/

#ifdef CONFIG_ARCH_FPU
#ifdef CONFIG_ARMV7M_CMNVECTOR

static inline void lpc17_fpuconfig(void)
{
  uint32_t regval;

  /* Set CONTROL.FPCA so that we always get the extended context frame
   * with the volatile FP registers stacked above the basic context.
   */

  regval = getcontrol();
  regval |= (1 << 2);
  setcontrol(regval);

  /* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend
   * with the lazy FP context save behaviour.  Clear FPCCR.ASPEN since we
   * are going to turn on CONTROL.FPCA for all contexts.
   */

  regval = getreg32(NVIC_FPCCR);
  regval &= ~((1 << 31) | (1 << 30));
  putreg32(regval, NVIC_FPCCR);

  /* Enable full access to CP10 and CP11 */

  regval = getreg32(NVIC_CPACR);
  regval |= ((3 << (2*10)) | (3 << (2*11)));
  putreg32(regval, NVIC_CPACR);
}

#else

static inline void lpc17_fpuconfig(void)
{
  uint32_t regval;

  /* Clear CONTROL.FPCA so that we do not get the extended context frame
   * with the volatile FP registers stacked in the saved context.
   */

  regval = getcontrol();
  regval &= ~(1 << 2);
  setcontrol(regval);

  /* Ensure that FPCCR.LSPEN is disabled, so that we don't have to contend
   * with the lazy FP context save behaviour.  Clear FPCCR.ASPEN since we
   * are going to keep CONTROL.FPCA off for all contexts.
   */

  regval = getreg32(NVIC_FPCCR);
  regval &= ~((1 << 31) | (1 << 30));
  putreg32(regval, NVIC_FPCCR);

  /* Enable full access to CP10 and CP11 */

  regval = getreg32(NVIC_CPACR);
  regval |= ((3 << (2*10)) | (3 << (2*11)));
  putreg32(regval, NVIC_CPACR);
}

#endif

#else
#  define lpc17_fpuconfig()
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: _start
 *
 * Description:
 *   This is the reset entry point.
 *
 ****************************************************************************/

void __start(void)
{
  const uint32_t *src;
  uint32_t *dest;

  /* Configure the uart so that we can get debug output as soon as possible */

  lpc17_clockconfig();
  lpc17_fpuconfig();
  lpc17_lowsetup();
  showprogress('A');

  /* Clear .bss.  We'll do this inline (vs. calling memset) just to be
   * certain that there are no issues with the state of global variables.
   */

  for (dest = &_sbss; dest < &_ebss; )
    {
      *dest++ = 0;
    }

  showprogress('B');

  /* Move the initialized data section from his temporary holding spot in
   * FLASH into the correct place in SRAM.  The correct place in SRAM is
   * give by _sdata and _edata.  The temporary location is in FLASH at the
   * end of all of the other read-only data (.text, .rodata) at _eronly.
   */

  for (src = &_eronly, dest = &_sdata; dest < &_edata; )
    {
      *dest++ = *src++;
    }

  showprogress('C');

  /* Perform early serial initialization */

#ifdef USE_EARLYSERIALINIT
  up_earlyserialinit();
#endif
  showprogress('D');

  /* For the case of the separate user-/kernel-space build, perform whatever
   * platform specific initialization of the user memory is required.
   * Normally this just means initializing the user space .data and .bss
   * segments.
   */

#ifdef CONFIG_BUILD_PROTECTED
  lpc17_userspace();
  showprogress('E');
#endif

  /* Initialize onboard resources */

  lpc17_boardinitialize();
  showprogress('F');

  /* Then start NuttX */

  showprogress('\r');
  showprogress('\n');
  os_start();

  /* Shouldn't get here */

  for (;;);
}