path: root/nuttx/arch/z16/src/z16f/chip.h

/************************************************************************************
 * arch/z16/src/z16f/chip.h
 *
 *   Copyright (C) 2008-2009, 2014 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_Z16_SRC_Z16F_CHIP_H
#define __ARCH_Z16_SRC_Z16F_CHIP_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#ifndef __ASSEMBLY__
#  include <stdint.h>
#endif

#include <arch/irq.h>
#if !defined(__ASSEMBLY__) && defined(CONFIG_Z16F_ESPI)
#  include <nuttx/spi/spi.h>
#endif

#include "common/up_internal.h"

/************************************************************************************
 * Definitions
 ************************************************************************************/

/* Hexadecimal Representation *******************************************************/

#ifdef __ASSEMBLY__
# define _HX32(w)   %##w
# define _HX8(b)    %##b
#else
# define _HX32(w)   0x##w
# define _HX8(b)    0x##b
#endif

/* Z16F Chip Variants ***************************************************************/

#if defined(CONFIG_ARCH_CHIP_Z16F2810)
# define Z16F_INVMEM_SIZE        (128*1024)
# define Z16F_IRAM_SIZE          (4*1024)
# undef  Z16F_HAVE_EXTMEM
# undef  Z16F_HAVE_GPIO_PORTJ
# undef  Z16F_HAVE_GPIO_PORTK
#elif defined(CONFIG_ARCH_CHIP_Z16F2811)
# define Z16F_INVMEM_SIZE        (128*1024)
# define Z16F_IRAM_SIZE          (4*1024)
# define Z16F_HAVE_EXTMEM        1
# define Z16F_HAVE_GPIO_PORTJ    1
# define Z16F_HAVE_GPIO_PORTK    1
#elif defined(CONFIG_ARCH_CHIP_Z16F3211)
# define Z16F_INVMEM_SIZE        (32*1024)
# define Z16F_IRAM_SIZE          (2*1024)
# define Z16F_HAVE_EXTMEM        1
#elif defined(CONFIG_ARCH_CHIP_Z16F6411)
# define Z16F_INVMEM_SIZE        (64*1024)
# define Z16F_IRAM_SIZE          (4*1024)
# define Z16F_HAVE_EXTMEM        1
#else
# error "Z16F chip variant not specified"
#endif

/* Flash option settings at address 0x00000000 ************************************/

#define Z16F_FLOPTION0           rom char _flash_option0 _At 0x0
#define Z16F_FLOPTION1           rom char _flash_option1 _At 0x1
#define Z16F_FLOPTION2           rom char _flash_option2 _At 0x2
#define Z16F_FLOPTION3           rom char _flash_option3 _At 0x3

#define Z16F_FLOPTION0_OSCSEL    _HX8(c0)        /* Bits 6-7: OSC_SEL */
#define Z16F_FLOPTION0_EXTRNRC   _HX8(00)        /* 00: On-chip oscillator with ext RC networks */
#define Z16F_FLOPTION0_LOWFREQ   _HX8(40)        /* 01: Min. power with very low frequency crystals */
#define Z16F_FLOPTION0_MEDFREQ   _HX8(80)        /* 10: Medium power with medium frequency crystals */
#define Z16F_FLOPTION0_MAXPWR    _HX8(c0)        /* 11: Maximum power with high frequency crystals */
#define Z16F_FLOPTION0_WDTRES    _HX8(20)        /* Bit 5: WDT Reset */
#define Z16F_FLOPTION0_WDTA0     _HX8(10)        /* Bit 4: WDT Always On */
#define Z16F_FLOPTION0_VBOA0     _HX8(08)        /* Bit 3: Voltage Brown-Out Protection Always On */
#define Z16F_FLOPTION0_DBGUART   _HX8(04)        /* Bit 2: Debug UART Enable */
#define Z16F_FLOPTION0_FWP       _HX8(02)        /* Bit 1: Flash Write Protect */
#define Z16F_FLOPTION0_RP        _HX8(01)        /* Bit 0: Read Protect */

#define Z16F_FLOPTION1_RESVD     _HX8(f8)        /* Bits 3-7: Reserved */
#define Z16F_FLOPTION1_MCEN      _HX8(04)        /* Bit 2: Motor control pins enable */
#define Z16F_FLOPTION1_OFFH      _HX8(02)        /* Bit 1: High side OFF */
#define Z16F_FLOPTION1_OFFL      _HX8(01)        /* Bit 0: Low side OFF */

#define Z16F_FLOPTION2_RESVD     _HX8(ff)        /* Bits 0-7: reserved */

#define Z16F_FLOPTION3_ROMLESS   _HX8(80)        /* Bit 7: ROMLESS 16 Select */
#define Z16F_FLOPTION3_NORMAL    _HX8(40)        /* Bit 6: 1:Normal 0:Low power mode */
#define Z16F_FLOPTION3_RESVD     _HX8(3f)        /* Bits 0-5: Reserved */

/* Memory areas *******************************************************************
 *
 * Internal non-volatile memory starts at address zero.  The size
 * of the internal non-volatile memory is chip-dependent.
 */

#define Z16F_INVMEM_BASE         _HX32(00000000)

/* Most chip variants support external memory */

#ifdef Z16F_HAVE_EXTMEM
#  define Z16F_EXTMEMCS0_BASE    _HX32(00000000) /* External memory at CS0 */
#  define Z16F_EXTMEMCS0_SIZE    _HX32(007e0000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS1_BASE    _HX32(ff800000) /* External memory at CS1 */
#  define Z16F_EXTMEMCS1_SIZE    _HX32(00700000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS2A_BASE   _HX32(fff00000) /* External memory at CS2 */
#  define Z16F_EXTMEMCS2A_SIZE   _HX32(000f8000) /*   (actual depends on board) */
#  define Z16F_EXTMEMCS2B_BASE   _HX32(ffffc000) /* External memory at CS2 */
#  define Z16F_EXTMEMCS2B_SIZE   _HX32(00000800) /*   (actual depends on board) */
#endif

/* Internal RAM always ends at 0xffbfff.  The IRAM base address depends
 * on the size of the IRAM supported by the chip.
 */

#define Z16F_IRAM_BASE           (_HX32(ffffc000) - Z16F_IRAM_SIZE)

/* External memory mapped peripherals, internal I/O memory and SFRS */

#define Z16F_EXTIO_BASE          _HX32(ffffc800) /* External peripherals CS3-5 */
#define Z16F_EXTIO_SIZE          _HX32(00001800)
#define Z16F_IIO_BASE            _HX32(ffffe000) /* Internal I/O memory and SFRs */
#define Z16F_IIO_SIZE            _HX32(00001fff)

/* Control Registers  ***************************************************************/

#define Z16F_CNTRL_PCOV          _HX32(ffffe004) /* 32-bits: Program counter overflow */
#define Z16F_CNTRL_SPOV          _HX32(ffffe00c) /* 32-bits: Stack pointer overflow */
#define Z16F_CNTRL_FLAGS         _HX32(ffffe100) /*  8-bits: flags */
#define Z16F_CNTRL_CPUCTL        _HX32(ffffe102) /*  8-bits: CPU control */

/* Flag register bits ***************************************************************/

#define Z16F_CNTRL_FLAGS_C       _HX8(80)        /* Bit 7: Carry flag */
#define Z16F_CNTRL_FLAGS_Z       _HX8(40)        /* Bit 6: Zero flag */
#define Z16F_CNTRL_FLAGS_S       _HX8(20)        /* Bit 5: Sign flag */
#define Z16F_CNTRL_FLAGS_V       _HX8(10)        /* Bit 4: Overflow flag */
#define Z16F_CNTRL_FLAGS_B       _HX8(08)        /* Bit 3: Blank flag */
#define Z16F_CNTRL_FLAGS_F1      _HX8(04)        /* Bit 2: User flag 1 */
#define Z16F_CNTRL_FLAGS_CIRQE   _HX8(02)        /* Bit 1: Chained interrupt enable */
#define Z16F_CNTRL_FLAGS_IRQE    _HX8(01)        /* Bit 0: Master interrupt enable */

/* CPU control register bits ********************************************************/

                                                 /* Bits 7-2: Reserved, must be zero */
                                                 /* Bits 1-0: DMA bandwidth control */
#define Z16F_CNTRL_CPUCTL_BWALL  _HX8(00)        /*   DMA can consume 100% bandwidth */
#define Z16F_CNTRL_CPUCTL_BW11   _HX8(01)        /*   DMA can do 1 transaction per 1 cycle */
#define Z16F_CNTRL_CPUCTL_BW12   _HX8(01)        /*   DMA can do 1 transaction per 2 cycles */
#define Z16F_CNTRL_CPUCTL_BW13   _HX8(01)        /*   DMA can do 1 transaction per 3 cycles */

/* Trace registers ******************************************************************/

#define Z16F_TRACE_CTL           _HX32(ffffe013) /*  8-bit: Trace Control */
#define Z16F_TRACE_ADDR          _HX32(ffffe014) /* 32-bit: Trace Address */

/* Interrupt controller registers ***************************************************/

#define Z16F_SYSEXCP             _HX32(ffffe020) /* 16-bit: System Exception Status */
#  define Z16F_SYSEXCPH          _HX32(ffffe020) /*  8-bit: System Exception Status High */
#  define Z16F_SYSEXCPL          _HX32(ffffe021) /*  8-bit: System Exception Status Low */
#define Z16F_LASTIRQ             _HX32(ffffe023) /*  8-bit: Last IRQ Register */
#define Z16F_IRQ0                _HX32(ffffe030) /*  8-bit: Interrupt Request 0 */
#define Z16F_IRQ0_SET            _HX32(ffffe031) /*  8-bit: Interrupt Request 0 Set */
#define Z16F_IRQ0_EN             _HX32(ffffe032) /* 16-bit: IRQ0 Enable */
#  define Z16F_IRQ0_ENH          _HX32(ffffe032) /*  8-bit: IRQ0 Enable High Bit */
#  define Z16F_IRQ0_ENL          _HX32(ffffe033) /*  8-bit: IRQ0 Enable Low Bit */
#define Z16F_IRQ1                _HX32(ffffe034) /*  8-bit: Interrupt Request 1 */
#define Z16F_IRQ1_SET            _HX32(ffffe035) /*  8-bit: Interrupt Request 1 Set */
#define Z16F_IRQ1_EN             _HX32(ffffe036) /* 16-bit: IRQ1 Enable */
#  define Z16F_IRQ1_ENH          _HX32(ffffe036) /*  8-bit: IRQ1 Enable High Bit */
#  define Z16F_IRQ1_ENL          _HX32(ffffe037) /*  8-bit: IRQ1 Enable Low Bit */
#define Z16F_IRQ2                _HX32(ffffe038) /*  8-bit: Interrupt Request 2 */
#define Z16F_IRQ2_SET            _HX32(ffffe039) /*  8-bit  Interrupt Request 2 Set */
#define Z16F_IRQ2_EN             _HX32(ffffe03a) /* 16-bit: IRQ2 Enable */
#  define Z16F_IRQ2_ENH          _HX32(ffffe03a) /*  8-bit: IRQ2 Enable High Bit */
#  define Z16F_IRQ2_ENL          _HX32(ffffe03c) /*  8-bit: IRQ2 Enable Low Bit */

/* System exception status register bit definitions *********************************/

#define Z16F_SYSEXCPH_SPOVF      _HX8(80)        /* Bit 7: Stack pointer overflow */
#define Z16F_SYSEXCPH_PCOVF      _HX8(40)        /* Bit 6: Program counter overflow */
#define Z16F_SYSEXCPH_DIV0       _HX8(20)        /* Bit 5: Divide by zero */
#define Z16F_SYSEXCPH_DIVOVF     _HX8(10)        /* Bit 4: Divide overflow */
#define Z16F_SYSEXCPH_ILL        _HX8(08)        /* Bit 3: Illegal instruction */
                                                 /* Bits 0-2: Reserved */
                                                 /* Bits 3-7: Reserved */
#define Z16F_SYSEXCPL_WDTOSC     _HX8(04)        /* Bit 2: WDT oscillator failure */
#define Z16F_SYSEXCPL_PRIOSC     _HX8(02)        /* Bit 1: Primary oscillator failure */
#define Z16F_SYSEXCPL_WDT        _HX8(01)        /* Bit 0: Watchdog timer interrupt */

#define Z16F_SYSEXCP_SPOVF       (Z16F_SYSEXCPH_SPOVF << 8)
#define Z16F_SYSEXCP_PCOVF       (Z16F_SYSEXCPH_PCOVF << 8)
#define Z16F_SYSEXCP_DIV0        (Z16F_SYSEXCPH_DIV0 << 8)
#define Z16F_SYSEXCP_DIVOVF      (Z16F_SYSEXCPH_DIVOVF << 8)
#define Z16F_SYSEXCP_ILL         (Z16F_SYSEXCPH_ILL << 8)
#define Z16F_SYSEXCP_WDTOSC      Z16F_SYSEXCPL_WDTOSC
#define Z16F_SYSEXCP_PRIOSC      Z16F_SYSEXCPL_PRIOSC
#define Z16F_SYSEXCP_WDT         Z16F_SYSEXCPL_WDT

/* External memory interface ********************************************************/

#define Z16F_EXTCT               _HX32(ffffe070) /* External Interface Control */
#define Z16F_EXTCS0              _HX32(ffffe072) /* Chip Select 0 Control */
#  define Z16F_EXTCS0H           _HX32(ffffe072) /* Chip Select 0 Control High */
#  define Z16F_EXTCS0L           _HX32(ffffe073) /* Chip Select 0 Control Low */
#define Z16F_EXTCS1              _HX32(ffffe074) /* Chip Select 1 Control */
#  define Z16F_EXTCS1H           _HX32(ffffe074) /* Chip Select 1 Control High */
#  define Z16F_EXTCS1L           _HX32(ffffe075) /* Chip Select 1 Control Low */
#define Z16F_EXTCS2              _HX32(ffffe076) /* Chip Select 2 Control */
#  define Z16F_EXTCS2H           _HX32(ffffe076) /* Chip Select 2 Control High */
#  define Z16F_EXTCS2L           _HX32(ffffe077) /* Chip Select 2 Control Low */
#define Z16F_EXTCS3              _HX32(ffffe078) /* Chip Select 3 Control */
#  define Z16F_EXTCS3H           _HX32(ffffe078) /* Chip Select 3 Control High */
#  define Z16F_EXTCS3L           _HX32(ffffe079) /* Chip Select 3 Control Low */
#define Z16F_EXTCS4              _HX32(ffffe07a) /* Chip Select 4 Control  */
#  define Z16F_EXTCS4H           _HX32(ffffe07a) /* Chip Select 4 Control High  */
#  define Z16F_EXTCS4L           _HX32(ffffe07b) /* Chip Select 4 Control Low */
#define Z16F_EXTCS5              _HX32(ffffe07c) /* Chip Select 5 Control */
#  define Z16F_EXTCS5H           _HX32(ffffe07c) /* Chip Select 5 Control High */
#  define Z16F_EXTCS5L           _HX32(ffffe07d) /* Chip Select 5 Control Low */

/* Oscillator control registers *****************************************************/

#define Z16F_OSC_CTL             _HX32(ffffe0A0) /*  8-bit: Oscillator Control */
#define Z16F_OSC_DIV             _HX32(ffffe0A1) /*  8-bit: Oscillator Divide */

/* Oscillator control register bits *************************************************/

#define Z16F_OSCCTL_INTEN        _HX8(80)        /* Bit 7: Internal oscillator enabled */
#define Z16F_OSCCTL_XTLEN        _HX8(40)        /* Bit 6: Crystal oscillator enabled */
#define Z16F_OSCCTL_WDTEN        _HX8(20)        /* Bit 5: Watchdog timer enabled */
#define Z16F_OSCCTL_POFEN        _HX8(10)        /* Bit 4: Failure detection enabled */
#define Z16F_OSCCTL_WDFEN        _HX8(08)        /* Bit 3: WD Failure detection enabled*/
#define Z16F_OSCCTL_FLPEN        _HX8(04)        /* Bit 2: Flash low power enabled */
#define Z16F_OSCCTL_INT56        _HX8(00)        /* Bits 0-1=0: Internal 5.6 MHz */
#define Z16F_OSCCTL_EXTCLK       _HX8(02)        /* Bits 0-1=2: External clock */
#define Z16F_OSCCTL_WDT10KHZ     _HX8(03)        /* Bits 0-1=3: WD Timer 10 KHz*/

/* GPIO Port A-K ********************************************************************/

#define Z16F_GPIOA_IN            _HX32(ffffe100) /*  8-bits: Port A Input Data */
#define Z16F_GPIOA_OUT           _HX32(ffffe101) /*  8-bits: Port A Output Data */
#define Z16F_GPIOA_DD            _HX32(ffffe102) /*  8-bits: Port A Data Direction */
#define Z16F_GPIOA_HDE           _HX32(ffffe103) /*  8-bits: Port A High Drive Enable */
#define Z16F_GPIOA_AF            _HX32(ffffe104) /* 16-bits: Port A Alternate Function */
#  define Z16F_GPIOA_AFH         _HX32(ffffe104) /*  8-bits: Port A Alternate Function High */
#  define Z16F_GPIOA_AFL         _HX32(ffffe105) /*  8-bits: Port A Alternate Function Low */
#define Z16F_GPIOA_OC            _HX32(ffffe106) /*  8-bits: Port A Output Control */
#define Z16F_GPIOA_PUE           _HX32(ffffe107) /*  8-bits: Port A Pull-Up Enable */
#define Z16F_GPIOA_SMRE          _HX32(ffffe108) /*  8-bits: Port A Stop Mode Recovery En */
#define Z16F_GPIOA_IMUX1         _HX32(ffffe10c) /*  8-bits: Port A IRQ Mux 1 */
#define Z16F_GPIOA_IMUX          _HX32(ffffe10e) /*  8-bits: Port A IRQ Mux */
#define Z16F_GPIOA_IEDGE         _HX32(ffffe10f) /*  8-bits: Port A IRQ Edge */

#define Z16F_GPIOB_IN            _HX32(ffffe110) /*  8-bits: Port B Input Data */
#define Z16F_GPIOB_OUT           _HX32(ffffe111) /*  8-bits: Port B Output Data */
#define Z16F_GPIOB_DD            _HX32(ffffe112) /*  8-bits: Port B Data Direction */
#define Z16F_GPIOB_HDE           _HX32(ffffe113) /*  8-bits: Port B High Drive Enable */
#define Z16F_GPIOB_AFL           _HX32(ffffe115) /*  8-bits: Port B Alternate Function Low */
#define Z16F_GPIOB_OC            _HX32(ffffe116) /*  8-bits: Port B Output Control */
#define Z16F_GPIOB_PUE           _HX32(ffffe117) /*  8-bits: Port B Pull-Up Enable */
#define Z16F_GPIOB_SMRE          _HX32(ffffe118) /*  8-bits: Port B Stop Mode Recovery En */

#define Z16F_GPIOC_IN            _HX32(ffffe120) /*  8-bits: Port C Input Data */
#define Z16F_GPIOC_OUT           _HX32(ffffe121) /*  8-bits: Port C Output Data */
#define Z16F_GPIOC_DD            _HX32(ffffe122) /*  8-bits: Port C Data Direction */
#define Z16F_GPIOC_HDE           _HX32(ffffe123) /*  8-bits: Port C High Drive Enable */
#define Z16F_GPIOC_AF            _HX32(ffffe124) /* 16-bits: Port C Alternate Function */
#  define Z16F_GPIOC_AFH         _HX32(ffffe124) /*  8-bits: Port C Alternate Function High */
#  define Z16F_GPIOC_AFL         _HX32(ffffe125) /*  8-bits: Port C Alternate Function Low */
#define Z16F_GPIOC_OC            _HX32(ffffe126) /*  8-bits: Port C Output Control */
#define Z16F_GPIOC_PUE           _HX32(ffffe127) /*  8-bits: Port C Pull-Up Enable */
#define Z16F_GPIOC_SMRE          _HX32(ffffe128) /*  8-bits: Port C Stop Mode Recovery En */
#define Z16F_GPIOC_IMUX          _HX32(ffffe12e) /*  8-bits: Port C IRQ Mux */

#define Z16F_GPIOD_IN            _HX32(ffffe130) /*  8-bits: Port D Input Data */
#define Z16F_GPIOD_OUT           _HX32(ffffe131) /*  8-bits: Port D Output Data */
#define Z16F_GPIOD_DD            _HX32(ffffe132) /*  8-bits: Port D Data Direction */
#define Z16F_GPIOD_HDE           _HX32(ffffe133) /*  8-bits: Port D High Drive Enable */
#define Z16F_GPIOD_AF            _HX32(ffffe134) /* 16-bits: Port D Alternate Function */
#  define Z16F_GPIOD_AFH         _HX32(ffffe134) /*  8-bits: Port D Alternate Function High */
#  define Z16F_GPIOD_AFL         _HX32(ffffe135) /*  8-bits: Port D Alternate Function Low */
#define Z16F_GPIOD_OC            _HX32(ffffe136) /*  8-bits: Port D Output Control */
#define Z16F_GPIOD_PUE           _HX32(ffffe137) /*  8-bits: Port D Pull-Up Enable */
#define Z16F_GPIOD_SMRE          _HX32(ffffe138) /*  8-bits: Port D Stop Mode Recovery En */

#define Z16F_GPIOE_IN            _HX32(ffffe140) /*  8-bits: Port E Input Data */
#define Z16F_GPIOE_OUT           _HX32(ffffe141) /*  8-bits: Port E Output Data */
#define Z16F_GPIOE_DD            _HX32(ffffe142) /*  8-bits: Port E Data Direction */
#define Z16F_GPIOE_HDE           _HX32(ffffe143) /*  8-bits: Port E High Drive Enable */
#define Z16F_GPIOE_OC            _HX32(ffffe146) /*  8-bits: Port E Output Control */
#define Z16F_GPIOE_PUE           _HX32(ffffe147) /*  8-bits: Port E Pull-Up Enable */
#define Z16F_GPIOE_SMRE          _HX32(ffffe148) /*  8-bits: Port E Stop Mode Recovery En */

#define Z16F_GPIOF_IN            _HX32(ffffe150) /*  8-bits: Port F Input Data */
#define Z16F_GPIOF_OUT           _HX32(ffffe151) /*  8-bits: Port F Output Data */
#define Z16F_GPIOF_DD            _HX32(ffffe152) /*  8-bits: Port F Data Direction */
#define Z16F_GPIOF_HDE           _HX32(ffffe153) /*  8-bits: Port F High Drive Enable */
#define Z16F_GPIOF_AFL           _HX32(ffffe155) /*  8-bits: Port F Alternate Function Low */
#define Z16F_GPIOF_OC            _HX32(ffffe156) /*  8-bits: Port F Output Control */
#define Z16F_GPIOF_PUE           _HX32(ffffe157) /*  8-bits: Port F Pull-Up Enable */
#define Z16F_GPIOF_SMRE          _HX32(ffffe158) /*  8-bits: Port F Stop Mode Recovery En */

#define Z16F_GPIOG_IN            _HX32(ffffe160) /*  8-bits: Port G Input Data */
#define Z16F_GPIOG_OUT           _HX32(ffffe161) /*  8-bits: Port G Output Data */
#define Z16F_GPIOG_DD            _HX32(ffffe162) /*  8-bits: Port G Data Direction */
#define Z16F_GPIOG_HDE           _HX32(ffffe163) /*  8-bits: Port G High Drive Enable */
#define Z16F_GPIOG_AFL           _HX32(ffffe165) /*  8-bits: Port G Alternate Function Low */
#define Z16F_GPIOG_OC            _HX32(ffffe166) /*  8-bits: Port G Output Control */
#define Z16F_GPIOG_PUE           _HX32(ffffe167) /*  8-bits: Port G Pull-Up Enable */
#define Z16F_GPIOG_SMRE          _HX32(ffffe168) /*  8-bits: Port G Stop Mode Recovery En */

#define Z16F_GPIOH_IN            _HX32(ffffe170) /*  8-bits: Port H Input Data */
#define Z16F_GPIOH_OUT           _HX32(ffffe171) /*  8-bits: Port H Output Data */
#define Z16F_GPIOH_DD            _HX32(ffffe172) /*  8-bits: Port H Data Direction */
#define Z16F_GPIOH_HDE           _HX32(ffffe173) /*  8-bits: Port H High Drive Enable */
#define Z16F_GPIOH_AF            _HX32(ffffe174) /* 16-bits: Port H Alternate Function */
#  define Z16F_GPIOH_AFH         _HX32(ffffe174) /*  8-bits: Port H Alternate Function High */
#  define Z16F_GPIOH_AFL         _HX32(ffffe175) /*  8-bits: Port H Alternate Function LOw */
#define Z16F_GPIOH_OC            _HX32(ffffe176) /*  8-bits: Port H Output Control */
#define Z16F_GPIOH_PUE           _HX32(ffffe177) /*  8-bits: Port H Pull-Up Enable */
#define Z16F_GPIOH_SMRE          _HX32(ffffe178) /*  8-bits: Port H Stop Mode Recovery En */

#ifdef Z16F_HAVE_GPIO_PORTJ
# define Z16F_GPIOJ_IN           _HX32(ffffe180) /*  8-bits: Port J Input Data */
# define Z16F_GPIOJ_OUT          _HX32(ffffe181) /*  8-bits: Port J Output Data */
# define Z16F_GPIOJ_DD           _HX32(ffffe182) /*  8-bits: Port J Data Direction */
# define Z16F_GPIOJ_HDE          _HX32(ffffe183) /*  8-bits: Port J High Drive Enable */
# define Z16F_GPIOJ_OC           _HX32(ffffe186) /*  8-bits: Port J Output Control */
# define Z16F_GPIOJ_PUE          _HX32(ffffe187) /*  8-bits: Port J Pull-Up Enable */
# define Z16F_GPIOJ_SMRE         _HX32(ffffe188) /*  8-bits: Port J Stop Mode Recovery En */
#endif

#ifdef Z16F_HAVE_GPIO_PORTK
# define Z16F_GPIOK_IN           _HX32(ffffe190) /*  8-bits: Port K Input Data */
# define Z16F_GPIOK_OUT          _HX32(ffffe191) /*  8-bits: Port K Output Data */
# define Z16F_GPIOK_DD           _HX32(ffffe192) /*  8-bits: Port K Data Direction */
# define Z16F_GPIOK_HDE          _HX32(ffffe193) /*  8-bits: Port K High Drive Enable */
# define Z16F_GPIOK_AFL          _HX32(ffffe195) /*  8-bits: Port K Alternate Function Low */
# define Z16F_GPIOK_OC           _HX32(ffffe196) /*  8-bits: Port K Output Control */
# define Z16F_GPIOK_PUE          _HX32(ffffe197) /*  8-bits: Port K Pull-Up Enable */
# define Z16F_GPIOK_SMRE         _HX32(ffffe198) /*  8-bits: Port K Stop Mode Recovery En */
#endif

/* UART Register Offsets *************************************************************/

#define Z16F_UART_TXD            _HX8(00)        /*  8-bits: UART Transmit Data */
#define Z16F_UART_RXD            _HX8(00)        /*  8-bits: UART Receive Data */
#define Z16F_UART_STAT0          _HX8(01)        /*  8-bits: UART Status 0 */
#define Z16F_UART_CTL            _HX8(02)        /* 16-bits: UART Control */
#  define Z16F_UART_CTL0         _HX8(02)        /*  8-bits: UART Control 0 */
#  define Z16F_UART_CTL1         _HX8(03)        /*  8-bits: UART COntrol 1 */
#define Z16F_UART_MDSTAT         _HX8(04)        /*  8-bits: UART Mode Select & Status */
#define Z16F_UART_ADDR           _HX8(05)        /*  8-bits: UART Address Compare */
#define Z16F_UART_BR             _HX8(06)        /* 16-bits: UART Baud Rate */
#  define Z16F_UART_BRH          _HX8(06)        /*  8-bits: UART Baud Rate High Byte */
#  define Z16F_UART_BRL          _HX8(07)        /*  8-bits: UART Baud Rate Low Byte */

#define Z16F_UART0_BASE          _HX32(ffffe200) /* UART0 Register Base Address */
#define Z16F_UART1_BASE          _HX32(ffffe210) /* UART1 Register Base Address */

/* UART0/1 Registers ****************************************************************/

#define Z16F_UART0_TXD           _HX32(ffffe200) /*  8-bits: UART0 Transmit Data */
#define Z16F_UART0_RXD           _HX32(ffffe200) /*  8-bits: UART0 Receive Data */
#define Z16F_UART0_STAT0         _HX32(ffffe201) /*  8-bits: UART0 Status 0 */
#define Z16F_UART0_CTL           _HX32(ffffe202) /* 16-bits: UART0 Control */
#  define Z16F_UART0_CTL0        _HX32(ffffe202) /*  8-bits: UART0 Control 0 */
#  define Z16F_UART0_CTL1        _HX32(ffffe203) /*  8-bits: UART0 COntrol 1 */
#define Z16F_UART0_MDSTAT        _HX32(ffffe204) /*  8-bits: UART0 Mode Select & Status */
#define Z16F_UART0_ADDR          _HX32(ffffe205) /*  8-bits: UART0 Address Compare */
#define Z16F_UART0_BR            _HX32(ffffe206) /* 16-bits: UART0 Baud Rate */
#  define Z16F_UART0_BRH         _HX32(ffffe206) /*  8-bits: UART0 Baud Rate High Byte */
#  define Z16F_UART0_BRL         _HX32(ffffe207) /*  8-bits: UART0 Baud Rate Low Byte */

#define Z16F_UART1_TXD           _HX32(ffffe210) /*  8-bits: UART1 Transmit Data */
#define Z16F_UART1_RXD           _HX32(ffffe210) /*  8-bits: UART1 Receive Data */
#define Z16F_UART1_STAT0         _HX32(ffffe211) /*  8-bits: UART1 Status 0 */
#define Z16F_UART1_CTL           _HX32(ffffe212) /* 16-bits: UART1 Control */
#  define Z16F_UART1_CTL0        _HX32(ffffe212) /*  8-bits: UART1 Control 0 */
#  define Z16F_UART1_CTL1        _HX32(ffffe213) /*  8-bits: UART1 COntrol 1 */
#define Z16F_UART1_MDSTAT        _HX32(ffffe214) /*  8-bits: UART1 Mode Select & Status */
#define Z16F_UART1_ADDR          _HX32(ffffe215) /*  8-bits: UART1 Address Compare */
#define Z16F_UART1_BR            _HX32(ffffe216) /* 16-bits: UART1 Baud Rate */
#  define Z16F_UART1_BRH         _HX32(ffffe216) /*  8-bits: UART1 Baud Rate High Byte */
#  define Z16F_UART1_BRL         _HX32(ffffe217) /*  8-bits: UART1 Baud Rate Low Byte */

/* UART0/1 Status 0 Register Bit Definitions ****************************************/

#define Z16F_UARTSTAT0_RDA       _HX8(80)        /* Bit 7: Receive Data Available */
#define Z16F_UARTSTAT0_PE        _HX8(40)        /* Bit 6: Parity Error */
#define Z16F_UARTSTAT0_OE        _HX8(20)        /* Bit 5: Overrun Error */
#define Z16F_UARTSTAT0_FE        _HX8(10)        /* Bit 4: Framing Error */
#define Z16F_UARTSTAT0_BRKD      _HX8(08)        /* Bit 3: Break Detect */
#define Z16F_UARTSTAT0_TDRE      _HX8(04)        /* Bit 2: Transmitter Data Register Empty */
#define Z16F_UARTSTAT0_TXE       _HX8(02)        /* Bit 1: Transmitter Empty */
#define Z16F_UARTSTAT0_CTS       _HX8(01)        /* Bit 0: Clear To Send */

/* UART0/1 Control 0/1 Register Bit Definitions *************************************/

#define Z16F_UARTCTL0_TEN        _HX8(80)        /* Bit 7: Transmit Enable */
#define Z16F_UARTCTL0_REN        _HX8(40)        /* Bit 6: Receive Enable */
#define Z16F_UARTCTL0_CTSE       _HX8(20)        /* Bit 5: CTS Enable */
#define Z16F_UARTCTL0_PEN        _HX8(10)        /* Bit 4: Parity Enable */
#define Z16F_UARTCTL0_PSEL       _HX8(08)        /* Bit 3: Odd Parity Select */
#define Z16F_UARTCTL0_SBRK       _HX8(04)        /* Bit 2: Send Break */
#define Z16F_UARTCTL0_STOP       _HX8(02)        /* Bit 1: Stop Bit Select */
#define Z16F_UARTCTL0_LBEN       _HX8(01)        /* Bit 0: Loopback Enable */

#define Z16F_UARTCTL1_MPMD1      _HX8(80)        /* Bit 7: Multiprocessor Mode (bit1) */
#define Z16F_UARTCTL1_MPEN       _HX8(40)        /* Bit 6: Multiprocessor Enable */
#define Z16F_UARTCTL1_MPMD0      _HX8(20)        /* Bit 5: Multiprocessor Mode (bit0) */
#define Z16F_UARTCTL1_MPBT       _HX8(10)        /* Bit 4: Multiprocessor Bit Transmit */
#define Z16F_UARTCTL1_DEPOL      _HX8(08)        /* Bit 3: Driver Enable Polarity */
#define Z16F_UARTCTL1_BRGCTL     _HX8(04)        /* Bit 2: Baud Rate Generator Control */
#define Z16F_UARTCTL1_RDAIRQ     _HX8(02)        /* Bit 1: Receive Data Interrupt Enable */
#define Z16F_UARTCTL1_IREN       _HX8(01)        /* Bit 0: Infrared Encoder/Decoder Enable */

/* UART0/1 Mode Status/Select Register Bit Definitions ******************************/

#define Z16F_UARTMDSEL_NORMAL    _HX8(00)        /* Bits 5-7=0: Multiprocessor and Normal Mode */
#define Z16F_UARTMDSEL_FILTER    _HX8(20)        /* Bits 5-7=1: Noise Filter Control/Status */
#define Z16F_UARTMDSEL_LINP      _HX8(40)        /* Bits 5-7=2: LIN protocol Contol/Status */
#define Z16F_UARTMDSEL_HWREV     _HX8(e0)        /* Bits 5-7=7: LIN-UART Hardware Revision */
                                                 /* Bits 0-4:   Mode dependent status */

/* ESPI registers *******************************************************************/

#define Z16F_ESPI_DATA           _HX32(ffffe260) /*  8-bit: ESPI Data */
#define Z16F_ESPI_DCR            _HX32(ffffe261) /*  8-bit: ESPI Transmit Data Command */
#define Z16F_ESPI_CTL            _HX32(ffffe262) /*  8-bit: ESPI Control */
#define Z16F_ESPI_MODE           _HX32(ffffe263) /*  8-bit: ESPI Mode */
#define Z16F_ESPI_STAT           _HX32(ffffe264) /*  8-bit: ESPI Status */
#define Z16F_ESPI_STATE          _HX32(ffffe265) /*  8-bit: ESPI State */
#define Z16F_ESPI_BR             _HX32(ffffe266) /*  16-bit: ESPI Baud Rate High Byte */
#  define Z16F_ESPI_BRH          _HX32(ffffe266) /*  8-bit: ESPI Baud Rate High Byte */
#  define Z16F_ESPI_BRL          _HX32(ffffe267) /*  8-bit: ESPI Baud Rate Low Byte */

/* ESPI register bit definitions ****************************************************/

#define Z16F_ESPI_DCR_SSV        _HX8(01)        /* Bit 0: Slave Select Value */
#define Z16F_ESPI_DCR_TEOF       _HX8(02)        /* Bit 1: Transmit End of Frame */

#define Z16F_ESPI_CTL_ESPIEN0    _HX8(01)        /* Bit 0: ESPI Enable and Direction Control */
#define Z16F_ESPI_CTL_MMEN       _HX8(02)        /* Bit 1: ESPI Master Mode Enable */
#define Z16F_ESPI_CTL_WOR        _HX8(04)        /* Bit 2: Wire-OR (Open-Drain) Mode Enabled */
#define Z16F_ESPI_CTL_CLKPOL     _HX8(08)        /* Bit 3: Clock Polarity */
#define Z16F_ESPI_CTL_PHASE      _HX8(10)        /* Bit 4: Phase Select */
#define Z16F_ESPI_CTL_BRGCTL     _HX8(20)        /* Bit 5: Baud Rate Generator Control */
#define Z16F_ESPI_CTL_ESPIEN1    _HX8(40)        /* Bit 6: ESPI Enable and Direction Control */
#define Z16F_ESPI_CTL_DIRQE      _HX8(80)        /* Bit 7: Data Interrupt Request Enable */

#define Z16F_ESPI_MODE_SSPO      _HX8(01)        /* Bit 0: Slave Select Polarity */
#define Z16F_ESPI_MODE_SSIO      _HX8(02)        /* Bit 1: Slave Select I/O */
#define Z16F_ESPI_MODE_NUMBITS_SHIFT   (2)       /* Bits 2-4: Number of Data Bits Per Character */
#define Z16F_ESPI_MODE_NUMBITS_MASK    (7 << Z16F_ESPI_MODE_NUMBITS_SHIFT)
#  define Z16F_ESPI_MODE_NUMBITS_8BITS (0 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 8 bits */
#  define Z16F_ESPI_MODE_NUMBITS_1BIT  (1 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 1 bit */
#  define Z16F_ESPI_MODE_NUMBITS_2BITS (2 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 2 bits */
#  define Z16F_ESPI_MODE_NUMBITS_3BITS (3 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 3 bits */
#  define Z16F_ESPI_MODE_NUMBITS_4BITS (4 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 4 bits */
#  define Z16F_ESPI_MODE_NUMBITS_5BITS (5 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 5 bits */
#  define Z16F_ESPI_MODE_NUMBITS_6BITS (6 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 6 bits */
#  define Z16F_ESPI_MODE_NUMBITS_7BITS (7 << Z16F_ESPI_MODE_NUMBITS_SHIFT) /* 7 bits */
#define Z16F_ESPI_MODE_SSMD_SHIFT      (5)       /* Bits 5-7: SLAVE SELECT Mode */
#define Z16F_ESPI_MODE_SSMD_MASK       (7 << Z16F_ESPI_MODE_SSMD_SHIFT)
#  define Z16F_ESPI_MODE_SSMD_SPI      (0 << Z16F_ESPI_MODE_SSMD_SHIFT) /* SPI mode */
#  define Z16F_ESPI_MODE_SSMD_LPBK     (1 << Z16F_ESPI_MODE_SSMD_SHIFT) /* LOOPBACK Mode */
#  define Z16F_ESPI_MODE_SSMD_I2S      (2 << Z16F_ESPI_MODE_SSMD_SHIFT) /* I2S Mode */

#define Z16F_ESPI_STAT_SLAS      _HX8(01)        /* Bit 0: Slave Select */
#define Z16F_ESPI_STAT_TFST      _HX8(02)        /* Bit 1: Transfer Status */
#define Z16F_ESPI_STAT_RDRF      _HX8(04)        /* Bit 2: Receive Data Register Full */
#define Z16F_ESPI_STAT_ROVR      _HX8(08)        /* Bit 3: Receive Overrun */
#define Z16F_ESPI_STAT_ABT       _HX8(10)        /* Bit 4: Slave mode transaction abort */
#define Z16F_ESPI_STAT_COL       _HX8(20)        /* Bit 5: Collision */
#define Z16F_ESPI_STAT_TUND      _HX8(40)        /* Bit 6: Transmit Underrun */
#define Z16F_ESPI_STAT_TDRE      _HX8(80)        /* Bit 7: Transmit Data Register Empty */

#define Z16F_ESPI_STATE_SHIFT    (0)             /* Bits 0-5: ESPI State Machine */
#define Z16F_ESPI_STATE_MASK     (0x3f << Z16F_ESPI_STATE_SHIFT)
#  define Z16F_ESPI_STATE_IDLE   (0x00 << Z16F_ESPI_STATE_SHIFT) /* Idle */
#  define Z16F_ESPI_STATE_SWAIT  (0x01 << Z16F_ESPI_STATE_SHIFT) /* Slave Wait For SCK */
#  define Z16F_ESPI_STATE_I2SSD0 (0x02 << Z16F_ESPI_STATE_SHIFT) /* I2S slave mode start delay */
#  define Z16F_ESPI_STATE_I2SSD1 (0x03 << Z16F_ESPI_STATE_SHIFT) /* I2S slave mode start delay */
#  define Z16F_ESPI_STATE_SPIMD  (0x10 << Z16F_ESPI_STATE_SHIFT) /* SPI master mode start delay */
#  define Z16F_ESPI_STATE_I2SMD0 (0x31 << Z16F_ESPI_STATE_SHIFT) /* I2S master mode start delay */
#  define Z16F_ESPI_STATE_I2SMD1 (0x32 << Z16F_ESPI_STATE_SHIFT) /* I2S master mode start delay */
#  define Z16F_ESPI_STATE_B7RCV  (0x2e << Z16F_ESPI_STATE_SHIFT) /* Bit 7 Receive */
#  define Z16F_ESPI_STATE_B7XMT  (0x2f << Z16F_ESPI_STATE_SHIFT) /* Bit 7 Transmit */
#  define Z16F_ESPI_STATE_B6RCV  (0x2c << Z16F_ESPI_STATE_SHIFT) /* Bit 6 Receive */
#  define Z16F_ESPI_STATE_B6XMT  (0x2d << Z16F_ESPI_STATE_SHIFT) /* Bit 6 Transmit */
#  define Z16F_ESPI_STATE_B5RCV  (0x2a << Z16F_ESPI_STATE_SHIFT) /* Bit 5 Receive */
#  define Z16F_ESPI_STATE_B5XMT  (0x2b << Z16F_ESPI_STATE_SHIFT) /* Bit 5 Transmit */
#  define Z16F_ESPI_STATE_B4RCV  (0x28 << Z16F_ESPI_STATE_SHIFT) /* Bit 4 Receive */
#  define Z16F_ESPI_STATE_B4XMT  (0x29 << Z16F_ESPI_STATE_SHIFT) /* Bit 4 Transmit */
#  define Z16F_ESPI_STATE_B3RCV  (0x26 << Z16F_ESPI_STATE_SHIFT) /* Bit 3 Receive */
#  define Z16F_ESPI_STATE_B3XMT  (0x27 << Z16F_ESPI_STATE_SHIFT) /* Bit 3 Transmit */
#  define Z16F_ESPI_STATE_B2RCV  (0x24 << Z16F_ESPI_STATE_SHIFT) /* Bit 2 Receive */
#  define Z16F_ESPI_STATE_B2XMT  (0x25 << Z16F_ESPI_STATE_SHIFT) /* Bit 2 Transmit */
#  define Z16F_ESPI_STATE_B1RCV  (0x22 << Z16F_ESPI_STATE_SHIFT) /* Bit 1 Receive */
#  define Z16F_ESPI_STATE_B1XMT  (0x23 << Z16F_ESPI_STATE_SHIFT) /* Bit 1 Transmit */
#  define Z16F_ESPI_STATE_B0RCV  (0x20 << Z16F_ESPI_STATE_SHIFT) /* Bit 0 Receive */
#  define Z16F_ESPI_STATE_B0XMT  (0x21 << Z16F_ESPI_STATE_SHIFT) /* Bit 0 Transmit */
#define Z16F_ESPI_STATE_SDI      _HX8(40)        /* Bit 6: Serial Data Input */
#define Z16F_ESPI_STATE_SCKI     _HX8(80)        /* Bit 7: Serial Clock Input */

/* Timer0/1/2 registers *************************************************************/

#define Z16F_TIMER0_HL           _HX32(ffffe300) /* 16-bit: Timer 0 */
#  define Z16F_TIMER0_H          _HX32(ffffe300) /*  8-bit: Timer 0 High Byte */
#  define Z16F_TIMER0_L          _HX32(ffffe301) /*  8-bit: Timer 0 Low Byte */
#define Z16F_TIMER0_R            _HX32(ffffe302) /* 16-bit: Timer 0 Reload */
#  define Z16F_TIMER0_RH         _HX32(ffffe302) /*  8-bit: Timer 0 Reload High Byte */
# define Z16F_TIMER0_RL          _HX32(ffffe303) /*  8-bit: Timer 0 Reload Low Byte */
#define Z16F_TIMER0_PWM          _HX32(ffffe304) /* 16-bit: Timer 0 PWM */
#  define Z16F_TIMER0_PWMH       _HX32(ffffe304) /*  8-bit: Timer 0 PWM High Byte */
#  define Z16F_TIMER0_PWML       _HX32(ffffe305) /*  8-bit: Timer 0 PWM Low Byte */
#define Z16F_TIMER0_CTL          _HX32(ffffe306) /* 16-bit: Timer 0 Control */
#  define Z16F_TIMER0_CTL0       _HX32(ffffe306) /*  8-bit: Timer 0 Control 0 */
#  define Z16F_TIMER0_CTL1       _HX32(ffffe307) /*  8-bit: Timer 0 Control 1 */

#define Z16F_TIMER1_HL           _HX32(ffffe310) /* 16-bit: Timer 1 */
#  define Z16F_TIMER1_H          _HX32(ffffe310) /*  8-bit: Timer 1 High Byte */
#  define Z16F_TIMER1_L          _HX32(ffffe311) /*  8-bit: Timer 1 Low Byte */
#define Z16F_TIMER1_R            _HX32(ffffe312) /* 16-bit: Timer 1 Reload */
#  define Z16F_TIMER1_RH         _HX32(ffffe312) /*  8-bit: Timer 1 Reload High Byte */
#  define Z16F_TIMER1_RL         _HX32(ffffe313) /*  8-bit: Timer 1 Reload Low Byte */
#define Z16F_TIMER1_PWM          _HX32(ffffe314) /* 16-bit: Timer 1 PWM */
#  define Z16F_TIMER1_PWMH       _HX32(ffffe314) /*  8-bit: Timer 1 PWM High Byte */
#  define Z16F_TIMER1_PWML       _HX32(ffffe315) /*  8-bit: Timer 1 PWM Low Byte */
#define Z16F_TIMER1_CTL          _HX32(ffffe316) /* 16-bit: Timer 1 Control */
#  define Z16F_TIMER1_CTL0       _HX32(ffffe316) /*  8-bit: Timer 1 Control 0 */
#  define Z16F_TIMER1_CTL1       _HX32(ffffe317) /*  8-bit: Timer 1 Control 1 */

#define Z16F_TIMER2_HL           _HX32(ffffe320) /* 16-bit: Timer 2 */
#  define Z16F_TIMER2_H          _HX32(ffffe320) /*  8-bit: Timer 2 High Byte */
#  define Z16F_TIMER2_L          _HX32(ffffe321) /*  8-bit: Timer 2 Low Byte */
#define Z16F_TIMER2_R            _HX32(ffffe322) /* 16-bit: Timer 2 Reload */
#  define Z16F_TIMER2_RH         _HX32(ffffe322) /*  8-bit: Timer 2 Reload High Byte */
#  define Z16F_TIMER2_RL         _HX32(ffffe323) /*  8-bit: Timer 2 Reload Low Byte */
#define Z16F_TIMER2_PWM          _HX32(ffffe324) /* 16-bit: Timer 2 PWM */
#  define Z16F_TIMER2_PWMH       _HX32(ffffe324) /*  8-bit: Timer 2 PWM High Byte */
#  define Z16F_TIMER2_PWML       _HX32(ffffe325) /*  8-bit: Timer 2 PWM Low Byte */
#define Z16F_TIMER2_CTL          _HX32(ffffe326) /* 16-bit: Timer 2 Control */
#  define Z16F_TIMER2_CTL0       _HX32(ffffe326) /*  8-bit: Timer 2 Control 0 */
#  define Z16F_TIMER2_CTL1       _HX32(ffffe327) /*  8-bit: Timer 2 Control 1 */

/* Common timer0/1/2 register bit definitions ***************************************/

#define Z16F_TIMERCTL0_TMODE     _HX8(80)        /* Bit 7: Timer mode */
                                                 /* Bits 5-6: Timer configuration,
                                                  * Interpretation depends on timer mode */
#define Z16F_TIMERCTL0_RELOAD    _HX8(00)        /*   Interrupt occurs on reload or capture */
#define Z16F_TIMERCTL0_IDISABLED _HX8(40)        /*   Disabled */
#define Z16F_TIMERCTL0_IINACTIVE _HX8(40)        /*   Interrupt occurs on inactive gate edge */
#define Z16F_TIMERCTL0_ICAPTURE  _HX8(40)        /*   Interrupt occurs on capture */
#define Z16F_TIMERCTL0_IRELOAD   _HX8(60)        /*   Interrupt occurs on reload */
#define Z16F_TIMERCTL0_CASCADE   _HX8(10)        /* Bit 4: Timer is cascaded */
                                                 /* Bits 1-2: PW mode */
#define Z16F_TIMERCTL0_NODELAY   _HZ8(00)        /*    No delay */
#define Z16F_TIMERCTL0_DELAY2    _HZ8(01)        /*      2 cycle delay */
#define Z16F_TIMERCTL0_DELAY4    _HZ8(02)        /*      4 cycle delay */
#define Z16F_TIMERCTL0_DELAY8    _HZ8(03)        /*      8 cycle delay */
#define Z16F_TIMERCTL0_DELAY16   _HZ8(04)        /*     16 cycle delay */
#define Z16F_TIMERCTL0_DELAY32   _HZ8(05)        /*     32 cycle delay */
#define Z16F_TIMERCTL0_DELAY64   _HZ8(06)        /*     64 cycle delay */
#define Z16F_TIMERCTL0_DELAY128  _HZ8(07)        /*    128 cycle delay */

#define Z16F_TIMERCTL1_TEN       _HX8(80)        /* Bit 7: Timer enable */
#define Z16F_TIMERCTL1_TPOL      _HX8(40)        /* Bit 6: Input output polarity */
                                                 /* Bits 3-5: Timer prescale value */
#define Z16F_TIMERSCTL1_DIV1     _HX8(00)        /*   Divide by   1 */
#define Z16F_TIMERSCTL1_DIV2     _HX8(08)        /*   Divide by   2 */
#define Z16F_TIMERSCTL1_DIV4     _HX8(10)        /*   Divide by   4 */
#define Z16F_TIMERSCTL1_DIV8     _HX8(18)        /*   Divide by   8 */
#define Z16F_TIMERSCTL1_DIV16    _HX8(20)        /*   Divide by  16 */
#define Z16F_TIMERSCTL1_DIV32    _HX8(28)        /*   Divide by  32 */
#define Z16F_TIMERSCTL1_DIV64    _HX8(30)        /*   Divide by  64 */
#define Z16F_TIMERSCTL1_DIV128   _HX8(38)        /*   Divide by 128 */
                                                 /* Bits 0-2: Timer mode + CTL0 TMODE bit*/
#define Z16F_TIMERSCTL1_ONESHOT  _HX8(00)        /*   One shot mode (CTL0 TMOD = 0) */
#define Z16F_TIMERSCTL1_PWMDO    _HX8(00)        /*   One shot mode (CTL0 TMOD = 1) */
#define Z16F_TIMERSCTL1_CONT     _HX8(01)        /*   Continuous mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CAPRST   _HX8(01)        /*   Capture restart mode (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_COUNTER  _HX8(02)        /*   Counter mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CMPCNTR  _HX8(02)        /*   Comparator counter mode (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_PWMSO    _HX8(03)        /*   PWM single output mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_TRIGOS   _HX8(03)        /*   Triggered one shot (CTL0 TMOD = 1)*/
#define Z16F_TIMERSCTL1_CAPTURE  _HX8(04)        /*   Capture mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_COMPARE  _HX8(05)        /*   Compare mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_GATED    _HX8(06)        /*   Gated mode (CTL0 TMOD = 0)*/
#define Z16F_TIMERSCTL1_CAPCMP   _HX8(07)        /*   Capture/Compare mode (CTL0 TMOD = 0)*/

/* Register access macros ***********************************************************/

#ifndef __ASSEMBLY__
#  define getreg8(a)             (*(uint8_t volatile _Near*)(a))
#  define putreg8(v,a)           (*(uint8_t volatile _Near*)(a) = (v))
#  define getreg16(a)            (*(uint16_t volatile _Near*)(a))
#  define putreg16(v,a)          (*(uint16_t volatile _Near*)(a) = (v))
#  define getreg32(a)            (*(uint32_t volatile _Near*)(a))
#  define putreg32(v,a)          (*(uint32_t volatile _Near*)(a) = (v))
#endif /* __ASSEMBLY__ */

/************************************************************************************
 * Public Function Prototypes
 ************************************************************************************/

#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/* The following two routines are called from the low-level reset logic.  z16f_lowinit()
 * must be provided by the board-specific logic; z16f_lowuartinit() is called only if
 * debugging support for up_lowputc (or getc) is enabled.
 */

void z16f_lowinit(void);
#if defined(CONFIG_Z16_LOWPUTC) || defined(CONFIG_Z16_LOWGETC)
void z16f_lowuartinit(void);
#endif

/* This function handles Z16F system exceptions */

void z16f_sysexec(FAR chipreg_t *regs);

/* Entry point to reset the processor */

void z16f_reset(void);

/* The following must be provided by board-specific logic that uses the ZNeo
 * ESPI
 */

#ifdef CONFIG_Z16F_ESPI
/* Select an SPI device (see include/nuttx/spi/spi.h) */

void z16f_espi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);

/* Provide SPI device status (see include/nuttx/spi/spi.h) */

uint8_t z16f_espi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);

/* Select CMD/DATA options (often used with LCD devices) */

#ifdef CONFIG_SPI_CMDDATA
int z16f_espi_cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
#endif
#endif

#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */

#endif  /* __ARCH_Z16_SRC_Z16F_CHIP_H */