1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
|
README
======
This directory contains the port of NuttX to the pcDuino v1 board
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
I have not compared these boards in detail, but I believe that the
differences are cosmetic. This port was developed on the v1 board, but
the others may be compatible:
pcDuino Lite (See http://www.pcduino.com/?page_id=1707)
ITEMS DETAILS
-------------------- ---------------------------------------------------
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
DRAM 512B
Onboard Storage NO Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
Extension Interface 2.54mm Headers
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
Power 5V, 2000mA
Overall Size 125mm X 52mm
pcDuino v1 (http://www.pcduino.com/?page_id=12)
ITEMS DETAILS
-------------------- ---------------------------------------------------
Items Details
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
* DRAM 1GB
* Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
Extension Interface 2.54mm Headers
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
Power 5V, 2000mA
Overall Size 125mm X 52mm
pcDuino v2 (http://www.pcduino.com/?page_id=1618)
ITEMS DETAILS
-------------------- ---------------------------------------------------
Items Details
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
DRAM 1GB
Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
* Extension Interface Arduino Headers
* Network interface 10/100Mbps RJ45 and on-board WiFi module
Power 5V, 2000mA
Overall Size 125mm X 52mm
Main features of the Allwinner A10
(See http://www.allwinnertech.com/en/product/a10.html):
CPU
- ARM Cortex�-A8
- 32KB I-Cache
- 32KB D-Cache
- 256KB L2 Cache
GPU
- ARM Mali-400
Video
- UHD 2160P video decoding
- 3D video decoding
- Support various video decoding formats, including VP8, AVS, H. 264
MVC, VC-1, MPEG-1,2,4, etc
- H.264 HP video encoding up to 1080p @ 30 fps or dual-channel 720p @ 30
fps
Display
- Multi-channel HD display
- Integrated HDMI 1.4
- YPbPr, CVBS, VGA
- Multiple LCD interfaces, including CPU, RGB, LVDS up to Full HD
Memory
- 32-bit DDR2/DDR3
- Memory capacity up to 16G bits
- SLC/MLC/TLC/DDR NAND
- 8 flash chips, 64-bit ECC
Memory capacity up to 64GB
Support NAND of 5xnm, 4xnm, 3xnm, 2xnm, etc
Support NAND of Samsung, Toshiba, Hynix, etc
Boot Devices
- NAND Flash
- SPI NOR Flash
- SD Card
- USB
Contents
========
- pcDuino v1 Connectors
- Serial Console
- LEDs
- Buttons
- Booting NuttX from an SD card
pcDuino v1 Connectors
=====================
TOP
---
- HDMI
- RJ45
- USB Host (2)
- J11
1. UART-Rx / GPIO0 UART2_RX
2. UART-Tx / GPIO1 UART2_TX
3. GPIO3 / GPIO2 GPIO2
4. PWM0 / GPIO3 PWM0
5. GPIO4 GPIO3
6. PWM1 / GPIO5 PWM1
7. PWM2 /GPIO6 PWM2
8. GPIO7 GPIO4
- J8
1. GPIO8 GPIO5
2. PWM3 / GPIO9 PWM3
3. SPI_CS / GPIO10 / PWM4 SPI0_CS
4. SPI_MOSI / GPIO11 / PWM5 SPI0_MOSI
5. SPI_MISO / GPIO12 SPI0_MISO
6. SPI_CLK / GPIO13 SPI0_CLK
7. Gnd
8. ARef
9. I2C-SDA TWI2_SDA
10. I2C-SCK TWI2_SCK
- J12
1. ADC0
2. ADC1
3. ADC2
4. ADC3
5. ADC4
6. ADC5
- J9
1. 5V
2. Gnd
3. Gnd
4. 5V
5. 3.3V
6. Reset
7. 5V
8. NC
- J5 Debug Port
1. Rx UART0-RX
2. Gnd GND
2. Tx UART0-TX
- J6 SPI2
1. SPI2_MISO
2. DC_5V
3. SPI2_CLK
4. SPI2_MOSI
5. RESET#
6. GND
- J7 SPI0
1. SPI0_MISO
2. DC_5V
3. SPI0_CLK
4. SPI0_MOSI
5. RESET#
6. GND
- J10
1. GPIO6
2. GPIO8
3. GPIO7
4. GPIO9
Bottom
------
- USB OTG
- DC Power IN (USB)
- microSD card slot
Serial Console
==============
1. UART0 is available on J5 Debug Port.
J15 Pin 1 Rx UART0-RX UART0_RX/IR1_RX/PB23
J15 Pin 2 Tx UART0-TX UART0_TX/IR1_TX/PB22
2. UART2 is available on J11
J11 Pin1 UART-Rx / GPIO0 UART2_RX EINT31/SPI1_MISO/UART2_RX/PI19
J11 Pin2 UART-Tx / GPIO1 UART2_TX EINT30/SPI1_MOSI/UART2_TX/PI18
By default, the serial console will be provided on UART0 in all of these
configurations.
LEDs
====
The pcDuino v1 has four green LEDs; three can be controlled from software.
Two are tied to ground and, hence, illuminated by driving the output pins
to a high value:
1. LED1 SPI0_CLK SPI0_CLK/UART5_RX/EINT23/PI11
2. LED5 IPSOUT From the PMU (not controllable by software)
And two are pull high and, hence, illuminated by grounding the output:
3. LED3 RX_LED LCD1_D16/ATAD12/KP_IN6/SMC_DET/EINT16/CSI1_D16/PH16
4. LED4 TX_LED LCD1_D15/ATAD11/KP_IN5/SMC_VPPPP/EINT15/CSI1_D15/PH15
These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
defined. In that case, the usage by the board port is defined in
include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
events as follows:
SYMBOL Meaning LED state
LED1 LED3 LED4
----------------- ----------------------- ---- ---- ------------
LED_STARTED NuttX has been started ON OFF OFF
LED_HEAPALLOCATE Heap has been allocated OFF ON OFF
LED_IRQSENABLED Interrupts enabled ON ON OFF
LED_STACKCREATED Idle stack created ON ON OFF
LED_INIRQ In an interrupt N/C N/C Soft glow
LED_SIGNAL In a signal handler N/C N/C Soft glow
LED_ASSERTION An assertion failed N/C N/C Soft glow
LED_PANIC The system has crashed N/C N/C 2Hz Flashing
LED_IDLE MCU is is sleep mode Not used
After booting, LED1 and 3 are not longer used by the system and can be used for
other purposes by the application (Of course, all LEDs are available to the
application if CONFIG_ARCH_LEDS is not defined.
Buttons
=======
There are a total of five switches on-board. All pulled high and, hence,
will be sensed as low when closed.
SW1 Reset (not available to software)
SW2 UBOOT UBOOT_SEL (?)
SW3 Key_Back LCD1_D17/ATAD13/KP_IN7/SMC_VCCEN/EINT17/CSI1_D17/PH17
SW4 Key_Home LCD1_D18/ATAD14/KP_OUT0/SMC_SLK/EINT18/CSI1_D18/PH18
SW5 Key_Menu LCD1_D19/ATAD15/KP_OUT1/SMC_SDA/EINT19/CSI1_D19/PH19
Booting NuttX from an SD card
=============================
These are the steps to get U-Boot booting from SD Card:
$ git clone https://github.com/yuq/u-boot-sunxi.git
$ cd u-boot-sunxi
$ make pcduino CROSS_COMPILE=arm-linux-gnueabi-
$ sudo dd if=./spl/sunxi-spl.bin of=/dev/sdb bs=1024 seek=8
$ sudo dd if=u-boot.bin of=/dev/sdb bs=1024 seek=32
We need to replace u-boot.bin by nuttx.bin.
Reference: https://www.olimex.com/wiki/Bare_Metal_programming_A13#Stand_alone_program_running_with_uboot
|
