diff options
Diffstat (limited to 'src/google/protobuf/descriptor.proto')
-rw-r--r-- | src/google/protobuf/descriptor.proto | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/src/google/protobuf/descriptor.proto b/src/google/protobuf/descriptor.proto new file mode 100644 index 00000000..13d94780 --- /dev/null +++ b/src/google/protobuf/descriptor.proto @@ -0,0 +1,286 @@ +// Protocol Buffers - Google's data interchange format +// Copyright 2008 Google Inc. +// http://code.google.com/p/protobuf/ +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +// Author: kenton@google.com (Kenton Varda) +// Based on original Protocol Buffers design by +// Sanjay Ghemawat, Jeff Dean, and others. +// +// The messages in this file describe the definitions found in .proto files. +// A valid .proto file can be translated directly to a FileDescriptorProto +// without any other information (e.g. without reading its imports). + + + +package google.protobuf; +option java_package = "com.google.protobuf"; +option java_outer_classname = "DescriptorProtos"; + +// descriptor.proto must be optimized for speed because reflection-based +// algorithms don't work during bootstrapping. +option optimize_for = SPEED; + +// Describes a complete .proto file. +message FileDescriptorProto { + optional string name = 1; // file name, relative to root of source tree + optional string package = 2; // e.g. "foo", "foo.bar", etc. + + // Names of files imported by this file. + repeated string dependency = 3; + + // All top-level definitions in this file. + repeated DescriptorProto message_type = 4; + repeated EnumDescriptorProto enum_type = 5; + repeated ServiceDescriptorProto service = 6; + repeated FieldDescriptorProto extension = 7; + + optional FileOptions options = 8; +} + +// Describes a message type. +message DescriptorProto { + optional string name = 1; + + repeated FieldDescriptorProto field = 2; + repeated FieldDescriptorProto extension = 6; + + repeated DescriptorProto nested_type = 3; + repeated EnumDescriptorProto enum_type = 4; + + message ExtensionRange { + optional int32 start = 1; + optional int32 end = 2; + } + repeated ExtensionRange extension_range = 5; + + optional MessageOptions options = 7; +} + +// Describes a field within a message. +message FieldDescriptorProto { + enum Type { + // 0 is reserved for errors. + // Order is weird for historical reasons. + TYPE_DOUBLE = 1; + TYPE_FLOAT = 2; + TYPE_INT64 = 3; // Not ZigZag encoded. Negative numbers + // take 10 bytes. Use TYPE_SINT64 if negative + // values are likely. + TYPE_UINT64 = 4; + TYPE_INT32 = 5; // Not ZigZag encoded. Negative numbers + // take 10 bytes. Use TYPE_SINT32 if negative + // values are likely. + TYPE_FIXED64 = 6; + TYPE_FIXED32 = 7; + TYPE_BOOL = 8; + TYPE_STRING = 9; + TYPE_GROUP = 10; // Tag-delimited aggregate. + TYPE_MESSAGE = 11; // Length-delimited aggregate. + + // New in version 2. + TYPE_BYTES = 12; + TYPE_UINT32 = 13; + TYPE_ENUM = 14; + TYPE_SFIXED32 = 15; + TYPE_SFIXED64 = 16; + TYPE_SINT32 = 17; // Uses ZigZag encoding. + TYPE_SINT64 = 18; // Uses ZigZag encoding. + }; + + enum Label { + // 0 is reserved for errors + LABEL_OPTIONAL = 1; + LABEL_REQUIRED = 2; + LABEL_REPEATED = 3; + // TODO(sanjay): Should we add LABEL_MAP? + }; + + optional string name = 1; + optional int32 number = 3; + optional Label label = 4; + + // If type_name is set, this need not be set. If both this and type_name + // are set, this must be either TYPE_ENUM or TYPE_MESSAGE. + optional Type type = 5; + + // For message and enum types, this is the name of the type. If the name + // starts with a '.', it is fully-qualified. Otherwise, C++-like scoping + // rules are used to find the type (i.e. first the nested types within this + // message are searched, then within the parent, on up to the root + // namespace). + optional string type_name = 6; + + // For extensions, this is the name of the type being extended. It is + // resolved in the same manner as type_name. + optional string extendee = 2; + + // For numeric types, contains the original text representation of the value. + // For booleans, "true" or "false". + // For strings, contains the default text contents (not escaped in any way). + // For bytes, contains the C escaped value. All bytes >= 128 are escaped. + // TODO(kenton): Base-64 encode? + optional string default_value = 7; + + optional FieldOptions options = 8; +} + +// Describes an enum type. +message EnumDescriptorProto { + optional string name = 1; + + repeated EnumValueDescriptorProto value = 2; + + optional EnumOptions options = 3; +} + +// Describes a value within an enum. +message EnumValueDescriptorProto { + optional string name = 1; + optional int32 number = 2; + + optional EnumValueOptions options = 3; +} + +// Describes a service. +message ServiceDescriptorProto { + optional string name = 1; + repeated MethodDescriptorProto method = 2; + + optional ServiceOptions options = 3; +} + +// Describes a method of a service. +message MethodDescriptorProto { + optional string name = 1; + + // Input and output type names. These are resolved in the same way as + // FieldDescriptorProto.type_name, but must refer to a message type. + optional string input_type = 2; + optional string output_type = 3; + + optional MethodOptions options = 4; +} + +// =================================================================== +// Options + +// Each of the definitions above may have "options" attached. These are +// just annotations which may cause code to be generated slightly differently +// or may contain hints for code that manipulates protocol messages. + +// TODO(kenton): Allow extensions to options. + +message FileOptions { + + // Sets the Java package where classes generated from this .proto will be + // placed. By default, the proto package is used, but this is often + // inappropriate because proto packages do not normally start with backwards + // domain names. + optional string java_package = 1; + + + // If set, all the classes from the .proto file are wrapped in a single + // outer class with the given name. This applies to both Proto1 + // (equivalent to the old "--one_java_file" option) and Proto2 (where + // a .proto always translates to a single class, but you may want to + // explicitly choose the class name). + optional string java_outer_classname = 8; + + // If set true, then the Java code generator will generate a separate .java + // file for each top-level message, enum, and service defined in the .proto + // file. Thus, these types will *not* be nested inside the outer class + // named by java_outer_classname. However, the outer class will still be + // generated to contain the file's getDescriptor() method as well as any + // top-level extensions defined in the file. + optional bool java_multiple_files = 10 [default=false]; + + // Generated classes can be optimized for speed or code size. + enum OptimizeMode { + SPEED = 1; // Generate complete code for parsing, serialization, etc. + CODE_SIZE = 2; // Use ReflectionOps to implement these methods. + } + optional OptimizeMode optimize_for = 9 [default=CODE_SIZE]; +} + +message MessageOptions { + // Set true to use the old proto1 MessageSet wire format for extensions. + // This is provided for backwards-compatibility with the MessageSet wire + // format. You should not use this for any other reason: It's less + // efficient, has fewer features, and is more complicated. + // + // The message must be defined exactly as follows: + // message Foo { + // option message_set_wire_format = true; + // extensions 4 to max; + // } + // Note that the message cannot have any defined fields; MessageSets only + // have extensions. + // + // All extensions of your type must be singular messages; e.g. they cannot + // be int32s, enums, or repeated messages. + // + // Because this is an option, the above two restrictions are not enforced by + // the protocol compiler. + optional bool message_set_wire_format = 1 [default=false]; +} + +message FieldOptions { + // The ctype option instructs the C++ code generator to use a different + // representation of the field than it normally would. See the specific + // options below. This option is not yet implemented in the open source + // release -- sorry, we'll try to include it in a future version! + optional CType ctype = 1; + enum CType { + CORD = 1; + + STRING_PIECE = 2; + } + + // EXPERIMENTAL. DO NOT USE. + // For "map" fields, the name of the field in the enclosed type that + // is the key for this map. For example, suppose we have: + // message Item { + // required string name = 1; + // required string value = 2; + // } + // message Config { + // repeated Item items = 1 [experimental_map_key="name"]; + // } + // In this situation, the map key for Item will be set to "name". + // TODO: Fully-implement this, then remove the "experimental_" prefix. + optional string experimental_map_key = 9; +} + +message EnumOptions { +} + +message EnumValueOptions { +} + +message ServiceOptions { + + // Note: Field numbers 1 through 32 are reserved for Google's internal RPC + // framework. We apologize for hoarding these numbers to ourselves, but + // we were already using them long before we decided to release Protocol + // Buffers. +} + +message MethodOptions { + + // Note: Field numbers 1 through 32 are reserved for Google's internal RPC + // framework. We apologize for hoarding these numbers to ourselves, but + // we were already using them long before we decided to release Protocol + // Buffers. +} |