Revert "[SPARK-8706] [PYSPARK] [PROJECT INFRA] Add pylint checks to PySpark"

This reverts commit 9b62e9375f032548d386aec7468e3d0f7c6da7b2.

1 files changed, 0 insertions, 404 deletions

diff --git a/pylintrc b/pylintrc
deleted file mode 100644
index 0617759603..0000000000
--- a/pylintrc
+++ /dev/null
@@ -1,404 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-[MASTER]
-
-# Specify a configuration file.
-#rcfile=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Profiled execution.
-profile=no
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=pyspark.heapq3
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# List of plugins (as comma separated values of python modules names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Use multiple processes to speed up Pylint.
-jobs=1
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code
-extension-pkg-whitelist=
-
-# Allow optimization of some AST trees. This will activate a peephole AST
-# optimizer, which will apply various small optimizations. For instance, it can
-# be used to obtain the result of joining multiple strings with the addition
-# operator. Joining a lot of strings can lead to a maximum recursion error in
-# Pylint and this flag can prevent that. It has one side effect, the resulting
-# AST will be different than the one from reality.
-optimize-ast=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
-confidence=
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time. See also the "--disable" option for examples.
-enable=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once).You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use"--disable=all --enable=classes
-# --disable=W"
-
-# These errors are arranged in order of number of warning given in pylint.
-# If you would like to improve the code quality of pyspark, remove any of these disabled errors
-# run ./dev/lint-python and see if the errors raised by pylint can be fixed.
-
-disable=invalid-name,missing-docstring,protected-access,unused-argument,no-member,unused-wildcard-import,redefined-builtin,too-many-arguments,unused-variable,too-few-public-methods,bad-continuation,duplicate-code,redefined-outer-name,too-many-ancestors,import-error,superfluous-parens,unused-import,line-too-long,no-name-in-module,unnecessary-lambda,import-self,no-self-use,unidiomatic-typecheck,fixme,too-many-locals,cyclic-import,too-many-branches,bare-except,wildcard-import,dangerous-default-value,broad-except,too-many-public-methods,deprecated-lambda,anomalous-backslash-in-string,too-many-lines,reimported,too-many-statements,bad-whitespace,unpacking-non-sequence,too-many-instance-attributes,abstract-method,old-style-class,global-statement,attribute-defined-outside-init,arguments-differ,undefined-all-variable,no-init,useless-else-on-loop,super-init-not-called,notimplemented-raised,too-many-return-statements,pointless-string-statement,global-variable-undefined,bad-classmethod-argument,too-many-format-args,parse-error,no-self-argument,pointless-statement,undefined-variable
-
-
-[REPORTS]
-
-# Set the output format. Available formats are text, parseable, colorized, msvs
-# (visual studio) and html. You can also give a reporter class, eg
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Put messages in a separate file for each module / package specified on the
-# command line instead of printing them on stdout. Reports (if any) will be
-# written in a file name "pylint_global.[txt|html]".
-files-output=no
-
-# Tells whether to display a full report or only the messages
-reports=no
-
-# Python expression which should return a note less than 10 (10 is the highest
-# note). You have access to the variables errors warning, statement which
-# respectively contain the number of errors / warnings messages and the total
-# number of statements analyzed. This is used by the global evaluation report
-# (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Add a comment according to your evaluation note. This is used by the global
-# evaluation report (RP0004).
-comment=no
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details
-#msg-template=
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,XXX,TODO
-
-
-[BASIC]
-
-# Required attributes for module, separated by a comma
-required-attributes=
-
-# List of builtins function names that should not be used, separated by a comma
-bad-functions=
-
-# Good variable names which should always be accepted, separated by a comma
-good-names=i,j,k,ex,Run,_
-
-# Bad variable names which should always be refused, separated by a comma
-bad-names=baz,toto,tutu,tata
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Include a hint for the correct naming format with invalid-name
-include-naming-hint=no
-
-# Regular expression matching correct function names
-function-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Naming hint for function names
-function-name-hint=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression matching correct variable names
-variable-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Naming hint for variable names
-variable-name-hint=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression matching correct constant names
-const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
-# Naming hint for constant names
-const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
-# Regular expression matching correct attribute names
-attr-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Naming hint for attribute names
-attr-name-hint=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression matching correct argument names
-argument-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Naming hint for argument names
-argument-name-hint=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression matching correct class attribute names
-class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Naming hint for class attribute names
-class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Regular expression matching correct inline iteration names
-inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
-
-# Naming hint for inline iteration names
-inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
-
-# Regular expression matching correct class names
-class-rgx=[A-Z_][a-zA-Z0-9]+$
-
-# Naming hint for class names
-class-name-hint=[A-Z_][a-zA-Z0-9]+$
-
-# Regular expression matching correct module names
-module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Naming hint for module names
-module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Regular expression matching correct method names
-method-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Naming hint for method names
-method-name-hint=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=__.*__
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-
-[FORMAT]
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-# List of optional constructs for which whitespace checking is disabled
-no-space-check=trailing-comma,dict-separator
-
-# Maximum number of lines in a module
-max-module-lines=1000
-
-# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-
-[SIMILARITIES]
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-
-[VARIABLES]
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# A regular expression matching the name of dummy variables (i.e. expectedly
-# not used).
-dummy-variables-rgx=_$|dummy
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid to define new builtins when possible.
-additional-builtins=
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,_cb
-
-
-[SPELLING]
-
-# Spelling dictionary name. Available dictionaries: none. To make it working
-# install python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to indicated private dictionary in
-# --spelling-private-dict-file option instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[LOGGING]
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format
-logging-modules=logging
-
-
-[TYPECHECK]
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis
-ignored-modules=
-
-# List of classes names for which member attributes should not be checked
-# (useful for classes with attributes dynamically set).
-ignored-classes=SQLObject
-
-# When zope mode is activated, add a predefined set of Zope acquired attributes
-# to generated-members.
-zope=no
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E0201 when accessed. Python regular
-# expressions are accepted.
-generated-members=REQUEST,acl_users,aq_parent
-
-
-[CLASSES]
-
-# List of interface methods to ignore, separated by a comma. This is used for
-# instance to not check methods defines in Zope's Interface base class.
-ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,__new__,setUp
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,_fields,_replace,_source,_make
-
-
-[IMPORTS]
-
-# Deprecated modules which should not be used, separated by a comma
-deprecated-modules=regsub,TERMIOS,Bastion,rexec
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled)
-import-graph=
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled)
-ext-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled)
-int-import-graph=
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method
-max-args=5
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore
-ignored-argument-names=_.*
-
-# Maximum number of locals for function / method body
-max-locals=15
-
-# Maximum number of return / yield for function / method body
-max-returns=6
-
-# Maximum number of branch for function / method body
-max-branches=12
-
-# Maximum number of statements in function / method body
-max-statements=50
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "Exception"
-overgeneral-exceptions=Exception