/****************************************************************************
*
* Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file drv_rc_input.h
*
* R/C input interface.
*/
#ifndef _DRV_RC_INPUT_H
#define _DRV_RC_INPUT_H
#include <stdint.h>
#include <sys/ioctl.h>
#include "drv_orb_dev.h"
/**
* Path for the default R/C input device.
*
* Note that on systems with more than one R/C input path (e.g.
* PX4FMU with PX4IO connected) there may be other devices that
* respond to this protocol.
*
* Input data may be obtained by subscribing to the input_rc
* object, or by poll/reading from the device.
*/
#define RC_INPUT0_DEVICE_PATH "/dev/input_rc0"
/**
* Maximum number of R/C input channels in the system. S.Bus has up to 18 channels.
*/
#define RC_INPUT_MAX_CHANNELS 18
/**
* Maximum RSSI value
*/
#define RC_INPUT_RSSI_MAX 100
/**
* @addtogroup topics
* @{
*/
/**
* Input signal type, value is a control position from zero to 100
* percent.
*/
typedef uint16_t rc_input_t;
enum RC_INPUT_SOURCE {
RC_INPUT_SOURCE_UNKNOWN = 0,
RC_INPUT_SOURCE_PX4FMU_PPM,
RC_INPUT_SOURCE_PX4IO_PPM,
RC_INPUT_SOURCE_PX4IO_SPEKTRUM,
RC_INPUT_SOURCE_PX4IO_SBUS,
RC_INPUT_SOURCE_PX4IO_ST24
};
/**
* R/C input status structure.
*
* Published to input_rc, may also be published to other names depending
* on the board involved.
*/
struct rc_input_values {
/** publication time */
uint64_t timestamp_publication;
/** last valid reception time */
uint64_t timestamp_last_signal;
/** number of channels actually being seen */
uint32_t channel_count;
/** receive signal strength indicator (RSSI): < 0: Undefined, 0: no signal, 255: full reception */
int32_t rssi;
/**
* explicit failsafe flag: true on TX failure or TX out of range , false otherwise.
* Only the true state is reliable, as there are some (PPM) receivers on the market going
* into failsafe without telling us explicitly.
* */
bool rc_failsafe;
/**
* RC receiver connection status: True,if no frame has arrived in the expected time, false otherwise.
* True usally means that the receiver has been disconnected, but can also indicate a radio link loss on "stupid" systems.
* Will remain false, if a RX with failsafe option continues to transmit frames after a link loss.
* */
bool rc_lost;
/**
* Number of lost RC frames.
* Note: intended purpose: observe the radio link quality if RSSI is not available
* This value must not be used to trigger any failsafe-alike funtionality.
* */
uint16_t rc_lost_frame_count;
/**
* Number of total RC frames.
* Note: intended purpose: observe the radio link quality if RSSI is not available
* This value must not be used to trigger any failsafe-alike funtionality.
* */
uint16_t rc_total_frame_count;
/**
* Length of a single PPM frame.
* Zero for non-PPM systems
*/
uint16_t rc_ppm_frame_length;
/** Input source */
enum RC_INPUT_SOURCE input_source;
/** measured pulse widths for each of the supported channels */
rc_input_t values[RC_INPUT_MAX_CHANNELS];
};
/**
* @}
*/
/*
* ObjDev tag for R/C inputs.
*/
ORB_DECLARE(input_rc);
#define _RC_INPUT_BASE 0x2b00
/** Fetch R/C input values into (rc_input_values *)arg */
#define RC_INPUT_GET _IOC(_RC_INPUT_BASE, 0)
/** Enable RSSI input via ADC */
#define RC_INPUT_ENABLE_RSSI_ANALOG _IOC(_RC_INPUT_BASE, 1)
/** Enable RSSI input via PWM signal */
#define RC_INPUT_ENABLE_RSSI_PWM _IOC(_RC_INPUT_BASE, 2)
#endif /* _DRV_RC_INPUT_H */