/****************************************************************************
*
* Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
* Author: Simon Wilks <sjwilks@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file hott_sensors.c
* @author Simon Wilks <sjwilks@gmail.com>
*
* Graupner HoTT sensor driver implementation.
*
* Poll any sensors connected to the PX4 via the telemetry wire.
*/
#include <fcntl.h>
#include <nuttx/config.h>
#include <poll.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <systemlib/err.h>
#include <systemlib/systemlib.h>
#include "../comms.h"
#include "../messages.h"
static int thread_should_exit = false; /**< Deamon exit flag */
static int thread_running = false; /**< Deamon status flag */
static int deamon_task; /**< Handle of deamon task / thread */
static const char daemon_name[] = "hott_sensors";
static const char commandline_usage[] = "usage: hott_sensor start|status|stop [-d <device>]";
/**
* Deamon management function.
*/
__EXPORT int hott_sensors_main(int argc, char *argv[]);
/**
* Mainloop of daemon.
*/
int hott_sensors_thread_main(int argc, char *argv[]);
static int recv_data(int uart, uint8_t *buffer, size_t *size, uint8_t *id);
static int send_poll(int uart, uint8_t *buffer, size_t size);
int
send_poll(int uart, uint8_t *buffer, size_t size)
{
for (size_t i = 0; i < size; i++) {
write(uart, &buffer[i], sizeof(buffer[i]));
/* Sleep before sending the next byte. */
usleep(POST_WRITE_DELAY_IN_USECS);
}
/* A hack the reads out what was written so the next read from the receiver doesn't get it. */
/* TODO: Fix this!! */
uint8_t dummy[size];
read(uart, &dummy, size);
return OK;
}
int
recv_data(int uart, uint8_t *buffer, size_t *size, uint8_t *id)
{
usleep(5000);
static const int timeout_ms = 1000;
struct pollfd fds[] = { { .fd = uart, .events = POLLIN } };
// XXX should this poll be inside the while loop???
if (poll(fds, 1, timeout_ms) > 0) {
int i = 0;
bool stop_byte_read = false;
while (true) {
read(uart, &buffer[i], sizeof(buffer[i]));
//printf("[%d]: %d\n", i, buffer[i]);
if (stop_byte_read) {
// XXX process checksum
*size = ++i;
return OK;
}
// XXX can some other field not have the STOP BYTE value?
if (buffer[i] == STOP_BYTE) {
*id = buffer[1];
stop_byte_read = true;
}
i++;
}
}
return ERROR;
}
int
hott_sensors_thread_main(int argc, char *argv[])
{
warnx("starting");
thread_running = true;
const char *device = "/dev/ttyS2"; /**< Default telemetry port: USART5 */
/* read commandline arguments */
for (int i = 0; i < argc && argv[i]; i++) {
if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { //device set
if (argc > i + 1) {
device = argv[i + 1];
} else {
thread_running = false;
errx(1, "missing parameter to -d\n%s", commandline_usage);
}
}
}
/* enable UART, writes potentially an empty buffer, but multiplexing is disabled */
struct termios uart_config_original;
const int uart = open_uart(device, &uart_config_original);
if (uart < 0) {
errx(1, "Failed opening HoTT UART, exiting.");
thread_running = false;
}
uint8_t buffer[MESSAGE_BUFFER_SIZE];
size_t size = 0;
uint8_t id = 0;
bool connected = true;
while (!thread_should_exit) {
// Currently we only support a General Air Module sensor.
build_gam_request(&buffer, &size);
send_poll(uart, buffer, size);
recv_data(uart, &buffer, &size, &id);
// Determine which moduel sent it and process accordingly.
if (id == GAM_SENSOR_ID) {
//warnx("extract");
extract_gam_message(buffer);
} else {
warnx("Unknown sensor ID received: %d", id);
}
}
warnx("exiting");
close(uart);
thread_running = false;
return 0;
}
/**
* Process command line arguments and start the daemon.
*/
int
hott_sensors_main(int argc, char *argv[])
{
if (argc < 1) {
errx(1, "missing command\n%s", commandline_usage);
}
if (!strcmp(argv[1], "start")) {
if (thread_running) {
warnx("deamon already running");
exit(0);
}
thread_should_exit = false;
deamon_task = task_spawn(daemon_name,
SCHED_DEFAULT,
SCHED_PRIORITY_MAX - 40,
2048,
hott_sensors_thread_main,
(argv) ? (const char **)&argv[2] : (const char **)NULL);
exit(0);
}
if (!strcmp(argv[1], "stop")) {
thread_should_exit = true;
exit(0);
}
if (!strcmp(argv[1], "status")) {
if (thread_running) {
warnx("daemon is running");
} else {
warnx("daemon not started");
}
exit(0);
}
errx(1, "unrecognized command\n%s", commandline_usage);
}
