/****************************************************************************
*
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file gyro_calibration.c
* Gyroscope calibration routine
*/
#include "gyro_calibration.h"
#include "commander_helper.h"
#include <stdio.h>
#include <fcntl.h>
#include <poll.h>
#include <math.h>
#include <drivers/drv_hrt.h>
#include <uORB/topics/sensor_combined.h>
#include <drivers/drv_gyro.h>
#include <mavlink/mavlink_log.h>
#include <systemlib/param/param.h>
#include <systemlib/err.h>
void do_gyro_calibration(int mavlink_fd)
{
mavlink_log_info(mavlink_fd, "gyro calibration starting, hold still");
const int calibration_count = 5000;
int sub_sensor_combined = orb_subscribe(ORB_ID(sensor_combined));
struct sensor_combined_s raw;
int calibration_counter = 0;
float gyro_offset[3] = {0.0f, 0.0f, 0.0f};
/* set offsets to zero */
int fd = open(GYRO_DEVICE_PATH, 0);
struct gyro_scale gscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale_null))
warn("WARNING: failed to set scale / offsets for gyro");
close(fd);
while (calibration_counter < calibration_count) {
/* wait blocking for new data */
struct pollfd fds[1] = { { .fd = sub_sensor_combined, .events = POLLIN } };
int poll_ret = poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(sensor_combined), sub_sensor_combined, &raw);
gyro_offset[0] += raw.gyro_rad_s[0];
gyro_offset[1] += raw.gyro_rad_s[1];
gyro_offset[2] += raw.gyro_rad_s[2];
calibration_counter++;
} else if (poll_ret == 0) {
/* any poll failure for 1s is a reason to abort */
mavlink_log_info(mavlink_fd, "gyro calibration aborted, retry");
return;
}
}
gyro_offset[0] = gyro_offset[0] / calibration_count;
gyro_offset[1] = gyro_offset[1] / calibration_count;
gyro_offset[2] = gyro_offset[2] / calibration_count;
if (isfinite(gyro_offset[0]) && isfinite(gyro_offset[1]) && isfinite(gyro_offset[2])) {
if (param_set(param_find("SENS_GYRO_XOFF"), &(gyro_offset[0]))
|| param_set(param_find("SENS_GYRO_YOFF"), &(gyro_offset[1]))
|| param_set(param_find("SENS_GYRO_ZOFF"), &(gyro_offset[2]))) {
mavlink_log_critical(mavlink_fd, "Setting gyro offsets failed!");
}
/* set offsets to actual value */
fd = open(GYRO_DEVICE_PATH, 0);
struct gyro_scale gscale = {
gyro_offset[0],
1.0f,
gyro_offset[1],
1.0f,
gyro_offset[2],
1.0f,
};
if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale))
warn("WARNING: failed to set scale / offsets for gyro");
close(fd);
/* auto-save to EEPROM */
int save_ret = param_save_default();
if (save_ret != 0) {
warn("WARNING: auto-save of params to storage failed");
}
// char buf[50];
// sprintf(buf, "cal: x:%8.4f y:%8.4f z:%8.4f", (double)gyro_offset[0], (double)gyro_offset[1], (double)gyro_offset[2]);
// mavlink_log_info(mavlink_fd, buf);
mavlink_log_info(mavlink_fd, "gyro calibration done");
tune_positive();
/* third beep by cal end routine */
} else {
mavlink_log_info(mavlink_fd, "gyro calibration FAILED (NaN)");
}
close(sub_sensor_combined);
}
