/****************************************************************************
*
* Copyright (C) 2012-2013 PX4 Development Team. All rights reserved.
* Author: Tobias Naegeli <naegelit@student.ethz.ch>
* Lorenz Meier <lm@inf.ethz.ch>
* Anton Babushkin <anton.babushkin@me.com>
* Julian Oes <joes@student.ethz.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file multirotor_rate_control.c
*
* Implementation of rate controller for multirotors.
*
* @author Tobias Naegeli <naegelit@student.ethz.ch>
* @author Lorenz Meier <lm@inf.ethz.ch>
* @author Anton Babushkin <anton.babushkin@me.com>
* @author Julian Oes <joes@student.ethz.ch>
*/
#include "multirotor_rate_control.h"
#include <stdio.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <float.h>
#include <math.h>
#include <systemlib/pid/pid.h>
#include <systemlib/param/param.h>
#include <systemlib/err.h>
#include <drivers/drv_hrt.h>
PARAM_DEFINE_FLOAT(MC_YAWRATE_P, 0.3f); /* same on Flamewheel */
PARAM_DEFINE_FLOAT(MC_YAWRATE_D, 0.005f);
PARAM_DEFINE_FLOAT(MC_YAWRATE_I, 0.2f);
//PARAM_DEFINE_FLOAT(MC_YAWRATE_AWU, 0.0f);
//PARAM_DEFINE_FLOAT(MC_YAWRATE_LIM, 1.0f);
PARAM_DEFINE_FLOAT(MC_ATTRATE_P, 0.09f); /* 0.15 F405 Flamewheel */
PARAM_DEFINE_FLOAT(MC_ATTRATE_D, 0.002f);
PARAM_DEFINE_FLOAT(MC_ATTRATE_I, 0.0f);
//PARAM_DEFINE_FLOAT(MC_ATTRATE_AWU, 0.05f);
//PARAM_DEFINE_FLOAT(MC_ATTRATE_LIM, 1.0f); /**< roughly < 500 deg/s limit */
struct mc_rate_control_params {
float yawrate_p;
float yawrate_d;
float yawrate_i;
//float yawrate_awu;
//float yawrate_lim;
float attrate_p;
float attrate_d;
float attrate_i;
//float attrate_awu;
//float attrate_lim;
float rate_lim;
};
struct mc_rate_control_param_handles {
param_t yawrate_p;
param_t yawrate_i;
param_t yawrate_d;
//param_t yawrate_awu;
//param_t yawrate_lim;
param_t attrate_p;
param_t attrate_i;
param_t attrate_d;
//param_t attrate_awu;
//param_t attrate_lim;
};
/**
* Initialize all parameter handles and values
*
*/
static int parameters_init(struct mc_rate_control_param_handles *h);
/**
* Update all parameters
*
*/
static int parameters_update(const struct mc_rate_control_param_handles *h, struct mc_rate_control_params *p);
static int parameters_init(struct mc_rate_control_param_handles *h)
{
/* PID parameters */
h->yawrate_p = param_find("MC_YAWRATE_P");
h->yawrate_i = param_find("MC_YAWRATE_I");
h->yawrate_d = param_find("MC_YAWRATE_D");
//h->yawrate_awu = param_find("MC_YAWRATE_AWU");
//h->yawrate_lim = param_find("MC_YAWRATE_LIM");
h->attrate_p = param_find("MC_ATTRATE_P");
h->attrate_i = param_find("MC_ATTRATE_I");
h->attrate_d = param_find("MC_ATTRATE_D");
//h->attrate_awu = param_find("MC_ATTRATE_AWU");
//h->attrate_lim = param_find("MC_ATTRATE_LIM");
return OK;
}
static int parameters_update(const struct mc_rate_control_param_handles *h, struct mc_rate_control_params *p)
{
param_get(h->yawrate_p, &(p->yawrate_p));
param_get(h->yawrate_i, &(p->yawrate_i));
param_get(h->yawrate_d, &(p->yawrate_d));
//param_get(h->yawrate_awu, &(p->yawrate_awu));
//param_get(h->yawrate_lim, &(p->yawrate_lim));
param_get(h->attrate_p, &(p->attrate_p));
param_get(h->attrate_i, &(p->attrate_i));
param_get(h->attrate_d, &(p->attrate_d));
//param_get(h->attrate_awu, &(p->attrate_awu));
//param_get(h->attrate_lim, &(p->attrate_lim));
return OK;
}
void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp,
const float rates[], struct actuator_controls_s *actuators, bool reset_integral)
{
static uint64_t last_run = 0;
const float deltaT = (hrt_absolute_time() - last_run) / 1000000.0f;
static uint64_t last_input = 0;
if (last_input != rate_sp->timestamp) {
last_input = rate_sp->timestamp;
}
last_run = hrt_absolute_time();
static int motor_skip_counter = 0;
static PID_t pitch_rate_controller;
static PID_t roll_rate_controller;
static struct mc_rate_control_params p;
static struct mc_rate_control_param_handles h;
static bool initialized = false;
/* initialize the pid controllers when the function is called for the first time */
if (initialized == false) {
parameters_init(&h);
parameters_update(&h, &p);
initialized = true;
pid_init(&pitch_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f, PID_MODE_DERIVATIV_CALC_NO_SP, 0.003f);
pid_init(&roll_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f, PID_MODE_DERIVATIV_CALC_NO_SP, 0.003f);
}
/* load new parameters with lower rate */
if (motor_skip_counter % 2500 == 0) {
/* update parameters from storage */
parameters_update(&h, &p);
pid_set_parameters(&pitch_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f);
pid_set_parameters(&roll_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f);
}
/* reset integrals if needed */
if (reset_integral) {
pid_reset_integral(&pitch_rate_controller);
pid_reset_integral(&roll_rate_controller);
// TODO pid_reset_integral(&yaw_rate_controller);
}
/* control pitch (forward) output */
float pitch_control = pid_calculate(&pitch_rate_controller, rate_sp->pitch ,
rates[1], 0.0f, deltaT);
/* control roll (left/right) output */
float roll_control = pid_calculate(&roll_rate_controller, rate_sp->roll ,
rates[0], 0.0f, deltaT);
/* control yaw rate */ //XXX use library here
float yaw_rate_control = p.yawrate_p * (rate_sp->yaw - rates[2]);
/* increase resilience to faulty control inputs */
if (!isfinite(yaw_rate_control)) {
yaw_rate_control = 0.0f;
warnx("rej. NaN ctrl yaw");
}
actuators->control[0] = roll_control;
actuators->control[1] = pitch_control;
actuators->control[2] = yaw_rate_control;
actuators->control[3] = rate_sp->thrust;
motor_skip_counter++;
}