diff options
author | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2011-12-31 01:16:48 +0000 |
---|---|---|
committer | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2011-12-31 01:16:48 +0000 |
commit | a0c4a9922251c1e1da487a44d72fbd6350d83ce6 (patch) | |
tree | 155a7336bc1eb63e3e28554e68c432a6909a5bb1 | |
parent | 61b8ff084525d059951be3382ceb0c73454be1c2 (diff) | |
download | px4-firmware-a0c4a9922251c1e1da487a44d72fbd6350d83ce6.tar.gz px4-firmware-a0c4a9922251c1e1da487a44d72fbd6350d83ce6.tar.bz2 px4-firmware-a0c4a9922251c1e1da487a44d72fbd6350d83ce6.zip |
Add (untested) support for the buttons on the Olimex LPC1766-STK board
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4243 7fd9a85b-ad96-42d3-883c-3090e2eb8679
-rw-r--r-- | nuttx/ChangeLog | 5 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/include/board.h | 76 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/src/Makefile | 7 | ||||
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h | 40 | ||||
-rw-r--r-- | nuttx/configs/olimex-lpc1766stk/src/up_buttons.c | 201 |
5 files changed, 307 insertions, 22 deletions
diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 895aa6d8b..f179381fb 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2309,3 +2309,8 @@ for the PIC32MX family. * arch/arm/src/stm32/stm32_gpio.c: Correct an error in some of the GPIO initialization logic. Fix submitted by Mike Smith. + * configs/olimex-lpc1766stk/src/up_leds.c: Add new interfaces so that is + CONFIG_ARCH_LEDS are not set, the LEDs may be controlled from application + logic. + *configs/olimex-lpc1766stk/src/up_buttons.c: Add support form the buttons + on the Olimex LPC1766-STK board. diff --git a/nuttx/configs/olimex-lpc1766stk/include/board.h b/nuttx/configs/olimex-lpc1766stk/include/board.h index de630b4bc..2d99fe40a 100755 --- a/nuttx/configs/olimex-lpc1766stk/include/board.h +++ b/nuttx/configs/olimex-lpc1766stk/include/board.h @@ -43,6 +43,10 @@ #include <nuttx/config.h> +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +# include <nuttx/irq.h> +#endif + /************************************************************************************ * Definitions ************************************************************************************/ @@ -183,10 +187,10 @@ #define BOARD_BUTTON_WAKEUP 2 #define BOARD_JOYSTICK_CENTER 3 -#define BOARD_JOYSTICK_DOWN 4 -#define BOARD_JOYSTICK_LEFT 5 -#define BOARD_JOYSTICK_RIGHT 6 -#define BOARD_JOYSTICK_UP 7 +#define BOARD_JOYSTICK_UP 4 +#define BOARD_JOYSTICK_DOWN 5 +#define BOARD_JOYSTICK_LEFT 6 +#define BOARD_JOYSTICK_RIGHT 7 #define BOARD_NUM_BUTTONS 8 @@ -195,10 +199,10 @@ #define BOARD_BUTTON_WAKEUP_BIT (1 << BOARD_BUTTON_WAKEUP) #define BOARD_JOYSTICK_CENTER_BIT (1 << BOARD_JOYSTICK_CENTER) +#define BOARD_JOYSTICK_UP_BIT (1 << BOARD_JOYSTICK_UP) #define BOARD_JOYSTICK_DOWN_BIT (1 << BOARD_JOYSTICK_DOWN) #define BOARD_JOYSTICK_LEFT_BIT (1 << BOARD_JOYSTICK_LEFT) #define BOARD_JOYSTICK_RIGHT_BIT (1 << BOARD_JOYSTICK_RIGHT) -#define BOARD_JOYSTICK_UP_BIT (1 << BOARD_JOYSTICK_UP) /* Alternate pin selections *********************************************************/ @@ -368,21 +372,21 @@ extern "C" { * Name: lpc17_boardinitialize * * Description: - * All LPC17xx architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. + * All LPC17xx architectures must provide the following entry point. This entry + * point is called early in the intitialization -- after all memory has been + * configured and mapped but before any devices have been initialized. * ************************************************************************************/ EXTERN void lpc17_boardinitialize(void); -/**************************************************************************** +/************************************************************************************ * Name: lpc17_ledinit and lpc17_setled * * Description: - * If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board - * LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces - * are available to control the LEDs from user applications. + * If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If + * CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to + * control the LEDs from user applications. * ****************************************************************************/ @@ -392,6 +396,54 @@ EXTERN void lpc17_setled(int led, bool ledon); EXTERN void lpc17_setleds(uint8_t ledset); #endif +/************************************************************************************ + * Name: up_buttoninit + * + * Description: + * up_buttoninit() must be called to initialize button resources. After that, + * up_buttons() may be called to collect the current state of all buttons or + * up_irqbutton() may be called to register button interrupt handlers. + * + ****************************************************************************/ + +#ifdef CONFIG_ARCH_BUTTONS +EXTERN void up_buttoninit(void); + +/************************************************************************************ + * Name: up_buttons + * + * Description: + * After up_buttoninit() has been called, up_buttons() may be called to collect + * the state of all buttons. up_buttons() returns an 8-bit bit set with each bit + * associated with a button. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT + * definitions above for the meaning of each bit. + * + ****************************************************************************/ + +EXTERN uint8_t up_buttons(void); + +/************************************************************************************ + * Button support. + * + * Description: + * up_buttoninit() must be called to initialize button resources. After that, + * up_buttons() may be called to collect the current state of all buttons or + * up_irqbutton() may be called to register button interrupt handlers. + * + * up_irqbutton() may be called to register an interrupt handler that will be called + * when a button is depressed or released. The ID value is a button enumeration + * value that uniquely identifies a button resource. See the BOARD_BUTTON_* and + * BOARD_JOYSTICK_* definitions in above for the meaning of enumeration values + * The previous interrupt handler address is returned (so that it may restored, if + * so desired). + * + ************************************************************************************/ + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler); +#endif +#endif /* CONFIG_ARCH_BUTTONS */ + #undef EXTERN #if defined(__cplusplus) } diff --git a/nuttx/configs/olimex-lpc1766stk/src/Makefile b/nuttx/configs/olimex-lpc1766stk/src/Makefile index 981a4b4df..f006461bc 100755 --- a/nuttx/configs/olimex-lpc1766stk/src/Makefile +++ b/nuttx/configs/olimex-lpc1766stk/src/Makefile @@ -39,16 +39,23 @@ CFLAGS += -I$(TOPDIR)/sched ASRCS = CSRCS = up_boot.c up_leds.c up_ssp.c + ifeq ($(CONFIG_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif + ifeq ($(CONFIG_USBSTRG),y) CSRCS += up_usbstrg.c endif + ifeq ($(CONFIG_NX_LCDDRIVER),y) CSRCS += up_lcd.c endif +ifeq ($(CONFIG_ARCH_BUTTONS),y) +CSRCS += up_buttons.c +endif + AOBJS = $(ASRCS:.S=$(OBJEXT)) COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h b/nuttx/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h index db9915eef..4fa082369 100755 --- a/nuttx/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h +++ b/nuttx/configs/olimex-lpc1766stk/src/lpc1766stk_internal.h @@ -2,7 +2,7 @@ * configs/olimex-lpc1766stk/src/lpc1766stk_internal.h * arch/arm/src/board/lpc1766stk_internal.n * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -137,11 +137,20 @@ * P2[12]/#EINT2/I2STX_WS 51 WAKE-UP * P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1 * P2[13]/#EINT3/I2STX_SDA 50 BUT2 + * + * Pull-ups are not required because the pins are already pulled-up by through + * resistors on the board. */ -#define LPC1766STK_WAKE_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12) -#define LPC1766STK_BUT1 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN23) -#define LPC1766STK_BUT2 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN13) +#define LPC1766STK_BUT1 (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN23) +#define LPC1766STK_BUT2 (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN13) +#define LPC1766STK_WAKEUP (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN12) + +/* Button IRQ numbers */ + +#define LPC1766STK_BUT1_IRQ LPC17_IRQ_P0p23 +#define LPC1766STK_BUT2_IRQ LPC17_IRQ_P2p13 +#define LPC1766STK_WAKEUP_IRQ LPC17_IRQ_P2p12 /* Joystick GPIO PIN SIGNAL NAME * -------------------------------- ---- -------------- @@ -150,13 +159,24 @@ * P2[1]/PWM1[2]/RXD1 74 DOWN * P2[7]/RD2/RTS1 66 LEFT * P2[8]/TD2/TXD2 65 RIGHT + * + * Pull-ups are not required because the pins are already pulled-up by through + * resistors on the board. */ -#define LPC1766STK_CENTER (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5) -#define LPC1766STK_UP (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN0) -#define LPC1766STK_DOWN (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN1) -#define LPC1766STK_LEFT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN7) -#define LPC1766STK_RIGHT (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN8) +#define LPC1766STK_CENTER (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN5) +#define LPC1766STK_UP (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN0) +#define LPC1766STK_DOWN (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN1) +#define LPC1766STK_LEFT (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN7) +#define LPC1766STK_RIGHT (GPIO_INPUT | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN8) + +/* Joystick IRQ numbers */ + +#define LPC1766STK_CENTER_IRQ LPC17_IRQ_P0p5 +#define LPC1766STK_UP_IRQ LPC17_IRQ_P2p0 +#define LPC1766STK_DOWN_IRQ LPC17_IRQ_P2p1 +#define LPC1766STK_LEFT_IRQ LPC17_IRQ_P2p7 +#define LPC1766STK_RIGHT_IRQ LPC17_IRQ_P2p8 /* Nokia LCD GPIO PIN SIGNAL NAME * -------------------------------- ---- -------------- @@ -228,7 +248,7 @@ * ************************************************************************************/ -extern void weak_function lpc17_sspinitialize(void); +void weak_function lpc17_sspinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */ diff --git a/nuttx/configs/olimex-lpc1766stk/src/up_buttons.c b/nuttx/configs/olimex-lpc1766stk/src/up_buttons.c new file mode 100644 index 000000000..65fe89dfc --- /dev/null +++ b/nuttx/configs/olimex-lpc1766stk/src/up_buttons.c @@ -0,0 +1,201 @@ +/**************************************************************************** + * configs/olimex-lpc1766stk/src/up_buttons.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> + +#include <nuttx/irq.h> + +#include <arch/board/board.h> +#include "lpc1766stk_internal.h" + +#ifdef CONFIG_ARCH_BUTTONS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* Pin configuration for each STM3210E-EVAL button. This array is indexed by + * the BUTTON_* and JOYSTICK_* definitions in board.h + */ + +static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] = +{ + LPC1766STK_BUT1, LPC1766STK_BUT2, LPC1766STK_WAKEUP, LPC1766STK_CENTER, + LPC1766STK_UP, LPC1766STK_DOWN, LPC1766STK_LEFT, LPC1766STK_RIGHT +}; + +/* This array defines all of the interupt handlers current attached to + * button events. + */ + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +static xcpt_t g_buttonisr[BOARD_NUM_BUTTONS]; + +/* This array provides the mapping from button ID numbers to button IRQ + * numbers. + */ + +static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] = +{ + LPC1766STK_BUT1_IRQ, LPC1766STK_BUT2_IRQ, LPC1766STK_WAKEUP_IRQ, + LPC1766STK_CENTER_IRQ, LPC1766STK_UP_IRQ, LPC1766STK_DOWN_IRQ, + LPC1766STK_LEFT_IRQ, LPC1766STK_RIGHT_IRQ +}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_buttoninit + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons or up_irqbutton() may be called to register button interrupt + * handlers. + * + ****************************************************************************/ + +void up_buttoninit(void) +{ + int i; + + /* Configure the GPIO pins as inputs. */ + + for (i = 0; i < BOARD_NUM_BUTTONS; i++) + { + lpc17_configgpio(g_buttoncfg[i]); + } +} + +/**************************************************************************** + * Name: up_buttons + * + * Description: + * up_buttons() may be called at any time to harvest the state of every + * button. The state of the buttons is returned as a bitset with one + * bit corresponding to each button: If the bit is set, then the button + * is pressed. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT + * definitions in board.h for the meaning of each bit. + * + ****************************************************************************/ + +uint8_t up_buttons(void) +{ + uint8_t ret = 0; + int i; + + /* Check that state of each key */ + + for (i = 0; i < BOARD_NUM_BUTTONS; i++) + { + /* A LOW value means that the key is pressed. */ + + bool released = lpc17_gpioread(g_buttoncfg[i]); + + /* Accumulate the set of depressed (not released) keys */ + + if (!released) + { + ret |= (1 << i); + } + } + + return ret; +} + +/************************************************************************************ + * Button support. + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons or up_irqbutton() may be called to register button interrupt + * handlers. + * + * up_irqbutton() may be called to register an interrupt handler that will + * be called when a button is depressed or released. The ID value is a + * button enumeration value that uniquely identifies a button resource. See the + * BOARD_BUTTON_* and BOARD_JOYSTICK_* definitions in board.h for the meaning + * of enumeration values. The previous interrupt handler address is returned + * (so that it may restored, if so desired). + * + ************************************************************************************/ + +#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ) +xcpt_t up_irqbutton(int id, xcpt_t irqhandler) +{ + xcpt_t oldhandler = NULL; + irqstate_t flags; + + /* Verify that the button ID is within range */ + + if ((unsigned)id < BOARD_NUM_BUTTONS) + { + /* Return the current button handler and set the new interrupt handler */ + + oldhandler = g_buttonisr[id]; + g_buttonisr = irqhandler; + + /* Disable interrupts until we are done */ + + flags = irqsave(); + + /* Configure the interrupt */ + + (void)irq_attach(g_buttonirq[id], irqhandler); + up_enable_irq(g_buttonirq[id]); + irqrestore(flags); + } + return oldhandler; +} +#endif + +#endif /* CONFIG_ARCH_BUTTONS */ |