diff options
author | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-05-29 00:54:22 +0000 |
---|---|---|
committer | patacongo <patacongo@7fd9a85b-ad96-42d3-883c-3090e2eb8679> | 2012-05-29 00:54:22 +0000 |
commit | 5e0db5610808aae42989238e40f0731f009dba8f (patch) | |
tree | b1005787ec664d9595472abbc73bba602d0e00e6 | |
parent | 3295520ba2502e688849287d18d2e6dce0a74742 (diff) | |
download | px4-firmware-5e0db5610808aae42989238e40f0731f009dba8f.tar.gz px4-firmware-5e0db5610808aae42989238e40f0731f009dba8f.tar.bz2 px4-firmware-5e0db5610808aae42989238e40f0731f009dba8f.zip |
Massive naming fix: STMPE11->STMPE811
git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4782 7fd9a85b-ad96-42d3-883c-3090e2eb8679
28 files changed, 617 insertions, 544 deletions
diff --git a/apps/nshlib/Kconfig b/apps/nshlib/Kconfig index 1f7b3d754..7e419bdde 100644 --- a/apps/nshlib/Kconfig +++ b/apps/nshlib/Kconfig @@ -88,6 +88,9 @@ config NSH_DISABLE_MOUNT config NSH_DISABLE_MW bool "Disable mw" default n +config NSH_DISABLE_NSFMOUNT + bool "Disable nfsmount" + default n config NSH_DISABLE_PS bool "Disable ps" default n @@ -288,10 +291,78 @@ config NSH_CONSOLE CONFIG_CDCACM and CONFIG_CDCACM_CONSOLE - Sets up the CDC/ACM serial device as a console device at dev/console. + CONFIG_NSH_USBCONSOLE and CONFIG_NSH_USBCONDEV - Sets up the + some other USB serial device as the NSH console (not necessarily + dev/console). + +config NSH_USBCONSOLE + bool "Use a USB console" + default n + depends on NSH_CONSOLE && USBDEV + ---help--- + If defined, then the an arbitrary USB device may be used + to as the NSH console. In this case, CONFIG_NSH_USBCONDEV + must be defined to indicate which USB device to use as + the console. + +config NSH_USBCONDEV + string "USB console device" + default "/dev/ttyACM0" + depends on NSH_USBCONSOLE + ---help--- + If CONFIG_NSH_USBCONSOLE is set to 'y', then CONFIG_NSH_USBCONDEV + must also be set to select the USB device used to support + the NSH console. This should be set to the quoted name of a + readable/write-able USB driver such as: + CONFIG_NSH_USBCONDEV="/dev/ttyACM0". + +config UBSDEV_MINOR + int "USB console device minor number" + default 0 + depends on NSH_USBCONSOLE + ---help--- + If there are more than one USB devices, then a USB device + minor number may also need to be provided. Default: 0 + +menu "USB Trace Support" + depends on USBDEV && (DEBUG || USBDEV_TRACE) + +config NSH_USBDEV_TRACEINIT + bool "Show initialization events" + default n + ---help--- + Show initialization events + +config NSH_USBDEV_TRACECLASS + bool "Show class driver events" + default n + ---help--- + Show class driver events + +config NSH_USBDEV_TRACETRANSFERS + bool "Show data transfer events" + default n + ---help--- + Show data transfer events + +config NSH_USBDEV_TRACECONTROLLER + bool "Show controller events" + default n + ---help--- + Show controller events + +config NSH_USBDEV_TRACEINTERRUPTS + bool "Show interrupt-related events" + default n + ---help--- + Show interrupt-related events + +endmenu + config NSH_CONDEV bool "Default console device" default "/dev/console" - depends on NSH_CONSOLE + depends on NSH_CONSOLE && !NSH_USBCONSOLE ---help--- If NSH_CONSOLE is set to 'y', then NSH_CONDEV may also be set to select the serial device used to support diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index 28bda129b..9d5096aac 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -2708,7 +2708,7 @@ position, not an offset. * graphics/nxtk/nxtk_drawframe.c: Framed windows are now drawn in three colors (instead of just two). - * drivers/input/stmpe11_*: Added a driver to support the STMicro STMPE11 + * drivers/input/stmpe811_*: Added a driver to support the STMicro STMPE811 IO Expander and touchscreen driver. * configs/stm3240g-eval/nxwm: Added to configuration for testing the NxWM window manager on the STM3240G-EVAL board. @@ -2720,8 +2720,8 @@ Then add CONFIG_NX_WRITEONLY which is the more generic way of saying that no NX component should try to read from the underlying graphic device (LCD or other). - * configs/stm3240g-eval/src/up_stmpe11.c: Add board-specific support for the - the STMPE11 I/O expander on the STM3240G-EVAL board. Verfied that the + * configs/stm3240g-eval/src/up_stmpe811.c: Add board-specific support for the + the STMPE811 I/O expander on the STM3240G-EVAL board. Verfied that the STM3240G-EVAL touchscreen is now fully functional. * include/cxx/cfcntl: Added std:: header file. * graphics/nxbe/nxbe_filltrapezoid.c and graphics/nxglib/fb/nxglib_filltrapezoid.c: @@ -2730,14 +2730,14 @@ * configs/sam3u-ek, configs/sim, arch/sim/src/up_touchscreen.c, and apps/examples/touchscreen: Standardize the board-specific, touchscreen initialization interfaces. - * drivers/input/stmpe11_base.c and configs/stm3240g-eval: The STMPE11-based + * drivers/input/stmpe811_base.c and configs/stm3240g-eval: The STMPE811-based touchscreen seems to work better with edge (vs. level) interrupts - * drivers/input/stmpe11_tsc.c: Fix some status checks so that the touchscreen + * drivers/input/stmpe811_tsc.c: Fix some status checks so that the touchscreen interrupt handling logic does not read data if the fifo is not at the threshold level. * include/nuttx/wqueue.h: Add macro work_available() to determine if the previously scheduled work has completed. - * drivers/stmpe11_tsc.c: Correct errors: (1) Since all interrupt logic is done on + * drivers/stmpe811_tsc.c: Correct errors: (1) Since all interrupt logic is done on the worker thread, disabling interrupts does not provide protected; Need to disable pre-emption. (2) Fix handling of touch ID and (2) add some logic to prevent certain kinds of data overrun. @@ -2746,7 +2746,7 @@ other logic can use the defaults. * graphics/nxtk/nxtk_events.c: Fixed an important but in the logic that translates the mouse/touchscreen position data for framed windows and toolbars. - * drivers/input/stmpe11_tsc.c, tsc2007.c, and ads7843e.c: Need to keep track of + * drivers/input/stmpe811_tsc.c, tsc2007.c, and ads7843e.c: Need to keep track of when if positional data is valid. When the touch is released, the X/Y position of the release must be the same as the X/Y position of the last touch (se that the release occurs in the same window as the last touch). @@ -2760,7 +2760,7 @@ window to revert to the previous window. Not good behavior. * sched/sched_mergepending.c: Add task switching instrumentation. There is a case here where instrumentation was missing. Contributed by Petri Tanskanen. - * CONFIG_STMPE11_THRESHX, CONFIG_STMPE11_THRESHX, and drivers/stmpe11_tsc.c: Add some + * CONFIG_STMPE811_THRESHX, CONFIG_STMPE811_THRESHX, and drivers/stmpe811_tsc.c: Add some thresholding controls to all slow down processing of touchscreen samples. This is a problem with NX in multi-user mode: touchscreen data gets sent via a message and when the message queue gets full the sender blocks and @@ -2769,7 +2769,7 @@ * include/sched.h: Fix a typo (missing semicolon) in prototype of on_exit(); * sched/on_exit.c and include/nuttx/sched.h: Fix some old typos that caused compilation errors when CONFIG_SCHED_ONEXIT is defined. - * configs/stm3240g-eval/nxwm/defconfig: The default NxWM now uses the STMPE11 + * configs/stm3240g-eval/nxwm/defconfig: The default NxWM now uses the STMPE811 touchscreen. * include/cxx/csched: Added * graphic/nxmu/nxmu_sendserver.c, nxmu_sendwindow.c, and nxmu_sendclient.c: @@ -2796,7 +2796,7 @@ keyboard data in multi-user mode. * graphics/nxconsole/nxcon_kdbind.c: Fixed unmatched sem_wait and sem_post. Fix some conditional compilation that included a few too many lines of code. - * drivers/input/stmpe11_tsc.c and stmpe11.h: Add a timeout to catch missed + * drivers/input/stmpe811_tsc.c and stmpe811.h: Add a timeout to catch missed pen up events. Now the STM3240G-EVAL touchscreen works very smoothly. * configs/stm3240g-eval/nxwm/defconfig: Enable support for NxConsole keyboard input. Increasing spacing of icons. @@ -2830,3 +2830,5 @@ as the corresponding STM3240G-EVAL configurations. This adds FSMC SRAM, touchscreen, and LCD support. * configs/stm3220g-eval/: Add a NxWM configuration for the STM3220G-EVAL. + * stmpe11*: Fix a massive naming problem. All references to STMPE11 should be + STMPE811. diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 87383058b..f85866821 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -970,7 +970,7 @@ <ul> <li><b>Drivers</b>. Added a watchdog timer driver infrastructure. - Add general support for STMicro STMPE11 I/O Expander/touchscreen device. + Add general support for STMicro STMPE811 I/O Expander/touchscreen device. </li> <li><b>STM32</b>. Add support for the STM32 IWDG and WWDG watchodog timers. @@ -978,7 +978,7 @@ serial driver now uses circular DMA to improve Rx performance (Contributed by Mike Smith). </li> <li><b>STM3240G-EVAL Board</b>. - Add support for the LCD and for the STMPE11 I/O Expander as a touchscreen controller. + Add support for the LCD and for the STMPE811 I/O Expander as a touchscreen controller. </li> <li><b>PIC32 Boards</b>. Board support for the Mikroelektronika PIC32MX7 Multimedia Board (MMB) and for the Sparkfun UBW32 PIC32 board. @@ -1856,7 +1856,7 @@ A more complete port would include support for SDIO and USB OTG which are not available in NuttX 6.13. The USB OTG device controller driver, and LCD driver and a function I2C driver were added in NuttX 6.17. STM32 IWDG and WWDG watchdog timer drivers were added in NuttX 6.18 (should be compatible with F1 and F2). - An LCD driver and a touchscreen driver for the STM3240G-EVAL based on the STMPE11 I/O expander were also added in NuttX 6.18. + An LCD driver and a touchscreen driver for the STM3240G-EVAL based on the STMPE811 I/O expander were also added in NuttX 6.18. </p> </ul> </td> @@ -2913,7 +2913,7 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> position, not an offset. * graphics/nxtk/nxtk_drawframe.c: Framed windows are now drawn in three colors (instead of just two). - * drivers/input/stmpe11_*: Added a driver to support the STMicro STMPE11 + * drivers/input/stmpe811_*: Added a driver to support the STMicro STMPE811 IO Expander and touchscreen driver. * configs/stm3240g-eval/nxwm: Added to configuration for testing the NxWM window manager on the STM3240G-EVAL board. @@ -2925,8 +2925,8 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> Then add CONFIG_NX_WRITEONLY which is the more generic way of saying that no NX component should try to read from the underlying graphic device (LCD or other). - * configs/stm3240g-eval/src/up_stmpe11.c: Add board-specific support for the - the STMPE11 I/O expander on the STM3240G-EVAL board. Verfied that the + * configs/stm3240g-eval/src/up_stmpe811.c: Add board-specific support for the + the STMPE811 I/O expander on the STM3240G-EVAL board. Verfied that the STM3240G-EVAL touchscreen is now fully functional. * include/cxx/cfcntl: Added std:: header file. * graphics/nxbe/nxbe_filltrapezoid.c and graphics/nxglib/fb/nxglib_filltrapezoid.c: @@ -2935,14 +2935,14 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> * configs/sam3u-ek, configs/sim, arch/sim/src/up_touchscreen.c, and apps/examples/touchscreen: Standardize the board-specific, touchscreen initialization interfaces. - * drivers/input/stmpe11_base.c and configs/stm3240g-eval: The STMPE11-based + * drivers/input/stmpe811_base.c and configs/stm3240g-eval: The STMPE811-based touchscreen seems to work better with edge (vs. level) interrupts - * drivers/input/stmpe11_tsc.c: Fix some status checks so that the touchscreen + * drivers/input/stmpe811_tsc.c: Fix some status checks so that the touchscreen interrupt handling logic does not read data if the fifo is not at the threshold level. * include/nuttx/wqueue.h: Add macro work_available() to determine if the previously scheduled work has completed. - * drivers/stmpe11_tsc.c: Correct errors: (1) Since all interrupt logic is done on + * drivers/stmpe811_tsc.c: Correct errors: (1) Since all interrupt logic is done on the worker thread, disabling interrupts does not provide protected; Need to disable pre-emption. (2) Fix handling of touch ID and (2) add some logic to prevent certain kinds of data overrun. @@ -2951,7 +2951,7 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> other logic can use the defaults. * graphics/nxtk/nxtk_events.c: Fixed an important but in the logic that translates the mouse/touchscreen position data for framed windows and toolbars. - * drivers/input/stmpe11_tsc.c, tsc2007.c, and ads7843e.c: Need to keep track of + * drivers/input/stmpe811_tsc.c, tsc2007.c, and ads7843e.c: Need to keep track of when if positional data is valid. When the touch is released, the X/Y position of the release must be the same as the X/Y position of the last touch (se that the release occurs in the same window as the last touch). @@ -2965,7 +2965,7 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> window to revert to the previous window. Not good behavior. * sched/sched_mergepending.c: Add task switching instrumentation. There is a case here where instrumentation was missing. Contributed by Petri Tanskanen. - * CONFIG_STMPE11_THRESHX, CONFIG_STMPE11_THRESHX, and drivers/stmpe11_tsc.c: Add some + * CONFIG_STMPE811_THRESHX, CONFIG_STMPE811_THRESHX, and drivers/stmpe811_tsc.c: Add some thresholding controls to all slow down processing of touchscreen samples. This is a problem with NX in multi-user mode: touchscreen data gets sent via a message and when the message queue gets full the sender blocks and @@ -2974,7 +2974,7 @@ nuttx-6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> * include/sched.h: Fix a typo (missing semicolon) in prototype of on_exit(); * sched/on_exit.c and include/nuttx/sched.h: Fix some old typos that caused compilation errors when CONFIG_SCHED_ONEXIT is defined. - * configs/stm3240g-eval/nxwm/defconfig: The default NxWM now uses the STMPE11 + * configs/stm3240g-eval/nxwm/defconfig: The default NxWM now uses the STMPE811 touchscreen. * include/cxx/csched: Added * graphic/nxmu/nxmu_sendserver.c, nxmu_sendwindow.c, and nxmu_sendclient.c: diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html index 15019ad10..18ff07d19 100644 --- a/nuttx/Documentation/NuttxPortingGuide.html +++ b/nuttx/Documentation/NuttxPortingGuide.html @@ -4673,69 +4673,69 @@ build multiple touchscreens with the same driver. </li> <li> - <code>CONFIG_INPUT_STMPE11</code>: - Enables support for the STMPE11 driver (Needs <code>CONFIG_INPUT</code>) + <code>CONFIG_INPUT_STMPE811</code>: + Enables support for the STMPE811 driver (Needs <code>CONFIG_INPUT</code>) </li> <li> - <code>CONFIG_STMPE11_SPI</code>: + <code>CONFIG_STMPE811_SPI</code>: Enables support for the SPI interface (not currenly supported) </li> <li> - <code>CONFIG_STMPE11_I2C</code>: + <code>CONFIG_STMPE811_I2C</code>: Enables support for the I2C interface </li> <li> - <code>CONFIG_STMPE11_MULTIPLE </code>: - Can be defined to support multiple STMPE11 devices on board. + <code>CONFIG_STMPE811_MULTIPLE </code>: + Can be defined to support multiple STMPE811 devices on board. </li> <li> - <code>CONFIG_STMPE11_ACTIVELOW</code>: + <code>CONFIG_STMPE811_ACTIVELOW</code>: Interrupt is generated by an active low signal (or falling edge). </li> <li> - <code>CONFIG_STMPE11_EDGE</code>: + <code>CONFIG_STMPE811_EDGE</code>: Interrupt is generated on an edge (vs. on the active level) </li> <li> - <code>CONFIG_STMPE11_NPOLLWAITERS</code>: + <code>CONFIG_STMPE811_NPOLLWAITERS</code>: Maximum number of threads that can be waiting on poll() (ignored if <code>CONFIG_DISABLE_POLL</code> is set). </li> <li> - <code>CONFIG_STMPE11_TSC_DISABLE</code>: + <code>CONFIG_STMPE811_TSC_DISABLE</code>: Disable driver touchscreen functionality. </li> <li> - <code>CONFIG_STMPE11_ADC_DISABLE</code>: + <code>CONFIG_STMPE811_ADC_DISABLE</code>: Disable driver ADC functionality. </li> <li> - <code>CONFIG_STMPE11_GPIO_DISABLE</code>: + <code>CONFIG_STMPE811_GPIO_DISABLE</code>: Disable driver GPIO functionlaity. </li> <li> - <code>CONFIG_STMPE11_GPIOINT_DISABLE</code>: + <code>CONFIG_STMPE811_GPIOINT_DISABLE</code>: Disable driver GPIO interrupt functionality (ignored if GPIO functionality is disabled). </li> <li> - <code>CONFIG_STMPE11_SWAPXY</code>: + <code>CONFIG_STMPE811_SWAPXY</code>: Reverse the meaning of X and Y to handle different LCD orientations. </li> <li> - <code>CONFIG_STMPE11_TEMP_DISABLE</code>: + <code>CONFIG_STMPE811_TEMP_DISABLE</code>: Disable driver temperature sensor functionality. </li> <li> - <code>CONFIG_STMPE11_REGDEBUG</code>: + <code>CONFIG_STMPE811_REGDEBUG</code>: Enabled very low register-level debug output. Requires <code>CONFIG_DEBUG</code>. </li> <li> - <code>CONFIG_STMPE11_THRESHX</code> and <code>CONFIG_STMPE11_THRESHY</code>: - STMPE11 touchscreen data comes in a a very high rate. New touch positions + <code>CONFIG_STMPE811_THRESHX</code> and <code>CONFIG_STMPE811_THRESHY</code>: + STMPE811 touchscreen data comes in a a very high rate. New touch positions will only be reported when the X or Y data changes by these thresholds. This trades reduces data rate for some loss in dragging accuracy. The - STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So + STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel. Default: 12 </li> diff --git a/nuttx/ReleaseNotes b/nuttx/ReleaseNotes index 49e915209..e0dce0607 100644 --- a/nuttx/ReleaseNotes +++ b/nuttx/ReleaseNotes @@ -2772,13 +2772,13 @@ upon many of the changes in this NuttX release. New features and extended functionality: * Drivers. Added a watchdog timer driver infrastructure. Add general - support for STMicro STMPE11 I/O Expander/touchscreen device. + support for STMicro STMPE811 I/O Expander/touchscreen device. * STM32. Add support for the STM32 IWDG and WWDG watchodog timers. DMA now supports cicular buffer mode; serial driver now uses circular DMA to improve Rx performance (Contributed by Mike Smith). - * STM3240G-EVAL Board. Add support for the LCD and for the STMPE11 + * STM3240G-EVAL Board. Add support for the LCD and for the STMPE811 I/O Expander as a touchscreen controller. * PIC32 Boards. Board support for the Mikroelektronika PIC32MX7 diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index fc85e89e1..56659fe36 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -784,41 +784,41 @@ defconfig -- This is a configuration file similar to the Linux there are multiple TSC2007 touchscreens, this setting will enable multiple touchscreens with the same driver. - CONFIG_INPUT_STMPE11 - Enables support for the STMPE11 driver (Needs CONFIG_INPUT) - CONFIG_STMPE11_SPI + CONFIG_INPUT_STMPE811 + Enables support for the STMPE811 driver (Needs CONFIG_INPUT) + CONFIG_STMPE811_SPI Enables support for the SPI interface (not currenly supported) - CONFIG_STMPE11_I2C + CONFIG_STMPE811_I2C Enables support for the I2C interface - CONFIG_STMPE11_MULTIPLE - Can be defined to support multiple STMPE11 devices on board. - CONFIG_STMPE11_ACTIVELOW + CONFIG_STMPE811_MULTIPLE + Can be defined to support multiple STMPE811 devices on board. + CONFIG_STMPE811_ACTIVELOW Interrupt is generated by an active low signal (or falling edge). - CONFIG_STMPE11_EDGE + CONFIG_STMPE811_EDGE Interrupt is generated on an edge (vs. on the active level) - CONFIG_STMPE11_NPOLLWAITERS + CONFIG_STMPE811_NPOLLWAITERS Maximum number of threads that can be waiting on poll() (ignored if CONFIG_DISABLE_POLL is set). - CONFIG_STMPE11_TSC_DISABLE + CONFIG_STMPE811_TSC_DISABLE Disable driver touchscreen functionality. - CONFIG_STMPE11_ADC_DISABLE + CONFIG_STMPE811_ADC_DISABLE Disable driver ADC functionality. - CONFIG_STMPE11_GPIO_DISABLE + CONFIG_STMPE811_GPIO_DISABLE Disable driver GPIO functionlaity. - CONFIG_STMPE11_GPIOINT_DISABLE + CONFIG_STMPE811_GPIOINT_DISABLE Disable driver GPIO interrupt functionality (ignored if GPIO functionality is disabled). - CONFIG_STMPE11_SWAPXY + CONFIG_STMPE811_SWAPXY Reverse the meaning of X and Y to handle different LCD orientations. - CONFIG_STMPE11_TEMP_DISABLE + CONFIG_STMPE811_TEMP_DISABLE Disable driver temperature sensor functionality. - CONFIG_STMPE11_REGDEBUG + CONFIG_STMPE811_REGDEBUG Enabled very low register-level debug output. Requires CONFIG_DEBUG. - CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY - STMPE11 touchscreen data comes in a a very high rate. New touch positions + CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY + STMPE811 touchscreen data comes in a a very high rate. New touch positions will only be reported when the X or Y data changes by these thresholds. This trades reduces data rate for some loss in dragging accuracy. The - STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So + STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 would correspond to one pixel. Default: 12 diff --git a/nuttx/configs/stm3220g-eval/README.txt b/nuttx/configs/stm3220g-eval/README.txt index fd4d7f76d..4a75d5a1a 100644 --- a/nuttx/configs/stm3220g-eval/README.txt +++ b/nuttx/configs/stm3220g-eval/README.txt @@ -386,10 +386,10 @@ There are 2 possible SRAM configurations: I/O Expanders ============= -The STM3220G-EVAL has two STMPE11QTR I/O expanders on board both connected to +The STM3220G-EVAL has two STMPE811QTR I/O expanders on board both connected to the STM32 via I2C1. They share a common interrupt line: PI2. -STMPE11 U24, I2C address 0x41 (7-bit) +STMPE811 U24, I2C address 0x41 (7-bit) ------ ---- ---------------- -------------------------------------------- STPE11 PIN BOARD SIGNAL BOARD CONNECTION ------ ---- ---------------- -------------------------------------------- @@ -402,7 +402,7 @@ STPE11 PIN BOARD SIGNAL BOARD CONNECTION IN1 EXP_IO11 IN0 EXP_IO12 -STMPE11 U29, I2C address 0x44 (7-bit) +STMPE811 U29, I2C address 0x44 (7-bit) ------ ---- ---------------- -------------------------------------------- STPE11 PIN BOARD SIGNAL BOARD CONNECTION ------ ---- ---------------- -------------------------------------------- diff --git a/nuttx/configs/stm3220g-eval/nsh/appconfig b/nuttx/configs/stm3220g-eval/nsh/appconfig index e74f5abc0..5f7490ccb 100644 --- a/nuttx/configs/stm3220g-eval/nsh/appconfig +++ b/nuttx/configs/stm3220g-eval/nsh/appconfig @@ -80,7 +80,7 @@ ifeq ($(CONFIG_WATCHDOG),y) CONFIGURED_APPS += examples/watchdog endif -ifeq ($(CONFIG_INPUT_STMPE11),y) +ifeq ($(CONFIG_INPUT_STMPE811),y) CONFIGURED_APPS += examples/touchscreen endif diff --git a/nuttx/configs/stm3220g-eval/nsh/defconfig b/nuttx/configs/stm3220g-eval/nsh/defconfig index f226d0524..6643057d7 100644 --- a/nuttx/configs/stm3220g-eval/nsh/defconfig +++ b/nuttx/configs/stm3220g-eval/nsh/defconfig @@ -944,66 +944,66 @@ CONFIG_INPUT=n CONFIG_INPUT_TSC2007=n # -# STMPE11 input device configuration +# STMPE811 input device configuration # # Prerequisites: CONFIG_INPUT=y # Other settings that effect the driver: CONFIG_DISABLE_POLL # -# CONFIG_INPUT_STMPE11 -# Enables support for the STMPE11 driver (Needs CONFIG_INPUT) -# CONFIG_STMPE11_SPI +# CONFIG_INPUT_STMPE811 +# Enables support for the STMPE811 driver (Needs CONFIG_INPUT) +# CONFIG_STMPE811_SPI # Enables support for the SPI interface (not currenly supported) -# CONFIG_STMPE11_I2C +# CONFIG_STMPE811_I2C # Enables support for the I2C interface -# CONFIG_STMPE11_MULTIPLE -# Can be defined to support multiple STMPE11 devices on board. -# CONFIG_STMPE11_ACTIVELOW +# CONFIG_STMPE811_MULTIPLE +# Can be defined to support multiple STMPE811 devices on board. +# CONFIG_STMPE811_ACTIVELOW # Interrupt is generated by an active low signal (or falling edge). -# CONFIG_STMPE11_EDGE +# CONFIG_STMPE811_EDGE # Interrupt is generated on an edge (vs. on the active level) -# CONFIG_STMPE11_NPOLLWAITERS +# CONFIG_STMPE811_NPOLLWAITERS # Maximum number of threads that can be waiting on poll() (ignored if # CONFIG_DISABLE_POLL is set). -# CONFIG_STMPE11_TSC_DISABLE +# CONFIG_STMPE811_TSC_DISABLE # Disable driver touchscreen functionality. -# CONFIG_STMPE11_ADC_DISABLE +# CONFIG_STMPE811_ADC_DISABLE # Disable driver ADC functionality. -# CONFIG_STMPE11_GPIO_DISABLE +# CONFIG_STMPE811_GPIO_DISABLE # Disable driver GPIO functionality. -# CONFIG_STMPE11_GPIOINT_DISABLE +# CONFIG_STMPE811_GPIOINT_DISABLE # Disable driver GPIO interrupt functionality (ignored if GPIO functionality is # disabled). -# CONFIG_STMPE11_SWAPXY +# CONFIG_STMPE811_SWAPXY # Reverse the meaning of X and Y to handle different LCD orientations. # For the STM3220G-EVAL, X and Y should be swapped in PORTRAIT modes -# CONFIG_STMPE11_TEMP_DISABLE +# CONFIG_STMPE811_TEMP_DISABLE # Disable driver temperature sensor functionality. -# CONFIG_STMPE11_REGDBUG +# CONFIG_STMPE811_REGDBUG # Enabled very low register-level debug output. Requires CONFIG_DEBUG. -# CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY -# STMPE11 touchscreen data comes in a a very high rate. New touch positions +# CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY +# STMPE811 touchscreen data comes in a a very high rate. New touch positions # will only be reported when the X or Y data changes by these thresholds. # This trades reduces data rate for some loss in dragging accuracy. The -# STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So +# STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So # for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 # would correspond to one pixel. Default: 12 # -CONFIG_INPUT_STMPE11=n -CONFIG_STMPE11_SPI=n -CONFIG_STMPE11_I2C=y -CONFIG_STMPE11_MULTIPLE=y -CONFIG_STMPE11_ACTIVELOW=y -CONFIG_STMPE11_EDGE=y -#CONFIG_STMPE11_NPOLLWAITERS -CONFIG_STMPE11_TSC_DISABLE=n -CONFIG_STMPE11_ADC_DISABLE=y -CONFIG_STMPE11_GPIO_DISABLE=y -CONFIG_STMPE11_GPIOINT_DISABLE=y -CONFIG_STMPE11_SWAPXY=y -CONFIG_STMPE11_TEMP_DISABLE=y -CONFIG_STMPE11_REGDEBUG=n -CONFIG_STMPE11_THRESHX=26 -CONFIG_STMPE11_THRESHY=34 +CONFIG_INPUT_STMPE811=n +CONFIG_STMPE811_SPI=n +CONFIG_STMPE811_I2C=y +CONFIG_STMPE811_MULTIPLE=y +CONFIG_STMPE811_ACTIVELOW=y +CONFIG_STMPE811_EDGE=y +#CONFIG_STMPE811_NPOLLWAITERS +CONFIG_STMPE811_TSC_DISABLE=n +CONFIG_STMPE811_ADC_DISABLE=y +CONFIG_STMPE811_GPIO_DISABLE=y +CONFIG_STMPE811_GPIOINT_DISABLE=y +CONFIG_STMPE811_SWAPXY=y +CONFIG_STMPE811_TEMP_DISABLE=y +CONFIG_STMPE811_REGDEBUG=n +CONFIG_STMPE811_THRESHX=26 +CONFIG_STMPE811_THRESHY=34 # # USB Device Configuration diff --git a/nuttx/configs/stm3220g-eval/nxwm/defconfig b/nuttx/configs/stm3220g-eval/nxwm/defconfig index 7c6a19dd6..ba55a2b95 100644 --- a/nuttx/configs/stm3220g-eval/nxwm/defconfig +++ b/nuttx/configs/stm3220g-eval/nxwm/defconfig @@ -945,66 +945,66 @@ CONFIG_INPUT=y CONFIG_INPUT_TSC2007=n # -# STMPE11 input device configuration +# STMPE811 input device configuration # # Prerequisites: CONFIG_INPUT=y # Other settings that effect the driver: CONFIG_DISABLE_POLL # -# CONFIG_INPUT_STMPE11 -# Enables support for the STMPE11 driver (Needs CONFIG_INPUT) -# CONFIG_STMPE11_SPI +# CONFIG_INPUT_STMPE811 +# Enables support for the STMPE811 driver (Needs CONFIG_INPUT) +# CONFIG_STMPE811_SPI # Enables support for the SPI interface (not currenly supported) -# CONFIG_STMPE11_I2C +# CONFIG_STMPE811_I2C # Enables support for the I2C interface -# CONFIG_STMPE11_MULTIPLE -# Can be defined to support multiple STMPE11 devices on board. -# CONFIG_STMPE11_ACTIVELOW +# CONFIG_STMPE811_MULTIPLE +# Can be defined to support multiple STMPE811 devices on board. +# CONFIG_STMPE811_ACTIVELOW # Interrupt is generated by an active low signal (or falling edge). -# CONFIG_STMPE11_EDGE +# CONFIG_STMPE811_EDGE # Interrupt is generated on an edge (vs. on the active level) -# CONFIG_STMPE11_NPOLLWAITERS +# CONFIG_STMPE811_NPOLLWAITERS # Maximum number of threads that can be waiting on poll() (ignored if # CONFIG_DISABLE_POLL is set). -# CONFIG_STMPE11_TSC_DISABLE +# CONFIG_STMPE811_TSC_DISABLE # Disable driver touchscreen functionality. -# CONFIG_STMPE11_ADC_DISABLE +# CONFIG_STMPE811_ADC_DISABLE # Disable driver ADC functionality. -# CONFIG_STMPE11_GPIO_DISABLE +# CONFIG_STMPE811_GPIO_DISABLE # Disable driver GPIO functionality. -# CONFIG_STMPE11_GPIOINT_DISABLE +# CONFIG_STMPE811_GPIOINT_DISABLE # Disable driver GPIO interrupt functionality (ignored if GPIO functionality is # disabled). -# CONFIG_STMPE11_SWAPXY +# CONFIG_STMPE811_SWAPXY # Reverse the meaning of X and Y to handle different LCD orientations. # For the STM3220G-EVAL, X and Y should be swapped in PORTRAIT modes -# CONFIG_STMPE11_TEMP_DISABLE +# CONFIG_STMPE811_TEMP_DISABLE # Disable driver temperature sensor functionality. -# CONFIG_STMPE11_REGDBUG +# CONFIG_STMPE811_REGDBUG # Enabled very low register-level debug output. Requires CONFIG_DEBUG. -# CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY -# STMPE11 touchscreen data comes in a a very high rate. New touch positions +# CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY +# STMPE811 touchscreen data comes in a a very high rate. New touch positions # will only be reported when the X or Y data changes by these thresholds. # This trades reduces data rate for some loss in dragging accuracy. The -# STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So +# STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So # for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 # would correspond to one pixel. Default: 12 # -CONFIG_INPUT_STMPE11=y -CONFIG_STMPE11_SPI=n -CONFIG_STMPE11_I2C=y -CONFIG_STMPE11_MULTIPLE=y -CONFIG_STMPE11_ACTIVELOW=y -CONFIG_STMPE11_EDGE=y -#CONFIG_STMPE11_NPOLLWAITERS -CONFIG_STMPE11_TSC_DISABLE=n -CONFIG_STMPE11_ADC_DISABLE=y -CONFIG_STMPE11_GPIO_DISABLE=y -CONFIG_STMPE11_GPIOINT_DISABLE=y -CONFIG_STMPE11_SWAPXY=n -CONFIG_STMPE11_TEMP_DISABLE=y -CONFIG_STMPE11_REGDEBUG=n -CONFIG_STMPE11_THRESHX=39 -CONFIG_STMPE11_THRESHY=51 +CONFIG_INPUT_STMPE811=y +CONFIG_STMPE811_SPI=n +CONFIG_STMPE811_I2C=y +CONFIG_STMPE811_MULTIPLE=y +CONFIG_STMPE811_ACTIVELOW=y +CONFIG_STMPE811_EDGE=y +#CONFIG_STMPE811_NPOLLWAITERS +CONFIG_STMPE811_TSC_DISABLE=n +CONFIG_STMPE811_ADC_DISABLE=y +CONFIG_STMPE811_GPIO_DISABLE=y +CONFIG_STMPE811_GPIOINT_DISABLE=y +CONFIG_STMPE811_SWAPXY=n +CONFIG_STMPE811_TEMP_DISABLE=y +CONFIG_STMPE811_REGDEBUG=n +CONFIG_STMPE811_THRESHX=39 +CONFIG_STMPE811_THRESHY=51 # # USB Device Configuration diff --git a/nuttx/configs/stm3220g-eval/src/Makefile b/nuttx/configs/stm3220g-eval/src/Makefile index 44cc7f1d1..96ad0d10c 100644 --- a/nuttx/configs/stm3220g-eval/src/Makefile +++ b/nuttx/configs/stm3220g-eval/src/Makefile @@ -84,8 +84,8 @@ ifeq ($(CONFIG_WATCHDOG),y) CSRCS += up_watchdog.c endif -ifeq ($(CONFIG_INPUT_STMPE11),y) -CSRCS += up_stmpe11.c +ifeq ($(CONFIG_INPUT_STMPE811),y) +CSRCS += up_stmpe811.c endif COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/stm3220g-eval/src/stm3220g-internal.h b/nuttx/configs/stm3220g-eval/src/stm3220g-internal.h index dcb7c7e1b..2391f3c4a 100644 --- a/nuttx/configs/stm3220g-eval/src/stm3220g-internal.h +++ b/nuttx/configs/stm3220g-eval/src/stm3220g-internal.h @@ -138,10 +138,10 @@ #define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTH|GPIO_PIN5) #define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTF|GPIO_PIN11) -/* The STM3220G-EVAL has two STMPE11QTR I/O expanders on board both connected +/* The STM3220G-EVAL has two STMPE811QTR I/O expanders on board both connected * to the STM32 via I2C1. They share a common interrupt line: PI2. * - * STMPE11 U24, I2C address 0x41 (7-bit) + * STMPE811 U24, I2C address 0x41 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -154,7 +154,7 @@ * IN1 EXP_IO11 * IN0 EXP_IO12 * - * STMPE11 U29, I2C address 0x44 (7-bit) + * STMPE811 U29, I2C address 0x44 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -168,8 +168,8 @@ * IN0 EXP_IO8 */ -#define STMPE11_ADDR1 0x41 -#define STMPE11_ADDR2 0x44 +#define STMPE811_ADDR1 0x41 +#define STMPE811_ADDR2 0x44 #define GPIO_IO_EXPANDER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTI|GPIO_PIN2) diff --git a/nuttx/configs/stm3220g-eval/src/up_stmpe11.c b/nuttx/configs/stm3220g-eval/src/up_stmpe811.c index eee765364..b07cc52bf 100644 --- a/nuttx/configs/stm3220g-eval/src/up_stmpe11.c +++ b/nuttx/configs/stm3220g-eval/src/up_stmpe811.c @@ -47,7 +47,7 @@ #include <nuttx/i2c.h> #include <nuttx/input/touchscreen.h> -#include <nuttx/input/stmpe11.h> +#include <nuttx/input/stmpe811.h> #include <arch/irq.h> @@ -59,44 +59,44 @@ ****************************************************************************/ /* Configuration ************************************************************/ -#ifdef CONFIG_INPUT_STMPE11 +#ifdef CONFIG_INPUT_STMPE811 #ifndef CONFIG_INPUT -# error "STMPE11 support requires CONFIG_INPUT" +# error "STMPE811 support requires CONFIG_INPUT" #endif #ifndef CONFIG_STM32_I2C1 -# error "STMPE11 support requires CONFIG_STM32_I2C1" +# error "STMPE811 support requires CONFIG_STM32_I2C1" #endif -#ifndef CONFIG_STMPE11_I2C -# error "Only the STMPE11 I2C interface is supported" +#ifndef CONFIG_STMPE811_I2C +# error "Only the STMPE811 I2C interface is supported" #endif -#ifdef CONFIG_STMPE11_SPI -# error "Only the STMPE11 SPI interface is supported" +#ifdef CONFIG_STMPE811_SPI +# error "Only the STMPE811 SPI interface is supported" #endif -#ifndef CONFIG_STMPE11_FREQUENCY -# define CONFIG_STMPE11_FREQUENCY 100000 +#ifndef CONFIG_STMPE811_FREQUENCY +# define CONFIG_STMPE811_FREQUENCY 100000 #endif -#ifndef CONFIG_STMPE11_I2CDEV -# define CONFIG_STMPE11_I2CDEV 1 +#ifndef CONFIG_STMPE811_I2CDEV +# define CONFIG_STMPE811_I2CDEV 1 #endif -#if CONFIG_STMPE11_I2CDEV != 1 -# error "CONFIG_STMPE11_I2CDEV must be one" +#if CONFIG_STMPE811_I2CDEV != 1 +# error "CONFIG_STMPE811_I2CDEV must be one" #endif -#ifndef CONFIG_STMPE11_DEVMINOR -# define CONFIG_STMPE11_DEVMINOR 0 +#ifndef CONFIG_STMPE811_DEVMINOR +# define CONFIG_STMPE811_DEVMINOR 0 #endif /* Board definitions ********************************************************/ -/* The STM3220G-EVAL has two STMPE11QTR I/O expanders on board both connected +/* The STM3220G-EVAL has two STMPE811QTR I/O expanders on board both connected * to the STM32 via I2C1. They share a common interrupt line: PI2. * - * STMPE11 U24, I2C address 0x41 (7-bit) + * STMPE811 U24, I2C address 0x41 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -109,7 +109,7 @@ * IN1 EXP_IO11 * IN0 EXP_IO12 * - * STMPE11 U29, I2C address 0x44 (7-bit) + * STMPE811 U29, I2C address 0x44 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -127,16 +127,16 @@ * Private Types ****************************************************************************/ -struct stm32_stmpe11config_s +struct stm32_stmpe811config_s { - /* Configuration structure as seen by the STMPE11 driver */ + /* Configuration structure as seen by the STMPE811 driver */ - struct stmpe11_config_s config; + struct stmpe811_config_s config; /* Additional private definitions only known to this driver */ - STMPE11_HANDLE handle; /* The STMPE11 driver handle */ - xcpt_t handler; /* The STMPE11 interrupt handler */ + STMPE811_HANDLE handle; /* The STMPE811 driver handle */ + xcpt_t handler; /* The STMPE811 interrupt handler */ }; /**************************************************************************** @@ -144,25 +144,25 @@ struct stm32_stmpe11config_s ****************************************************************************/ /* IRQ/GPIO access callbacks. These operations all hidden behind callbacks - * to isolate the STMPE11 driver from differences in GPIO + * to isolate the STMPE811 driver from differences in GPIO * interrupt handling by varying boards and MCUs.* so that contact and loss-of-contact events can be detected. * - * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt + * attach - Attach the STMPE811 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt */ -static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr); -static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable); -static void stmpe11_clear(FAR struct stmpe11_config_s *state); +static int stmpe811_attach(FAR struct stmpe811_config_s *state, xcpt_t isr); +static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable); +static void stmpe811_clear(FAR struct stmpe811_config_s *state); /**************************************************************************** * Private Data ****************************************************************************/ -/* A reference to a structure of this type must be passed to the STMPE11 +/* A reference to a structure of this type must be passed to the STMPE811 * driver. This structure provides information about the configuration - * of the STMPE11 and provides some board-specific hooks. + * of the STMPE811 and provides some board-specific hooks. * * Memory for this structure is provided by the caller. It is not copied * by the driver and is presumed to persist while the driver is active. The @@ -170,25 +170,25 @@ static void stmpe11_clear(FAR struct stmpe11_config_s *state); * may modify frequency or X plate resistance values. */ -#ifndef CONFIG_STMPE11_TSC_DISABLE -static struct stm32_stmpe11config_s g_stmpe11config = +#ifndef CONFIG_STMPE811_TSC_DISABLE +static struct stm32_stmpe811config_s g_stmpe811config = { .config = { -#ifdef CONFIG_STMPE11_I2C - .address = STMPE11_ADDR1, +#ifdef CONFIG_STMPE811_I2C + .address = STMPE811_ADDR1, #endif - .frequency = CONFIG_STMPE11_FREQUENCY, + .frequency = CONFIG_STMPE811_FREQUENCY, -#ifdef CONFIG_STMPE11_MULTIPLE +#ifdef CONFIG_STMPE811_MULTIPLE .irq = STM32_IRQ_EXTI2, #endif .ctrl1 = (ADC_CTRL1_SAMPLE_TIME_80 | ADC_CTRL1_MOD_12B), .ctrl2 = ADC_CTRL2_ADC_FREQ_3p25, - .attach = stmpe11_attach, - .enable = stmpe11_enable, - .clear = stmpe11_clear, + .attach = stmpe811_attach, + .enable = stmpe811_enable, + .clear = stmpe811_clear, }, .handler = NULL, }; @@ -199,17 +199,17 @@ static struct stm32_stmpe11config_s g_stmpe11config = ****************************************************************************/ /* IRQ/GPIO access callbacks. These operations all hidden behind - * callbacks to isolate the STMPE11 driver from differences in GPIO + * callbacks to isolate the STMPE811 driver from differences in GPIO * interrupt handling by varying boards and MCUs. * - * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt + * attach - Attach the STMPE811 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt */ -static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr) +static int stmpe811_attach(FAR struct stmpe811_config_s *state, xcpt_t isr) { - FAR struct stm32_stmpe11config_s *priv = (FAR struct stm32_stmpe11config_s *)state; + FAR struct stm32_stmpe811config_s *priv = (FAR struct stm32_stmpe811config_s *)state; ivdbg("Saving handler %p\n", isr); DEBUGASSERT(priv); @@ -220,9 +220,9 @@ static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr) return OK; } -static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable) +static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable) { - FAR struct stm32_stmpe11config_s *priv = (FAR struct stm32_stmpe11config_s *)state; + FAR struct stm32_stmpe811config_s *priv = (FAR struct stm32_stmpe811config_s *)state; irqstate_t flags; /* Attach and enable, or detach and disable. Enabling and disabling GPIO @@ -246,7 +246,7 @@ static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable) irqrestore(flags); } -static void stmpe11_clear(FAR struct stmpe11_config_s *state) +static void stmpe811_clear(FAR struct stmpe811_config_s *state) { /* Does nothing */ } @@ -275,7 +275,7 @@ static void stmpe11_clear(FAR struct stmpe11_config_s *state) int arch_tcinitialize(int minor) { -#ifndef CONFIG_STMPE11_TSC_DISABLE +#ifndef CONFIG_STMPE811_TSC_DISABLE FAR struct i2c_dev_s *dev; int ret; @@ -284,36 +284,36 @@ int arch_tcinitialize(int minor) /* Check if we are already initialized */ - if (!g_stmpe11config.handle) + if (!g_stmpe811config.handle) { ivdbg("Initializing\n"); - /* Configure the STMPE11 interrupt pin as an input */ + /* Configure the STMPE811 interrupt pin as an input */ (void)stm32_configgpio(GPIO_IO_EXPANDER); /* Get an instance of the I2C interface */ - dev = up_i2cinitialize(CONFIG_STMPE11_I2CDEV); + dev = up_i2cinitialize(CONFIG_STMPE811_I2CDEV); if (!dev) { - idbg("Failed to initialize I2C bus %d\n", CONFIG_STMPE11_I2CDEV); + idbg("Failed to initialize I2C bus %d\n", CONFIG_STMPE811_I2CDEV); return -ENODEV; } - /* Instantiate the STMPE11 driver */ + /* Instantiate the STMPE811 driver */ - g_stmpe11config.handle = - stmpe11_instantiate(dev, (FAR struct stmpe11_config_s *)&g_stmpe11config); - if (!g_stmpe11config.handle) + g_stmpe811config.handle = + stmpe811_instantiate(dev, (FAR struct stmpe811_config_s *)&g_stmpe811config); + if (!g_stmpe811config.handle) { - idbg("Failed to instantiate the STMPE11 driver\n"); + idbg("Failed to instantiate the STMPE811 driver\n"); return -ENODEV; } /* Initialize and register the I2C touchscreen device */ - ret = stmpe11_register(g_stmpe11config.handle, CONFIG_STMPE11_DEVMINOR); + ret = stmpe811_register(g_stmpe811config.handle, CONFIG_STMPE811_DEVMINOR); if (ret < 0) { idbg("Failed to register STMPE driver: %d\n", ret); @@ -346,8 +346,8 @@ int arch_tcinitialize(int minor) void arch_tcuninitialize(void) { - /* No support for un-initializing the touchscreen STMPE11 device yet */ + /* No support for un-initializing the touchscreen STMPE811 device yet */ } -#endif /* CONFIG_INPUT_STMPE11 */ +#endif /* CONFIG_INPUT_STMPE811 */ diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt index 64d5608f3..acf94fadc 100755 --- a/nuttx/configs/stm3240g-eval/README.txt +++ b/nuttx/configs/stm3240g-eval/README.txt @@ -500,10 +500,10 @@ There are 4 possible SRAM configurations: I/O Expanders ============= -The STM3240G-EVAL has two STMPE11QTR I/O expanders on board both connected to +The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected to the STM32 via I2C1. They share a common interrupt line: PI2. -STMPE11 U24, I2C address 0x41 (7-bit) +STMPE811 U24, I2C address 0x41 (7-bit) ------ ---- ---------------- -------------------------------------------- STPE11 PIN BOARD SIGNAL BOARD CONNECTION ------ ---- ---------------- -------------------------------------------- @@ -516,7 +516,7 @@ STPE11 PIN BOARD SIGNAL BOARD CONNECTION IN1 EXP_IO11 IN0 EXP_IO12 -STMPE11 U29, I2C address 0x44 (7-bit) +STMPE811 U29, I2C address 0x44 (7-bit) ------ ---- ---------------- -------------------------------------------- STPE11 PIN BOARD SIGNAL BOARD CONNECTION ------ ---- ---------------- -------------------------------------------- diff --git a/nuttx/configs/stm3240g-eval/nsh/appconfig b/nuttx/configs/stm3240g-eval/nsh/appconfig index f126b0d80..fdef72ccd 100644 --- a/nuttx/configs/stm3240g-eval/nsh/appconfig +++ b/nuttx/configs/stm3240g-eval/nsh/appconfig @@ -80,7 +80,7 @@ ifeq ($(CONFIG_WATCHDOG),y) CONFIGURED_APPS += examples/watchdog endif -ifeq ($(CONFIG_INPUT_STMPE11),y) +ifeq ($(CONFIG_INPUT_STMPE811),y) CONFIGURED_APPS += examples/touchscreen endif diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig index 26b29a51d..a3e31622b 100644 --- a/nuttx/configs/stm3240g-eval/nsh/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh/defconfig @@ -954,66 +954,66 @@ CONFIG_INPUT=n CONFIG_INPUT_TSC2007=n # -# STMPE11 input device configuration +# STMPE811 input device configuration # # Prerequisites: CONFIG_INPUT=y # Other settings that effect the driver: CONFIG_DISABLE_POLL # -# CONFIG_INPUT_STMPE11 -# Enables support for the STMPE11 driver (Needs CONFIG_INPUT) -# CONFIG_STMPE11_SPI +# CONFIG_INPUT_STMPE811 +# Enables support for the STMPE811 driver (Needs CONFIG_INPUT) +# CONFIG_STMPE811_SPI # Enables support for the SPI interface (not currenly supported) -# CONFIG_STMPE11_I2C +# CONFIG_STMPE811_I2C # Enables support for the I2C interface -# CONFIG_STMPE11_MULTIPLE -# Can be defined to support multiple STMPE11 devices on board. -# CONFIG_STMPE11_ACTIVELOW +# CONFIG_STMPE811_MULTIPLE +# Can be defined to support multiple STMPE811 devices on board. +# CONFIG_STMPE811_ACTIVELOW # Interrupt is generated by an active low signal (or falling edge). -# CONFIG_STMPE11_EDGE +# CONFIG_STMPE811_EDGE # Interrupt is generated on an edge (vs. on the active level) -# CONFIG_STMPE11_NPOLLWAITERS +# CONFIG_STMPE811_NPOLLWAITERS # Maximum number of threads that can be waiting on poll() (ignored if # CONFIG_DISABLE_POLL is set). -# CONFIG_STMPE11_TSC_DISABLE +# CONFIG_STMPE811_TSC_DISABLE # Disable driver touchscreen functionality. -# CONFIG_STMPE11_ADC_DISABLE +# CONFIG_STMPE811_ADC_DISABLE # Disable driver ADC functionality. -# CONFIG_STMPE11_GPIO_DISABLE +# CONFIG_STMPE811_GPIO_DISABLE # Disable driver GPIO functionality. -# CONFIG_STMPE11_GPIOINT_DISABLE +# CONFIG_STMPE811_GPIOINT_DISABLE # Disable driver GPIO interrupt functionality (ignored if GPIO functionality is # disabled). -# CONFIG_STMPE11_SWAPXY +# CONFIG_STMPE811_SWAPXY # Reverse the meaning of X and Y to handle different LCD orientations. # For the STM3240G-EVAL, X and Y should be swapped in PORTRAIT modes -# CONFIG_STMPE11_TEMP_DISABLE +# CONFIG_STMPE811_TEMP_DISABLE # Disable driver temperature sensor functionality. -# CONFIG_STMPE11_REGDBUG +# CONFIG_STMPE811_REGDBUG # Enabled very low register-level debug output. Requires CONFIG_DEBUG. -# CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY -# STMPE11 touchscreen data comes in a a very high rate. New touch positions +# CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY +# STMPE811 touchscreen data comes in a a very high rate. New touch positions # will only be reported when the X or Y data changes by these thresholds. # This trades reduces data rate for some loss in dragging accuracy. The -# STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So +# STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So # for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 # would correspond to one pixel. Default: 12 # -CONFIG_INPUT_STMPE11=n -CONFIG_STMPE11_SPI=n -CONFIG_STMPE11_I2C=y -CONFIG_STMPE11_MULTIPLE=y -CONFIG_STMPE11_ACTIVELOW=y -CONFIG_STMPE11_EDGE=y -#CONFIG_STMPE11_NPOLLWAITERS -CONFIG_STMPE11_TSC_DISABLE=n -CONFIG_STMPE11_ADC_DISABLE=y -CONFIG_STMPE11_GPIO_DISABLE=y -CONFIG_STMPE11_GPIOINT_DISABLE=y -CONFIG_STMPE11_SWAPXY=y -CONFIG_STMPE11_TEMP_DISABLE=y -CONFIG_STMPE11_REGDEBUG=n -CONFIG_STMPE11_THRESHX=26 -CONFIG_STMPE11_THRESHY=34 +CONFIG_INPUT_STMPE811=n +CONFIG_STMPE811_SPI=n +CONFIG_STMPE811_I2C=y +CONFIG_STMPE811_MULTIPLE=y +CONFIG_STMPE811_ACTIVELOW=y +CONFIG_STMPE811_EDGE=y +#CONFIG_STMPE811_NPOLLWAITERS +CONFIG_STMPE811_TSC_DISABLE=n +CONFIG_STMPE811_ADC_DISABLE=y +CONFIG_STMPE811_GPIO_DISABLE=y +CONFIG_STMPE811_GPIOINT_DISABLE=y +CONFIG_STMPE811_SWAPXY=y +CONFIG_STMPE811_TEMP_DISABLE=y +CONFIG_STMPE811_REGDEBUG=n +CONFIG_STMPE811_THRESHX=26 +CONFIG_STMPE811_THRESHY=34 # # USB Device Configuration diff --git a/nuttx/configs/stm3240g-eval/nxwm/defconfig b/nuttx/configs/stm3240g-eval/nxwm/defconfig index c449042e6..38739b35b 100644 --- a/nuttx/configs/stm3240g-eval/nxwm/defconfig +++ b/nuttx/configs/stm3240g-eval/nxwm/defconfig @@ -956,66 +956,66 @@ CONFIG_INPUT=y CONFIG_INPUT_TSC2007=n # -# STMPE11 input device configuration +# STMPE811 input device configuration # # Prerequisites: CONFIG_INPUT=y # Other settings that effect the driver: CONFIG_DISABLE_POLL # -# CONFIG_INPUT_STMPE11 -# Enables support for the STMPE11 driver (Needs CONFIG_INPUT) -# CONFIG_STMPE11_SPI +# CONFIG_INPUT_STMPE811 +# Enables support for the STMPE811 driver (Needs CONFIG_INPUT) +# CONFIG_STMPE811_SPI # Enables support for the SPI interface (not currenly supported) -# CONFIG_STMPE11_I2C +# CONFIG_STMPE811_I2C # Enables support for the I2C interface -# CONFIG_STMPE11_MULTIPLE -# Can be defined to support multiple STMPE11 devices on board. -# CONFIG_STMPE11_ACTIVELOW +# CONFIG_STMPE811_MULTIPLE +# Can be defined to support multiple STMPE811 devices on board. +# CONFIG_STMPE811_ACTIVELOW # Interrupt is generated by an active low signal (or falling edge). -# CONFIG_STMPE11_EDGE +# CONFIG_STMPE811_EDGE # Interrupt is generated on an edge (vs. on the active level) -# CONFIG_STMPE11_NPOLLWAITERS +# CONFIG_STMPE811_NPOLLWAITERS # Maximum number of threads that can be waiting on poll() (ignored if # CONFIG_DISABLE_POLL is set). -# CONFIG_STMPE11_TSC_DISABLE +# CONFIG_STMPE811_TSC_DISABLE # Disable driver touchscreen functionality. -# CONFIG_STMPE11_ADC_DISABLE +# CONFIG_STMPE811_ADC_DISABLE # Disable driver ADC functionality. -# CONFIG_STMPE11_GPIO_DISABLE +# CONFIG_STMPE811_GPIO_DISABLE # Disable driver GPIO functionality. -# CONFIG_STMPE11_GPIOINT_DISABLE +# CONFIG_STMPE811_GPIOINT_DISABLE # Disable driver GPIO interrupt functionality (ignored if GPIO functionality is # disabled). -# CONFIG_STMPE11_SWAPXY +# CONFIG_STMPE811_SWAPXY # Reverse the meaning of X and Y to handle different LCD orientations. # For the STM3240G-EVAL, X and Y should be swapped in PORTRAIT modes -# CONFIG_STMPE11_TEMP_DISABLE +# CONFIG_STMPE811_TEMP_DISABLE # Disable driver temperature sensor functionality. -# CONFIG_STMPE11_REGDBUG +# CONFIG_STMPE811_REGDBUG # Enabled very low register-level debug output. Requires CONFIG_DEBUG. -# CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY -# STMPE11 touchscreen data comes in a a very high rate. New touch positions +# CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY +# STMPE811 touchscreen data comes in a a very high rate. New touch positions # will only be reported when the X or Y data changes by these thresholds. # This trades reduces data rate for some loss in dragging accuracy. The -# STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So +# STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So # for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 # would correspond to one pixel. Default: 12 # -CONFIG_INPUT_STMPE11=y -CONFIG_STMPE11_SPI=n -CONFIG_STMPE11_I2C=y -CONFIG_STMPE11_MULTIPLE=y -CONFIG_STMPE11_ACTIVELOW=y -CONFIG_STMPE11_EDGE=y -#CONFIG_STMPE11_NPOLLWAITERS -CONFIG_STMPE11_TSC_DISABLE=n -CONFIG_STMPE11_ADC_DISABLE=y -CONFIG_STMPE11_GPIO_DISABLE=y -CONFIG_STMPE11_GPIOINT_DISABLE=y -CONFIG_STMPE11_SWAPXY=n -CONFIG_STMPE11_TEMP_DISABLE=y -CONFIG_STMPE11_REGDEBUG=n -CONFIG_STMPE11_THRESHX=39 -CONFIG_STMPE11_THRESHY=51 +CONFIG_INPUT_STMPE811=y +CONFIG_STMPE811_SPI=n +CONFIG_STMPE811_I2C=y +CONFIG_STMPE811_MULTIPLE=y +CONFIG_STMPE811_ACTIVELOW=y +CONFIG_STMPE811_EDGE=y +#CONFIG_STMPE811_NPOLLWAITERS +CONFIG_STMPE811_TSC_DISABLE=n +CONFIG_STMPE811_ADC_DISABLE=y +CONFIG_STMPE811_GPIO_DISABLE=y +CONFIG_STMPE811_GPIOINT_DISABLE=y +CONFIG_STMPE811_SWAPXY=n +CONFIG_STMPE811_TEMP_DISABLE=y +CONFIG_STMPE811_REGDEBUG=n +CONFIG_STMPE811_THRESHX=39 +CONFIG_STMPE811_THRESHY=51 # # USB Device Configuration diff --git a/nuttx/configs/stm3240g-eval/src/Makefile b/nuttx/configs/stm3240g-eval/src/Makefile index 548c1c8c0..0e901a4d1 100644 --- a/nuttx/configs/stm3240g-eval/src/Makefile +++ b/nuttx/configs/stm3240g-eval/src/Makefile @@ -88,8 +88,8 @@ ifeq ($(CONFIG_WATCHDOG),y) CSRCS += up_watchdog.c endif -ifeq ($(CONFIG_INPUT_STMPE11),y) -CSRCS += up_stmpe11.c +ifeq ($(CONFIG_INPUT_STMPE811),y) +CSRCS += up_stmpe811.c endif COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h index 3dfd79912..c71aee75f 100644 --- a/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h +++ b/nuttx/configs/stm3240g-eval/src/stm3240g-internal.h @@ -138,10 +138,10 @@ #define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTH|GPIO_PIN5) #define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTF|GPIO_PIN11) -/* The STM3240G-EVAL has two STMPE11QTR I/O expanders on board both connected +/* The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected * to the STM32 via I2C1. They share a common interrupt line: PI2. * - * STMPE11 U24, I2C address 0x41 (7-bit) + * STMPE811 U24, I2C address 0x41 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -154,7 +154,7 @@ * IN1 EXP_IO11 * IN0 EXP_IO12 * - * STMPE11 U29, I2C address 0x44 (7-bit) + * STMPE811 U29, I2C address 0x44 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -168,8 +168,8 @@ * IN0 EXP_IO8 */ -#define STMPE11_ADDR1 0x41 -#define STMPE11_ADDR2 0x44 +#define STMPE811_ADDR1 0x41 +#define STMPE811_ADDR2 0x44 #define GPIO_IO_EXPANDER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTI|GPIO_PIN2) diff --git a/nuttx/configs/stm3240g-eval/src/up_stmpe11.c b/nuttx/configs/stm3240g-eval/src/up_stmpe811.c index 72482c92c..a64d62825 100644 --- a/nuttx/configs/stm3240g-eval/src/up_stmpe11.c +++ b/nuttx/configs/stm3240g-eval/src/up_stmpe811.c @@ -47,7 +47,7 @@ #include <nuttx/i2c.h> #include <nuttx/input/touchscreen.h> -#include <nuttx/input/stmpe11.h> +#include <nuttx/input/stmpe811.h> #include <arch/irq.h> @@ -59,44 +59,44 @@ ****************************************************************************/ /* Configuration ************************************************************/ -#ifdef CONFIG_INPUT_STMPE11 +#ifdef CONFIG_INPUT_STMPE811 #ifndef CONFIG_INPUT -# error "STMPE11 support requires CONFIG_INPUT" +# error "STMPE811 support requires CONFIG_INPUT" #endif #ifndef CONFIG_STM32_I2C1 -# error "STMPE11 support requires CONFIG_STM32_I2C1" +# error "STMPE811 support requires CONFIG_STM32_I2C1" #endif -#ifndef CONFIG_STMPE11_I2C -# error "Only the STMPE11 I2C interface is supported" +#ifndef CONFIG_STMPE811_I2C +# error "Only the STMPE811 I2C interface is supported" #endif -#ifdef CONFIG_STMPE11_SPI -# error "Only the STMPE11 SPI interface is supported" +#ifdef CONFIG_STMPE811_SPI +# error "Only the STMPE811 SPI interface is supported" #endif -#ifndef CONFIG_STMPE11_FREQUENCY -# define CONFIG_STMPE11_FREQUENCY 100000 +#ifndef CONFIG_STMPE811_FREQUENCY +# define CONFIG_STMPE811_FREQUENCY 100000 #endif -#ifndef CONFIG_STMPE11_I2CDEV -# define CONFIG_STMPE11_I2CDEV 1 +#ifndef CONFIG_STMPE811_I2CDEV +# define CONFIG_STMPE811_I2CDEV 1 #endif -#if CONFIG_STMPE11_I2CDEV != 1 -# error "CONFIG_STMPE11_I2CDEV must be one" +#if CONFIG_STMPE811_I2CDEV != 1 +# error "CONFIG_STMPE811_I2CDEV must be one" #endif -#ifndef CONFIG_STMPE11_DEVMINOR -# define CONFIG_STMPE11_DEVMINOR 0 +#ifndef CONFIG_STMPE811_DEVMINOR +# define CONFIG_STMPE811_DEVMINOR 0 #endif /* Board definitions ********************************************************/ -/* The STM3240G-EVAL has two STMPE11QTR I/O expanders on board both connected +/* The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected * to the STM32 via I2C1. They share a common interrupt line: PI2. * - * STMPE11 U24, I2C address 0x41 (7-bit) + * STMPE811 U24, I2C address 0x41 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -109,7 +109,7 @@ * IN1 EXP_IO11 * IN0 EXP_IO12 * - * STMPE11 U29, I2C address 0x44 (7-bit) + * STMPE811 U29, I2C address 0x44 (7-bit) * ------ ---- ---------------- -------------------------------------------- * STPE11 PIN BOARD SIGNAL BOARD CONNECTION * ------ ---- ---------------- -------------------------------------------- @@ -127,16 +127,16 @@ * Private Types ****************************************************************************/ -struct stm32_stmpe11config_s +struct stm32_stmpe811config_s { - /* Configuration structure as seen by the STMPE11 driver */ + /* Configuration structure as seen by the STMPE811 driver */ - struct stmpe11_config_s config; + struct stmpe811_config_s config; /* Additional private definitions only known to this driver */ - STMPE11_HANDLE handle; /* The STMPE11 driver handle */ - xcpt_t handler; /* The STMPE11 interrupt handler */ + STMPE811_HANDLE handle; /* The STMPE811 driver handle */ + xcpt_t handler; /* The STMPE811 interrupt handler */ }; /**************************************************************************** @@ -144,25 +144,25 @@ struct stm32_stmpe11config_s ****************************************************************************/ /* IRQ/GPIO access callbacks. These operations all hidden behind callbacks - * to isolate the STMPE11 driver from differences in GPIO + * to isolate the STMPE811 driver from differences in GPIO * interrupt handling by varying boards and MCUs.* so that contact and loss-of-contact events can be detected. * - * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt + * attach - Attach the STMPE811 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt */ -static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr); -static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable); -static void stmpe11_clear(FAR struct stmpe11_config_s *state); +static int stmpe811_attach(FAR struct stmpe811_config_s *state, xcpt_t isr); +static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable); +static void stmpe811_clear(FAR struct stmpe811_config_s *state); /**************************************************************************** * Private Data ****************************************************************************/ -/* A reference to a structure of this type must be passed to the STMPE11 +/* A reference to a structure of this type must be passed to the STMPE811 * driver. This structure provides information about the configuration - * of the STMPE11 and provides some board-specific hooks. + * of the STMPE811 and provides some board-specific hooks. * * Memory for this structure is provided by the caller. It is not copied * by the driver and is presumed to persist while the driver is active. The @@ -170,25 +170,25 @@ static void stmpe11_clear(FAR struct stmpe11_config_s *state); * may modify frequency or X plate resistance values. */ -#ifndef CONFIG_STMPE11_TSC_DISABLE -static struct stm32_stmpe11config_s g_stmpe11config = +#ifndef CONFIG_STMPE811_TSC_DISABLE +static struct stm32_stmpe811config_s g_stmpe811config = { .config = { -#ifdef CONFIG_STMPE11_I2C - .address = STMPE11_ADDR1, +#ifdef CONFIG_STMPE811_I2C + .address = STMPE811_ADDR1, #endif - .frequency = CONFIG_STMPE11_FREQUENCY, + .frequency = CONFIG_STMPE811_FREQUENCY, -#ifdef CONFIG_STMPE11_MULTIPLE +#ifdef CONFIG_STMPE811_MULTIPLE .irq = STM32_IRQ_EXTI2, #endif .ctrl1 = (ADC_CTRL1_SAMPLE_TIME_80 | ADC_CTRL1_MOD_12B), .ctrl2 = ADC_CTRL2_ADC_FREQ_3p25, - .attach = stmpe11_attach, - .enable = stmpe11_enable, - .clear = stmpe11_clear, + .attach = stmpe811_attach, + .enable = stmpe811_enable, + .clear = stmpe811_clear, }, .handler = NULL, }; @@ -199,17 +199,17 @@ static struct stm32_stmpe11config_s g_stmpe11config = ****************************************************************************/ /* IRQ/GPIO access callbacks. These operations all hidden behind - * callbacks to isolate the STMPE11 driver from differences in GPIO + * callbacks to isolate the STMPE811 driver from differences in GPIO * interrupt handling by varying boards and MCUs. * - * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt + * attach - Attach the STMPE811 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt */ -static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr) +static int stmpe811_attach(FAR struct stmpe811_config_s *state, xcpt_t isr) { - FAR struct stm32_stmpe11config_s *priv = (FAR struct stm32_stmpe11config_s *)state; + FAR struct stm32_stmpe811config_s *priv = (FAR struct stm32_stmpe811config_s *)state; ivdbg("Saving handler %p\n", isr); DEBUGASSERT(priv); @@ -220,9 +220,9 @@ static int stmpe11_attach(FAR struct stmpe11_config_s *state, xcpt_t isr) return OK; } -static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable) +static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable) { - FAR struct stm32_stmpe11config_s *priv = (FAR struct stm32_stmpe11config_s *)state; + FAR struct stm32_stmpe811config_s *priv = (FAR struct stm32_stmpe811config_s *)state; irqstate_t flags; /* Attach and enable, or detach and disable. Enabling and disabling GPIO @@ -246,7 +246,7 @@ static void stmpe11_enable(FAR struct stmpe11_config_s *state, bool enable) irqrestore(flags); } -static void stmpe11_clear(FAR struct stmpe11_config_s *state) +static void stmpe811_clear(FAR struct stmpe811_config_s *state) { /* Does nothing */ } @@ -275,7 +275,7 @@ static void stmpe11_clear(FAR struct stmpe11_config_s *state) int arch_tcinitialize(int minor) { -#ifndef CONFIG_STMPE11_TSC_DISABLE +#ifndef CONFIG_STMPE811_TSC_DISABLE FAR struct i2c_dev_s *dev; int ret; @@ -284,36 +284,36 @@ int arch_tcinitialize(int minor) /* Check if we are already initialized */ - if (!g_stmpe11config.handle) + if (!g_stmpe811config.handle) { ivdbg("Initializing\n"); - /* Configure the STMPE11 interrupt pin as an input */ + /* Configure the STMPE811 interrupt pin as an input */ (void)stm32_configgpio(GPIO_IO_EXPANDER); /* Get an instance of the I2C interface */ - dev = up_i2cinitialize(CONFIG_STMPE11_I2CDEV); + dev = up_i2cinitialize(CONFIG_STMPE811_I2CDEV); if (!dev) { - idbg("Failed to initialize I2C bus %d\n", CONFIG_STMPE11_I2CDEV); + idbg("Failed to initialize I2C bus %d\n", CONFIG_STMPE811_I2CDEV); return -ENODEV; } - /* Instantiate the STMPE11 driver */ + /* Instantiate the STMPE811 driver */ - g_stmpe11config.handle = - stmpe11_instantiate(dev, (FAR struct stmpe11_config_s *)&g_stmpe11config); - if (!g_stmpe11config.handle) + g_stmpe811config.handle = + stmpe811_instantiate(dev, (FAR struct stmpe811_config_s *)&g_stmpe811config); + if (!g_stmpe811config.handle) { - idbg("Failed to instantiate the STMPE11 driver\n"); + idbg("Failed to instantiate the STMPE811 driver\n"); return -ENODEV; } /* Initialize and register the I2C touchscreen device */ - ret = stmpe11_register(g_stmpe11config.handle, CONFIG_STMPE11_DEVMINOR); + ret = stmpe811_register(g_stmpe811config.handle, CONFIG_STMPE811_DEVMINOR); if (ret < 0) { idbg("Failed to register STMPE driver: %d\n", ret); @@ -346,8 +346,8 @@ int arch_tcinitialize(int minor) void arch_tcuninitialize(void) { - /* No support for un-initializing the touchscreen STMPE11 device yet */ + /* No support for un-initializing the touchscreen STMPE811 device yet */ } -#endif /* CONFIG_INPUT_STMPE11 */ +#endif /* CONFIG_INPUT_STMPE811 */ diff --git a/nuttx/drivers/input/Make.defs b/nuttx/drivers/input/Make.defs index c7c715b70..aaf08b827 100644 --- a/nuttx/drivers/input/Make.defs +++ b/nuttx/drivers/input/Make.defs @@ -47,19 +47,19 @@ ifeq ($(CONFIG_INPUT_ADS7843E),y) CSRCS += ads7843e.c endif -ifeq ($(CONFIG_INPUT_STMPE11),y) - CSRCS += stmpe11_base.c -ifneq ($(CONFIG_INPUT_STMPE11_TSC_DISABLE),y) - CSRCS += stmpe11_tsc.c +ifeq ($(CONFIG_INPUT_STMPE811),y) + CSRCS += stmpe811_base.c +ifneq ($(CONFIG_INPUT_STMPE811_TSC_DISABLE),y) + CSRCS += stmpe811_tsc.c endif -ifneq ($(CONFIG_INPUT_STMPE11_GPIO_DISABLE),y) - CSRCS += stmpe11_gpio.c +ifneq ($(CONFIG_INPUT_STMPE811_GPIO_DISABLE),y) + CSRCS += stmpe811_gpio.c endif -ifneq ($(CONFIG_INPUT_STMPE11_ADC_DISABLE),y) - CSRCS += stmpe11_adc.c +ifneq ($(CONFIG_INPUT_STMPE811_ADC_DISABLE),y) + CSRCS += stmpe811_adc.c endif -ifneq ($(CONFIG_INPUT_STMPE11_TEMP_DISABLE),y) - CSRCS += stmpe11_temp.c +ifneq ($(CONFIG_INPUT_STMPE811_TEMP_DISABLE),y) + CSRCS += stmpe811_temp.c endif endif diff --git a/nuttx/drivers/input/stmpe11.h b/nuttx/drivers/input/stmpe811.h index 05917fc37..05917fc37 100644 --- a/nuttx/drivers/input/stmpe11.h +++ b/nuttx/drivers/input/stmpe811.h diff --git a/nuttx/drivers/input/stmpe11_adc.c b/nuttx/drivers/input/stmpe811_adc.c index 5b9d045c9..5b9d045c9 100644 --- a/nuttx/drivers/input/stmpe11_adc.c +++ b/nuttx/drivers/input/stmpe811_adc.c diff --git a/nuttx/drivers/input/stmpe11_base.c b/nuttx/drivers/input/stmpe811_base.c index 8e2900610..8e2900610 100644 --- a/nuttx/drivers/input/stmpe11_base.c +++ b/nuttx/drivers/input/stmpe811_base.c diff --git a/nuttx/drivers/input/stmpe11_gpio.c b/nuttx/drivers/input/stmpe811_gpio.c index 82024b4d0..82024b4d0 100644 --- a/nuttx/drivers/input/stmpe11_gpio.c +++ b/nuttx/drivers/input/stmpe811_gpio.c diff --git a/nuttx/drivers/input/stmpe11_temp.c b/nuttx/drivers/input/stmpe811_temp.c index b3eb8f6c5..b3eb8f6c5 100644 --- a/nuttx/drivers/input/stmpe11_temp.c +++ b/nuttx/drivers/input/stmpe811_temp.c diff --git a/nuttx/drivers/input/stmpe11_tsc.c b/nuttx/drivers/input/stmpe811_tsc.c index 03ede7302..03ede7302 100644 --- a/nuttx/drivers/input/stmpe11_tsc.c +++ b/nuttx/drivers/input/stmpe811_tsc.c diff --git a/nuttx/include/nuttx/input/stmpe11.h b/nuttx/include/nuttx/input/stmpe811.h index 2436437e6..489ac333c 100644 --- a/nuttx/include/nuttx/input/stmpe11.h +++ b/nuttx/include/nuttx/input/stmpe811.h @@ -1,5 +1,5 @@ /******************************************************************************************** - * include/nuttx/input/stmpe11.h + * include/nuttx/input/stmpe811.h * * Copyright (C) 2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> @@ -37,8 +37,8 @@ * ********************************************************************************************/ -#ifndef __INCLUDE_NUTTX_INPUT_STMPE11_H -#define __INCLUDE_NUTTX_INPUT_STMPE11_H +#ifndef __INCLUDE_NUTTX_INPUT_STMPE811_H +#define __INCLUDE_NUTTX_INPUT_STMPE811_H /******************************************************************************************** * Included Files @@ -51,7 +51,7 @@ #include <nuttx/irq.h> -#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_STMPE11) +#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_STMPE811) /******************************************************************************************** * Pre-Processor Definitions @@ -60,37 +60,37 @@ /* Prerequisites: CONFIG_INPUT=y * Other settings that effect the driver: CONFIG_DISABLE_POLL * - * CONFIG_INPUT_STMPE11 - * Enables support for the STMPE11 driver (Needs CONFIG_INPUT) - * CONFIG_STMPE11_SPI + * CONFIG_INPUT_STMPE811 + * Enables support for the STMPE811 driver (Needs CONFIG_INPUT) + * CONFIG_STMPE811_SPI * Enables support for the SPI interface (not currenly supported) - * CONFIG_STMPE11_I2C + * CONFIG_STMPE811_I2C * Enables support for the I2C interface - * CONFIG_STMPE11_MULTIPLE - * Can be defined to support multiple STMPE11 devices on board. - * CONFIG_STMPE11_NPOLLWAITERS + * CONFIG_STMPE811_MULTIPLE + * Can be defined to support multiple STMPE811 devices on board. + * CONFIG_STMPE811_NPOLLWAITERS * Maximum number of threads that can be waiting on poll() (ignored if * CONFIG_DISABLE_POLL is set). - * CONFIG_STMPE11_TSC_DISABLE + * CONFIG_STMPE811_TSC_DISABLE * Disable driver touchscreen functionality. - * CONFIG_STMPE11_ADC_DISABLE + * CONFIG_STMPE811_ADC_DISABLE * Disable driver ADC functionality. - * CONFIG_STMPE11_GPIO_DISABLE + * CONFIG_STMPE811_GPIO_DISABLE * Disable driver GPIO functionality. - * CONFIG_STMPE11_GPIOINT_DISABLE + * CONFIG_STMPE811_GPIOINT_DISABLE * Disable driver GPIO interrupt functionlality (ignored if GPIO functionality is * disabled). - * CONFIG_STMPE11_SWAPXY + * CONFIG_STMPE811_SWAPXY * Reverse the meaning of X and Y to handle different LCD orientations. - * CONFIG_STMPE11_TEMP_DISABLE + * CONFIG_STMPE811_TEMP_DISABLE * Disable driver temperature sensor functionality. - * CONFIG_STMPE11_REGDEBUG + * CONFIG_STMPE811_REGDEBUG * Enabled very low register-level debug output. Requires CONFIG_DEBUG. - * CONFIG_STMPE11_THRESHX and CONFIG_STMPE11_THRESHY - * STMPE11 touchscreen data comes in a a very high rate. New touch positions + * CONFIG_STMPE811_THRESHX and CONFIG_STMPE811_THRESHY + * STMPE811 touchscreen data comes in a a very high rate. New touch positions * will only be reported when the X or Y data changes by these thresholds. * This trades reduces data rate for some loss in dragging accuracy. The - * STMPE11 is configure for 12-bit values so the raw ranges are 0-4095. So + * STMPE811 is configure for 12-bit values so the raw ranges are 0-4095. So * for example, if your display is 320x240, then THRESHX=13 and THRESHY=17 * would correspond to one pixel. Default: 12 */ @@ -99,25 +99,25 @@ * allows the selection of interface protocol at reset state. */ -#if !defined(CONFIG_STMPE11_SPI) && !defined(CONFIG_STMPE11_I2C) -# error "One of CONFIG_STMPE11_SPI or CONFIG_STMPE11_I2C must be defined" +#if !defined(CONFIG_STMPE811_SPI) && !defined(CONFIG_STMPE811_I2C) +# error "One of CONFIG_STMPE811_SPI or CONFIG_STMPE811_I2C must be defined" #endif -#if defined(CONFIG_STMPE11_SPI) && defined(CONFIG_STMPE11_I2C) -# error "Only one of CONFIG_STMPE11_SPI or CONFIG_STMPE11_I2C can be defined" +#if defined(CONFIG_STMPE811_SPI) && defined(CONFIG_STMPE811_I2C) +# error "Only one of CONFIG_STMPE811_SPI or CONFIG_STMPE811_I2C can be defined" #endif /* Maximum number of threads than can be waiting for POLL events */ -#ifndef CONFIG_STMPE11_NPOLLWAITERS -# define CONFIG_STMPE11_NPOLLWAITERS 2 +#ifndef CONFIG_STMPE811_NPOLLWAITERS +# define CONFIG_STMPE811_NPOLLWAITERS 2 #endif /* Check for some required settings. This can save the user a lot of time * in getting the right configuration. */ -#ifdef CONFIG_STMPE11_I2C +#ifdef CONFIG_STMPE811_I2C # ifndef CONFIG_I2C # error "CONFIG_I2C is required in the I2C support" # endif @@ -136,100 +136,100 @@ /* Thresholds */ -#ifndef CONFIG_STMPE11_THRESHX -# define CONFIG_STMPE11_THRESHX 12 +#ifndef CONFIG_STMPE811_THRESHX +# define CONFIG_STMPE811_THRESHX 12 #endif -#ifndef CONFIG_STMPE11_THRESHY -# define CONFIG_STMPE11_THRESHY 12 +#ifndef CONFIG_STMPE811_THRESHY +# define CONFIG_STMPE811_THRESHY 12 #endif /* Debug output */ #ifndef CONFIG_DEBUG -# undef CONFIG_STMPE11_REGDEBUG +# undef CONFIG_STMPE811_REGDEBUG #endif /* I2C **************************************************************************************/ -/* STMPE11 Address: The STMPE11 may have 7-bit address 0x41 or 0x44, depending upon the +/* STMPE811 Address: The STMPE811 may have 7-bit address 0x41 or 0x44, depending upon the * state of the ADDR0 pin. */ -#define STMPE11_I2C_ADDRESS_MASK (0x78) /* Bits 3-7: Invariant part of STMPE11 address */ -#define STMPE11_I2C_ADDRESS (0x40) /* Bits 3-7: Always set at '0100 0xxR' */ -#define STMPE11_I2C_A1 (1 << 2) /* Bit 2: A1 */ -#define STMPE11_I2C_A0 (1 << 1) /* Bit 1: A0 */ -#define STMPE11_I2C_READ (1 << 0) /* Bit 0=1: Selects read operation */ -#define STMPE11_I2C_WRITE (0) /* Bit 0=0: Selects write operation */ +#define STMPE811_I2C_ADDRESS_MASK (0x78) /* Bits 3-7: Invariant part of STMPE811 address */ +#define STMPE811_I2C_ADDRESS (0x40) /* Bits 3-7: Always set at '0100 0xxR' */ +#define STMPE811_I2C_A1 (1 << 2) /* Bit 2: A1 */ +#define STMPE811_I2C_A0 (1 << 1) /* Bit 1: A0 */ +#define STMPE811_I2C_READ (1 << 0) /* Bit 0=1: Selects read operation */ +#define STMPE811_I2C_WRITE (0) /* Bit 0=0: Selects write operation */ /* I2C frequency */ -#define STMPE11_I2C_MAXFREQUENCY 400000 /* 400KHz */ +#define STMPE811_I2C_MAXFREQUENCY 400000 /* 400KHz */ /* SPI **************************************************************************************/ /* The device always operates in mode 0 */ -#define STMPE11_SPI_MODE SPIDEV_MODE0 /* Mode 0 */ +#define STMPE811_SPI_MODE SPIDEV_MODE0 /* Mode 0 */ /* I2C frequency */ -#define STMPE11_SPI_MAXFREQUENCY 1000000 /* 1MHz */ +#define STMPE811_SPI_MAXFREQUENCY 1000000 /* 1MHz */ -/* STMPE11 Registers ************************************************************************/ +/* STMPE811 Registers ************************************************************************/ /* Register Addresses */ -#define STMPE11_CHIP_ID 0x00 /* Device identification (16-bit) */ -#define STMPE11_ID_VER 0x02 /* Revision number: 0x01=sample 0x03=final silicon */ -#define STMPE11_SYS_CTRL1 0x03 /* Reset control */ -#define STMPE11_SYS_CTRL2 0x04 /* Clock control */ -#define STMPE11_SPI_CFG 0x08 /* SPI interface configuration */ -#define STMPE11_INT_CTRL 0x09 /* Interrupt control register */ -#define STMPE11_INT_EN 0x0a /* Interrupt enable register */ -#define STMPE11_INT_STA 0x0b /* Interrupt status register */ -#define STMPE11_GPIO_EN 0x0c /* GPIO interrupt enable register */ -#define STMPE11_GPIO_INTSTA 0x0d /* GPIO interrupt status register */ -#define STMPE11_ADC_INTEN 0x0e /* ADC interrupt enable register */ -#define STMPE11_ADC_INTSTA 0x0f /* ADC interrupt status register */ -#define STMPE11_GPIO_SETPIN 0x10 /* GPIO set pin register */ -#define STMPE11_GPIO_CLRPIN 0x11 /* GPIO clear pin register */ -#define STMPE11_GPIO_MPSTA 0x12 /* GPIO monitor pin state register */ -#define STMPE11_GPIO_DIR 0x13 /* GPIO direction register */ -#define STMPE11_GPIO_ED 0x14 /* GPIO edge detect register */ -#define STMPE11_GPIO_RE 0x15 /* GPIO rising edge register */ -#define STMPE11_GPIO_FE 0x16 /* GPIO falling edge register */ -#define STMPE11_GPIO_AF 0x17 /* Alternate function register */ -#define STMPE11_ADC_CTRL1 0x20 /* ADC control */ -#define STMPE11_ADC_CTRL2 0x21 /* ADC control */ -#define STMPE11_ADC_CAPT 0x22 /* To initiate ADC data acquisition */ -#define STMPE11_ADC_DATACH(n) (0x30 + ((n) << 1)) /* ADC channel n (16-bit) */ -#define STMPE11_ADC_DATACH0 0x30 /* ADC channel 0 (16-bit) */ -#define STMPE11_ADC_DATACH1 0x32 /* ADC channel 1 (16_bit) */ -#define STMPE11_ADC_DATACH2 0x34 /* ADC channel 2 (16-bit) */ -#define STMPE11_ADC_DATACH3 0x36 /* ADC channel 3 (16-bit) */ -#define STMPE11_ADC_DATACH4 0x38 /* ADC channel 4 (16-bit) */ -#define STMPE11_ADC_DATACH5 0x3a /* ADC channel 5 (16-bit) */ -#define STMPE11_ADC_DATACH6 0x3c /* ADC channel 6 (16-bit) */ -#define STMPE11_ADC_DATACH7 0x3e /* ADC channel 7 (16-bit) */ -#define STMPE11_TSC_CTRL 0x40 /* 4-wire touchscreen controller setup */ -#define STMPE11_TSC_CFG 0x41 /* Touchscreen controller configuration */ -#define STMPE11_WDW_TRX 0x42 /* Window setup for top right X (16-bit) */ -#define STMPE11_WDW_TRY 0x44 /* Window setup for top right Y (16-bit) */ -#define STMPE11_WDW_BLX 0x46 /* Window setup for bottom left X (16-bit) */ -#define STMPE11_WDW_BLY 0x48 /* Window setup for bottom left Y (16-bit) */ -#define STMPE11_FIFO_TH 0x4a /* FIFO level to generate interrupt */ -#define STMPE11_FIFO_STA 0x4b /* Current status of FIFO */ -#define STMPE11_FIFO_SIZE 0x4c /* Current filled level of FIFO */ -#define STMPE11_TSC_DATAX 0x4d /* Data port for touchscreen (16-bit) */ -#define STMPE11_TSC_DATAY 0x4f /* Data port for touchscreen (16-bit) */ -#define STMPE11_TSC_DATAZ 0x51 /* Data port for touchscreen */ -#define STMPE11_TSC_DATAXYZ 0x52 /* Data port for touchscreen (32-bit) */ -#define STMPE11_TSC_FRACTIONZ 0x56 /* Touchscreen controller FRACTION_Z */ -#define STMPE11_TSC_DATA 0x57 /* Data port for touchscreen */ -#define STMPE11_TSC_IDRIVE 0x58 /* Touchscreen controller drive I */ -#define STMPE11_TSC_SHIELD 0x59 /* Touchscreen controller shield */ -#define STMPE11_TEMP_CTRL 0x60 /* Temperature sensor setup */ -#define STMPE11_TEMP_DATA 0x61 /* Temperature data access port */ -#define STMPE11_TEMP_TH 0x62 /* Threshold for temperature controlled interrupt */ +#define STMPE811_CHIP_ID 0x00 /* Device identification (16-bit) */ +#define STMPE811_ID_VER 0x02 /* Revision number: 0x01=sample 0x03=final silicon */ +#define STMPE811_SYS_CTRL1 0x03 /* Reset control */ +#define STMPE811_SYS_CTRL2 0x04 /* Clock control */ +#define STMPE811_SPI_CFG 0x08 /* SPI interface configuration */ +#define STMPE811_INT_CTRL 0x09 /* Interrupt control register */ +#define STMPE811_INT_EN 0x0a /* Interrupt enable register */ +#define STMPE811_INT_STA 0x0b /* Interrupt status register */ +#define STMPE811_GPIO_EN 0x0c /* GPIO interrupt enable register */ +#define STMPE811_GPIO_INTSTA 0x0d /* GPIO interrupt status register */ +#define STMPE811_ADC_INTEN 0x0e /* ADC interrupt enable register */ +#define STMPE811_ADC_INTSTA 0x0f /* ADC interrupt status register */ +#define STMPE811_GPIO_SETPIN 0x10 /* GPIO set pin register */ +#define STMPE811_GPIO_CLRPIN 0x11 /* GPIO clear pin register */ +#define STMPE811_GPIO_MPSTA 0x12 /* GPIO monitor pin state register */ +#define STMPE811_GPIO_DIR 0x13 /* GPIO direction register */ +#define STMPE811_GPIO_ED 0x14 /* GPIO edge detect register */ +#define STMPE811_GPIO_RE 0x15 /* GPIO rising edge register */ +#define STMPE811_GPIO_FE 0x16 /* GPIO falling edge register */ +#define STMPE811_GPIO_AF 0x17 /* Alternate function register */ +#define STMPE811_ADC_CTRL1 0x20 /* ADC control */ +#define STMPE811_ADC_CTRL2 0x21 /* ADC control */ +#define STMPE811_ADC_CAPT 0x22 /* To initiate ADC data acquisition */ +#define STMPE811_ADC_DATACH(n) (0x30 + ((n) << 1)) /* ADC channel n (16-bit) */ +#define STMPE811_ADC_DATACH0 0x30 /* ADC channel 0 (16-bit) */ +#define STMPE811_ADC_DATACH1 0x32 /* ADC channel 1 (16_bit) */ +#define STMPE811_ADC_DATACH2 0x34 /* ADC channel 2 (16-bit) */ +#define STMPE811_ADC_DATACH3 0x36 /* ADC channel 3 (16-bit) */ +#define STMPE811_ADC_DATACH4 0x38 /* ADC channel 4 (16-bit) */ +#define STMPE811_ADC_DATACH5 0x3a /* ADC channel 5 (16-bit) */ +#define STMPE811_ADC_DATACH6 0x3c /* ADC channel 6 (16-bit) */ +#define STMPE811_ADC_DATACH7 0x3e /* ADC channel 7 (16-bit) */ +#define STMPE811_TSC_CTRL 0x40 /* 4-wire touchscreen controller setup */ +#define STMPE811_TSC_CFG 0x41 /* Touchscreen controller configuration */ +#define STMPE811_WDW_TRX 0x42 /* Window setup for top right X (16-bit) */ +#define STMPE811_WDW_TRY 0x44 /* Window setup for top right Y (16-bit) */ +#define STMPE811_WDW_BLX 0x46 /* Window setup for bottom left X (16-bit) */ +#define STMPE811_WDW_BLY 0x48 /* Window setup for bottom left Y (16-bit) */ +#define STMPE811_FIFO_TH 0x4a /* FIFO level to generate interrupt */ +#define STMPE811_FIFO_STA 0x4b /* Current status of FIFO */ +#define STMPE811_FIFO_SIZE 0x4c /* Current filled level of FIFO */ +#define STMPE811_TSC_DATAX 0x4d /* Data port for touchscreen (16-bit) */ +#define STMPE811_TSC_DATAY 0x4f /* Data port for touchscreen (16-bit) */ +#define STMPE811_TSC_DATAZ 0x51 /* Data port for touchscreen */ +#define STMPE811_TSC_DATAXYZ 0x52 /* Data port for touchscreen (32-bit) */ +#define STMPE811_TSC_FRACTIONZ 0x56 /* Touchscreen controller FRACTION_Z */ +#define STMPE811_TSC_DATA 0x57 /* Data port for touchscreen */ +#define STMPE811_TSC_IDRIVE 0x58 /* Touchscreen controller drive I */ +#define STMPE811_TSC_SHIELD 0x59 /* Touchscreen controller shield */ +#define STMPE811_TEMP_CTRL 0x60 /* Temperature sensor setup */ +#define STMPE811_TEMP_DATA 0x61 /* Temperature data access port */ +#define STMPE811_TEMP_TH 0x62 /* Threshold for temperature controlled interrupt */ /* Register bit definitions */ @@ -402,7 +402,7 @@ #define TEMP_CTRL_THRES_RANGE (1 << 4) /* Bit 4: temperature threshold enable, 0='>=' 1='<' */ /* GPIO Configuration ***********************************************************************/ -/* The STMPE11 GPIO interfaces take an 8-bit bit-encoded parameter to describe the GPIO pin. +/* The STMPE811 GPIO interfaces take an 8-bit bit-encoded parameter to describe the GPIO pin. * The following definitions describe the bit-encoding of that parameter. * * 7654 3210 @@ -416,37 +416,37 @@ * Bits 7 is the pin direction. */ -#define STMPE11_GPIO_DIR (1 << 7) /* Bit7: Direction bit */ -#define STMPE11_GPIO_INPUT (1 << 7) /* Input pin (possibly interrupting) */ -#define STMPE11_GPIO_OUTPUT (0) /* Configure as in output */ +#define STMPE811_GPIO_DIR (1 << 7) /* Bit7: Direction bit */ +#define STMPE811_GPIO_INPUT (1 << 7) /* Input pin (possibly interrupting) */ +#define STMPE811_GPIO_OUTPUT (0) /* Configure as in output */ /* Bit 6 indicates that the pin will generate an interrupt (inputs only) */ -#define STMPE11_GPIO_IN (1 << 6) /* Bit 6: Input interrupting pin */ +#define STMPE811_GPIO_IN (1 << 6) /* Bit 6: Input interrupting pin */ /* The bits 4-5 select the rising and/or the falling edge detection. */ -#define STMPE11_GPIO_RISING (1 << 5) /* Bit 5: Input interrupting pin */ -#define STMPE11_GPIO_FALLING (1 << 4) /* Bit 4: Input interrupting pin */ +#define STMPE811_GPIO_RISING (1 << 5) /* Bit 5: Input interrupting pin */ +#define STMPE811_GPIO_FALLING (1 << 4) /* Bit 4: Input interrupting pin */ /* Bit 3 is the initial value for output pins */ -#define STMPE11_GPIO_VALUE (1 << 3) /* Bit 3: The initial value of an output pin */ -# define STMPE11_GPIO_ONE (1 << 3) /* Bit 3: The initial value is logic 1 */ -# define STMPE11_GPIO_ZERO (0) /* Bit 3: The initial value is logic 0 */ +#define STMPE811_GPIO_VALUE (1 << 3) /* Bit 3: The initial value of an output pin */ +# define STMPE811_GPIO_ONE (1 << 3) /* Bit 3: The initial value is logic 1 */ +# define STMPE811_GPIO_ZERO (0) /* Bit 3: The initial value is logic 0 */ /* Bits 0-2 is the pin number */ -#define STMPE11_GPIO_PIN_SHIFT (0) -#define STMPE11_GPIO_PIN_MASK (7 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN0 (0 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN1 (1 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN2 (2 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN3 (3 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN4 (4 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN5 (5 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN6 (6 << STMPE11_GPIO_PIN_SHIFT) -# define STMPE11_GPIO_PIN7 (7 << STMPE11_GPIO_PIN_SHIFT) +#define STMPE811_GPIO_PIN_SHIFT (0) +#define STMPE811_GPIO_PIN_MASK (7 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN0 (0 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN1 (1 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN2 (2 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN3 (3 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN4 (4 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN5 (5 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN6 (6 << STMPE811_GPIO_PIN_SHIFT) +# define STMPE811_GPIO_PIN7 (7 << STMPE811_GPIO_PIN_SHIFT) /******************************************************************************************** * Public Types @@ -456,31 +456,31 @@ * handler but rather from the context of the worker thread with interrupts enabled. */ -typedef void (*stmpe11_handler_t)(int pin); +typedef void (*stmpe811_handler_t)(int pin); -/* A reference to a structure of this type must be passed to the STMPE11 driver when the +/* A reference to a structure of this type must be passed to the STMPE811 driver when the * driver is instantiaed. This structure provides information about the configuration of the - * STMPE11 and provides some board-specific hooks. + * STMPE811 and provides some board-specific hooks. * * Memory for this structure is provided by the caller. It is not copied by the driver * and is presumed to persist while the driver is active. The memory must be writable * because, under certain circumstances, the driver may modify the frequency. */ -struct stmpe11_config_s +struct stmpe811_config_s { /* Device characterization */ -#ifdef CONFIG_STMPE11_I2C +#ifdef CONFIG_STMPE811_I2C uint8_t address; /* 7-bit I2C address (only bits 0-6 used) */ #endif uint32_t frequency; /* I2C or SPI frequency */ - /* If multiple STMPE11 devices are supported, then an IRQ number must + /* If multiple STMPE811 devices are supported, then an IRQ number must * be provided for each so that their interrupts can be distinguished. */ -#ifdef CONFIG_STMPE11_MULTIPLE +#ifdef CONFIG_STMPE811_MULTIPLE int irq; /* IRQ number received by interrupt handler. */ #endif @@ -489,32 +489,32 @@ struct stmpe11_config_s * determine the characteristics of sampling. */ -#if !defined(CONFIG_STMPE11_ADC_DISABLE) || !defined(CONFIG_STMPE11_TSC_DISABLE) +#if !defined(CONFIG_STMPE811_ADC_DISABLE) || !defined(CONFIG_STMPE811_TSC_DISABLE) uint8_t ctrl1; /* Initialization value for ADC CTRL1 */ uint8_t ctrl2; /* Initialization value for ADC CTRL1 */ #endif /* IRQ/GPIO access callbacks. These operations all hidden behind - * callbacks to isolate the STMPE11 driver from differences in GPIO + * callbacks to isolate the STMPE811 driver from differences in GPIO * interrupt handling by varying boards and MCUs. * - * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt + * attach - Attach the STMPE811 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt */ - int (*attach)(FAR struct stmpe11_config_s *state, xcpt_t isr); - void (*enable)(FAR struct stmpe11_config_s *state, bool enable); - void (*clear)(FAR struct stmpe11_config_s *state); + int (*attach)(FAR struct stmpe811_config_s *state, xcpt_t isr); + void (*enable)(FAR struct stmpe811_config_s *state, bool enable); + void (*clear)(FAR struct stmpe811_config_s *state); }; -/* Since the STMPE11 is a multi-function device, no functionality is assumed when the device +/* Since the STMPE811 is a multi-function device, no functionality is assumed when the device * is first created. Rather, a multi-step initialization is required. When - * stmpe11_instantiate is called, it returns a handle of the following type. That handle may - * then be used to enable a configure the STMPE11 functionality. + * stmpe811_instantiate is called, it returns a handle of the following type. That handle may + * then be used to enable a configure the STMPE811 functionality. */ -typedef FAR void *STMPE11_HANDLE; +typedef FAR void *STMPE811_HANDLE; /******************************************************************************************** * Public Function Prototypes @@ -528,10 +528,10 @@ extern "C" { #endif /******************************************************************************************** - * Name: stmpe11_instantiate + * Name: stmpe811_instantiate * * Description: - * Instantiate and configure the STMPE11 device driver to use the provided I2C or SPI + * Instantiate and configure the STMPE811 device driver to use the provided I2C or SPI * device instance. * * Input Parameters: @@ -540,27 +540,27 @@ extern "C" { * * Returned Value: * A non-zero handle is returned on success. This handle may then be used to configure - * the STMPE11 driver as necessary. A NULL handle value is returned on failure. + * the STMPE811 driver as necessary. A NULL handle value is returned on failure. * ********************************************************************************************/ -#ifdef CONFIG_STMPE11_SPI -EXTERN STMPE11_HANDLE stmpe11_instantiate(FAR struct spi_dev_s *dev, - FAR struct stmpe11_config_s *config); +#ifdef CONFIG_STMPE811_SPI +EXTERN STMPE811_HANDLE stmpe811_instantiate(FAR struct spi_dev_s *dev, + FAR struct stmpe811_config_s *config); #else -EXTERN STMPE11_HANDLE stmpe11_instantiate(FAR struct i2c_dev_s *dev, - FAR struct stmpe11_config_s *config); +EXTERN STMPE811_HANDLE stmpe811_instantiate(FAR struct i2c_dev_s *dev, + FAR struct stmpe811_config_s *config); #endif /******************************************************************************************** - * Name: stmpe11_register + * Name: stmpe811_register * * Description: * Enable TSC functionality. GPIO4-7 must be available. This function will register the * touchsceen driver as /dev/inputN where N is the minor device number * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * minor - The input device minor number * * Returned Value: @@ -569,18 +569,18 @@ EXTERN STMPE11_HANDLE stmpe11_instantiate(FAR struct i2c_dev_s *dev, * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_TSC_DISABLE -EXTERN int stmpe11_register(STMPE11_HANDLE handle, int minor); +#ifndef CONFIG_STMPE811_TSC_DISABLE +EXTERN int stmpe811_register(STMPE811_HANDLE handle, int minor); #endif /******************************************************************************************** - * Name: stmpe11_gpioconfig + * Name: stmpe811_gpioconfig * * Description: - * Configure an STMPE11 GPIO pin + * Configure an STMPE811 GPIO pin * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pinconfig - Bit-encoded pin configuration * * Returned Value: @@ -589,18 +589,18 @@ EXTERN int stmpe11_register(STMPE11_HANDLE handle, int minor); * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_GPIO_DISABLE -EXTERN int stmpe11_gpioconfig(STMPE11_HANDLE handle, uint8_t pinconfig); +#ifndef CONFIG_STMPE811_GPIO_DISABLE +EXTERN int stmpe811_gpioconfig(STMPE811_HANDLE handle, uint8_t pinconfig); #endif /******************************************************************************************** - * Name: stmpe11_gpiowrite + * Name: stmpe811_gpiowrite * * Description: * Set or clear the GPIO output * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pinconfig - Bit-encoded pin configuration * value = true: write logic '1'; false: write logic '0; * @@ -609,18 +609,18 @@ EXTERN int stmpe11_gpioconfig(STMPE11_HANDLE handle, uint8_t pinconfig); * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_GPIO_DISABLE -EXTERN void stmpe11_gpiowrite(STMPE11_HANDLE handle, uint8_t pinconfig, bool value); +#ifndef CONFIG_STMPE811_GPIO_DISABLE +EXTERN void stmpe811_gpiowrite(STMPE811_HANDLE handle, uint8_t pinconfig, bool value); #endif /******************************************************************************************** - * Name: stmpe11_gpioread + * Name: stmpe811_gpioread * * Description: * Set or clear the GPIO output * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pinconfig - Bit-encoded pin configuration * value - The location to return the state of the GPIO pin * @@ -630,12 +630,12 @@ EXTERN void stmpe11_gpiowrite(STMPE11_HANDLE handle, uint8_t pinconfig, bool val * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_GPIO_DISABLE -EXTERN int stmpe11_gpioread(STMPE11_HANDLE handle, uint8_t pinconfig, bool *value); +#ifndef CONFIG_STMPE811_GPIO_DISABLE +EXTERN int stmpe811_gpioread(STMPE811_HANDLE handle, uint8_t pinconfig, bool *value); #endif /******************************************************************************************** - * Name: stmpe11_gpioattach + * Name: stmpe811_gpioattach * * Description: * Attach to a GPIO interrupt input pin and enable interrupts on the pin. Using the value @@ -645,7 +645,7 @@ EXTERN int stmpe11_gpioread(STMPE11_HANDLE handle, uint8_t pinconfig, bool *valu * of the worker thread with interrupts enabled. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pinconfig - Bit-encoded pin configuration * handler - The handler that will be called when the interrupt occurs. * @@ -655,19 +655,19 @@ EXTERN int stmpe11_gpioread(STMPE11_HANDLE handle, uint8_t pinconfig, bool *valu * ********************************************************************************************/ -#if !defined(CONFIG_STMPE11_GPIO_DISABLE) && !defined(CONFIG_STMPE11_GPIOINT_DISABLE) -EXTERN int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, - stmpe11_handler_t handler); +#if !defined(CONFIG_STMPE811_GPIO_DISABLE) && !defined(CONFIG_STMPE811_GPIOINT_DISABLE) +EXTERN int stmpe811_gpioattach(STMPE811_HANDLE handle, uint8_t pinconfig, + stmpe811_handler_t handler); #endif /******************************************************************************************** - * Name: stmpe11_adcinitialize + * Name: stmpe811_adcinitialize * * Description: * Configure for ADC mode operation. Set overall ADC ADC timing that applies to all pins. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is returned to indicate @@ -675,18 +675,18 @@ EXTERN int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_ADC_DISABLE -EXTERN int stmpe11_adcinitialize(STMPE11_HANDLE handle); +#ifndef CONFIG_STMPE811_ADC_DISABLE +EXTERN int stmpe811_adcinitialize(STMPE811_HANDLE handle); #endif /******************************************************************************************** - * Name: stmpe11_adcconfig + * Name: stmpe811_adcconfig * * Description: * Configure a pin for ADC input. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pin - The ADC pin number * * Returned Value: @@ -695,18 +695,18 @@ EXTERN int stmpe11_adcinitialize(STMPE11_HANDLE handle); * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_ADC_DISABLE -EXTERN int stmpe11_adcconfig(STMPE11_HANDLE handle, int pin); +#ifndef CONFIG_STMPE811_ADC_DISABLE +EXTERN int stmpe811_adcconfig(STMPE811_HANDLE handle, int pin); #endif /******************************************************************************************** - * Name: stmpe11_adcread + * Name: stmpe811_adcread * * Description: * Read the converted analog input value from the select pin. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * pin - The ADC pin number * * Returned Value: @@ -714,18 +714,18 @@ EXTERN int stmpe11_adcconfig(STMPE11_HANDLE handle, int pin); * ********************************************************************************************/ -#ifndef CONFIG_STMPE11_ADC_DISABLE -EXTERN uint16_t stmpe11_adcread(STMPE11_HANDLE handle, int pin); +#ifndef CONFIG_STMPE811_ADC_DISABLE +EXTERN uint16_t stmpe811_adcread(STMPE811_HANDLE handle, int pin); #endif /******************************************************************************************** - * Name: stmpe11_tempinitialize + * Name: stmpe811_tempinitialize * * Description: * Configure the temperature sensor. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is returned to indicate @@ -733,16 +733,16 @@ EXTERN uint16_t stmpe11_adcread(STMPE11_HANDLE handle, int pin); * ********************************************************************************************/ -EXTERN int stmpe11_tempinitialize(STMPE11_HANDLE handle); +EXTERN int stmpe811_tempinitialize(STMPE811_HANDLE handle); /******************************************************************************************** - * Name: stmpe11_tempread + * Name: stmpe811_tempread * * Description: * Configure the temperature sensor. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is returned to indicate @@ -750,10 +750,10 @@ EXTERN int stmpe11_tempinitialize(STMPE11_HANDLE handle); * ********************************************************************************************/ -EXTERN uint16_t stmpe11_tempread(STMPE11_HANDLE handle); +EXTERN uint16_t stmpe811_tempread(STMPE811_HANDLE handle); /******************************************************************************************** - * Name: stmpe11_tempinterrupt + * Name: stmpe811_tempinterrupt * * Description: * Configure the temperature sensor to sample the temperature periodically. @@ -761,7 +761,7 @@ EXTERN uint16_t stmpe11_tempread(STMPE11_HANDLE handle); * to the client using the provide callback function pointer. * * Input Parameters: - * handle - The handle previously returned by stmpe11_instantiate + * handle - The handle previously returned by stmpe811_instantiate * threshold - The threshold temperature value * direction - True: Generate an interrupt if the temperate exceeds the * threshold value; False: Generate an interrupt if the @@ -781,5 +781,5 @@ EXTERN uint16_t stmpe11_tempread(STMPE11_HANDLE handle); } #endif -#endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE11 */ -#endif /* __INCLUDE_NUTTX_INPUT_STMPE11_H */ +#endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE811 */ +#endif /* __INCLUDE_NUTTX_INPUT_STMPE811_H */ |