Script cleanup, WIP on mavlink logging

1 files changed, 121 insertions, 0 deletions

diff --git a/ROMFS/px4fmu_common/init.d/31_io_phantom b/ROMFS/px4fmu_common/init.d/31_io_phantom
new file mode 100644
index 000000000..5090b98a4
--- /dev/null
+++ b/ROMFS/px4fmu_common/init.d/31_io_phantom
@@ -0,0 +1,121 @@
+#!nsh
+#
+# Flight startup script for PX4FMU+PX4IO
+#
+ 
+# disable USB and autostart
+set USB no
+set MODE custom
+ 
+#
+# Start the ORB (first app to start)
+#
+uorb start
+ 
+#
+# Load microSD params
+#
+echo "[init] loading microSD params"
+param select /fs/microsd/params
+if [ -f /fs/microsd/params ]
+then
+	param load /fs/microsd/params
+fi
+
+#
+# Load default params for this platform
+#
+if param compare SYS_AUTOCONFIG 1
+then
+	# Set all params here, then disable autoconfig
+	param set SYS_AUTOCONFIG 0
+	param save /fs/microsd/params
+fi
+ 
+#
+# Force some key parameters to sane values
+# MAV_TYPE     1 = fixed wing, 2 = quadrotor, 13 = hexarotor
+#              see https://pixhawk.ethz.ch/mavlink/
+#
+param set MAV_TYPE 1
+ 
+#
+# Check if PX4IO Firmware should be upgraded (from Andrew Tridgell)
+#
+if [ -f /fs/microsd/px4io.bin ]
+then
+	echo "PX4IO Firmware found. Checking Upgrade.."
+	if cmp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current
+	then
+		echo "No newer version, skipping upgrade."
+	else
+		echo "Loading /fs/microsd/px4io.bin"
+		if px4io update /fs/microsd/px4io.bin > /fs/microsd/px4io_update.log
+		then
+			cp /fs/microsd/px4io.bin /fs/microsd/px4io.bin.current
+			echo "Flashed /fs/microsd/px4io.bin OK" >> /fs/microsd/px4io_update.log
+		else
+			echo "Failed flashing /fs/microsd/px4io.bin" >> /fs/microsd/px4io_update.log
+			echo "Failed to upgrade PX4IO firmware - check if PX4IO is in bootloader mode"
+		fi
+	fi
+fi
+ 
+#
+# Start MAVLink (depends on orb)
+#
+mavlink start -d /dev/ttyS1 -b 57600
+usleep 5000
+ 
+#
+# Start the commander (depends on orb, mavlink)
+#
+commander start
+ 
+#
+# Start PX4IO interface (depends on orb, commander)
+#
+px4io start
+ 
+#
+# Allow PX4IO to recover from midair restarts.
+# this is very unlikely, but quite safe and robust.
+px4io recovery
+
+#
+# Set actuator limit to 100 Hz update (50 Hz PWM)
+px4io limit 100
+ 
+#
+# Start the sensors (depends on orb, px4io)
+#
+sh /etc/init.d/rc.sensors
+ 
+#
+# Start GPS interface (depends on orb)
+#
+gps start
+ 
+#
+# Start the attitude estimator (depends on orb)
+#
+kalman_demo start
+ 
+#
+# Load mixer and start controllers (depends on px4io)
+#
+mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
+control_demo start
+ 
+#
+# Start logging
+#
+sdlog2 start -r 50 -a -b 14
+ 
+#
+# Start system state
+#
+if blinkm start
+then
+	blinkm systemstate
+fi