diff options
| author | Julian Oes <julian@oes.ch> | 2014-02-12 17:10:20 +0100 |
|---|---|---|
| committer | Julian Oes <julian@oes.ch> | 2014-02-12 17:10:20 +0100 |
| commit | 3462054f73dda9303fcb1b2b5ba0a6f0882ddbd9 (patch) | |
| tree | 511c63dcc6aae5222c6685e3f1648b2d8f5b2c6b /ROMFS | |
| parent | 76ae004e5c6c1dcc05f1eb784f6dc14cff2a3671 (diff) | |
| parent | 03cfb79b29a81443665208396ba8fc0ab67a021a (diff) | |
| download | px4-firmware-3462054f73dda9303fcb1b2b5ba0a6f0882ddbd9.tar.gz px4-firmware-3462054f73dda9303fcb1b2b5ba0a6f0882ddbd9.tar.bz2 px4-firmware-3462054f73dda9303fcb1b2b5ba0a6f0882ddbd9.zip | |
Merge remote-tracking branch 'px4/beta' into beta_mavlink
Conflicts:
src/modules/mavlink/mavlink.c
src/modules/mavlink/mavlink_receiver.h
src/modules/mavlink/orb_listener.c
Diffstat (limited to 'ROMFS')
55 files changed, 380 insertions, 1203 deletions
diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil index ebe8a1a1e..36194ad68 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -2,44 +2,13 @@ # # HILStar / X-Plane # -# Maintainers: Thomas Gubler <thomasgubler@gmail.com> +# Lorenz Meier <lm@inf.ethz.ch> # -echo "HIL Rascal 110 starting.." - -if [ $DO_AUTOCONFIG == yes ] -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 +sh /etc/init.d/rc.fw_defaults - param set SYS_AUTOCONFIG 0 - param save -fi +echo "HIL Rascal 110 starting.." set HIL yes -set VEHICLE_TYPE fw set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery index 56c74a3b5..880e4899b 100644 --- a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery +++ b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery @@ -2,28 +2,28 @@ # # Team Blacksheep Discovery Quadcopter # -# Maintainers: Simon Wilks <sjwilks@gmail.com> +# Anton Babushkin <anton.babushkin@me.com>, Simon Wilks <sjwilks@gmail.com> # +sh /etc/init.d/rc.mc_defaults + if [ $DO_AUTOCONFIG == yes ] then - # - # Default parameters for this platform - # - param set MC_ATT_P 5.0 - param set MC_ATT_I 0.0 - param set MC_YAW_P 0.5 - param set MC_YAW_I 0.15 - param set MC_ATTRATE_P 0.17 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.006 - param set MC_YAWRATE_P 0.2 + # TODO review MC_YAWRATE_I + param set MC_ROLL_P 8.0 + param set MC_ROLLRATE_P 0.07 + param set MC_ROLLRATE_I 0.05 + param set MC_ROLLRATE_D 0.0017 + param set MC_PITCH_P 8.0 + param set MC_PITCHRATE_P 0.14 + param set MC_PITCHRATE_I 0.1 + param set MC_PITCHRATE_D 0.0025 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.28 param set MC_YAWRATE_I 0.0 param set MC_YAWRATE_D 0.0 fi -set VEHICLE_TYPE mc set MIXER FMU_quad_w set PWM_OUTPUTS 1234 -set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/10016_3dr_iris b/ROMFS/px4fmu_common/init.d/10016_3dr_iris index a3bcb63eb..d691a6f2e 100644 --- a/ROMFS/px4fmu_common/init.d/10016_3dr_iris +++ b/ROMFS/px4fmu_common/init.d/10016_3dr_iris @@ -2,48 +2,31 @@ # # 3DR Iris Quadcopter # -# Maintainers: Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton.babushkin@me.com> # +sh /etc/init.d/rc.mc_defaults + if [ $DO_AUTOCONFIG == yes ] then - # - # Default parameters for this platform - # - param set MC_ATT_P 9.0 - param set MC_ATT_I 0.0 + # TODO tune roll/pitch separately + param set MC_ROLL_P 9.0 + param set MC_ROLLRATE_P 0.13 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.004 + param set MC_PITCH_P 9.0 + param set MC_PITCHRATE_P 0.13 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.004 param set MC_YAW_P 0.5 - param set MC_YAW_I 0.15 - param set MC_ATTRATE_P 0.13 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 param set MC_YAWRATE_P 0.2 param set MC_YAWRATE_I 0.0 param set MC_YAWRATE_D 0.0 - - param set MPC_TILT_MAX 1.0 - param set MPC_THR_MAX 1.0 - param set MPC_THR_MIN 0.1 - param set MPC_XY_P 1.0 - param set MPC_XY_VEL_D 0.01 - param set MPC_XY_VEL_I 0.02 - param set MPC_XY_VEL_MAX 5 - param set MPC_XY_VEL_P 0.1 - param set MPC_Z_P 1.0 - param set MPC_Z_VEL_D 0.0 - param set MPC_Z_VEL_I 0.02 - param set MPC_Z_VEL_MAX 3 - param set MPC_Z_VEL_P 0.1 param set BAT_V_SCALING 0.00989 param set BAT_C_SCALING 0.0124 fi -set VEHICLE_TYPE mc set MIXER FMU_quad_w set PWM_OUTPUTS 1234 -set PWM_RATE 400 -set PWM_DISARMED 900 -set PWM_MIN 1000 -set PWM_MAX 2000 diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil index 2d497374a..7a7a9542c 100644 --- a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil +++ b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil @@ -2,41 +2,11 @@ # # HIL Quadcopter X # -# Maintainers: Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton.babushkin@me.com> # -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_YAW_P 2.0 - param set MC_YAW_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - param set MPC_TILT_MAX 1.0 - param set MPC_THR_MAX 1.0 - param set MPC_THR_MIN 0.1 - param set MPC_XY_P 1.0 - param set MPC_XY_VEL_D 0.01 - param set MPC_XY_VEL_I 0.02 - param set MPC_XY_VEL_MAX 5 - param set MPC_XY_VEL_P 0.1 - param set MPC_Z_P 1.0 - param set MPC_Z_VEL_D 0.0 - param set MPC_Z_VEL_I 0.02 - param set MPC_Z_VEL_MAX 3 - param set MPC_Z_VEL_P 0.1 -fi +sh /etc/init.d/rc.mc_defaults -set HIL yes - -set VEHICLE_TYPE mc set MIXER FMU_quad_x + +set HIL yes diff --git a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil deleted file mode 100644 index 46da24d35..000000000 --- a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil +++ /dev/null @@ -1,45 +0,0 @@ -#!nsh -# -# HIL Rascal 110 (Flightgear) -# -# Maintainers: Thomas Gubler <thomasgubler@gmail.com> -# - -echo "HIL Rascal 110 starting.." - -if [ $DO_AUTOCONFIG == yes ] -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -set HIL yes - -set VEHICLE_TYPE fw -set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil index e95844891..c47500c7a 100644 --- a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil +++ b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil @@ -2,9 +2,11 @@ # # HIL Quadcopter + # -# Maintainers: Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton.babushkin@me.com> # -sh /etc/init.d/1001_rc_quad_x.hil +sh /etc/init.d/rc.mc_defaults set MIXER FMU_quad_+ + +set HIL yes
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil index 46da24d35..4e3e18326 100644 --- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil +++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil @@ -2,44 +2,13 @@ # # HIL Rascal 110 (Flightgear) # -# Maintainers: Thomas Gubler <thomasgubler@gmail.com> +# Thomas Gubler <thomasgubler@gmail.com> # -echo "HIL Rascal 110 starting.." - -if [ $DO_AUTOCONFIG == yes ] -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 +sh /etc/init.d/rc.fw_defaults - param set SYS_AUTOCONFIG 0 - param save -fi +echo "HIL Rascal 110 starting.." set HIL yes -set VEHICLE_TYPE fw set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil new file mode 100644 index 000000000..c753ded23 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil @@ -0,0 +1,47 @@ +#!nsh +# +# HIL Malolo 1 (Flightgear) +# +# Thomas Gubler <thomasgubler@gmail.com> +# + +sh /etc/init.d/rc.fw_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + param set FW_AIRSPD_MIN 12 + param set FW_AIRSPD_TRIM 25 + param set FW_AIRSPD_MAX 40 + param set FW_ATT_TC 0.3 + param set FW_L1_DAMPING 0.74 + param set FW_L1_PERIOD 15 + param set FW_PR_FF 0.8 + param set FW_PR_I 0.05 + param set FW_PR_IMAX 0.2 + param set FW_PR_P 0.1 + param set FW_P_ROLLFF 0 + param set FW_RR_FF 0.6 + param set FW_RR_I 0.02 + param set FW_RR_IMAX 0.2 + param set FW_RR_P 0.1 + param set FW_R_LIM 45 + param set FW_R_RMAX 0 + param set FW_T_CLMB_MAX 5 + param set FW_T_HRATE_P 0.02 + param set FW_T_PTCH_DAMP 0 + param set FW_T_RLL2THR 15 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_SRATE_P 0.01 + param set FW_T_TIME_CONST 3 + param set FW_T_VERT_ACC 7 + param set FW_YR_FF 0.0 + param set FW_YR_I 0 + param set FW_YR_IMAX 0.2 + param set FW_YR_P 0.0 +fi + +set HIL yes + +# Set the AERT mixer for HIL (even if the malolo is a flying wing) +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox new file mode 100644 index 000000000..b98ab4774 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -0,0 +1,15 @@ +#!nsh +# +# UNTESTED UNTESTED! +# +# Generic 10” Hexa coaxial geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER hexa_cox + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox new file mode 100644 index 000000000..655cb6226 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo coaxial geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER octo_cox + +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm b/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm deleted file mode 100644 index 5f3cec4e0..000000000 --- a/ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Octo coaxial geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_octo_cox - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar index 0e5bf60d6..465a22c53 100644 --- a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -2,38 +2,7 @@ # # MPX EasyStar Plane # -# Maintainers: ??? -# -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 -fi +sh /etc/init.d/rc.fw_defaults -set VEHICLE_TYPE fw set MIXER FMU_RET diff --git a/ROMFS/px4fmu_common/init.d/2101_hk_bixler b/ROMFS/px4fmu_common/init.d/2101_hk_bixler index 1ed923b19..dcc5db824 100644 --- a/ROMFS/px4fmu_common/init.d/2101_hk_bixler +++ b/ROMFS/px4fmu_common/init.d/2101_hk_bixler @@ -1,40 +1,5 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" +sh /etc/init.d/rc.fw_defaults -# -# Load default params for this platform -# -if [ $DO_AUTOCONFIG == yes ] -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -set VEHICLE_TYPE fw set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker index 1ed923b19..dcc5db824 100644 --- a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker +++ b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker @@ -1,40 +1,5 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" +sh /etc/init.d/rc.fw_defaults -# -# Load default params for this platform -# -if [ $DO_AUTOCONFIG == yes ] -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -set VEHICLE_TYPE fw set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/3030_io_camflyer b/ROMFS/px4fmu_common/init.d/3030_io_camflyer index cbcc6189b..83c470234 100644 --- a/ROMFS/px4fmu_common/init.d/3030_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/3030_io_camflyer @@ -1,40 +1,5 @@ #!nsh -echo "[init] PX4FMU v1, v2 with or without IO on Camflyer" +sh /etc/init.d/rc.fw_defaults -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set FW_AIRSPD_MIN 7 - param set FW_AIRSPD_TRIM 9 - param set FW_AIRSPD_MAX 14 - param set FW_L1_PERIOD 10 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 20 - param set FW_P_LIM_MAX 30 - param set FW_P_LIM_MIN -20 - param set FW_P_P 30 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 60 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 0.7 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5 - param set FW_T_SINK_MIN 2 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 2.0 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 -fi - -set VEHICLE_TYPE fw set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom index 4ebbe9c61..2e2434bb8 100644 --- a/ROMFS/px4fmu_common/init.d/3031_phantom +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -2,43 +2,7 @@ # # Phantom FPV Flying Wing # -# Maintainers: Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <sjwilks@gmail.com> # -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set FW_AIRSPD_MIN 11.4 - param set FW_AIRSPD_TRIM 14 - param set FW_AIRSPD_MAX 22 - param set FW_L1_PERIOD 15 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 45 - param set FW_P_LIM_MIN -45 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 15 - param set FW_R_P 80 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.8 - param set FW_THR_LND_MAX 0 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0.5 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 2.0 - param set FW_Y_ROLLFF 1.0 - param set RC_SCALE_ROLL 0.6 - param set RC_SCALE_PITCH 0.6 - param set TRIM_PITCH 0.1 -fi - -set VEHICLE_TYPE fw set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index 143310af9..bf5a87068 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -2,42 +2,38 @@ # # Skywalker X5 Flying Wing # -# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> +# Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> # +sh /etc/init.d/rc.fw_defaults + if [ $DO_AUTOCONFIG == yes ] then - # - # Default parameters for this platform - # - param set FW_AIRSPD_MIN 7 - param set FW_AIRSPD_TRIM 9 - param set FW_AIRSPD_MAX 14 - param set FW_L1_PERIOD 10 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 20 - param set FW_P_LIM_MAX 30 - param set FW_P_LIM_MIN -20 - param set FW_P_P 30 + param set FW_AIRSPD_MIN 15 + param set FW_AIRSPD_TRIM 20 + param set FW_AIRSPD_MAX 40 + param set FW_ATT_TC 0.3 + param set FW_L1_DAMPING 0.74 + param set FW_L1_PERIOD 15 + param set FW_PR_FF 0.3 + param set FW_PR_I 0 + param set FW_PR_IMAX 0.2 + param set FW_PR_P 0.03 + param set FW_P_LIM_MAX 45 + param set FW_P_LIM_MIN -45 param set FW_P_RMAX_NEG 0 param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 60 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 0.7 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5 - param set FW_T_SINK_MIN 2 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 2.0 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 + param set FW_P_ROLLFF 0 + param set FW_RR_FF 0.3 + param set FW_RR_I 0 + param set FW_RR_IMAX 0.2 + param set FW_RR_P 0.03 + param set FW_R_LIM 60 + param set FW_R_RMAX 0 + param set FW_T_HRATE_P 0.01 + param set FW_T_RLL2THR 15 + param set FW_T_SRATE_P 0.01 + param set FW_T_TIME_CONST 5 fi -set VEHICLE_TYPE fw set MIXER FMU_X5 diff --git a/ROMFS/px4fmu_common/init.d/3033_wingwing b/ROMFS/px4fmu_common/init.d/3033_wingwing index e53763278..2af3618d9 100644 --- a/ROMFS/px4fmu_common/init.d/3033_wingwing +++ b/ROMFS/px4fmu_common/init.d/3033_wingwing @@ -2,42 +2,9 @@ # # Wing Wing (aka Z-84) Flying Wing # -# Maintainers: Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <sjwilks@gmail.com> # -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set FW_AIRSPD_MIN 7 - param set FW_AIRSPD_TRIM 9 - param set FW_AIRSPD_MAX 14 - param set FW_L1_PERIOD 10 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 20 - param set FW_P_LIM_MAX 30 - param set FW_P_LIM_MIN -20 - param set FW_P_P 30 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 2 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 60 - param set FW_R_RMAX 60 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 0.7 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5 - param set FW_T_SINK_MIN 2 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 2.0 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 -fi +sh /etc/init.d/rc.fw_defaults -set VEHICLE_TYPE fw set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3034_fx79 b/ROMFS/px4fmu_common/init.d/3034_fx79 index 8d179d1fd..f4bd18269 100644 --- a/ROMFS/px4fmu_common/init.d/3034_fx79 +++ b/ROMFS/px4fmu_common/init.d/3034_fx79 @@ -2,42 +2,9 @@ # # FX-79 Buffalo Flying Wing # -# Maintainers: Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <sjwilks@gmail.com> # -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set FW_AIRSPD_MAX 20 - param set FW_AIRSPD_TRIM 12 - param set FW_AIRSPD_MIN 15 - param set FW_L1_PERIOD 12 - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 80 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.75 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_T_TIME_CONST 9 - param set FW_Y_ROLLFF 1.1 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 -fi +sh /etc/init.d/rc.fw_defaults -set VEHICLE_TYPE fw set MIXER FMU_FX79 diff --git a/ROMFS/px4fmu_common/init.d/4001_quad_x b/ROMFS/px4fmu_common/init.d/4001_quad_x new file mode 100644 index 000000000..345b0e3e4 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4001_quad_x @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Quad X geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_quad_x + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/4008_ardrone b/ROMFS/px4fmu_common/init.d/4008_ardrone deleted file mode 100644 index f6f09ac22..000000000 --- a/ROMFS/px4fmu_common/init.d/4008_ardrone +++ /dev/null @@ -1,57 +0,0 @@ -#!nsh - -echo "[init] 08_ardrone: PX4FMU on PX4IOAR carrier board" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_D 0 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0 - param set MC_ATT_I 0.3 - param set MC_ATT_P 5 - param set MC_YAWPOS_D 0.1 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 1 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.15 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 -param set BAT_V_SCALING 0.008381 - -# -# Start MAVLink -# -mavlink start -d /dev/ttyS0 -b 57600 -usleep 5000 - -# -# Configure PX4FMU for operation with PX4IOAR -# -fmu mode_gpio_serial - -# -# Fire up the AR.Drone interface. -# -ardrone_interface start -d /dev/ttyS1 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -# Exit, because /dev/ttyS0 is needed for MAVLink -exit diff --git a/ROMFS/px4fmu_common/init.d/4009_ardrone_flow b/ROMFS/px4fmu_common/init.d/4009_ardrone_flow deleted file mode 100644 index e2cb8833d..000000000 --- a/ROMFS/px4fmu_common/init.d/4009_ardrone_flow +++ /dev/null @@ -1,83 +0,0 @@ -#!nsh - -echo "[init] 09_ardrone_flow: PX4FMU on PX4IOAR carrier board with PX4FLOW" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_D 0 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0 - param set MC_ATT_I 0.3 - param set MC_ATT_P 5 - param set MC_YAWPOS_D 0.1 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 1 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.15 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 -param set BAT_V_SCALING 0.008381 - -# -# Start MAVLink and MAVLink Onboard (PX4FLOW Sensor) -# -mavlink start -d /dev/ttyS0 -b 57600 -mavlink_onboard start -d /dev/ttyS3 -b 115200 -usleep 5000 - -# -# Configure PX4FMU for operation with PX4IOAR -# -fmu mode_gpio_serial - -# -# Fire up the AR.Drone interface. -# -ardrone_interface start -d /dev/ttyS1 - -# -# Start the sensors. -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - -# -# Start the position estimator -# -flow_position_estimator start - -# -# Fire up the multi rotor attitude controller -# -mc_att_control_vector start - -# -# Fire up the flow position controller -# -flow_position_control start - -# -# Fire up the flow speed controller -# -flow_speed_control start - -# Exit, because /dev/ttyS0 is needed for MAVLink -exit diff --git a/ROMFS/px4fmu_common/init.d/4010_dji_f330 b/ROMFS/px4fmu_common/init.d/4010_dji_f330 index e0cf92d97..cd4480c3e 100644 --- a/ROMFS/px4fmu_common/init.d/4010_dji_f330 +++ b/ROMFS/px4fmu_common/init.d/4010_dji_f330 @@ -2,46 +2,26 @@ # # DJI Flame Wheel F330 Quadcopter # -# Maintainers: Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton.babushkin@me.com> # +sh /etc/init.d/4001_quad_x + if [ $DO_AUTOCONFIG == yes ] then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 param set MC_YAW_P 2.8 - param set MC_YAW_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 param set MC_YAWRATE_P 0.2 - param set MC_YAWRATE_I 0.05 + param set MC_YAWRATE_I 0.0 param set MC_YAWRATE_D 0.0 - - param set MPC_TILT_MAX 1.0 - param set MPC_THR_MAX 1.0 - param set MPC_THR_MIN 0.1 - param set MPC_XY_P 1.0 - param set MPC_XY_VEL_D 0.01 - param set MPC_XY_VEL_I 0.02 - param set MPC_XY_VEL_MAX 5 - param set MPC_XY_VEL_P 0.1 - param set MPC_Z_P 1.0 - param set MPC_Z_VEL_D 0.0 - param set MPC_Z_VEL_I 0.02 - param set MPC_Z_VEL_MAX 3 - param set MPC_Z_VEL_P 0.1 fi -set VEHICLE_TYPE mc -set MIXER FMU_quad_x - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 +set PWM_MIN 1175 set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/4011_dji_f450 b/ROMFS/px4fmu_common/init.d/4011_dji_f450 index ced69783d..ac2ecc70a 100644 --- a/ROMFS/px4fmu_common/init.d/4011_dji_f450 +++ b/ROMFS/px4fmu_common/init.d/4011_dji_f450 @@ -2,34 +2,27 @@ # # DJI Flame Wheel F450 Quadcopter # -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> +# Lorenz Meier <lm@inf.ethz.ch> # +sh /etc/init.d/4001_quad_x + if [ $DO_AUTOCONFIG == yes ] then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_YAW_P 2.0 - param set MC_YAW_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters + # TODO REVIEW + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 fi -set VEHICLE_TYPE mc -set MIXER FMU_quad_x - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 +set PWM_MIN 1175 set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/4012_hk_x550 b/ROMFS/px4fmu_common/init.d/4012_hk_x550 deleted file mode 100644 index e1423e008..000000000 --- a/ROMFS/px4fmu_common/init.d/4012_hk_x550 +++ /dev/null @@ -1,31 +0,0 @@ -#!nsh -# -# HobbyKing X550 Quadcopter -# -# Maintainers: Todd Stellanova <tstellanova@gmail.com> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 5.5 - param set MC_ATT_I 0 - param set MC_YAW_P 0.6 - param set MC_YAW_I 0 - param set MC_ATTRATE_P 0.14 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_D 0.006 - param set MC_YAWRATE_P 0.08 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_D 0 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_quad_x - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+ b/ROMFS/px4fmu_common/init.d/5001_quad_+ new file mode 100644 index 000000000..55b31067d --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/5001_quad_+ @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Quad + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_quad_+ + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm b/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm deleted file mode 100644 index 2e5f6ca4f..000000000 --- a/ROMFS/px4fmu_common/init.d/5001_quad_+_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Quad + geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_quad_+ - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x b/ROMFS/px4fmu_common/init.d/6001_hexa_x new file mode 100644 index 000000000..7714a508c --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/6001_hexa_x @@ -0,0 +1,13 @@ +#!nsh +# +# Generic 10” Hexa X geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_hexa_x + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm b/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm deleted file mode 100644 index ddec8f36e..000000000 --- a/ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Hexa X geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_hexa_x - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ new file mode 100644 index 000000000..60db8c069 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ @@ -0,0 +1,13 @@ +#!nsh +# +# Generic 10” Hexa + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_hexa_+ + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm b/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm deleted file mode 100644 index 106e0fb54..000000000 --- a/ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Hexa + geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_hexa_+ - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x b/ROMFS/px4fmu_common/init.d/8001_octo_x new file mode 100644 index 000000000..411aee114 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/8001_octo_x @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo X geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_octo_x + +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm b/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm deleted file mode 100644 index f0eea339b..000000000 --- a/ROMFS/px4fmu_common/init.d/8001_octo_x_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Octo X geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_octo_x - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+ b/ROMFS/px4fmu_common/init.d/9001_octo_+ new file mode 100644 index 000000000..81132fd3e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/9001_octo_+ @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_octo_+ + +set PWM_OUTPUTS 12345678
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm b/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm deleted file mode 100644 index 992a7aeba..000000000 --- a/ROMFS/px4fmu_common/init.d/9001_octo_+_pwm +++ /dev/null @@ -1,37 +0,0 @@ -#!nsh -# -# Generic 10” Octo + geometry -# -# Maintainers: Lorenz Meier <lm@inf.ethz.ch> -# - -if [ $DO_AUTOCONFIG == yes ] -then - # - # Default parameters for this platform - # - param set MC_ATT_P 7.0 - param set MC_ATT_I 0.0 - param set MC_ATT_D 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_D 0.004 - param set MC_YAWPOS_P 2.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWRATE_P 0.3 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_D 0.005 - - # TODO add default MPC parameters -fi - -set VEHICLE_TYPE mc -set MIXER FMU_octo_+ - -set PWM_OUTPUTS 1234 -set PWM_RATE 400 -# DJI ESC range -set PWM_DISARMED 900 -set PWM_MIN 1200 -set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart index 34da2dfef..3968af58e 100644 --- a/ROMFS/px4fmu_common/init.d/rc.autostart +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -23,7 +23,7 @@ if param compare SYS_AUTOSTART 1000 then - #sh /etc/init.d/1000_rc_fw_easystar.hil + sh /etc/init.d/1000_rc_fw_easystar.hil fi if param compare SYS_AUTOSTART 1001 @@ -31,11 +31,6 @@ then sh /etc/init.d/1001_rc_quad_x.hil fi -if param compare SYS_AUTOSTART 1002 -then - sh /etc/init.d/1002_rc_fw_state.hil -fi - if param compare SYS_AUTOSTART 1003 then sh /etc/init.d/1003_rc_quad_+.hil @@ -46,6 +41,11 @@ then sh /etc/init.d/1004_rc_fw_Rascal110.hil fi +if param compare SYS_AUTOSTART 1005 +then + sh /etc/init.d/1005_rc_fw_Malolo1.hil +fi + # # Standard plane # @@ -101,14 +101,9 @@ fi # Quad X # -if param compare SYS_AUTOSTART 4008 8 -then - #sh /etc/init.d/4008_ardrone -fi - -if param compare SYS_AUTOSTART 4009 9 +if param compare SYS_AUTOSTART 4001 then - #sh /etc/init.d/4009_ardrone_flow + sh /etc/init.d/4001_quad_x fi if param compare SYS_AUTOSTART 4010 10 @@ -121,18 +116,13 @@ then sh /etc/init.d/4011_dji_f450 fi -if param compare SYS_AUTOSTART 4012 12 -then - sh /etc/init.d/4012_hk_x550 -fi - # # Quad + # if param compare SYS_AUTOSTART 5001 then - sh /etc/init.d/5001_quad_+_pwm + sh /etc/init.d/5001_quad_+ fi # @@ -141,7 +131,7 @@ fi if param compare SYS_AUTOSTART 6001 then - sh /etc/init.d/6001_hexa_x_pwm + sh /etc/init.d/6001_hexa_x fi # @@ -150,7 +140,7 @@ fi if param compare SYS_AUTOSTART 7001 then - sh /etc/init.d/7001_hexa_+_pwm + sh /etc/init.d/7001_hexa_+ fi # @@ -159,7 +149,7 @@ fi if param compare SYS_AUTOSTART 8001 then - sh /etc/init.d/8001_octo_x_pwm + sh /etc/init.d/8001_octo_x fi # @@ -168,7 +158,7 @@ fi if param compare SYS_AUTOSTART 9001 then - sh /etc/init.d/9001_octo_+_pwm + sh /etc/init.d/9001_octo_+ fi # @@ -186,10 +176,19 @@ then fi # +# Hexa Coaxial +# + +if param compare SYS_AUTOSTART 11001 +then + sh /etc/init.d/11001_hexa_cox +fi + +# # Octo Coaxial # if param compare SYS_AUTOSTART 12001 then - sh /etc/init.d/12001_octo_cox_pwm + sh /etc/init.d/12001_octo_cox fi diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_apps b/ROMFS/px4fmu_common/init.d/rc.fw_apps index d354fb06f..72327c554 100644 --- a/ROMFS/px4fmu_common/init.d/rc.fw_apps +++ b/ROMFS/px4fmu_common/init.d/rc.fw_apps @@ -3,17 +3,6 @@ # Standard apps for fixed wing # -# -# Start the attitude and position estimator -# att_pos_estimator_ekf start - -# -# Start attitude controller -# fw_att_control start - -# -# Start the position controller -# fw_pos_control_l1 start diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_defaults b/ROMFS/px4fmu_common/init.d/rc.fw_defaults new file mode 100644 index 000000000..3e340699f --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.fw_defaults @@ -0,0 +1,13 @@ +#!nsh + +set VEHICLE_TYPE fw + +if [ $DO_AUTOCONFIG == yes ] +then +# +# Default parameters for FW +# + param set NAV_LAND_ALT 90 + param set NAV_RTL_ALT 100 + param set NAV_RTL_LAND_T -1 +fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io index c9d964f8e..6e8fdbc0f 100644 --- a/ROMFS/px4fmu_common/init.d/rc.io +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -4,7 +4,6 @@ # # Allow PX4IO to recover from midair restarts. -# this is very unlikely, but quite safe and robust. # px4io recovery diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index dcf5bbced..c5aef8273 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -8,7 +8,7 @@ then if hw_ver compare PX4FMU_V1 then echo "Start sdlog2 at 50Hz" - sdlog2 start -r 50 -a -b 16 -t + sdlog2 start -r 50 -a -b 8 -t else echo "Start sdlog2 at 200Hz" sdlog2 start -r 200 -a -b 16 -t diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_apps b/ROMFS/px4fmu_common/init.d/rc.mc_apps index 96fe32c8a..ed3939757 100644 --- a/ROMFS/px4fmu_common/init.d/rc.mc_apps +++ b/ROMFS/px4fmu_common/init.d/rc.mc_apps @@ -1,24 +1,11 @@ #!nsh # -# Standard apps for multirotors +# Standard apps for multirotors: +# att & pos estimator, att & pos control. # -# -# Start the attitude estimator -# attitude_estimator_ekf start - -# -# Start position estimator -# position_estimator_inav start -# -# Start attitude control -# mc_att_control start - -# -# Start position control -# mc_pos_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_defaults b/ROMFS/px4fmu_common/init.d/rc.mc_defaults new file mode 100644 index 000000000..4db62607a --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.mc_defaults @@ -0,0 +1,43 @@ +#!nsh + +set VEHICLE_TYPE mc + +if [ $DO_AUTOCONFIG == yes ] +then + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + param set MC_YAW_FF 0.5 + + param set MPC_THR_MAX 1.0 + param set MPC_THR_MIN 0.1 + param set MPC_XY_P 1.0 + param set MPC_XY_VEL_P 0.1 + param set MPC_XY_VEL_I 0.02 + param set MPC_XY_VEL_D 0.01 + param set MPC_XY_VEL_MAX 5 + param set MPC_XY_FF 0.5 + param set MPC_Z_P 1.0 + param set MPC_Z_VEL_P 0.1 + param set MPC_Z_VEL_I 0.02 + param set MPC_Z_VEL_D 0.0 + param set MPC_Z_VEL_MAX 3 + param set MPC_Z_FF 0.5 + param set MPC_TILT_MAX 1.0 + param set MPC_LAND_SPEED 1.0 + param set MPC_LAND_TILT 0.3 +fi + +set PWM_RATE 400 +set PWM_DISARMED 900 +set PWM_MIN 1075 +set PWM_MAX 2000 diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index badbf92c3..235be2431 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -3,10 +3,6 @@ # Standard startup script for PX4FMU onboard sensor drivers. # -# -# Start sensor drivers here. -# - ms5611 start adc start diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 88077c67f..76f021e33 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -3,8 +3,7 @@ # PX4FMU startup script. # -# Default to auto-start mode. An init script on the microSD card -# can change this to prevent automatic startup of the flight script. +# Default to auto-start mode. # set MODE autostart @@ -465,17 +464,25 @@ then if [ $MIXER == none ] then - # Set default mixer for multicopter if not defined - set MIXER quad_x + echo "Default mixer for multicopter not defined" fi if [ $MAV_TYPE == none ] then - # Use MAV_TYPE = 2 (quadcopter) if not defined - set MAV_TYPE 2 - # Use mixer to detect vehicle type - if [ $MIXER == FMU_hex_x -o $MIXER == FMU_hex_+ ] + if [ $MIXER == FMU_quad_x -o $MIXER == FMU_quad_+ ] + then + set MAV_TYPE 2 + fi + if [ $MIXER == FMU_quad_w ] + then + set MAV_TYPE 2 + fi + if [ $MIXER == FMU_hexa_x -o $MIXER == FMU_hexa_+ ] + then + set MAV_TYPE 13 + fi + if [ $MIXER == hexa_cox ] then set MAV_TYPE 13 fi @@ -488,8 +495,14 @@ then set MAV_TYPE 14 fi fi - - param set MAV_TYPE $MAV_TYPE + + # Still no MAV_TYPE found + if [ $MAV_TYPE == none ] + then + echo "Unknown MAV_TYPE" + else + param set MAV_TYPE $MAV_TYPE + fi # Load mixer and configure outputs sh /etc/init.d/rc.interface @@ -503,10 +516,8 @@ then # if [ $VEHICLE_TYPE == none ] then - echo "[init] Vehicle type: GENERIC" + echo "[init] Vehicle type: No autostart ID found" - # Load mixer and configure outputs - sh /etc/init.d/rc.interface fi # Start any custom addons diff --git a/ROMFS/px4fmu_common/mixers/FMU_Q.mix b/ROMFS/px4fmu_common/mixers/FMU_Q.mix index 17ff71151..b8ecbc879 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_Q.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_Q.mix @@ -25,13 +25,13 @@ for the elevons. M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -5000 -8000 0 -10000 10000 -S: 0 1 8000 8000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 6000 6000 0 -10000 10000 M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -8000 -5000 0 -10000 10000 -S: 0 1 -8000 -8000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 -6000 -6000 0 -10000 10000 Output 2 -------- diff --git a/ROMFS/px4fmu_common/mixers/FMU_X5.mix b/ROMFS/px4fmu_common/mixers/FMU_X5.mix index 610868354..80e3bac09 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_X5.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_X5.mix @@ -23,13 +23,13 @@ for the elevons. M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -3000 -5000 0 -10000 10000 -S: 0 1 -5000 -5000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 6000 6000 0 -10000 10000 M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -5000 -3000 0 -10000 10000 -S: 0 1 5000 5000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 -6000 -6000 0 -10000 10000 Output 2 -------- @@ -48,7 +48,7 @@ M: 1 O: 10000 10000 0 -10000 10000 S: 0 3 0 20000 -10000 -10000 10000 -Gimbal / payload mixer for last four channels +Gimbal / flaps / payload mixer for last four channels ----------------------------------------------------- M: 1 @@ -66,4 +66,3 @@ S: 0 6 10000 10000 0 -10000 10000 M: 1 O: 10000 10000 0 -10000 10000 S: 0 7 10000 10000 0 -10000 10000 - diff --git a/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix b/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix deleted file mode 100644 index f8f9f0e4d..000000000 --- a/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix +++ /dev/null @@ -1,18 +0,0 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a hexacopter in the + configuration. All controls -are mixed 100%. - -R: 6+ 10000 10000 10000 0 - -Gimbal / payload mixer for last two channels ------------------------------------------------------ - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 6 10000 10000 0 -10000 10000 - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 7 10000 10000 0 -10000 10000 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix b/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix deleted file mode 100644 index 26b40b9e9..000000000 --- a/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix +++ /dev/null @@ -1,18 +0,0 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a hexacopter in the X configuration. All controls -are mixed 100%. - -R: 6x 10000 10000 10000 0 - -Gimbal / payload mixer for last two channels ------------------------------------------------------ - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 6 10000 10000 0 -10000 10000 - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 7 10000 10000 0 -10000 10000 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix new file mode 100644 index 000000000..e608b459f --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix @@ -0,0 +1,3 @@ +# Hexa + + +R: 6+ 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix new file mode 100644 index 000000000..16e6e22f9 --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix @@ -0,0 +1,3 @@ +# Hexa X + +R: 6x 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix index 2cb70e814..397e22086 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a octocopter in the + configuration. All controls -are mixed 100%. +# Octo + R: 8+ 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix index 51cebb785..f7845450d 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a Coaxial Octocopter in the X configuration. All controls -are mixed 100%. +# Octo coaxial R: 8c 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix index edc71f013..c9a348aa4 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a octocopter in the X configuration. All controls -are mixed 100%. +# Octo X R: 8x 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/README b/ROMFS/px4fmu_common/mixers/README deleted file mode 100644 index 6649c53c2..000000000 --- a/ROMFS/px4fmu_common/mixers/README +++ /dev/null @@ -1,154 +0,0 @@ -PX4 mixer definitions -===================== - -Files in this directory implement example mixers that can be used as a basis -for customisation, or for general testing purposes. - -Mixer basics ------------- - -Mixers combine control values from various sources (control tasks, user inputs, -etc.) and produce output values suitable for controlling actuators; servos, -motors, switches and so on. - -An actuator derives its value from the combination of one or more control -values. Each of the control values is scaled according to the actuator's -configuration and then combined to produce the actuator value, which may then be -further scaled to suit the specific output type. - -Internally, all scaling is performed using floating point values. Inputs and -outputs are clamped to the range -1.0 to 1.0. - -control control control - | | | - v v v - scale scale scale - | | | - | v | - +-------> mix <------+ - | - scale - | - v - out - -Scaling -------- - -Basic scalers provide linear scaling of the input to the output. - -Each scaler allows the input value to be scaled independently for inputs -greater/less than zero. An offset can be applied to the output, and lower and -upper boundary constraints can be applied. Negative scaling factors cause the -output to be inverted (negative input produces positive output). - -Scaler pseudocode: - -if (input < 0) - output = (input * NEGATIVE_SCALE) + OFFSET -else - output = (input * POSITIVE_SCALE) + OFFSET - -if (output < LOWER_LIMIT) - output = LOWER_LIMIT -if (output > UPPER_LIMIT) - output = UPPER_LIMIT - -Syntax ------- - -Mixer definitions are text files; lines beginning with a single capital letter -followed by a colon are significant. All other lines are ignored, meaning that -explanatory text can be freely mixed with the definitions. - -Each file may define more than one mixer; the allocation of mixers to actuators -is specific to the device reading the mixer definition, and the number of -actuator outputs generated by a mixer is specific to the mixer. - -A mixer begins with a line of the form - - <tag>: <mixer arguments> - -The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a -multirotor mixer, etc. - -Null Mixer -.......... - -A null mixer consumes no controls and generates a single actuator output whose -value is always zero. Typically a null mixer is used as a placeholder in a -collection of mixers in order to achieve a specific pattern of actuator outputs. - -The null mixer definition has the form: - - Z: - -Simple Mixer -............ - -A simple mixer combines zero or more control inputs into a single actuator -output. Inputs are scaled, and the mixing function sums the result before -applying an output scaler. - -A simple mixer definition begins with: - - M: <control count> - O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> - -If <control count> is zero, the sum is effectively zero and the mixer will -output a fixed value that is <offset> constrained by <lower limit> and <upper -limit>. - -The second line defines the output scaler with scaler parameters as discussed -above. Whilst the calculations are performed as floating-point operations, the -values stored in the definition file are scaled by a factor of 10000; i.e. an -offset of -0.5 is encoded as -5000. - -The definition continues with <control count> entries describing the control -inputs and their scaling, in the form: - - S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> - -The <group> value identifies the control group from which the scaler will read, -and the <index> value an offset within that group. These values are specific to -the device reading the mixer definition. - -When used to mix vehicle controls, mixer group zero is the vehicle attitude -control group, and index values zero through three are normally roll, pitch, -yaw and thrust respectively. - -The remaining fields on the line configure the control scaler with parameters as -discussed above. Whilst the calculations are performed as floating-point -operations, the values stored in the definition file are scaled by a factor of -10000; i.e. an offset of -0.5 is encoded as -5000. - -Multirotor Mixer -................ - -The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust) -into a set of actuator outputs intended to drive motor speed controllers. - -The mixer definition is a single line of the form: - -R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband> - -The supported geometries include: - - 4x - quadrotor in X configuration - 4+ - quadrotor in + configuration - 6x - hexcopter in X configuration - 6+ - hexcopter in + configuration - 8x - octocopter in X configuration - 8+ - octocopter in + configuration - -Each of the roll, pitch and yaw scale values determine scaling of the roll, -pitch and yaw controls relative to the thrust control. Whilst the calculations -are performed as floating-point operations, the values stored in the definition -file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000. - -Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the -thrust input ranges from 0.0 to 1.0. Output for each actuator is in the -range -1.0 to 1.0. - -In the case where an actuator saturates, all actuator values are rescaled so that -the saturating actuator is limited to 1.0. diff --git a/ROMFS/px4fmu_common/mixers/hexa_cox.mix b/ROMFS/px4fmu_common/mixers/hexa_cox.mix new file mode 100644 index 000000000..497786feb --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/hexa_cox.mix @@ -0,0 +1,3 @@ +# Hexa coaxial + +R: 6c 10000 10000 10000 0 |