diff options
| author | Julian Oes <julian@oes.ch> | 2014-03-07 10:38:31 +0100 |
|---|---|---|
| committer | Julian Oes <julian@oes.ch> | 2014-03-07 10:38:31 +0100 |
| commit | 873fa4cb40a8ac5b57f3212bb233027f422b92a3 (patch) | |
| tree | 530f317645a7f3293e204f37eca0172ec2d45eb0 /ROMFS | |
| parent | 40f2d581bffacbf214edfcadac3a57756d605196 (diff) | |
| parent | cf9fa61a39f83e6fe4611ecf9336c1fcd1faaa78 (diff) | |
| download | px4-firmware-873fa4cb40a8ac5b57f3212bb233027f422b92a3.tar.gz px4-firmware-873fa4cb40a8ac5b57f3212bb233027f422b92a3.tar.bz2 px4-firmware-873fa4cb40a8ac5b57f3212bb233027f422b92a3.zip | |
Merge remote-tracking branch 'px4/master' into bottle_drop
Conflicts:
ROMFS/px4fmu_common/init.d/rcS
Diffstat (limited to 'ROMFS')
78 files changed, 1384 insertions, 2793 deletions
diff --git a/ROMFS/px4fmu_common/init.d/08_ardrone b/ROMFS/px4fmu_common/init.d/08_ardrone deleted file mode 100644 index f6f09ac22..000000000 --- a/ROMFS/px4fmu_common/init.d/08_ardrone +++ /dev/null @@ -1,57 +0,0 @@ -#!nsh - -echo "[init] 08_ardrone: PX4FMU on PX4IOAR carrier board" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_D 0 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0 - param set MC_ATT_I 0.3 - param set MC_ATT_P 5 - param set MC_YAWPOS_D 0.1 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 1 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.15 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 -param set BAT_V_SCALING 0.008381 - -# -# Start MAVLink -# -mavlink start -d /dev/ttyS0 -b 57600 -usleep 5000 - -# -# Configure PX4FMU for operation with PX4IOAR -# -fmu mode_gpio_serial - -# -# Fire up the AR.Drone interface. -# -ardrone_interface start -d /dev/ttyS1 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -# Exit, because /dev/ttyS0 is needed for MAVLink -exit diff --git a/ROMFS/px4fmu_common/init.d/09_ardrone_flow b/ROMFS/px4fmu_common/init.d/09_ardrone_flow deleted file mode 100644 index 9b739f245..000000000 --- a/ROMFS/px4fmu_common/init.d/09_ardrone_flow +++ /dev/null @@ -1,88 +0,0 @@ -#!nsh - -echo "[init] 09_ardrone_flow: PX4FMU on PX4IOAR carrier board with PX4FLOW" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_D 0 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0 - param set MC_ATT_I 0.3 - param set MC_ATT_P 5 - param set MC_YAWPOS_D 0.1 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 1 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.15 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 -param set BAT_V_SCALING 0.008381 - -# -# Start MAVLink and MAVLink Onboard (PX4FLOW Sensor) -# -mavlink start -d /dev/ttyS0 -b 57600 -mavlink_onboard start -d /dev/ttyS3 -b 115200 -usleep 5000 - -# -# Configure PX4FMU for operation with PX4IOAR -# -fmu mode_gpio_serial - -# -# Fire up the AR.Drone interface. -# -ardrone_interface start -d /dev/ttyS1 - -# -# Start the sensors. -# -sh /etc/init.d/rc.sensors - -# -# Start the commander. -# -commander start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - -# -# Start the position estimator -# -flow_position_estimator start - -# -# Fire up the multi rotor attitude controller -# -multirotor_att_control start - -# -# Fire up the flow position controller -# -flow_position_control start - -# -# Fire up the flow speed controller -# -flow_speed_control start - -# Exit, because /dev/ttyS0 is needed for MAVLink -exit diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil index 40a13b5d1..36194ad68 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -1,87 +1,14 @@ #!nsh # -# USB HIL start +# HILStar / X-Plane # - -echo "[HIL] HILStar starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ +# Lorenz Meier <lm@inf.ethz.ch> # -param set MAV_TYPE 1 -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors +sh /etc/init.d/rc.fw_defaults -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start +echo "HIL Rascal 110 starting.." -echo "[HIL] setup done, running" +set HIL yes +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery new file mode 100644 index 000000000..fe85f7d35 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery @@ -0,0 +1,29 @@ +#!nsh +# +# Team Blacksheep Discovery Quadcopter +# +# Anton Babushkin <anton.babushkin@me.com>, Simon Wilks <sjwilks@gmail.com>, Thomas Gubler <thomasgubler@gmail.com> +# + +sh /etc/init.d/rc.mc_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + # TODO review MC_YAWRATE_I + param set MC_ROLL_P 8.0 + param set MC_ROLLRATE_P 0.07 + param set MC_ROLLRATE_I 0.05 + param set MC_ROLLRATE_D 0.0017 + param set MC_PITCH_P 8.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.1 + param set MC_PITCHRATE_D 0.0025 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.28 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 +fi + +set MIXER FMU_quad_w + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/10016_3dr_iris b/ROMFS/px4fmu_common/init.d/10016_3dr_iris new file mode 100644 index 000000000..d691a6f2e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/10016_3dr_iris @@ -0,0 +1,32 @@ +#!nsh +# +# 3DR Iris Quadcopter +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + # TODO tune roll/pitch separately + param set MC_ROLL_P 9.0 + param set MC_ROLLRATE_P 0.13 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.004 + param set MC_PITCH_P 9.0 + param set MC_PITCHRATE_P 0.13 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.004 + param set MC_YAW_P 0.5 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + + param set BAT_V_SCALING 0.00989 + param set BAT_C_SCALING 0.0124 +fi + +set MIXER FMU_quad_w + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil deleted file mode 100644 index 9b664d63e..000000000 --- a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil +++ /dev/null @@ -1,105 +0,0 @@ -#!nsh -# -# USB HIL start -# - -echo "[HIL] HILS quadrotor starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.0 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.05 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 3.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.1 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.05 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.5 - param set MPC_THR_MIN 0.1 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 2 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start - -echo "[HIL] setup done, running" - diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil new file mode 100644 index 000000000..7a7a9542c --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil @@ -0,0 +1,12 @@ +#!nsh +# +# HIL Quadcopter X +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_quad_x + +set HIL yes diff --git a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil b/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil deleted file mode 100644 index 7b9f41bf6..000000000 --- a/ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil +++ /dev/null @@ -1,79 +0,0 @@ -#!nsh -# -# USB HIL start -# - -echo "[HIL] HILStar starting in state-HIL mode.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -echo "[HIL] setup done, running" - diff --git a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil index 0cc07ad34..c47500c7a 100644 --- a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil +++ b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil @@ -1,105 +1,12 @@ #!nsh # -# USB HIL start +# HIL Quadcopter + # - -echo "[HIL] HILS quadrotor + starting.." - +# Anton Babushkin <anton.babushkin@me.com> # -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.0 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.05 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 3.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.1 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.05 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.5 - param set MPC_THR_MIN 0.1 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 2 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start +sh /etc/init.d/rc.mc_defaults -echo "[HIL] setup done, running" +set MIXER FMU_quad_+ +set HIL yes
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil index 344d78422..4e3e18326 100644 --- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil +++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil @@ -1,98 +1,14 @@ #!nsh # -# USB HIL start +# HIL Rascal 110 (Flightgear) # - -echo "[HIL] HILStar starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) +# Thomas Gubler <thomasgubler@gmail.com> # -set MODE autostart -mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix -else - echo "Using /etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -fi +sh /etc/init.d/rc.fw_defaults -fw_pos_control_l1 start -fw_att_control start +echo "HIL Rascal 110 starting.." -echo "[HIL] setup done, running" +set HIL yes +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil new file mode 100644 index 000000000..c753ded23 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil @@ -0,0 +1,47 @@ +#!nsh +# +# HIL Malolo 1 (Flightgear) +# +# Thomas Gubler <thomasgubler@gmail.com> +# + +sh /etc/init.d/rc.fw_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + param set FW_AIRSPD_MIN 12 + param set FW_AIRSPD_TRIM 25 + param set FW_AIRSPD_MAX 40 + param set FW_ATT_TC 0.3 + param set FW_L1_DAMPING 0.74 + param set FW_L1_PERIOD 15 + param set FW_PR_FF 0.8 + param set FW_PR_I 0.05 + param set FW_PR_IMAX 0.2 + param set FW_PR_P 0.1 + param set FW_P_ROLLFF 0 + param set FW_RR_FF 0.6 + param set FW_RR_I 0.02 + param set FW_RR_IMAX 0.2 + param set FW_RR_P 0.1 + param set FW_R_LIM 45 + param set FW_R_RMAX 0 + param set FW_T_CLMB_MAX 5 + param set FW_T_HRATE_P 0.02 + param set FW_T_PTCH_DAMP 0 + param set FW_T_RLL2THR 15 + param set FW_T_SINK_MAX 5 + param set FW_T_SINK_MIN 2 + param set FW_T_SRATE_P 0.01 + param set FW_T_TIME_CONST 3 + param set FW_T_VERT_ACC 7 + param set FW_YR_FF 0.0 + param set FW_YR_I 0 + param set FW_YR_IMAX 0.2 + param set FW_YR_P 0.0 +fi + +set HIL yes + +# Set the AERT mixer for HIL (even if the malolo is a flying wing) +set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/100_mpx_easystar b/ROMFS/px4fmu_common/init.d/100_mpx_easystar deleted file mode 100644 index abe378b22..000000000 --- a/ROMFS/px4fmu_common/init.d/100_mpx_easystar +++ /dev/null @@ -1,87 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on EasyStar" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_RET.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_RET.mix -else - echo "Using /etc/mixers/FMU_RET.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_RET.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/101_hk_bixler b/ROMFS/px4fmu_common/init.d/101_hk_bixler deleted file mode 100644 index c616da988..000000000 --- a/ROMFS/px4fmu_common/init.d/101_hk_bixler +++ /dev/null @@ -1,87 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/102_3dr_skywalker deleted file mode 100644 index e5d21c321..000000000 --- a/ROMFS/px4fmu_common/init.d/102_3dr_skywalker +++ /dev/null @@ -1,89 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -pwm disarmed -c 3 -p 1056 - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/10_dji_f330 b/ROMFS/px4fmu_common/init.d/10_dji_f330 deleted file mode 100644 index 467b56bbf..000000000 --- a/ROMFS/px4fmu_common/init.d/10_dji_f330 +++ /dev/null @@ -1,97 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on DJI F330" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals (for DJI ESCs) -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1200 -pwm max -c 1234 -p 1800 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox new file mode 100644 index 000000000..b98ab4774 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -0,0 +1,15 @@ +#!nsh +# +# UNTESTED UNTESTED! +# +# Generic 10” Hexa coaxial geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER hexa_cox + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/11_dji_f450 b/ROMFS/px4fmu_common/init.d/11_dji_f450 deleted file mode 100644 index 818f9375e..000000000 --- a/ROMFS/px4fmu_common/init.d/11_dji_f450 +++ /dev/null @@ -1,83 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on DJI F450" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - commander start - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals (for DJI ESCs) -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1200 -pwm max -c 1234 -p 1800 - -# -# Start common multirotor apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/12-13_hex b/ROMFS/px4fmu_common/init.d/12-13_hex deleted file mode 100644 index a7578bcaf..000000000 --- a/ROMFS/px4fmu_common/init.d/12-13_hex +++ /dev/null @@ -1,98 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Hex" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.12 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 7.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE list: https://pixhawk.ethz.ch/mavlink/ -# 13 = hexarotor -# -param set MAV_TYPE 13 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_hex_x.mix - -# -# Set PWM output frequency to 400 Hz -# -pwm rate -a -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 123456 -p 900 -pwm min -c 123456 -p 1100 -pwm max -c 123456 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox new file mode 100644 index 000000000..655cb6226 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo coaxial geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER octo_cox + +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/15_tbs_discovery b/ROMFS/px4fmu_common/init.d/15_tbs_discovery deleted file mode 100644 index c79e9d283..000000000 --- a/ROMFS/px4fmu_common/init.d/15_tbs_discovery +++ /dev/null @@ -1,81 +0,0 @@ -#!nsh - -echo "[init] Team Blacksheep Discovery Quad" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.006 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.17 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 5.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 0.5 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.2 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load the mixer for a quad with wide arms -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1100 -pwm max -c 1234 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/16_3dr_iris b/ROMFS/px4fmu_common/init.d/16_3dr_iris deleted file mode 100644 index f6b071cf1..000000000 --- a/ROMFS/px4fmu_common/init.d/16_3dr_iris +++ /dev/null @@ -1,80 +0,0 @@ -#!nsh - -echo "[init] 3DR Iris Quad" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.004 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.13 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 9.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.15 - param set MC_YAWPOS_P 0.5 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.2 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.0098 - set EXIT_ON_END yes -fi - -# -# Load the mixer for a quad with wide arms -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1050 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar new file mode 100644 index 000000000..465a22c53 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -0,0 +1,8 @@ +#!nsh +# +# MPX EasyStar Plane +# + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_RET diff --git a/ROMFS/px4fmu_common/init.d/2101_hk_bixler b/ROMFS/px4fmu_common/init.d/2101_hk_bixler new file mode 100644 index 000000000..dcc5db824 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/2101_hk_bixler @@ -0,0 +1,5 @@ +#!nsh + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker new file mode 100644 index 000000000..dcc5db824 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker @@ -0,0 +1,5 @@ +#!nsh + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_AERT
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/3030_io_camflyer b/ROMFS/px4fmu_common/init.d/3030_io_camflyer new file mode 100644 index 000000000..83c470234 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3030_io_camflyer @@ -0,0 +1,5 @@ +#!nsh + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom new file mode 100644 index 000000000..a3004d1e1 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -0,0 +1,10 @@ +#!nsh +# +# Phantom FPV Flying Wing +# +# Simon Wilks <sjwilks@gmail.com> +# + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 new file mode 100644 index 000000000..bf5a87068 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -0,0 +1,39 @@ +#!nsh +# +# Skywalker X5 Flying Wing +# +# Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> +# + +sh /etc/init.d/rc.fw_defaults + +if [ $DO_AUTOCONFIG == yes ] +then + param set FW_AIRSPD_MIN 15 + param set FW_AIRSPD_TRIM 20 + param set FW_AIRSPD_MAX 40 + param set FW_ATT_TC 0.3 + param set FW_L1_DAMPING 0.74 + param set FW_L1_PERIOD 15 + param set FW_PR_FF 0.3 + param set FW_PR_I 0 + param set FW_PR_IMAX 0.2 + param set FW_PR_P 0.03 + param set FW_P_LIM_MAX 45 + param set FW_P_LIM_MIN -45 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 0 + param set FW_RR_FF 0.3 + param set FW_RR_I 0 + param set FW_RR_IMAX 0.2 + param set FW_RR_P 0.03 + param set FW_R_LIM 60 + param set FW_R_RMAX 0 + param set FW_T_HRATE_P 0.01 + param set FW_T_RLL2THR 15 + param set FW_T_SRATE_P 0.01 + param set FW_T_TIME_CONST 5 +fi + +set MIXER FMU_X5 diff --git a/ROMFS/px4fmu_common/init.d/3033_wingwing b/ROMFS/px4fmu_common/init.d/3033_wingwing new file mode 100644 index 000000000..2af3618d9 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3033_wingwing @@ -0,0 +1,10 @@ +#!nsh +# +# Wing Wing (aka Z-84) Flying Wing +# +# Simon Wilks <sjwilks@gmail.com> +# + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_Q diff --git a/ROMFS/px4fmu_common/init.d/3034_fx79 b/ROMFS/px4fmu_common/init.d/3034_fx79 new file mode 100644 index 000000000..f4bd18269 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/3034_fx79 @@ -0,0 +1,10 @@ +#!nsh +# +# FX-79 Buffalo Flying Wing +# +# Simon Wilks <sjwilks@gmail.com> +# + +sh /etc/init.d/rc.fw_defaults + +set MIXER FMU_FX79 diff --git a/ROMFS/px4fmu_common/init.d/30_io_camflyer b/ROMFS/px4fmu_common/init.d/30_io_camflyer deleted file mode 100644 index 8a8bc1590..000000000 --- a/ROMFS/px4fmu_common/init.d/30_io_camflyer +++ /dev/null @@ -1,65 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Camflyer" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/31_io_phantom b/ROMFS/px4fmu_common/init.d/31_io_phantom deleted file mode 100644 index 63cd7f9b2..000000000 --- a/ROMFS/px4fmu_common/init.d/31_io_phantom +++ /dev/null @@ -1,87 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Phantom FPV" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 17 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/32_skywalker_x5 b/ROMFS/px4fmu_common/init.d/32_skywalker_x5 deleted file mode 100644 index 1e752f13a..000000000 --- a/ROMFS/px4fmu_common/init.d/32_skywalker_x5 +++ /dev/null @@ -1,65 +0,0 @@ -#!nsh - -echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing -# -param set MAV_TYPE 1 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - - sh /etc/init.d/rc.io - # Limit to 100 Hz updates and (implicit) 50 Hz PWM - px4io limit 100 -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer and start controllers (depends on px4io) -# -if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ] -then - echo "Using /fs/microsd/etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix -else - echo "Using /etc/mixers/FMU_Q.mix" - mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix -fi - -# -# Start common fixedwing apps -# -sh /etc/init.d/rc.fixedwing - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/4001_quad_x b/ROMFS/px4fmu_common/init.d/4001_quad_x new file mode 100644 index 000000000..345b0e3e4 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4001_quad_x @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Quad X geometry +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_quad_x + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/4008_ardrone b/ROMFS/px4fmu_common/init.d/4008_ardrone new file mode 100644 index 000000000..0f98f7b6c --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4008_ardrone @@ -0,0 +1,35 @@ +#!nsh +# +# ARDrone +# + +echo "[init] 4008_ardrone: PX4FMU on PX4IOAR carrier board" + +# Just use the default multicopter settings. +sh /etc/init.d/rc.mc_defaults + +# +# Load default params for this platform +# +if [ $DO_AUTOCONFIG == yes ] +then + # Set all params here, then disable autoconfig + param set MC_ROLL_P 5.0 + param set MC_ROLLRATE_P 0.13 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.0 + param set MC_PITCH_P 5.0 + param set MC_PITCHRATE_P 0.13 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.0 + param set MC_YAW_P 1.0 + param set MC_YAW_D 0.1 + param set MC_YAWRATE_P 0.15 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + param set MC_YAW_FF 0.15 +fi + +set OUTPUT_MODE ardrone +set USE_IO no +set MIXER skip diff --git a/ROMFS/px4fmu_common/init.d/4010_dji_f330 b/ROMFS/px4fmu_common/init.d/4010_dji_f330 new file mode 100644 index 000000000..cd4480c3e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4010_dji_f330 @@ -0,0 +1,27 @@ +#!nsh +# +# DJI Flame Wheel F330 Quadcopter +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/4001_quad_x + +if [ $DO_AUTOCONFIG == yes ] +then + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 +fi + +set PWM_MIN 1175 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/4011_dji_f450 b/ROMFS/px4fmu_common/init.d/4011_dji_f450 new file mode 100644 index 000000000..ac2ecc70a --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/4011_dji_f450 @@ -0,0 +1,28 @@ +#!nsh +# +# DJI Flame Wheel F450 Quadcopter +# +# Lorenz Meier <lm@inf.ethz.ch> +# + +sh /etc/init.d/4001_quad_x + +if [ $DO_AUTOCONFIG == yes ] +then + # TODO REVIEW + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 +fi + +set PWM_MIN 1175 +set PWM_MAX 1900 diff --git a/ROMFS/px4fmu_common/init.d/40_io_segway b/ROMFS/px4fmu_common/init.d/40_io_segway deleted file mode 100644 index fb9dec043..000000000 --- a/ROMFS/px4fmu_common/init.d/40_io_segway +++ /dev/null @@ -1,56 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - # TODO - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 10 = ground rover -# -param set MAV_TYPE 10 - -# -# Start MAVLink (depends on orb) -# -mavlink start -d /dev/ttyS1 -b 57600 -usleep 5000 - -# -# Start and configure PX4IO interface -# -sh /etc/init.d/rc.io - -# -# Start the commander (depends on orb, mavlink) -# -commander start - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator (depends on orb) -# -attitude_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -roboclaw start /dev/ttyS2 128 1200 -segway start diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+ b/ROMFS/px4fmu_common/init.d/5001_quad_+ new file mode 100644 index 000000000..55b31067d --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/5001_quad_+ @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Quad + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_quad_+ + +set PWM_OUTPUTS 1234 diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x b/ROMFS/px4fmu_common/init.d/6001_hexa_x new file mode 100644 index 000000000..7714a508c --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/6001_hexa_x @@ -0,0 +1,13 @@ +#!nsh +# +# Generic 10” Hexa X geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_hexa_x + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 b/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 deleted file mode 100644 index 1ee84b9b0..000000000 --- a/ROMFS/px4fmu_common/init.d/666_fmu_q_x550 +++ /dev/null @@ -1,83 +0,0 @@ -#!nsh - -echo "[init] 666_fmu_q_x550: PX4FMU Quad X550 with or without IO" - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set MC_ATTRATE_P 0.14 - param set MC_ATTRATE_I 0 - param set MC_ATTRATE_D 0.006 - param set MC_ATT_P 5.5 - param set MC_ATT_I 0 - param set MC_ATT_D 0 - param set MC_YAWPOS_D 0 - param set MC_YAWPOS_I 0 - param set MC_YAWPOS_P 0.6 - param set MC_YAWRATE_D 0 - param set MC_YAWRATE_I 0 - param set MC_YAWRATE_P 0.08 - param set RC_SCALE_PITCH 1 - param set RC_SCALE_ROLL 1 - param set RC_SCALE_YAW 3 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Set PWM output frequency -# -pwm rate -c 1234 -r 400 - -# -# Set disarmed, min and max PWM signals -# -pwm disarmed -c 1234 -p 900 -pwm min -c 1234 -p 1100 -pwm max -c 1234 -p 1900 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ new file mode 100644 index 000000000..60db8c069 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ @@ -0,0 +1,13 @@ +#!nsh +# +# Generic 10” Hexa + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_hexa_+ + +# We only can run one channel group with one rate, so set all 8 channels +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x b/ROMFS/px4fmu_common/init.d/8001_octo_x new file mode 100644 index 000000000..411aee114 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/8001_octo_x @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo X geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_octo_x + +set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+ b/ROMFS/px4fmu_common/init.d/9001_octo_+ new file mode 100644 index 000000000..81132fd3e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/9001_octo_+ @@ -0,0 +1,12 @@ +#!nsh +# +# Generic 10” Octo + geometry +# +# Anton Babushkin <anton.babushkin@me.com> +# + +sh /etc/init.d/rc.mc_defaults + +set MIXER FMU_octo_+ + +set PWM_OUTPUTS 12345678
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/900_bottle_drop_test b/ROMFS/px4fmu_common/init.d/900_bottle_drop_test deleted file mode 100644 index c0f50fec0..000000000 --- a/ROMFS/px4fmu_common/init.d/900_bottle_drop_test +++ /dev/null @@ -1,75 +0,0 @@ -#!nsh - -echo "[init] bottle drop test - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start and configure PX4IO and FMU interface -# -# Start MAVLink (depends on orb) -mavlink start -usleep 5000 - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start logging (depends on sensors) -# -#sh /etc/init.d/rc.logging -sdlog2 start -r 200 -e -b 16 - - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - -# -# Start position estimator -# -position_estimator_inav start - -sh /etc/init.d/rc.io - -fmu mode_pwm - -mixer load /dev/px4fmu /etc/mixers/FMU_pass.mix - -pwm min -d /dev/px4fmu -c 123 -p 900 -pwm max -d /dev/px4fmu -c 123 -p 2100 - -pwm arm -d /dev/px4fmu - -bottle_drop start - - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/901_bottle_drop_test.hil b/ROMFS/px4fmu_common/init.d/901_bottle_drop_test.hil deleted file mode 100644 index 472351e9e..000000000 --- a/ROMFS/px4fmu_common/init.d/901_bottle_drop_test.hil +++ /dev/null @@ -1,91 +0,0 @@ -#!nsh -# -# USB HIL start -# - -echo "[HIL] HILStar starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - - param set FW_P_D 0 - param set FW_P_I 0 - param set FW_P_IMAX 15 - param set FW_P_LIM_MAX 50 - param set FW_P_LIM_MIN -50 - param set FW_P_P 60 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 1.1 - param set FW_R_D 0 - param set FW_R_I 5 - param set FW_R_IMAX 20 - param set FW_R_P 100 - param set FW_R_RMAX 100 - param set FW_THR_CRUISE 0.65 - param set FW_THR_MAX 1 - param set FW_THR_MIN 0 - param set FW_T_SINK_MAX 5.0 - param set FW_T_SINK_MIN 4.0 - param set FW_Y_ROLLFF 1.1 - param set FW_L1_PERIOD 16 - param set RC_SCALE_ROLL 1.0 - param set RC_SCALE_PITCH 1.0 - - param set SYS_AUTOCONFIG 0 - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 1 - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix -fw_pos_control_l1 start -fw_att_control start - -# -# Start IO -# -px4io start - - -mixer load /dev/px4io /etc/mixers/FMU_pass.mix - -pwm min -d /dev/px4io -c 123 -p 900 -pwm max -d /dev/px4io -c 123 -p 2100 - -pwm arm -d /dev/px4io - -bottle_drop start - -echo "[HIL] setup done, running" - diff --git a/ROMFS/px4fmu_common/init.d/cmp_test b/ROMFS/px4fmu_common/init.d/cmp_test deleted file mode 100644 index f86f4f85b..000000000 --- a/ROMFS/px4fmu_common/init.d/cmp_test +++ /dev/null @@ -1,9 +0,0 @@ -#!nsh - -cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded -then - echo "CMP returned true" -else - echo "CMP returned false" -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart new file mode 100644 index 000000000..7aaf7133e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -0,0 +1,203 @@ +# +# Check if auto-setup from one of the standard scripts is wanted +# SYS_AUTOSTART = 0 means no autostart (default) +# +# AUTOSTART PARTITION: +# 0 .. 999 Reserved (historical) +# 1000 .. 1999 Simulation setups +# 2000 .. 2999 Standard planes +# 3000 .. 3999 Flying wing +# 4000 .. 4999 Quad X +# 5000 .. 5999 Quad + +# 6000 .. 6999 Hexa X +# 7000 .. 7999 Hexa + +# 8000 .. 8999 Octo X +# 9000 .. 9999 Octo + +# 10000 .. 10999 Wide arm / H frame +# 11000 .. 11999 Hexa Cox +# 12000 .. 12999 Octo Cox + +# +# Simulation setups +# + +if param compare SYS_AUTOSTART 1000 +then + sh /etc/init.d/1000_rc_fw_easystar.hil +fi + +if param compare SYS_AUTOSTART 1001 +then + sh /etc/init.d/1001_rc_quad_x.hil +fi + +if param compare SYS_AUTOSTART 1003 +then + sh /etc/init.d/1003_rc_quad_+.hil +fi + +if param compare SYS_AUTOSTART 1004 +then + sh /etc/init.d/1004_rc_fw_Rascal110.hil +fi + +if param compare SYS_AUTOSTART 1005 +then + sh /etc/init.d/1005_rc_fw_Malolo1.hil +fi + +# +# Standard plane +# + +if param compare SYS_AUTOSTART 2100 100 +then + sh /etc/init.d/2100_mpx_easystar + set MODE custom +fi + +if param compare SYS_AUTOSTART 2101 101 +then + sh /etc/init.d/2101_hk_bixler + set MODE custom +fi + +if param compare SYS_AUTOSTART 2102 102 +then + sh /etc/init.d/2102_3dr_skywalker + set MODE custom +fi + +# +# Flying wing +# + +if param compare SYS_AUTOSTART 3030 30 +then + sh /etc/init.d/3030_io_camflyer +fi + +if param compare SYS_AUTOSTART 3031 31 +then + sh /etc/init.d/3031_phantom +fi + +if param compare SYS_AUTOSTART 3032 32 +then + sh /etc/init.d/3032_skywalker_x5 +fi + +if param compare SYS_AUTOSTART 3033 33 +then + sh /etc/init.d/3033_wingwing +fi + +if param compare SYS_AUTOSTART 3034 34 +then + sh /etc/init.d/3034_fx79 +fi + +# +# Quad X +# + +if param compare SYS_AUTOSTART 4001 +then + sh /etc/init.d/4001_quad_x +fi + +# +# ARDrone +# + +if param compare SYS_AUTOSTART 4008 8 +then + sh /etc/init.d/4008_ardrone +fi + +if param compare SYS_AUTOSTART 4010 10 +then + sh /etc/init.d/4010_dji_f330 +fi + +if param compare SYS_AUTOSTART 4011 11 +then + sh /etc/init.d/4011_dji_f450 +fi + +# +# Quad + +# + +if param compare SYS_AUTOSTART 5001 +then + sh /etc/init.d/5001_quad_+ +fi + +# +# Hexa X +# + +if param compare SYS_AUTOSTART 6001 +then + sh /etc/init.d/6001_hexa_x +fi + +# +# Hexa + +# + +if param compare SYS_AUTOSTART 7001 +then + sh /etc/init.d/7001_hexa_+ +fi + +# +# Octo X +# + +if param compare SYS_AUTOSTART 8001 +then + sh /etc/init.d/8001_octo_x +fi + +# +# Octo + +# + +if param compare SYS_AUTOSTART 9001 +then + sh /etc/init.d/9001_octo_+ +fi + +# +# Wide arm / H frame +# + +if param compare SYS_AUTOSTART 10015 15 +then + sh /etc/init.d/10015_tbs_discovery +fi + +if param compare SYS_AUTOSTART 10016 16 +then + sh /etc/init.d/10016_3dr_iris +fi + +# +# Hexa Coaxial +# + +if param compare SYS_AUTOSTART 11001 +then + sh /etc/init.d/11001_hexa_cox +fi + +# +# Octo Coaxial +# + +if param compare SYS_AUTOSTART 12001 +then + sh /etc/init.d/12001_octo_cox +fi diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl b/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl deleted file mode 100644 index 40b2ee68b..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl +++ /dev/null @@ -1,113 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.002 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.09 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 6.8 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -# -# Start the Mikrokopter ESC driver -# -if [ $MKBLCTRL_MODE == yes ] -then - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing" - mkblctrl -mkmode x - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing" - mkblctrl -mkmode + - fi -else - if [ $MKBLCTRL_FRAME == x ] - then - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame" - else - echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame" - fi - mkblctrl -fi - -usleep 10000 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start - usleep 5000 - - sh /etc/init.d/rc.io -else - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS0 - usleep 5000 - fmu mode_pwm - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -# -# Load mixer -# -if [ $MKBLCTRL_FRAME == x ] -then - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix -else - mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix -fi - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_io_esc b/ROMFS/px4fmu_common/init.d/rc.custom_io_esc deleted file mode 100644 index 045e41e52..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.custom_io_esc +++ /dev/null @@ -1,120 +0,0 @@ -#!nsh - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.002 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.09 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 6.8 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.0 - param set MC_YAWRATE_D 0.005 - param set MC_YAWRATE_I 0.2 - param set MC_YAWRATE_P 0.3 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.7 - param set MPC_THR_MIN 0.3 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -echo "RC script for PX4FMU + PX4IO + PPM-ESCs running" - -# -# Force some key parameters to sane values -# MAV_TYPE 2 = quadrotor -# -param set MAV_TYPE 2 - -set EXIT_ON_END no - -usleep 10000 - -# -# Start and configure PX4IO or FMU interface -# -if px4io detect -then - # Start MAVLink (depends on orb) - mavlink start -d /dev/ttyS1 -b 57600 - usleep 5000 - - sh /etc/init.d/rc.io -else - fmu mode_pwm - # Start MAVLink (on UART1 / ttyS0) - mavlink start -d /dev/ttyS1 -b 57600 - usleep 5000 - param set BAT_V_SCALING 0.004593 - set EXIT_ON_END yes -fi - -if [ $ESC_MAKER = afro ] -then - # Set PWM values for Afro ESCs - pwm disarmed -c 1234 -p 1050 - pwm min -c 1234 -p 1080 - pwm max -c 1234 -p 1860 -else - # Set PWM values for typical ESCs - pwm disarmed -c 1234 -p 900 - pwm min -c 1234 -p 980 - pwm max -c 1234 -p 1800 -fi - -# -# Load mixer -# -if [ $FRAME_GEOMETRY == x ] -then - echo "Frame geometry X" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix -else - if [ $FRAME_GEOMETRY == w ] - then - echo "Frame geometry W" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_w.mix - else - echo "Frame geometry +" - mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix - fi -fi - -# -# Set PWM output frequency -# -pwm rate -r 400 -c 1234 - -# -# Start common for all multirotors apps -# -sh /etc/init.d/rc.multirotor - -if [ $EXIT_ON_END == yes ] -then - exit -fi - -echo "Script end" diff --git a/ROMFS/px4fmu_common/init.d/rc.fixedwing b/ROMFS/px4fmu_common/init.d/rc.fixedwing deleted file mode 100644 index f02851006..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.fixedwing +++ /dev/null @@ -1,34 +0,0 @@ -#!nsh -# -# Standard everything needed for fixedwing except mixer, actuator output and mavlink -# - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start logging (depends on sensors) -# -sh /etc/init.d/rc.logging - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude and position estimator -# -att_pos_estimator_ekf start - -# -# Start attitude controller -# -fw_att_control start - -# -# Start the position controller -# -fw_pos_control_l1 start diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_apps b/ROMFS/px4fmu_common/init.d/rc.fw_apps new file mode 100644 index 000000000..72327c554 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.fw_apps @@ -0,0 +1,8 @@ +#!nsh +# +# Standard apps for fixed wing +# + +att_pos_estimator_ekf start +fw_att_control start +fw_pos_control_l1 start diff --git a/ROMFS/px4fmu_common/init.d/rc.fw_defaults b/ROMFS/px4fmu_common/init.d/rc.fw_defaults new file mode 100644 index 000000000..3a50fcf56 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.fw_defaults @@ -0,0 +1,14 @@ +#!nsh + +set VEHICLE_TYPE fw + +if [ $DO_AUTOCONFIG == yes ] +then +# +# Default parameters for FW +# + param set NAV_LAND_ALT 90 + param set NAV_RTL_ALT 100 + param set NAV_RTL_LAND_T -1 + param set NAV_ACCEPT_RAD 50 +fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_common/init.d/rc.interface b/ROMFS/px4fmu_common/init.d/rc.interface new file mode 100644 index 000000000..7f793b219 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.interface @@ -0,0 +1,75 @@ +#!nsh +# +# Script to configure control interface +# + +if [ $MIXER != none -a $MIXER != skip ] +then + # + # Load mixer + # + set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix + + #Use the mixer file from the SD-card if it exists + if [ -f $MIXERSD ] + then + set MIXER_FILE $MIXERSD + else + set MIXER_FILE /etc/mixers/$MIXER.mix + fi + + if [ $OUTPUT_MODE == mkblctrl ] + then + set OUTPUT_DEV /dev/mkblctrl + else + set OUTPUT_DEV /dev/pwm_output + fi + + if mixer load $OUTPUT_DEV $MIXER_FILE + then + echo "[init] Mixer loaded: $MIXER_FILE" + else + echo "[init] Error loading mixer: $MIXER_FILE" + tone_alarm $TUNE_OUT_ERROR + fi +else + if [ $MIXER != skip ] + then + echo "[init] Mixer not defined" + tone_alarm $TUNE_OUT_ERROR + fi +fi + +if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == io ] +then + if [ $PWM_OUTPUTS != none ] + then + # + # Set PWM output frequency + # + if [ $PWM_RATE != none ] + then + echo "[init] Set PWM rate: $PWM_RATE" + pwm rate -c $PWM_OUTPUTS -r $PWM_RATE + fi + + # + # Set disarmed, min and max PWM values + # + if [ $PWM_DISARMED != none ] + then + echo "[init] Set PWM disarmed: $PWM_DISARMED" + pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED + fi + if [ $PWM_MIN != none ] + then + echo "[init] Set PWM min: $PWM_MIN" + pwm min -c $PWM_OUTPUTS -p $PWM_MIN + fi + if [ $PWM_MAX != none ] + then + echo "[init] Set PWM max: $PWM_MAX" + pwm max -c $PWM_OUTPUTS -p $PWM_MAX + fi + fi +fi diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io index aaf91b316..6e8fdbc0f 100644 --- a/ROMFS/px4fmu_common/init.d/rc.io +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -1,23 +1,20 @@ # -# Start PX4IO interface (depends on orb, commander) +# Init PX4IO interface # -if px4io start -then - # - # Allow PX4IO to recover from midair restarts. - # this is very unlikely, but quite safe and robust. - px4io recovery - # - # Disable px4io topic limiting - # - if [ $BOARD == fmuv1 ] - then - px4io limit 200 - else - px4io limit 400 - fi -else - # SOS - tone_alarm error +# +# Allow PX4IO to recover from midair restarts. +# +px4io recovery + +# +# Adjust PX4IO update rate limit +# +set PX4IO_LIMIT 400 +if hw_ver compare PX4FMU_V1 +then + set PX4IO_LIMIT 200 fi + +echo "[init] Set PX4IO update rate limit: $PX4IO_LIMIT Hz" +px4io limit $PX4IO_LIMIT diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index dc4be8055..c5aef8273 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -1,14 +1,16 @@ #!nsh # -# Initialise logging services. +# Initialize logging services. # if [ -d /fs/microsd ] then - if [ $BOARD == fmuv1 ] + if hw_ver compare PX4FMU_V1 then - sdlog2 start -r 50 -a -b 16 + echo "Start sdlog2 at 50Hz" + sdlog2 start -r 50 -a -b 8 -t else - sdlog2 start -r 200 -a -b 16 + echo "Start sdlog2 at 200Hz" + sdlog2 start -r 200 -a -b 16 -t fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_apps b/ROMFS/px4fmu_common/init.d/rc.mc_apps new file mode 100644 index 000000000..ed3939757 --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.mc_apps @@ -0,0 +1,11 @@ +#!nsh +# +# Standard apps for multirotors: +# att & pos estimator, att & pos control. +# + +attitude_estimator_ekf start +position_estimator_inav start + +mc_att_control start +mc_pos_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_defaults b/ROMFS/px4fmu_common/init.d/rc.mc_defaults new file mode 100644 index 000000000..4db62607a --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.mc_defaults @@ -0,0 +1,43 @@ +#!nsh + +set VEHICLE_TYPE mc + +if [ $DO_AUTOCONFIG == yes ] +then + param set MC_ROLL_P 7.0 + param set MC_ROLLRATE_P 0.1 + param set MC_ROLLRATE_I 0.0 + param set MC_ROLLRATE_D 0.003 + param set MC_PITCH_P 7.0 + param set MC_PITCHRATE_P 0.1 + param set MC_PITCHRATE_I 0.0 + param set MC_PITCHRATE_D 0.003 + param set MC_YAW_P 2.8 + param set MC_YAWRATE_P 0.2 + param set MC_YAWRATE_I 0.0 + param set MC_YAWRATE_D 0.0 + param set MC_YAW_FF 0.5 + + param set MPC_THR_MAX 1.0 + param set MPC_THR_MIN 0.1 + param set MPC_XY_P 1.0 + param set MPC_XY_VEL_P 0.1 + param set MPC_XY_VEL_I 0.02 + param set MPC_XY_VEL_D 0.01 + param set MPC_XY_VEL_MAX 5 + param set MPC_XY_FF 0.5 + param set MPC_Z_P 1.0 + param set MPC_Z_VEL_P 0.1 + param set MPC_Z_VEL_I 0.02 + param set MPC_Z_VEL_D 0.0 + param set MPC_Z_VEL_MAX 3 + param set MPC_Z_FF 0.5 + param set MPC_TILT_MAX 1.0 + param set MPC_LAND_SPEED 1.0 + param set MPC_LAND_TILT 0.3 +fi + +set PWM_RATE 400 +set PWM_DISARMED 900 +set PWM_MIN 1075 +set PWM_MAX 2000 diff --git a/ROMFS/px4fmu_common/init.d/rc.multirotor b/ROMFS/px4fmu_common/init.d/rc.multirotor deleted file mode 100644 index bc550ac5a..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.multirotor +++ /dev/null @@ -1,39 +0,0 @@ -#!nsh -# -# Standard everything needed for multirotors except mixer, actuator output and mavlink -# - -# -# Start the sensors and test them. -# -sh /etc/init.d/rc.sensors - -# -# Start logging (depends on sensors) -# -sh /etc/init.d/rc.logging - -# -# Start GPS interface (depends on orb) -# -gps start - -# -# Start the attitude estimator -# -attitude_estimator_ekf start - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index 070a4e7e3..235be2431 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -3,48 +3,45 @@ # Standard startup script for PX4FMU onboard sensor drivers. # -# -# Start sensor drivers here. -# - ms5611 start adc start -# mag might be external +# Mag might be external if hmc5883 start then - echo "using HMC5883" + echo "[init] Using HMC5883" fi if mpu6000 start then - echo "using MPU6000" + echo "[init] Using MPU6000" fi if l3gd20 start then - echo "using L3GD20(H)" + echo "[init] Using L3GD20(H)" fi -if lsm303d start +if hw_ver compare PX4FMU_V2 then - set BOARD fmuv2 -else - set BOARD fmuv1 + if lsm303d start + then + echo "[init] Using LSM303D" + fi fi # Start airspeed sensors if meas_airspeed start then - echo "using MEAS airspeed sensor" + echo "[init] Using MEAS airspeed sensor" else if ets_airspeed start then - echo "using ETS airspeed sensor (bus 3)" + echo "[init] Using ETS airspeed sensor (bus 3)" else if ets_airspeed start -b 1 then - echo "Using ETS airspeed sensor (bus 1)" + echo "[init] Using ETS airspeed sensor (bus 1)" fi fi fi diff --git a/ROMFS/px4fmu_common/init.d/rc.standalone b/ROMFS/px4fmu_common/init.d/rc.standalone deleted file mode 100644 index 67e95215b..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.standalone +++ /dev/null @@ -1,13 +0,0 @@ -#!nsh -# -# Flight startup script for PX4FMU standalone configuration. -# - -echo "[init] doing standalone PX4FMU startup..." - -# -# Start the ORB -# -uorb start - -echo "[init] startup done" diff --git a/ROMFS/px4fmu_common/init.d/rc.usb b/ROMFS/px4fmu_common/init.d/rc.usb index ccf2cd47e..0cd8a0e04 100644 --- a/ROMFS/px4fmu_common/init.d/rc.usb +++ b/ROMFS/px4fmu_common/init.d/rc.usb @@ -36,39 +36,6 @@ then echo "Commander started" fi -# Start px4io if present -if px4io start -then - echo "PX4IO driver started" -else - if fmu mode_serial - then - echo "FMU driver started" - fi -fi - -# Start sensors -sh /etc/init.d/rc.sensors - -# Start one of the estimators -if attitude_estimator_ekf status -then - echo "multicopter att filter running" -else - if att_pos_estimator_ekf status - then - echo "fixedwing att filter running" - else - attitude_estimator_ekf start - fi -fi - -# Start GPS -if gps start -then - echo "GPS started" -fi - echo "MAVLink started, exiting shell.." # Exit shell to make it available to MAVLink diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 59d8cbc3a..763f9be60 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -3,44 +3,44 @@ # PX4FMU startup script. # -# Default to auto-start mode. An init script on the microSD card -# can change this to prevent automatic startup of the flight script. +# Default to auto-start mode. # set MODE autostart -set logfile /fs/microsd/bootlog.txt +set RC_FILE /fs/microsd/etc/rc.txt +set CONFIG_FILE /fs/microsd/etc/config.txt +set EXTRAS_FILE /fs/microsd/etc/extras.txt + +set TUNE_OUT_ERROR ML<<CP4CP4CP4CP4CP4 # # Try to mount the microSD card. # -echo "[init] looking for microSD..." +echo "[init] Looking for microSD..." if mount -t vfat /dev/mmcsd0 /fs/microsd then - echo "[init] card mounted at /fs/microsd" + set LOG_FILE /fs/microsd/bootlog.txt + echo "[init] microSD card mounted at /fs/microsd" # Start playing the startup tune tone_alarm start else - echo "[init] no microSD card found" + set LOG_FILE /dev/null + echo "[init] No microSD card found" # Play SOS tone_alarm error fi # # Look for an init script on the microSD card. +# Disable autostart if the script found. # -# To prevent automatic startup in the current flight mode, -# the script should set MODE to some other value. -# -if [ -f /fs/microsd/etc/rc ] -then - echo "[init] reading /fs/microsd/etc/rc" - sh /fs/microsd/etc/rc -fi -# Also consider rc.txt files -if [ -f /fs/microsd/etc/rc.txt ] +if [ -f $RC_FILE ] then - echo "[init] reading /fs/microsd/etc/rc.txt" - sh /fs/microsd/etc/rc.txt + echo "[init] Executing init script: $RC_FILE" + sh $RC_FILE + set MODE custom +else + echo "[init] Init script not found: $RC_FILE" fi # if this is an APM build then there will be a rc.APM script @@ -52,20 +52,19 @@ then echo "[init] USB interface connected" fi - echo "Running rc.APM" + echo "[init] Running rc.APM" # if APM startup is successful then nsh will exit sh /etc/init.d/rc.APM fi if [ $MODE == autostart ] then + echo "[init] AUTOSTART mode" + # - # Start terminal + # Start CDC/ACM serial driver # - if sercon - then - echo "USB connected" - fi + sercon # # Start the ORB (first app to start) @@ -73,84 +72,146 @@ then uorb start # - # Load microSD params - # - #if ramtron start - #then - # param select /ramtron/params - # if [ -f /ramtron/params ] - # then - # param load /ramtron/params - # fi - #else - param select /fs/microsd/params - if [ -f /fs/microsd/params ] - then - if param load /fs/microsd/params - then - echo "Parameters loaded" - else - echo "Parameter file corrupt - ignoring" - fi - fi - #fi + # Load parameters + # + set PARAM_FILE /fs/microsd/params + if mtd start + then + set PARAM_FILE /fs/mtd_params + fi + + param select $PARAM_FILE + if param load + then + echo "[init] Parameters loaded: $PARAM_FILE" + else + echo "[init] ERROR: Parameters loading failed: $PARAM_FILE" + fi # # Start system state indicator # if rgbled start then - echo "Using external RGB Led" + echo "[init] Using external RGB Led" else if blinkm start then + echo "[init] Using blinkm" blinkm systemstate fi fi # - # Start the Commander (needs to be this early for in-air-restarts) + # Set default values # - commander start - + set HIL no + set VEHICLE_TYPE none + set MIXER none + set USE_IO yes + set OUTPUT_MODE none + set PWM_OUTPUTS none + set PWM_RATE none + set PWM_DISARMED none + set PWM_MIN none + set PWM_MAX none + set MKBLCTRL_MODE none + set FMU_MODE pwm + set MAV_TYPE none + # - # Start the datamanager + # Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts # - dataman start - + if param compare SYS_AUTOCONFIG 1 + then + set DO_AUTOCONFIG yes + else + set DO_AUTOCONFIG no + fi + # - # Start the Navigator + # Set parameters and env variables for selected AUTOSTART # - navigator start - - if param compare SYS_AUTOSTART 1000 + if param compare SYS_AUTOSTART 0 then - sh /etc/init.d/1000_rc_fw_easystar.hil - set MODE custom + echo "[init] Don't try to find autostart script" + else + sh /etc/init.d/rc.autostart fi - - if param compare SYS_AUTOSTART 1001 + + # + # Override parameters from user configuration file + # + if [ -f $CONFIG_FILE ] then - sh /etc/init.d/1001_rc_quad.hil - set MODE custom + echo "[init] Reading config: $CONFIG_FILE" + sh $CONFIG_FILE + else + echo "[init] Config file not found: $CONFIG_FILE" fi - - if param compare SYS_AUTOSTART 1002 + + # + # If autoconfig parameter was set, reset it and save parameters + # + if [ $DO_AUTOCONFIG == yes ] then - sh /etc/init.d/1002_rc_fw_state.hil - set MODE custom + param set SYS_AUTOCONFIG 0 + param save fi - if param compare SYS_AUTOSTART 1003 - then - sh /etc/init.d/1003_rc_quad_+.hil - set MODE custom - fi - - if param compare SYS_AUTOSTART 1004 + set IO_PRESENT no + + if [ $USE_IO == yes ] then - sh /etc/init.d/1004_rc_fw_Rascal110.hil - set MODE custom + # + # Check if PX4IO present and update firmware if needed + # + if [ -f /etc/extras/px4io-v2_default.bin ] + then + set IO_FILE /etc/extras/px4io-v2_default.bin + else + set IO_FILE /etc/extras/px4io-v1_default.bin + fi + + if px4io checkcrc $IO_FILE + then + echo "[init] PX4IO CRC OK" + echo "PX4IO CRC OK" >> $LOG_FILE + + set IO_PRESENT yes + else + echo "[init] Trying to update" + echo "PX4IO Trying to update" >> $LOG_FILE + + tone_alarm MLL32CP8MB + + if px4io forceupdate 14662 $IO_FILE + then + usleep 500000 + if px4io checkcrc $IO_FILE + then + echo "[init] PX4IO CRC OK, update successful" + echo "PX4IO CRC OK after updating" >> $LOG_FILE + tone_alarm MLL8CDE + + set IO_PRESENT yes + else + echo "[init] ERROR: PX4IO update failed" + echo "PX4IO update failed" >> $LOG_FILE + tone_alarm $TUNE_OUT_ERROR + fi + else + echo "[init] ERROR: PX4IO update failed" + echo "PX4IO update failed" >> $LOG_FILE + tone_alarm $TUNE_OUT_ERROR + fi + fi + + if [ $IO_PRESENT == no ] + then + echo "[init] ERROR: PX4IO not found" + tone_alarm $TUNE_OUT_ERROR + fi fi if param compare SYS_AUTOSTART 901 @@ -159,251 +220,337 @@ then set MODE custom fi - if [ $MODE != custom ] + # + # Set default output if not set + # + if [ $OUTPUT_MODE == none ] then - # Try to get an USB console - nshterm /dev/ttyACM0 & + if [ $USE_IO == yes ] + then + set OUTPUT_MODE io + else + set OUTPUT_MODE fmu + fi fi - # - # Upgrade PX4IO firmware - # + if [ $OUTPUT_MODE == io -a $IO_PRESENT != yes ] + then + # Need IO for output but it not present, disable output + set OUTPUT_MODE none + echo "[init] ERROR: PX4IO not found, disabling output" + + # Avoid using ttyS0 for MAVLink on FMUv1 + if hw_ver compare PX4FMU_V1 + then + set FMU_MODE serial + fi + fi - if [ -f /etc/extras/px4io-v2_default.bin ] + if [ $OUTPUT_MODE == ardrone ] then - set io_file /etc/extras/px4io-v2_default.bin - else - set io_file /etc/extras/px4io-v1_default.bin + set FMU_MODE gpio_serial fi - if px4io start + if [ $HIL == yes ] then - echo "PX4IO OK" - echo "PX4IO OK" >> $logfile + set OUTPUT_MODE hil + if hw_ver compare PX4FMU_V1 + then + set FMU_MODE serial + fi + else + # Try to get an USB console if not in HIL mode + nshterm /dev/ttyACM0 & fi - if px4io checkcrc $io_file + # + # Start the Commander (needs to be this early for in-air-restarts) + # + commander start + + # + # Start primary output + # + set TTYS1_BUSY no + + # If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output + if [ $OUTPUT_MODE != none ] then - echo "PX4IO CRC OK" - echo "PX4IO CRC OK" >> $logfile - else - echo "PX4IO CRC failure" - echo "PX4IO CRC failure" >> $logfile - tone_alarm MBABGP - if px4io forceupdate 14662 $io_file + if [ $OUTPUT_MODE == io ] then - usleep 200000 + echo "[init] Use PX4IO PWM as primary output" if px4io start then - echo "PX4IO restart OK" - echo "PX4IO restart OK" >> $logfile - tone_alarm MSPAA + echo "[init] PX4IO started" + sh /etc/init.d/rc.io + else + echo "[init] ERROR: PX4IO start failed" + tone_alarm $TUNE_OUT_ERROR + fi + fi + if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ] + then + echo "[init] Use FMU as primary output" + if fmu mode_$FMU_MODE + then + echo "[init] FMU mode_$FMU_MODE started" + else + echo "[init] ERROR: FMU mode_$FMU_MODE start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + if hw_ver compare PX4FMU_V1 + then + if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] + then + set TTYS1_BUSY yes + fi + if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ] + then + set TTYS1_BUSY yes + fi + fi + fi + if [ $OUTPUT_MODE == mkblctrl ] + then + echo "[init] Use MKBLCTRL as primary output" + set MKBLCTRL_ARG "" + if [ $MKBLCTRL_MODE == x ] + then + set MKBLCTRL_ARG "-mkmode x" + fi + if [ $MKBLCTRL_MODE == + ] + then + set MKBLCTRL_ARG "-mkmode +" + fi + + if mkblctrl $MKBLCTRL_ARG + then + echo "[init] MKBLCTRL started" else - echo "PX4IO restart failed" - echo "PX4IO restart failed" >> $logfile - tone_alarm MNGGG - sh /etc/init.d/rc.error + echo "[init] ERROR: MKBLCTRL start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + fi + if [ $OUTPUT_MODE == hil ] + then + echo "[init] Use HIL as primary output" + if hil mode_port2_pwm8 + then + echo "[init] HIL output started" + else + echo "[init] ERROR: HIL output start failed" + tone_alarm $TUNE_OUT_ERROR + fi + fi + + # + # Start IO or FMU for RC PPM input if needed + # + if [ $IO_PRESENT == yes ] + then + if [ $OUTPUT_MODE != io ] + then + if px4io start + then + echo "[init] PX4IO started" + sh /etc/init.d/rc.io + else + echo "[init] ERROR: PX4IO start failed" + tone_alarm $TUNE_OUT_ERROR + fi fi else - echo "PX4IO update failed" - echo "PX4IO update failed" >> $logfile - tone_alarm MNGGG + if [ $OUTPUT_MODE != fmu -a $OUTPUT_MODE != ardrone ] + then + if fmu mode_$FMU_MODE + then + echo "[init] FMU mode_$FMU_MODE started" + else + echo "[init] ERROR: FMU mode_$FMU_MODE start failed" + tone_alarm $TUNE_OUT_ERROR + fi + + if hw_ver compare PX4FMU_V1 + then + if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] + then + set TTYS1_BUSY yes + fi + if [ $FMU_MODE == pwm_gpio -o $OUTPUT_MODE == ardrone ] + then + set TTYS1_BUSY yes + fi + fi + fi fi fi # - # Check if auto-setup from one of the standard scripts is wanted - # SYS_AUTOSTART = 0 means no autostart (default) + # MAVLink # + set EXIT_ON_END no - if param compare SYS_AUTOSTART 8 + if [ $HIL == yes ] then - sh /etc/init.d/08_ardrone - set MODE custom + sleep 1 + mavlink start -b 230400 -d /dev/ttyACM0 + usleep 5000 + else + if [ $TTYS1_BUSY == yes ] + then + # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else + mavlink start -d /dev/ttyS0 + usleep 5000 + + # Exit from nsh to free port for mavlink + set EXIT_ON_END yes + else + # Start MAVLink on default port: ttyS1 + mavlink start + usleep 5000 + fi fi - if param compare SYS_AUTOSTART 9 - then - sh /etc/init.d/09_ardrone_flow - set MODE custom - fi + # + # Start the datamanager + # + dataman start - if param compare SYS_AUTOSTART 10 - then - sh /etc/init.d/10_dji_f330 - set MODE custom - fi - - if param compare SYS_AUTOSTART 11 - then - sh /etc/init.d/11_dji_f450 - set MODE custom - fi - - if param compare SYS_AUTOSTART 12 - then - set MIXER /etc/mixers/FMU_hex_x.mix - sh /etc/init.d/12-13_hex - set MODE custom - fi - - if param compare SYS_AUTOSTART 13 - then - set MIXER /etc/mixers/FMU_hex_+.mix - sh /etc/init.d/12-13_hex - set MODE custom - fi + # + # Start the navigator + # + navigator start - if param compare SYS_AUTOSTART 15 - then - sh /etc/init.d/15_tbs_discovery - set MODE custom - fi - - if param compare SYS_AUTOSTART 16 - then - sh /etc/init.d/16_3dr_iris - set MODE custom - fi + # + # Sensors, Logging, GPS + # + echo "[init] Start sensors" + sh /etc/init.d/rc.sensors - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame - if param compare SYS_AUTOSTART 17 + if [ $HIL == no ] then - set MKBLCTRL_MODE no - set MKBLCTRL_FRAME x - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom + echo "[init] Start logging" + sh /etc/init.d/rc.logging + + echo "[init] Start GPS" + gps start fi - - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame - if param compare SYS_AUTOSTART 18 + + # + # Start up ARDrone Motor interface + # + if [ $OUTPUT_MODE == ardrone ] then - set MKBLCTRL_MODE no - set MKBLCTRL_FRAME + - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom + ardrone_interface start -d /dev/ttyS1 fi - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 19 + # + # Fixed wing setup + # + if [ $VEHICLE_TYPE == fw ] then - set MKBLCTRL_MODE yes - set MKBLCTRL_FRAME x - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom + echo "[init] Vehicle type: FIXED WING" + + if [ $MIXER == none ] + then + # Set default mixer for fixed wing if not defined + set MIXER FMU_AERT + fi + + if [ $MAV_TYPE == none ] + then + # Use MAV_TYPE = 1 (fixed wing) if not defined + set MAV_TYPE 1 + fi + + param set MAV_TYPE $MAV_TYPE + + # Load mixer and configure outputs + sh /etc/init.d/rc.interface + + # Start standard fixedwing apps + sh /etc/init.d/rc.fw_apps fi - # PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing - if param compare SYS_AUTOSTART 20 + # + # Multicopters setup + # + if [ $VEHICLE_TYPE == mc ] then - set MKBLCTRL_MODE yes - set MKBLCTRL_FRAME + - sh /etc/init.d/rc.custom_dji_f330_mkblctrl - set MODE custom - fi + echo "[init] Vehicle type: MULTICOPTER" - # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 21 - then - set FRAME_GEOMETRY x - set ESC_MAKER afro - sh /etc/init.d/rc.custom_io_esc - set MODE custom - fi + if [ $MIXER == none ] + then + echo "Default mixer for multicopter not defined" + fi - # PX4FMU v1 with IO + PPM-based ESCs on Quad X-shape frame - if param compare SYS_AUTOSTART 22 - then - set FRAME_GEOMETRY w - sh /etc/init.d/rc.custom_io_esc - set MODE custom - fi - - if param compare SYS_AUTOSTART 30 - then - sh /etc/init.d/30_io_camflyer - set MODE custom + if [ $MAV_TYPE == none ] + then + # Use mixer to detect vehicle type + if [ $MIXER == FMU_quad_x -o $MIXER == FMU_quad_+ ] + then + set MAV_TYPE 2 + fi + if [ $MIXER == FMU_quad_w ] + then + set MAV_TYPE 2 + fi + if [ $MIXER == FMU_hexa_x -o $MIXER == FMU_hexa_+ ] + then + set MAV_TYPE 13 + fi + if [ $MIXER == hexa_cox ] + then + set MAV_TYPE 13 + fi + if [ $MIXER == FMU_octo_x -o $MIXER == FMU_octo_+ ] + then + set MAV_TYPE 14 + fi + if [ $MIXER == FMU_octo_cox ] + then + set MAV_TYPE 14 + fi + fi + + # Still no MAV_TYPE found + if [ $MAV_TYPE == none ] + then + echo "Unknown MAV_TYPE" + else + param set MAV_TYPE $MAV_TYPE + fi + + # Load mixer and configure outputs + sh /etc/init.d/rc.interface + + # Start standard multicopter apps + sh /etc/init.d/rc.mc_apps fi - if param compare SYS_AUTOSTART 31 - then - sh /etc/init.d/31_io_phantom - set MODE custom - fi - - if param compare SYS_AUTOSTART 32 + # + # Generic setup (autostart ID not found) + # + if [ $VEHICLE_TYPE == none ] then - sh /etc/init.d/32_skywalker_x5 - set MODE custom - fi + echo "[init] Vehicle type: No autostart ID found" - if param compare SYS_AUTOSTART 40 - then - sh /etc/init.d/40_io_segway - set MODE custom - fi - - if param compare SYS_AUTOSTART 100 - then - sh /etc/init.d/100_mpx_easystar - set MODE custom fi - if param compare SYS_AUTOSTART 101 + # Start any custom addons + if [ -f $EXTRAS_FILE ] then - sh /etc/init.d/101_hk_bixler - set MODE custom + echo "[init] Starting addons script: $EXTRAS_FILE" + sh $EXTRAS_FILE + else + echo "[init] Addons script not found: $EXTRAS_FILE" fi - if param compare SYS_AUTOSTART 102 - then - sh /etc/init.d/102_3dr_skywalker - set MODE custom - fi - - if param compare SYS_AUTOSTART 900 - then - sh /etc/init.d/900_bottle_drop_test - set MODE custom - fi - - # Start any custom extensions that might be missing - if [ -f /fs/microsd/etc/rc.local ] + if [ $EXIT_ON_END == yes ] then - sh /fs/microsd/etc/rc.local - fi - - # If none of the autostart scripts triggered, get a minimal setup - if [ $MODE == autostart ] - then - # Telemetry port is on both FMU boards ttyS1 - # but the AR.Drone motors can be get 'flashed' - # if starting MAVLink on them - so do not - # start it as default (default link: USB) - - # Start commander - commander start - - # Start px4io if present - if px4io detect - then - px4io start - else - if fmu mode_serial - then - echo "FMU driver (no PWM) started" - fi - fi - - # Start sensors - sh /etc/init.d/rc.sensors - - # Start one of the estimators - attitude_estimator_ekf start - - # Start GPS - gps start - + exit fi # End of autostart diff --git a/ROMFS/px4fmu_common/logging/conv.zip b/ROMFS/px4fmu_common/logging/conv.zip Binary files differindex 7cb837e56..7f485184c 100644 --- a/ROMFS/px4fmu_common/logging/conv.zip +++ b/ROMFS/px4fmu_common/logging/conv.zip diff --git a/ROMFS/px4fmu_common/mixers/FMU_FX79.mix b/ROMFS/px4fmu_common/mixers/FMU_FX79.mix new file mode 100755 index 000000000..0a1dca98d --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/FMU_FX79.mix @@ -0,0 +1,72 @@ +FX-79 Delta-wing mixer for PX4FMU +================================= + +Designed for FX-79. + +TODO (sjwilks): Add mixers for flaps. + +This file defines mixers suitable for controlling a delta wing aircraft using +PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU +servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is +assumed to be unused. + +Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0 +(roll), 1 (pitch) and 3 (thrust). + +See the README for more information on the scaler format. + +Elevon mixers +------------- +Three scalers total (output, roll, pitch). + +On the assumption that the two elevon servos are physically reversed, the pitch +input is inverted between the two servos. + +The scaling factor for roll inputs is adjusted to implement differential travel +for the elevons. + +M: 2 +O: 10000 10000 0 -10000 10000 +S: 0 0 5000 8000 0 -10000 10000 +S: 0 1 8000 8000 0 -10000 10000 + +M: 2 +O: 10000 10000 0 -10000 10000 +S: 0 0 8000 5000 0 -10000 10000 +S: 0 1 -8000 -8000 0 -10000 10000 + +Output 2 +-------- +This mixer is empty. + +Z: + +Motor speed mixer +----------------- +Two scalers total (output, thrust). + +This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1) +range. Inputs below zero are treated as zero. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 3 0 20000 -10000 -10000 10000 + +Gimbal / flaps / payload mixer for last four channels +----------------------------------------------------- + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 4 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 5 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 6 10000 10000 0 -10000 10000 + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 7 10000 10000 0 -10000 10000 diff --git a/ROMFS/px4fmu_common/mixers/FMU_Q.mix b/ROMFS/px4fmu_common/mixers/FMU_Q.mix index 17ff71151..b8ecbc879 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_Q.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_Q.mix @@ -25,13 +25,13 @@ for the elevons. M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -5000 -8000 0 -10000 10000 -S: 0 1 8000 8000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 6000 6000 0 -10000 10000 M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -8000 -5000 0 -10000 10000 -S: 0 1 -8000 -8000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 -6000 -6000 0 -10000 10000 Output 2 -------- diff --git a/ROMFS/px4fmu_common/mixers/FMU_X5.mix b/ROMFS/px4fmu_common/mixers/FMU_X5.mix index 610868354..80e3bac09 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_X5.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_X5.mix @@ -23,13 +23,13 @@ for the elevons. M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -3000 -5000 0 -10000 10000 -S: 0 1 -5000 -5000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 6000 6000 0 -10000 10000 M: 2 O: 10000 10000 0 -10000 10000 -S: 0 0 -5000 -3000 0 -10000 10000 -S: 0 1 5000 5000 0 -10000 10000 +S: 0 0 -8000 -8000 0 -10000 10000 +S: 0 1 -6000 -6000 0 -10000 10000 Output 2 -------- @@ -48,7 +48,7 @@ M: 1 O: 10000 10000 0 -10000 10000 S: 0 3 0 20000 -10000 -10000 10000 -Gimbal / payload mixer for last four channels +Gimbal / flaps / payload mixer for last four channels ----------------------------------------------------- M: 1 @@ -66,4 +66,3 @@ S: 0 6 10000 10000 0 -10000 10000 M: 1 O: 10000 10000 0 -10000 10000 S: 0 7 10000 10000 0 -10000 10000 - diff --git a/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix b/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix deleted file mode 100644 index f8f9f0e4d..000000000 --- a/ROMFS/px4fmu_common/mixers/FMU_hex_+.mix +++ /dev/null @@ -1,18 +0,0 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a hexacopter in the + configuration. All controls -are mixed 100%. - -R: 6+ 10000 10000 10000 0 - -Gimbal / payload mixer for last two channels ------------------------------------------------------ - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 6 10000 10000 0 -10000 10000 - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 7 10000 10000 0 -10000 10000 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix b/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix deleted file mode 100644 index 26b40b9e9..000000000 --- a/ROMFS/px4fmu_common/mixers/FMU_hex_x.mix +++ /dev/null @@ -1,18 +0,0 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a hexacopter in the X configuration. All controls -are mixed 100%. - -R: 6x 10000 10000 10000 0 - -Gimbal / payload mixer for last two channels ------------------------------------------------------ - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 6 10000 10000 0 -10000 10000 - -M: 1 -O: 10000 10000 0 -10000 10000 -S: 0 7 10000 10000 0 -10000 10000 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix new file mode 100644 index 000000000..e608b459f --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_+.mix @@ -0,0 +1,3 @@ +# Hexa + + +R: 6+ 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix new file mode 100644 index 000000000..16e6e22f9 --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_x.mix @@ -0,0 +1,3 @@ +# Hexa X + +R: 6x 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix index 2cb70e814..397e22086 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_+.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a octocopter in the + configuration. All controls -are mixed 100%. +# Octo + R: 8+ 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix index 51cebb785..f7845450d 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_cox.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a Coaxial Octocopter in the X configuration. All controls -are mixed 100%. +# Octo coaxial R: 8c 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix b/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix index edc71f013..c9a348aa4 100644 --- a/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_octo_x.mix @@ -1,7 +1,3 @@ -Multirotor mixer for PX4FMU -=========================== - -This file defines a single mixer for a octocopter in the X configuration. All controls -are mixed 100%. +# Octo X R: 8x 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_common/mixers/README b/ROMFS/px4fmu_common/mixers/README deleted file mode 100644 index 6649c53c2..000000000 --- a/ROMFS/px4fmu_common/mixers/README +++ /dev/null @@ -1,154 +0,0 @@ -PX4 mixer definitions -===================== - -Files in this directory implement example mixers that can be used as a basis -for customisation, or for general testing purposes. - -Mixer basics ------------- - -Mixers combine control values from various sources (control tasks, user inputs, -etc.) and produce output values suitable for controlling actuators; servos, -motors, switches and so on. - -An actuator derives its value from the combination of one or more control -values. Each of the control values is scaled according to the actuator's -configuration and then combined to produce the actuator value, which may then be -further scaled to suit the specific output type. - -Internally, all scaling is performed using floating point values. Inputs and -outputs are clamped to the range -1.0 to 1.0. - -control control control - | | | - v v v - scale scale scale - | | | - | v | - +-------> mix <------+ - | - scale - | - v - out - -Scaling -------- - -Basic scalers provide linear scaling of the input to the output. - -Each scaler allows the input value to be scaled independently for inputs -greater/less than zero. An offset can be applied to the output, and lower and -upper boundary constraints can be applied. Negative scaling factors cause the -output to be inverted (negative input produces positive output). - -Scaler pseudocode: - -if (input < 0) - output = (input * NEGATIVE_SCALE) + OFFSET -else - output = (input * POSITIVE_SCALE) + OFFSET - -if (output < LOWER_LIMIT) - output = LOWER_LIMIT -if (output > UPPER_LIMIT) - output = UPPER_LIMIT - -Syntax ------- - -Mixer definitions are text files; lines beginning with a single capital letter -followed by a colon are significant. All other lines are ignored, meaning that -explanatory text can be freely mixed with the definitions. - -Each file may define more than one mixer; the allocation of mixers to actuators -is specific to the device reading the mixer definition, and the number of -actuator outputs generated by a mixer is specific to the mixer. - -A mixer begins with a line of the form - - <tag>: <mixer arguments> - -The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a -multirotor mixer, etc. - -Null Mixer -.......... - -A null mixer consumes no controls and generates a single actuator output whose -value is always zero. Typically a null mixer is used as a placeholder in a -collection of mixers in order to achieve a specific pattern of actuator outputs. - -The null mixer definition has the form: - - Z: - -Simple Mixer -............ - -A simple mixer combines zero or more control inputs into a single actuator -output. Inputs are scaled, and the mixing function sums the result before -applying an output scaler. - -A simple mixer definition begins with: - - M: <control count> - O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> - -If <control count> is zero, the sum is effectively zero and the mixer will -output a fixed value that is <offset> constrained by <lower limit> and <upper -limit>. - -The second line defines the output scaler with scaler parameters as discussed -above. Whilst the calculations are performed as floating-point operations, the -values stored in the definition file are scaled by a factor of 10000; i.e. an -offset of -0.5 is encoded as -5000. - -The definition continues with <control count> entries describing the control -inputs and their scaling, in the form: - - S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit> - -The <group> value identifies the control group from which the scaler will read, -and the <index> value an offset within that group. These values are specific to -the device reading the mixer definition. - -When used to mix vehicle controls, mixer group zero is the vehicle attitude -control group, and index values zero through three are normally roll, pitch, -yaw and thrust respectively. - -The remaining fields on the line configure the control scaler with parameters as -discussed above. Whilst the calculations are performed as floating-point -operations, the values stored in the definition file are scaled by a factor of -10000; i.e. an offset of -0.5 is encoded as -5000. - -Multirotor Mixer -................ - -The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust) -into a set of actuator outputs intended to drive motor speed controllers. - -The mixer definition is a single line of the form: - -R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband> - -The supported geometries include: - - 4x - quadrotor in X configuration - 4+ - quadrotor in + configuration - 6x - hexcopter in X configuration - 6+ - hexcopter in + configuration - 8x - octocopter in X configuration - 8+ - octocopter in + configuration - -Each of the roll, pitch and yaw scale values determine scaling of the roll, -pitch and yaw controls relative to the thrust control. Whilst the calculations -are performed as floating-point operations, the values stored in the definition -file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000. - -Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the -thrust input ranges from 0.0 to 1.0. Output for each actuator is in the -range -1.0 to 1.0. - -In the case where an actuator saturates, all actuator values are rescaled so that -the saturating actuator is limited to 1.0. diff --git a/ROMFS/px4fmu_common/mixers/hexa_cox.mix b/ROMFS/px4fmu_common/mixers/hexa_cox.mix new file mode 100644 index 000000000..497786feb --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/hexa_cox.mix @@ -0,0 +1,3 @@ +# Hexa coaxial + +R: 6c 10000 10000 10000 0 diff --git a/ROMFS/px4fmu_logging/init.d/rcS b/ROMFS/px4fmu_logging/init.d/rcS deleted file mode 100644 index 7b8856719..000000000 --- a/ROMFS/px4fmu_logging/init.d/rcS +++ /dev/null @@ -1,88 +0,0 @@ -#!nsh -# -# PX4FMU startup script for logging purposes -# - -# -# Try to mount the microSD card. -# -echo "[init] looking for microSD..." -if mount -t vfat /dev/mmcsd0 /fs/microsd -then - echo "[init] card mounted at /fs/microsd" - # Start playing the startup tune - tone_alarm start -else - echo "[init] no microSD card found" - # Play SOS - tone_alarm error -fi - -uorb start - -# -# Start sensor drivers here. -# - -ms5611 start -adc start - -# mag might be external -if hmc5883 start -then - echo "using HMC5883" -fi - -if mpu6000 start -then - echo "using MPU6000" -fi - -if l3gd20 start -then - echo "using L3GD20(H)" -fi - -if lsm303d start -then - set BOARD fmuv2 -else - set BOARD fmuv1 -fi - -# Start airspeed sensors -if meas_airspeed start -then - echo "using MEAS airspeed sensor" -else - if ets_airspeed start - then - echo "using ETS airspeed sensor (bus 3)" - else - if ets_airspeed start -b 1 - then - echo "Using ETS airspeed sensor (bus 1)" - fi - fi -fi - -# -# Start the sensor collection task. -# IMPORTANT: this also loads param offsets -# ALWAYS start this task before the -# preflight_check. -# -if sensors start -then - echo "SENSORS STARTED" -fi - -sdlog2 start -r 250 -e -b 16 - -if sercon -then - echo "[init] USB interface connected" - - # Try to get an USB console - nshterm /dev/ttyACM0 & -fi
\ No newline at end of file diff --git a/ROMFS/px4fmu_logging/logging/conv.zip b/ROMFS/px4fmu_logging/logging/conv.zip Binary files differdeleted file mode 100644 index 7cb837e56..000000000 --- a/ROMFS/px4fmu_logging/logging/conv.zip +++ /dev/null diff --git a/ROMFS/px4fmu_test/init.d/rcS b/ROMFS/px4fmu_test/init.d/rcS index 6aa1d3d46..56482d140 100644 --- a/ROMFS/px4fmu_test/init.d/rcS +++ b/ROMFS/px4fmu_test/init.d/rcS @@ -2,6 +2,7 @@ # # PX4FMU startup script for test hackery. # +uorb start if sercon then @@ -9,4 +10,68 @@ then # Try to get an USB console nshterm /dev/ttyACM0 & -fi
\ No newline at end of file +fi + +# +# Try to mount the microSD card. +# +echo "[init] looking for microSD..." +if mount -t vfat /dev/mmcsd0 /fs/microsd +then + echo "[init] card mounted at /fs/microsd" + # Start playing the startup tune + tone_alarm start +else + echo "[init] no microSD card found" + # Play SOS + tone_alarm error +fi + +# +# Start a minimal system +# + +if [ -f /etc/extras/px4io-v2_default.bin ] +then + set io_file /etc/extras/px4io-v2_default.bin +else + set io_file /etc/extras/px4io-v1_default.bin +fi + +if px4io start +then + echo "PX4IO OK" +fi + +if px4io checkcrc $io_file +then + echo "PX4IO CRC OK" +else + echo "PX4IO CRC failure" + tone_alarm MBABGP + if px4io forceupdate 14662 $io_file + then + usleep 500000 + if px4io start + then + echo "PX4IO restart OK" + tone_alarm MSPAA + else + echo "PX4IO restart failed" + tone_alarm MNGGG + sleep 5 + reboot + fi + else + echo "PX4IO update failed" + tone_alarm MNGGG + fi +fi + +# +# The presence of this file suggests we're running a mount stress test +# +if [ -f /fs/microsd/mount_test_cmds.txt ] +then + tests mount +fi |