New-style driver for the HMC5883 on I2C.

1 files changed, 868 insertions, 0 deletions

diff --git a/apps/drivers/hmc5883/hmc5883.cpp b/apps/drivers/hmc5883/hmc5883.cpp
new file mode 100644
index 000000000..64a0a932e
--- /dev/null
+++ b/apps/drivers/hmc5883/hmc5883.cpp
@@ -0,0 +1,868 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file hmc5883.cpp
+ *
+ * Driver for the HMC5883 magnetometer connected via I2C.
+ */
+
+#include <nuttx/config.h>
+
+#include <drivers/device/i2c.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <semaphore.h>
+#include <string.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <errno.h>
+#include <stdio.h>
+#include <math.h>
+#include <unistd.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/wqueue.h>
+#include <nuttx/clock.h>
+
+#include <arch/board/up_hrt.h>
+
+#include <systemlib/perf_counter.h>
+
+#include <drivers/drv_mag.h>
+
+
+/*
+ * HMC5883 internal constants and data structures.
+ */
+
+/* Max measurement rate is 160Hz */
+#define HMC5883_CONVERSION_INTERVAL	(1000000 / 160)	/* microseconds */
+
+#define ADDR_CONF_A			0x00
+#define ADDR_CONF_B			0x01
+#define ADDR_MODE			0x02
+#define ADDR_DATA_OUT_X_MSB		0x03
+#define ADDR_DATA_OUT_X_LSB		0x04
+#define ADDR_DATA_OUT_Z_MSB		0x05
+#define ADDR_DATA_OUT_Z_LSB		0x06
+#define ADDR_DATA_OUT_Y_MSB		0x07
+#define ADDR_DATA_OUT_Y_LSB		0x08
+#define ADDR_STATUS			0x09
+#define ADDR_ID_A			0x0a
+#define ADDR_ID_B			0x0b
+#define ADDR_ID_C			0x0c
+
+#define HMC5883L_ADDRESS		0x1E
+
+/* modes not changeable outside of driver */
+#define HMC5883L_MODE_NORMAL		(0 << 0)  /* default */
+#define HMC5883L_MODE_POSITIVE_BIAS	(1 << 0)  /* positive bias */
+#define HMC5883L_MODE_NEGATIVE_BIAS	(1 << 1)  /* negative bias */
+
+#define HMC5883L_AVERAGING_1		(0 << 5) /* conf a register */
+#define HMC5883L_AVERAGING_2		(1 << 5)
+#define HMC5883L_AVERAGING_4		(2 << 5)
+#define HMC5883L_AVERAGING_8		(3 << 5)
+
+#define MODE_REG_CONTINOUS_MODE		(0 << 0)
+#define MODE_REG_SINGLE_MODE		(1 << 0) /* default */
+
+#define STATUS_REG_DATA_OUT_LOCK	(1 << 1) /* page 16: set if data is only partially read, read device to reset */
+#define STATUS_REG_DATA_READY		(1 << 0) /* page 16: set if all axes have valid measurements */
+
+#define ID_A_WHO_AM_I			'H'
+#define ID_B_WHO_AM_I			'4'
+#define ID_C_WHO_AM_I			'3'
+
+
+/* oddly, ERROR is not defined for c++ */
+#ifdef ERROR
+# undef ERROR
+#endif
+static const int ERROR = -1;
+
+class HMC5883 : public device::I2C
+{
+public:
+	HMC5883(int bus);
+	~HMC5883();
+
+	virtual int		init();
+
+	virtual ssize_t		read(struct file *filp, char *buffer, size_t buflen);
+	virtual int		ioctl(struct file *filp, int cmd, unsigned long arg);
+
+	virtual int		open_first(struct file *filp);
+	virtual int		close_last(struct file *filp);
+
+	/**
+	 * Diagnostics - print some basic information about the driver.
+	 */
+	void			print_info();
+
+protected:
+	virtual int		probe();
+
+private:
+	struct work_s		_work;
+	unsigned		_measure_ticks;
+
+	unsigned		_num_reports;
+	volatile unsigned	_next_report;
+	volatile unsigned	_oldest_report;
+	struct mag_report	*_reports;
+
+	bool			_collect_phase;
+
+	int			_mag_topic;
+
+	unsigned		_reads;
+	unsigned		_measure_errors;
+	unsigned		_read_errors;
+	unsigned		_buf_overflows;
+
+	perf_counter_t		_sample_perf;
+
+	/**
+	 * Test whether the device supported by the driver is present at a
+	 * specific address.
+	 *
+	 * @param address	The I2C bus address to probe.
+	 * @return		True if the device is present.
+	 */
+	int			probe_address(uint8_t address);
+
+	/**
+	 * Initialise the automatic measurement state machine and start it.
+	 *
+	 * @note This function is called at open and error time.  It might make sense
+	 *       to make it more aggressive about resetting the bus in case of errors.
+	 */
+	void			start();
+
+	/**
+	 * Stop the automatic measurement state machine.
+	 */
+	void			stop();
+
+	/**
+	 * Perform a poll cycle; collect from the previous measurement
+	 * and start a new one.
+	 *
+	 * This is the heart of the measurement state machine.  This function
+	 * alternately starts a measurement, or collects the data from the
+	 * previous measurement.
+	 *
+	 * When the interval between measurements is greater than the minimum
+	 * measurement interval, a gap is inserted between collection
+	 * and measurement to provide the most recent measurement possible
+	 * at the next interval.
+	 */
+	void			cycle();
+
+	/**
+	 * Static trampoline from the workq context; because we don't have a
+	 * generic workq wrapper yet.
+	 *
+	 * @param arg		Instance pointer for the driver that is polling.
+	 */
+	static void		cycle_trampoline(void *arg);
+
+	/**
+	 * Write a register.
+	 *
+	 * @param reg		The register to write.
+	 * @param val		The value to write.
+	 * @return		OK on write success.
+	 */
+	int			write_reg(uint8_t reg, uint8_t val);
+
+	/**
+	 * Read a register.
+	 *
+	 * @param reg		The register to read.
+	 * @param val		The value read.
+	 * @return		OK on read success.
+	 */
+	int			read_reg(uint8_t reg, uint8_t &val);
+
+	/**
+	 * Issue a measurement command.
+	 *
+	 * @return		OK if the measurement command was successful.
+	 */
+	int			measure();
+
+	/**
+	 * Collect the result of the most recent measurement.
+	 */
+	int			collect();
+
+	/**
+	 * Convert a big-endian signed 16-bit value to a float.
+	 *
+	 * @param in		A signed 16-bit big-endian value.
+	 * @return		The floating-point representation of the value.
+	 */
+	float			meas_to_float(uint8_t in[2]);
+
+};
+
+/* helper macro for handling report buffer indices */
+#define INCREMENT(_x, _lim)	do { _x++; if (_x >= _lim) _x = 0; } while(0)
+
+/*
+ * Driver 'main' command.
+ */
+extern "C" __EXPORT int hmc5883_main(int argc, char *argv[]);
+
+
+HMC5883::HMC5883(int bus) :
+	I2C("HMC5883", MAG_DEVICE_PATH, bus, HMC5883L_ADDRESS, 400000),
+	_measure_ticks(0),
+	_num_reports(0),
+	_next_report(0),
+	_oldest_report(0),
+	_reports(nullptr),
+	_reads(0),
+	_measure_errors(0),
+	_read_errors(0),
+	_buf_overflows(0),
+	_sample_perf(perf_alloc(PC_ELAPSED, "hmc5883_read"))
+{
+	// enable debug() calls
+	_debug_enabled = true;
+
+	// work_cancel in the dtor will explode if we don't do this...
+	_work.worker = nullptr;
+}
+
+HMC5883::~HMC5883()
+{
+	/* make sure we are truly inactive */
+	stop();
+
+	/* free any existing reports */
+	if (_reports != nullptr)
+		delete[] _reports;
+}
+
+int
+HMC5883::init()
+{
+	int ret = ERROR;
+
+	/* do I2C init (and probe) first */
+	ret = I2C::init();
+	if (ret != OK)
+		goto out;
+
+	/* assuming we're good, advertise the object */
+	struct mag_report m;
+
+	/* if this fails (e.g. no object in the system) that's OK */
+	memset(&m, 0, sizeof(m));
+	_mag_topic = orb_advertise(ORB_ID(sensor_mag), &m);
+
+	if (_mag_topic < 0) {
+		debug("failed to create sensor_baro object");
+	} else {
+		ret = 0;
+	}
+out:
+	return ret;
+}
+
+int
+HMC5883::open_first(struct file *filp)
+{
+	/* reset to manual-poll mode */
+	_measure_ticks = 0;
+
+	/* allocate basic report buffers */
+	_num_reports = 2;
+	_reports = new struct mag_report[_num_reports];
+	_oldest_report = _next_report = 0;
+
+	return OK;
+}
+
+int
+HMC5883::close_last(struct file *filp)
+{
+	/* stop measurement */
+	stop();
+
+	/* free report buffers */
+	if (_reports != nullptr) {
+		delete[] _reports;
+		_num_reports = 0;
+	}
+
+	_measure_ticks = 0;
+
+	return OK;
+}
+
+int
+HMC5883::probe()
+{
+	uint8_t	cmd[] = { ADDR_STATUS };
+	uint8_t data[3];
+
+	if (read_reg(ADDR_ID_A, data[0]) ||
+	    read_reg(ADDR_ID_B, data[1]) ||
+	    read_reg(ADDR_ID_C, data[2]))
+		debug("read_reg fail");
+
+	if ((data[0] != ID_A_WHO_AM_I) || 
+	    (data[1] != ID_B_WHO_AM_I) ||
+	    (data[2] != ID_C_WHO_AM_I)) {
+		debug("ID byte mismatch (%02x,%02x,%02x)", data[0], data[1], data[2]);
+		return -EIO;
+	}
+
+	return OK;
+}
+
+ssize_t
+HMC5883::read(struct file *filp, char *buffer, size_t buflen)
+{
+	unsigned count = buflen / sizeof(struct mag_report);
+	int ret = 0;
+
+	/* buffer must be large enough */
+	if (count < 1)
+		return -ENOSPC;
+
+	/* if automatic measurement is enabled */
+	if (_measure_ticks > 0) {
+
+		/*
+		 * While there is space in the caller's buffer, and reports, copy them.
+		 * Note that we may be pre-empted by the workq thread while we are doing this;
+		 * we are careful to avoid racing with them.
+		 */
+		while (count--) {
+			if (_oldest_report != _next_report) {
+				memcpy(buffer, _reports + _oldest_report, sizeof(*_reports));
+				ret += sizeof(_reports[0]);
+				INCREMENT(_oldest_report, _num_reports);
+			}
+		}
+
+		_reads++;
+
+		/* if there was no data, warn the caller */
+		return ret ? ret : -EAGAIN;
+	}
+
+	/* manual measurement - run one conversion */
+	/* XXX really it'd be nice to lock against other readers here */
+	do {
+		_oldest_report = _next_report = 0;
+
+		/* trigger a measurement */
+		if (OK != measure()) {
+			ret = -EIO;
+			break;
+		}
+
+		/* wait for it to complete */
+		usleep(HMC5883_CONVERSION_INTERVAL);
+
+		/* run the collection phase */
+		if (OK != collect()) {
+			ret = -EIO;
+			break;
+		}
+
+		/* state machine will have generated a report, copy it out */
+		memcpy(buffer, _reports, sizeof(*_reports));
+		ret = sizeof(*_reports);
+		_reads++;
+
+	} while (0);
+
+	return ret;
+}
+
+int
+HMC5883::ioctl(struct file *filp, int cmd, unsigned long arg)
+{
+	switch (cmd) {
+
+	case MAGIOCSPOLLRATE: {
+			switch (arg) {
+
+				/* switching to manual polling */
+			case MAG_POLLRATE_MANUAL:
+				stop();
+				_measure_ticks = 0;
+				return OK;
+
+				/* external signalling not supported */
+			case MAG_POLLRATE_EXTERNAL:
+
+				/* zero would be bad */
+			case 0:
+				return -EINVAL;
+
+				/* adjust to a legal polling interval in Hz */
+			default: {
+					/* do we need to start internal polling? */
+					bool want_start = (_measure_ticks == 0);
+
+					/* convert hz to tick interval via microseconds */
+					unsigned ticks = USEC2TICK(1000000 / arg);
+
+					/* check against maximum rate */
+					if (ticks < USEC2TICK(HMC5883_CONVERSION_INTERVAL))
+						return -EINVAL;
+
+					/* update interval for next measurement */
+					_measure_ticks = ticks;
+
+					/* if we need to start the poll state machine, do it */
+					if (want_start)
+						start();
+
+					return OK;
+				}
+			}
+		}
+
+	case MAGIOCSQUEUEDEPTH: {
+			/* lower bound is mandatory, upper bound is a sanity check */
+			if ((arg < 2) || (arg > 100))
+				return -EINVAL;
+
+			/* allocate new buffer */
+			struct mag_report *buf = new struct mag_report[arg];
+
+			if (nullptr == buf)
+				return -ENOMEM;
+
+			/* reset the measurement state machine with the new buffer, free the old */
+			stop();
+			delete[] _reports;
+			_num_reports = arg;
+			_reports = buf;
+			start();
+
+			return OK;
+		}
+
+	case MAGIOCSREPORTFORMAT:
+		return -EINVAL;
+
+	default:
+		/* give it to the superclass */
+		return I2C::ioctl(filp, cmd, arg);
+	}
+}
+
+void
+HMC5883::start()
+{
+	/* make sure we are stopped first */
+	stop();
+
+	/* reset the report ring and state machine */
+	_collect_phase = false;
+	_oldest_report = _next_report = 0;
+
+	/* schedule a cycle to start things */
+	work_queue(&_work, (worker_t)&HMC5883::cycle_trampoline, this, 1);
+}
+
+void
+HMC5883::stop()
+{
+	work_cancel(&_work);
+}
+
+void
+HMC5883::cycle_trampoline(void *arg)
+{
+	HMC5883 *dev = (HMC5883 *)arg;
+
+	dev->cycle();
+}
+
+void
+HMC5883::cycle()
+{
+	/* collection phase? */
+	if (_collect_phase) {
+
+		/* perform collection */
+		if (OK != collect()) {
+			log("FATAL collection error - restarting\n");
+			start();
+			return;
+		}
+
+		/* next phase is measurement */
+		_collect_phase = false;
+
+		/*
+		 * Is there a collect->measure gap?
+		 */
+		if (_measure_ticks > USEC2TICK(HMC5883_CONVERSION_INTERVAL)) {
+
+			/* schedule a fresh cycle call when we are ready to measure again */
+			work_queue(&_work,
+				   (worker_t)&HMC5883::cycle_trampoline,
+				   this,
+				   _measure_ticks - USEC2TICK(HMC5883_CONVERSION_INTERVAL));
+
+			return;
+		}
+	}
+
+	/* measurement phase */
+	if (OK != measure()) {
+		log("FATAL measure error - restarting\n");
+		start();
+	}
+
+	/* next phase is collection */
+	_collect_phase = true;
+
+	/* schedule a fresh cycle call when the measurement is done */
+	work_queue(&_work,
+		   (worker_t)&HMC5883::cycle_trampoline,
+		   this,
+		   USEC2TICK(HMC5883_CONVERSION_INTERVAL));
+}
+
+int
+HMC5883::measure()
+{
+	int ret;
+
+	/*
+	 * Send the command to begin a measurement.
+	 */
+	ret = write_reg(ADDR_MODE, MODE_REG_SINGLE_MODE);
+	if (OK != ret)
+		_measure_errors++;
+
+	return ret;
+}
+
+int
+HMC5883::collect()
+{
+#pragma pack(push, 1)
+	struct { /* status register and data as read back from the device */
+		uint8_t		x[2];
+		uint8_t		z[2];
+		uint8_t		y[2];
+		uint8_t		status;
+	}	hmc_report;
+#pragma pack(pop)
+	int	ret = -EIO;
+	uint8_t	cmd[1];
+
+	perf_begin(_sample_perf);
+
+	/* this should be fairly close to the end of the measurement, so the best approximation of the time */
+	_reports[_next_report].timestamp = hrt_absolute_time();
+
+	/* get measurements from the device */
+	cmd[0] = ADDR_DATA_OUT_X_MSB;
+	ret = transfer(&cmd[0], 1, &hmc_report.x[0], sizeof(hmc_report));
+	if (ret != OK) {
+		debug("data/status read error");
+		goto out;
+	}
+
+	/* XXX check status? */
+
+	/* XXX scaling */
+	_reports[_next_report].x = meas_to_float(hmc_report.x);
+	_reports[_next_report].y = meas_to_float(hmc_report.y);
+	_reports[_next_report].z = meas_to_float(hmc_report.z);
+
+	/* publish it */
+	orb_publish(ORB_ID(sensor_mag), _mag_topic, &_reports[_next_report]);
+
+	/* post a report to the ring - note, not locked */
+	INCREMENT(_next_report, _num_reports);
+
+	/* if we are running up against the oldest report, toss it */
+	if (_next_report == _oldest_report) {
+		_buf_overflows++;
+		INCREMENT(_oldest_report, _num_reports);
+	}
+
+	/* notify anyone waiting for data */
+	poll_notify(POLLIN);
+
+	ret = OK;
+
+out:
+	perf_end(_sample_perf);
+	return ret;
+}
+
+int
+HMC5883::write_reg(uint8_t reg, uint8_t val)
+{
+	uint8_t cmd[] = { reg, val };
+
+	return transfer(&cmd[0], 2, nullptr, 0);
+}
+
+int
+HMC5883::read_reg(uint8_t reg, uint8_t &val)
+{
+	return transfer(&reg, 1, &val, 1);
+}
+
+float
+HMC5883::meas_to_float(uint8_t in[2])
+{
+	union {
+		uint8_t	b[2];
+		int16_t	w;
+	} u;
+
+	u.b[0] = in[1];
+	u.b[1] = in[0];
+
+	return (float) u.w;
+}
+
+void
+HMC5883::print_info()
+{
+	printf("reads:          %u\n", _reads);
+	printf("measure errors: %u\n", _measure_errors);
+	printf("read errors:    %u\n", _read_errors);
+	printf("read overflows: %u\n", _buf_overflows);
+	printf("poll interval:  %u ticks\n", _measure_ticks);
+	printf("report queue:   %u (%u/%u @ %p)\n",
+	       _num_reports, _oldest_report, _next_report, _reports);
+}
+
+/**
+ * Local functions in support of the shell command.
+ */
+namespace
+{
+
+/* oddly, ERROR is not defined for c++ */
+#ifdef ERROR
+# undef ERROR
+#endif
+const int ERROR = -1;
+
+HMC5883	*g_dev;
+
+/*
+ * XXX this should just be part of the generic sensors test...
+ */
+
+
+int
+test_fail(const char *fmt, ...)
+{
+	va_list ap;
+
+	fprintf(stderr, "FAIL: ");
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	fprintf(stderr, "\n");
+	fflush(stderr);
+	return ERROR;
+}
+
+int
+test_note(const char *fmt, ...)
+{
+	va_list ap;
+
+	fprintf(stderr, "note: ");
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	fprintf(stderr, "\n");
+	fflush(stderr);
+	return OK;
+}
+
+/**
+ * Perform some basic functional tests on the driver;
+ * make sure we can collect data from the sensor in polled
+ * and automatic modes.
+ *
+ * @param fd		An open file descriptor on the driver.
+ */
+int
+test(int fd)
+{
+	struct mag_report report;
+	ssize_t sz;
+	int ret;
+
+
+	/* do a simple demand read */
+	sz = read(fd, &report, sizeof(report));
+
+	if (sz != sizeof(report))
+		return test_fail("immediate read failed: %d", errno);
+
+	test_note("single read");
+	test_note("measurement: %.6f  %.6f  %.6f", report.x, report.y, report.z);
+	test_note("time:        %lld", report.timestamp);
+	usleep(1000000);
+
+	/* set the queue depth to 10 */
+	if (OK != ioctl(fd, MAGIOCSQUEUEDEPTH, 10))
+		return test_fail("failed to set queue depth");
+
+	/* start the sensor polling at 2Hz */
+	if (OK != ioctl(fd, MAGIOCSPOLLRATE, 2))
+		return test_fail("failed to set 2Hz poll rate");
+
+	/* read the sensor 5x and report each value */
+	for (unsigned i = 0; i < 5; i++) {
+		struct pollfd fds;
+
+		/* wait for data to be ready */
+		fds.fd = fd;
+		fds.events = POLLIN;
+		ret = poll(&fds, 1, 2000);
+
+		if (ret != 1)
+			return test_fail("timed out waiting for sensor data");
+
+		/* now go get it */
+		sz = read(fd, &report, sizeof(report));
+
+		if (sz != sizeof(report))
+			return test_fail("periodic read failed: %d", errno);
+
+		test_note("periodic read %u", i);
+		test_note("measurement: %.6f  %.6f  %.6f", report.x, report.y, report.z);
+		test_note("time:        %lld", report.timestamp);
+	}
+
+	return test_note("PASS");
+	return OK;
+}
+
+int
+info()
+{
+	if (g_dev == nullptr) {
+		fprintf(stderr, "HMC5883: driver not running\n");
+		return -ENOENT;
+	}
+
+	printf("state @ %p\n", g_dev);
+	g_dev->print_info();
+
+	return OK;
+}
+
+
+} // namespace
+
+int
+hmc5883_main(int argc, char *argv[])
+{
+	/*
+	 * Start/load the driver.
+	 *
+	 * XXX it would be nice to have a wrapper for this...
+	 */
+	if (!strcmp(argv[1], "start")) {
+
+		if (g_dev != nullptr) {
+			fprintf(stderr, "HMC5883: already loaded\n");
+			return -EBUSY;
+		}
+
+		/* create the driver */
+		/* XXX HORRIBLE hack - the bus number should not come from here */
+		g_dev = new HMC5883(2);
+
+		if (g_dev == nullptr) {
+			fprintf(stderr, "HMC5883: driver alloc failed\n");
+			return -ENOMEM;
+		}
+
+		if (OK != g_dev->init()) {
+			fprintf(stderr, "HMC5883: driver init failed\n");
+			usleep(100000);
+			delete g_dev;
+			g_dev = nullptr;
+			return -EIO;
+		}
+
+		return OK;
+	}
+
+	/*
+	 * Test the driver/device.
+	 */
+	if (!strcmp(argv[1], "test")) {
+		int fd, ret;
+
+		fd = open(MAG_DEVICE_PATH, O_RDONLY);
+
+		if (fd < 0)
+			return test_fail("driver open failed: %d", errno);
+
+		ret = test(fd);
+		close(fd);
+		return ret;
+	}
+
+	/*
+	 * Print driver information.
+	 */
+	if (!strcmp(argv[1], "info"))
+		return info();
+
+	fprintf(stderr, "unrecognised command, try 'start', 'test' or 'info'\n");
+	return -EINVAL;
+}