diff options
author | Julian Oes <julian@oes.ch> | 2013-07-08 10:31:32 +0200 |
---|---|---|
committer | Julian Oes <julian@oes.ch> | 2013-07-08 10:31:32 +0200 |
commit | 88389ea2554c6f56a4fdd86cdd86a1e7b6affc21 (patch) | |
tree | 3ef98ded43e5f3a2cdc30a836a3a7329fe5757bb /apps/examples/README.txt | |
parent | 76346bfe19c816491a6982abfa10f48cd9d258f6 (diff) | |
parent | cf2dbdf9a1ae06c7d0e0a7963916a3709a1bc075 (diff) | |
download | px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.tar.gz px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.tar.bz2 px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.zip |
Merge branch 'master' into new_state_machine
compiling again
Conflicts:
src/modules/fixedwing_att_control/fixedwing_att_control_att.c
src/modules/fixedwing_att_control/fixedwing_att_control_rate.c
src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c
src/modules/mavlink/orb_listener.c
src/modules/multirotor_att_control/multirotor_attitude_control.c
src/modules/multirotor_att_control/multirotor_rate_control.c
src/modules/systemlib/pid/pid.c
src/modules/systemlib/pid/pid.h
src/modules/uORB/objects_common.cpp
Diffstat (limited to 'apps/examples/README.txt')
-rw-r--r-- | apps/examples/README.txt | 1928 |
1 files changed, 0 insertions, 1928 deletions
diff --git a/apps/examples/README.txt b/apps/examples/README.txt deleted file mode 100644 index 03d43f1a0..000000000 --- a/apps/examples/README.txt +++ /dev/null @@ -1,1928 +0,0 @@ -examples -^^^^^^^^ - - appconfig and CONFIG_APPS - - The examples directory contains several sample applications that - can be linked with NuttX. The specific example is selected in the - configs/<board-name>/appconfig file via the CONFIGURED_APPS setting. - This setting provides the path to the directory containing the - application Makefile (this path is a relative to the apps/ top- - level directory). For example, - - CONFIGURE_APPS += examples/ostest - - Selects the examples/ostest example. - - Built-In functions - - Some of the examples may be built as "built-in" functions that - can be executed at run time (rather than as NuttX "main" programs). - These "built-in" examples can be also be executed from the NuttShell - (NSH) command line. In order to configure these built-in NSH - functions, you have to set up the following: - - - CONFIG_NSH_BUILTIN_APPS - Enable support for external registered, - "named" applications that can be executed from the NSH - command line (see apps/README.txt for more information). - - CONFIG_EXAMPLES_XYZ_BUILTIN -- Build the XYZ example as a "built-in" - that can be executed from the NSH command line (where XYZ is - the specific example. See the following for examples that - support this option). - -examples/adc -^^^^^^^^^^^^ - - A mindlessly simple test of an ADC devices. It simply reads from the - ADC device and dumps the data to the console forever. - - This test depends on these specific ADC/NSH configurations settings (your - specific ADC settings might require additional settings). - - CONFIG_ADC - Enabled ADC support - CONFIG_NSH_BUILTIN_APPS - Build the ADC test as an NSH built-in function. - Default: Built as a standalone problem - - Specific configuration options for this example include: - - CONFIG_EXAMPLES_ADC_DEVPATH - The default path to the ADC device. Default: /dev/adc0 - CONFIG_EXAMPLES_ADC_NSAMPLES - If CONFIG_NSH_BUILTIN_APPS - is defined, then the number of samples is provided on the command line - and this value is ignored. Otherwise, this number of samples is - collected and the program terminates. Default: Samples are collected - indefinitely. - CONFIG_EXAMPLES_ADC_GROUPSIZE - The number of samples to read at once. - Default: 4 - -examples/buttons -^^^^^^^^^^^^^^^^ - - This is a simple configuration that may be used to test the board- - specific button interfaces. Configuration options: - - CONFIG_ARCH_BUTTONS - Must be defined for button support - CONFIG_EXAMPLES_BUTTONS_MIN - Lowest button number (MIN=0) - CONFIG_EXAMPLES_BUTTONS_MAX - Highest button number (MAX=7) - - CONFIG_ARCH_IRQBUTTONS - Must be defined for interrupting button support - CONFIG_EXAMPLES_IRQBUTTONS_MIN - Lowest interrupting button number (MIN=0) - CONFIG_EXAMPLES_IRQBUTTONS_MAX - Highest interrupting button number (MAX=7) - - Name strings for buttons: - - CONFIG_EXAMPLES_BUTTONS_NAME0, CONFIG_EXAMPLES_BUTTONS_NAME1, - CONFIG_EXAMPLES_BUTTONS_NAME2, CONFIG_EXAMPLES_BUTTONS_NAME3, - CONFIG_EXAMPLES_BUTTONS_NAME4, CONFIG_EXAMPLES_BUTTONS_NAME5, - CONFIG_EXAMPLES_BUTTONS_NAME6, CONFIG_EXAMPLES_BUTTONS_NAME7, - - Additional architecture-/board- specific configuration settings may also - be required. - - NOTE: This test exercises internal button driver interfaces. As such, it - relies on internal OS interfaces that are not normally available to a - user-space program. As a result, this example cannot be used if a - NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL). - -examples/can -^^^^^^^^^^^^ - - If the CAN device is configured in loopback mode, then this example can - be used to test the CAN device in loop back mode. It simple sinces a - sequence of CAN messages and verifies that those messages are returned - exactly as sent. - - This test depends on these specific CAN/NSH configurations settings (your - specific CAN settings might require additional settings). - - CONFIG_CAN - Enables CAN support. - CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback - mode for testing. The STM32 CAN driver does support loopback mode. - CONFIG_NSH_BUILTIN_APPS - Build the CAN test as an NSH built-in function. - Default: Built as a standalone problem - - Specific configuration options for this example include: - - CONFIG_EXAMPLES_CAN_DEVPATH - The path to the CAN device. Default: /dev/can0 - CONFIG_EXAMPLES_CAN_NMSGS - If CONFIG_NSH_BUILTIN_APPS - is defined, then the number of loops is provided on the command line - and this value is ignored. Otherwise, this number of CAN message is - collected and the program terminates. Default: If built as an NSH - built-in, the default is 32. Otherwise messages are sent and received - indefinitely. - - The default behavior assumes loopback mode. Messages are sent, then read - and verified. The behavior can be altered for other kinds of testing where - the test only sends or received (but does not verify) can messages. - - CONFIG_EXAMPLES_CAN_READONLY - Only receive messages - CONFIG_EXAMPLES_CAN_WRITEONLY - Only send messages - -examples/cdcacm -^^^^^^^^^^^^^^^ - - This very simple example shows how a USB CDC/ACM serial can be dynamically - connected and disconnected from a host. This example can only be used as - an NSH built-int command. If built-in, then two new NSH commands will be - supported: - - 1. sercon - Connect the CDC/ACM serial device - 2. serdis - Disconnect the CDC/ACM serial device - - Configuration prequisites (not complete): - - CONFIG_USBDEV=y : USB device support must be enabled - CONFIG_CDCACM=y : The CDC/ACM driver must be built - CONFIG_NSH_BUILTIN_APPS : NSH built-in application support must be enabled - - Configuration options specific to this example: - - CONFIG_EXAMPLES_CDCACM_DEVMINOR : The minor number of the CDC/ACM device. - : i.e., the 'x' in /dev/ttyACMx - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB, or - CONFIG_USBDEV_TRACE), then the example code will also initialize the USB trace - output. The amount of trace output can be controlled using: - - CONFIG_EXAMPLES_CDCACM_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_CDCACM_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS - Show interrupt-related events. - - Note: This example is only enables or disable USB CDC/ACM via the NSH - 'sercon' and 'serdis' command. It will enable and disable tracing per - the settings before enabling and after disabling the CDC/ACM device. It - will not, however, monitor buffered trace data in the interim. If - CONFIG_USBDEV_TRACE is defined (and the debug options are not), other - application logic will need to monitor the buffered trace data. - -examples/composite -^^^^^^^^^^^^^^^^^^ - - This example test a USB composite device. The only supported composite is - CDC/ACM serial with a USB mass storage device. - - Required overall configuration: - - CONFIG_USBDEV=y - USB device support - CONFIG_USBDEV_COMPOSITE=y - USB composite device support - CONFIG_COMPOSITE_IAD=y - Interface associate descriptor needed - - CONFIG_CDCACM=y - USB CDC/ACM serial device support - CONFIG_CDCACM_COMPOSITE=y - USB CDC/ACM serial composite device support - CONFIG_CDCACM_IFNOBASE=0 - CDC/ACM interfaces start with number 0 - CONFIG_CDCACM_STRBASE=4 - Base of string numbers (not really needed) - CONFIG_CDCACM_EPINTIN=1 - Endpoint numbers must be unique - CONFIG_CDCACM_EPBULKIN=2 - CONFIG_CDCACM_EPBULKOUT=3 - - CONFIG_USBMSC - USB mass storage device support - CONFIG_USBMSC_COMPOSITE=y - USB mass storage composite device support - CONFIG_USBMSC_IFNOBASE=2 - USB mass storage interfaces start with number 2 - CONFIG_USBMSC_STRBASE=4 - Base of string numbers (needed) - CONFIG_USBMSC_EPBULKOUT=4 - Endpoint numbers must be unique - CONFIG_USBMSC_EPBULKIN=5 - - CONFIG_NSH_BUILTIN_APPS - This example can be built as two NSH "built-in" commands if this option - is selected: 'conn' will connect the USB composite device; 'msdis' - will disconnect the USB composite device. - - Configuration options unique to this example: - - CONFIG_EXAMPLES_COMPOSITE_DEBUGMM - Enables some debug tests to check for memory usage and memory leaks. - - CONFIG_EXAMPLES_COMPOSITE_NLUNS - Defines the number of logical units (LUNs) exported by the USB storage - driver. Each LUN corresponds to one exported block driver (or partition - of a block driver). May be 1, 2, or 3. Default is 1. - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR1 - The minor device number of the block driver for the first LUN. For - example, N in /dev/mmcsdN. Used for registering the block driver. Default - is zero. - CONFIG_EXAMPLES_COMPOSITE_DEVPATH1 - The full path to the registered block driver. Default is "/dev/mmcsd0" - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR2 and CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_COMPOSITE_NLUNS - is 2 or 3. No defaults. - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR3 and CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_COMPOSITE_NLUNS - is 3. No defaults. - CONFIG_EXAMPLES_COMPOSITE_BUFLEN. Default 256. - - CONFIG_EXAMPLES_COMPOSITE_TTYUSB - The minor number of the USB serial device. - Default is zero (corresponding to /dev/ttyUSB0 or /dev/ttyACM0). Default is zero. - CCONFIG_EXAMPLES_COMPOSITE_SERDEV - The string corresponding to - CONFIG_EXAMPLES_COMPOSITE_TTYUSB. The default is "/dev/ttyUSB0" (for the PL2303 - emulation) or "/dev/ttyACM0" (for the CDC/ACM serial device). - CONFIG_EXAMPLES_COMPOSITE_BUFSIZE - The size of the serial I/O buffer in - bytes. Default 256 bytes. - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then - the example code will also manage the USB trace output. The amount of trace output - can be controlled using: - - CONFIG_EXAMPLES_COMPOSITE_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_COMPOSITE_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_COMPOSITE_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_COMPOSITE_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_COMPOSITE_TRACEINTERRUPTS - Show interrupt-related events. - -examples/cxxtest -^^^^^^^^^^^^^^^^ - - This is a test of the C++ standard library. At present a port of the uClibc++ - C++ library is available. Due to licensinging issues, the uClibc++ C++ library - is not included in the NuttX source tree by default, but must be installed - (see misc/uClibc++/README.txt for installation). - - The NuttX setting that are required include: - - CONFIG_HAVE_CXX=y - CONFIG_HAVE_CXXINITIALIZE=y - CONFIG_UCLIBCXX=y - - Additional uClibc++ settings may be required in your build environment. - - The uClibc++ test includes simple test of: - - - iostreams, - - STL, - - RTTI, and - - Exceptions - -examples/dhcpd -^^^^^^^^^^^^^^ - - This examples builds a tiny DCHP server for the target system. - - NOTE: For test purposes, this example can be built as a - host-based DHCPD server. This can be built as follows: - - cd examples/dhcpd - make -f Makefile.host TOPDIR=<nuttx-directory> - - NuttX configuration settings: - - CONFIG_NET=y - Of course - CONFIG_NSOCKET_DESCRIPTORS - And, of course, you must allocate some - socket descriptors. - CONFIG_NET_UDP=y - UDP support is required for DHCP - (as well as various other UDP-related - configuration settings) - CONFIG_NET_BROADCAST=y - UDP broadcast support is needed. - - CONFIG_EXAMPLES_DHCPD_NOMAC - (May be defined to use software assigned MAC) - CONFIG_EXAMPLES_DHCPD_IPADDR - Target IP address - CONFIG_EXAMPLES_DHCPD_DRIPADDR - Default router IP addess - CONFIG_EXAMPLES_DHCPD_NETMASK - Network mask - - See also CONFIG_NETUTILS_DHCPD_* settings described elsewhere - and used in netutils/dhcpd/dhcpd.c. These settings are required - to described the behavior of the daemon. - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - -examples/discover -^^^^^^^^^^^^^^^^^ - - This example exercises netutils/discover utility. This example initializes - and starts the UDP discover daemon. This daemon is useful for discovering - devices in local networks, especially with DHCP configured devices. It - listens for UDP broadcasts which also can include a device class so that - groups of devices can be discovered. It is also possible to address all - classes with a kind of broadcast discover. - - This example will automatically be built as an NSH built-in if - CONFIG_NSH_BUILTIN_APPS is selected. Otherwise, it will be a standalone - program with entry point "discover_main". - - NuttX configuration settings: - - CONFIG_EXAMPLES_DISCOVER_DHCPC - DHCP Client - CONFIG_EXAMPLES_DISCOVER_NOMAC - Use canned MAC address - CONFIG_EXAMPLES_DISCOVER_IPADDR - Target IP address - CONFIG_EXAMPLES_DISCOVER_DRIPADDR - Router IP address - CONFIG_EXAMPLES_DISCOVER_NETMASK - Network Mask - -examples/elf -^^^^^^^^^^^^ - - This example builds a small ELF loader test case. This includes several - test programs under examples/elf tests. These tests are build using - the relocatable ELF format and installed in a ROMFS file system. At run time, - each program in the ROMFS file system is executed. Requires CONFIG_ELF. - Other configuration options: - - CONFIG_EXAMPLES_ELF_DEVMINOR - The minor device number of the ROMFS block - driver. For example, the N in /dev/ramN. Used for registering the RAM - block driver that will hold the ROMFS file system containing the ELF - executables to be tested. Default: 0 - - CONFIG_EXAMPLES_ELF_DEVPATH - The path to the ROMFS block driver device. This - must match EXAMPLES_ELF_DEVMINOR. Used for registering the RAM block driver - that will hold the ROMFS file system containing the ELF executables to be - tested. Default: "/dev/ram0" - - NOTES: - - 1. CFLAGS should be provided in CELFFLAGS. RAM and FLASH memory regions - may require long allcs. For ARM, this might be: - - CELFFLAGS = $(CFLAGS) -mlong-calls - - Similarly for C++ flags which must be provided in CXXELFFLAGS. - - 2. Your top-level nuttx/Make.defs file must also include an approproate definition, - LDELFFLAGS, to generate a relocatable ELF object. With GNU LD, this should - include '-r' and '-e main' (or _main on some platforms). - - LDELFFLAGS = -r -e main - - If you use GCC to link, you make also need to include '-nostdlib' or - '-nostartfiles' and '-nodefaultlibs'. - - 3. This example also requires genromfs. genromfs can be build as part of the - nuttx toolchain. Or can built from the genromfs sources that can be found - at misc/tools/genromfs-0.5.2.tar.gz. In any event, the PATH variable must - include the path to the genromfs executable. - - 4. ELF size: The ELF files in this example are, be default, quite large - because they include a lot of "build garbage". You can greatly reduce the - size of the ELF binaries are using the 'objcopy --strip-unneeded' command to - remove un-necessary information from the ELF files. - - 5. Simulator. You cannot use this example with the the NuttX simulator on - Cygwin. That is because the Cygwin GCC does not generate ELF file but - rather some Windows-native binary format. - - If you really want to do this, you can create a NuttX x86 buildroot toolchain - and use that be build the ELF executables for the ROMFS file system. - - 6. Linker scripts. You might also want to use a linker scripts to combine - sections better. An example linker script is at nuttx/binfmt/libelf/gnu-elf.ld. - That example might have to be tuned for your particular linker output to - position additional sections correctly. The GNU LD LDELFFLAGS then might - be: - - LDELFFLAGS = -r -e main -T$(TOPDIR)/binfmt/libelf/gnu-elf.ld - -examples/ftpc -^^^^^^^^^^^^^ - - This is a simple FTP client shell used to exercise the capabilities - of the FTPC library (apps/netutils/ftpc). This example is configured - to that it will only work as a "built-in" program that can be run from - NSH when CONFIG_NSH_BUILTIN_APPS is defined. - - From NSH, the startup command sequence is as follows. This is only - an example, your configration could have different mass storage devices, - mount paths, and FTP directories: - - nsh> mount -t vfat /dev/mmcsd0 /tmp # Mount the SD card at /tmp - nsh> cd /tmp # cd into the /tmp directory - nsh> ftpc xx.xx.xx.xx[:pp] # Start the FTP client - nfc> login <name> <password> # Log into the FTP server - nfc> help # See a list of FTP commands - - where xx.xx.xx.xx is the IP address of the FTP server and pp is an - optional port number. - - NOTE: By default, FTPC uses readline to get data from stdin. So your - appconfig file must have the following build path: - - CONFIGURED_APPS += system/readline - - NOTE: If you use the ftpc task over a telnet NSH connection, then you - should set the following configuration item: - - CONFIG_EXAMPLES_FTPC_FGETS=y - - By default, the FTPC client will use readline() to get characters from - the console. Readline includes and command-line editor and echos - characters received in stdin back through stdout. Neither of these - behaviors are desire-able if Telnet is used. - - You may also want to define the following in your configuration file. - Otherwise, you will have not feeback about what is going on: - - CONFIG_DEBUG=y - CONFIG_DEBUG_VERBOSE=y - CONFIG_DEBUG_FTPC=y - -examples/ftpd -^^^^^^^^^^^^^^ - - This example exercises the FTPD daemon at apps/netuils/ftpd. Below are - configurations specific to the FTPD example (the FTPD daemon itself may - require other configuration options as well). - - CONFIG_EXAMPLES_FTPD_PRIO - Priority of the FTP daemon. - Default: SCHED_PRIORITY_DEFAULT - CONFIG_EXAMPLES_FTPD_STACKSIZE - Stack size allocated for the - FTP daemon. Default: 2048 - CONFIG_EXAMPLES_FTPD_NONETINIT - Define to suppress configuration of the - network by apps/examples/ftpd. You would need to suppress network - configuration if the network is configuration prior to running the - example. - - NSH always initializes the network so if CONFIG_NSH_BUILTIN_APPS is - defined, so is CONFIG_EXAMPLES_FTPD_NONETINIT (se it does not explicitly - need to be defined in that case): - - CONFIG_NSH_BUILTIN_APPS - Build the FTPD daemon example test as an - NSH built-in function. By default the FTPD daemon will be built - as a standalone application. - - If CONFIG_EXAMPLES_FTPD_NONETINIT is not defined, then the following may - be specified to customized the network configuration: - - CONFIG_EXAMPLES_FTPD_NOMAC - If the hardware has no MAC address of its - own, define this =y to provide a bogus address for testing. - CONFIG_EXAMPLES_FTPD_IPADDR - The target IP address. Default 10.0.0.2 - CONFIG_EXAMPLES_FTPD_DRIPADDR - The default router address. Default - 10.0.0.1 - CONFIG_EXAMPLES_FTPD_NETMASK - The network mask. Default: 255.255.255.0 - - Other required configuration settings: Of course TCP networking support - is required. But here are a couple that are less obvious: - - CONFIG_DISABLE_PTHREAD - pthread support is required - CONFIG_DISABLE_POLL - poll() support is required - - Other FTPD configuration options thay may be of interest: - - CONFIG_FTPD_VENDORID - The vendor name to use in FTP communications. - Default: "NuttX" - CONFIG_FTPD_SERVERID - The server name to use in FTP communications. - Default: "NuttX FTP Server" - CONFIG_FTPD_CMDBUFFERSIZE - The maximum size of one command. Default: - 512 bytes. - CONFIG_FTPD_DATABUFFERSIZE - The size of the I/O buffer for data - transfers. Default: 2048 bytes. - CONFIG_FTPD_WORKERSTACKSIZE - The stacksize to allocate for each - FTP daemon worker thread. Default: 2048 bytes. - - The appconfig file (apps/.config) should include: - - CONFIGURED_APPS += examples/ftpd - CONFIGURED_APPS += netutils/uiplib - CONFIGURED_APPS += netutils/ftpd - -examples/hello -^^^^^^^^^^^^^^ - - This is the mandatory, "Hello, World!!" example. It is little more - than examples/null with a single printf statement. Really useful only - for bringing up new NuttX architectures. - - * CONFIG_NSH_BUILTIN_APPS - Build the "Hello, World" example as an NSH built-in application. - -examples/helloxx -^^^^^^^^^^^^^^^^ - - This is C++ version of the "Hello, World!!" example. It is intended - only to verify that the C++ compiler is functional, that basic C++ - library suupport is available, and that class are instantiated - correctly. - - NuttX configuration prerequisites: - - CONFIG_HAVE_CXX -- Enable C++ Support - - Optional NuttX configuration settings: - - CONFIG_HAVE_CXXINITIALIZE -- Enable support for static constructors - (may not be available on all platforms). - - NuttX configuration settings specific to this examp;le: - - CONFIG_EXAMPLES_HELLOXX_BUILTIN -- Build the helloxx example as a - "built-in" that can be executed from the NSH command line. - CONFIG_EXAMPLES_HELLOXX_NOSTACKCONST - Set if the system does not - support construction of objects on the stack. - - Also needed: - - CONFIG_HAVE_CXX=y - - And you may have to tinker with the following to get libxx to compile - properly: - - CONFIG_CXX_NEWLONG=y or =n - - The argument of the 'new' operators should take a type of size_t. But size_t - has an unknown underlying. In the nuttx sys/types.h header file, size_t - is typed as uint32_t (which is determined by architecture-specific logic). - But the C++ compiler may believe that size_t is of a different type resulting - in compilation errors in the operator. Using the underlying integer type - Instead of size_t seems to resolve the compilation issues. - -examples/hidkbd -^^^^^^^^^^^^^^^^ - - This is a simple test to debug/verify the USB host HID keyboard class - driver. - - CONFIG_EXAMPLES_HIDKBD_DEFPRIO - Priority of "waiter" thread. Default: - 50 - CONFIG_EXAMPLES_HIDKBD_STACKSIZE - Stacksize of "waiter" thread. Default - 1024 - CONFIG_EXAMPLES_HIDKBD_DEVNAME - Name of keyboard device to be used. - Default: "/dev/kbda" - CONFIG_EXAMPLES_HIDKBD_ENCODED - Decode special key press events in the - user buffer. In this case, the example coded will use the interfaces - defined in include/nuttx/input/kbd_codec.h to decode the returned - keyboard data. These special keys include such things as up/down - arrows, home and end keys, etc. If this not defined, only 7-bit print- - able and control ASCII characters will be provided to the user. - Requires CONFIG_HIDKBD_ENCODED && CONFIG_LIB_KBDCODEC - -endif -examples/igmp -^^^^^^^^^^^^^ - - This is a trivial test of the NuttX IGMP capability. It present it - does not do much of value -- Much more is needed in order to verify - the IGMP features! - - * CONFIG_EXAMPLES_IGMP_NOMAC - Set if the hardware has no MAC address; one will be assigned - * CONFIG_EXAMPLES_IGMP_IPADDR - Target board IP address - * CONFIG_EXAMPLES_IGMP_DRIPADDR - Default router address - * CONFIG_EXAMPLES_IGMP_NETMASK - Network mask - * CONFIG_EXAMPLES_IGMP_GRPADDR - Multicast group address - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - -examples/json -^^^^^^^^^^^^^ - - This example exercises the cJSON implementation at apps/netutils/json. - This example contains logic taken from the cJSON project: - - http://sourceforge.net/projects/cjson/ - - The example corresponds to SVN revision r42 (with lots of changes for - NuttX coding standards). As of r42, the SVN repository was last updated - on 2011-10-10 so I presume that the code is stable and there is no risk - of maintaining duplicate logic in the NuttX repository. - -examples/keypadtest -^^^^^^^^^^^^^^^^^^^ - - This is a generic keypad test example. It is similar to the USB hidkbd - example, but makes no assumptions about the underlying keyboard interface. - It uses the interfaces of include/nuttx/input/keypad.h. - - CONFIG_EXAMPLES_KEYPADTEST - Selects the keypadtest example (only need - if the mconf/Kconfig tool is used. - - CONFIG_EXAMPLES_KEYPAD_DEVNAME - The name of the keypad device that will - be opened in order to perform the keypad test. Default: "/dev/keypad" - -examples/lcdrw -^^^^^^^^^^^^^^ - - This example may be used to verify if you can or cannot read data - correctly from an LCD interface. At present, this supports only LCDs - with RGB565 color format. - - * CONFIG_EXAMPLES_LDCRW_DEVNO - LCD device number. Default: 0 - * CONFIG_EXAMPLES_LDCRW_XRES - LCD X resolution. Default: 240 - * CONFIG_EXAMPLES_LDCRW_YRES - LCD Y resolution. Default: 320 - - NOTE: This test exercises internal lcd driver interfaces. As such, it - relies on internal OS interfaces that are not normally available to a - user-space program. As a result, this example cannot be used if a - NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL). - -examples/mm -^^^^^^^^^^^ - - This is a simplified version of the "built-in" memory manager test of - mm/mm_test.c. It is simplified because it does not have access to the - internals of the memory manager as does mm/mm_test.c, but it has the - advantage that it runs in the actual NuttX tasking environment (the - mm/mm_test.c only runs in a PC simulation environment). - -examples/modbus -^^^^^^^^^^^^^^^ - - This is a port of the FreeModbus Linux demo. It derives from the - demos/LINUX directory of the FreeModBus version 1.5.0 (June 6, 2010) - that can be downloaded in its entirety from http://developer.berlios.de/project/showfiles.php?group_id=6120. - - CONFIG_EXAMPLES_MODBUS_PORT, Default 0 (for /dev/ttyS0) - CONFIG_EXAMPLES_MODBUS_BAUD, Default B38400 - CONFIG_EXAMPLES_MODBUS_PARITY, Default MB_PAR_EVEN - - CONFIG_EXAMPLES_MODBUS_REG_INPUT_START, Default 1000 - CONFIG_EXAMPLES_MODBUS_REG_INPUT_NREGS, Default 4 - CONFIG_EXAMPLES_MODBUS_REG_HOLDING_START, Default 2000 - CONFIG_EXAMPLES_MODBUS_REG_HOLDING_NREGS, Default 130 - - The FreeModBus library resides at apps/modbus. See apps/modbus/README.txt - for additional configuration information. - -examples/mount -^^^^^^^^^^^^^^ - - This contains a simple test of filesystem mountpoints. - - * CONFIG_EXAMPLES_MOUNT_DEVNAME - The name of the user-provided block device to mount. - If CONFIG_EXAMPLES_MOUNT_DEVNAME is not provided, then - a RAM disk will be configured. - - * CONFIG_EXAMPLES_MOUNT_NSECTORS - The number of "sectors" in the RAM disk used when - CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined. - - * CONFIG_EXAMPLES_MOUNT_SECTORSIZE - The size of each sectors in the RAM disk used when - CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined. - - * CONFIG_EXAMPLES_MOUNT_RAMDEVNO - The RAM device minor number used to mount the RAM disk used - when CONFIG_EXAMPLES_MOUNT_DEVNAME is not defined. The - default is zero (meaning that "/dev/ram0" will be used). - -examples/nettest -^^^^^^^^^^^^^^^^ - - This is a simple network test for verifying client- and server- - functionality in a TCP/IP connection. - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - -examples/nsh -^^^^^^^^^^^^ - - This directory provides an example of how to configure and use - the NuttShell (NSH) application. NSH is a simple shell - application. NSH is described in its own README located at - apps/nshlib/README.txt - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += nshlib - - NOTE: If the NSH serial console is used, then following is also - required to build the readline() library: - - CONFIGURED_APPS += system/readline - - And if networking is included: - - CONFIGURED_APPS += uiplib - CONFIGURED_APPS += dhcpc - CONFIGURED_APPS += resolv - CONFIGURED_APPS += tftp - CONFIGURED_APPS += webclient - - If the Telnet console is enabled, then the appconfig file (apps/.config) - should also include: - - CONFIGURED_APPS += netutils/telnetd - - Also if the Telnet console is enabled, make sure that you have the - following set in the NuttX configuration file or else the performance - will be very bad (because there will be only one character per TCP - transfer): - - CONFIG_STDIO_BUFFER_SIZE - Some value >= 64 - CONFIG_STDIO_LINEBUFFER=y - -examples/nx -^^^^^^^^^^^ - - This directory contains a simple test of a subset of the NX APIs - defined in include/nuttx/nx/nx.h. The following configuration options - can be selected: - - CONFIG_EXAMPLES_NX_BUILTIN -- Build the NX example as a "built-in" - that can be executed from the NSH command line - CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NX_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on - CONFIG_EXAMPLES_NX_BPP. - CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on - CONFIG_EXAMPLES_NX_BPP. - CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on - CONFIG_EXAMPLES_NX_BPP. - CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on - CONFIG_EXAMPLES_NX_BPP. - CONFIG_EXAMPLES_NX_FONTID - Selects the font (see font ID numbers in - include/nuttx/nx/nxfonts.h) - CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the fonts. Default depends on - CONFIG_EXAMPLES_NX_BPP. - CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options - include 2, 4, 8, 16, 24, and 32. Default is 32. - CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to - use pretty, framed NXTK windows with toolbars. - CONFIG_EXAMPLES_NX_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - - This test can be performed with either the single-user version of - NX or with the multiple user version of NX selected with CONFIG_NX_MULTIUSER. - If CONFIG_NX_MULTIUSER is defined, then the following configuration - options also apply: - - CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating - the NX server. Default 2048 - CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 100 - CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120 - CONFIG_EXAMPLES_NX_LISTENERPRIO -- The priority of the event listener - thread. Default 80. - CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with - nx_eventnotify(). Default: 4 - - If CONFIG_NX_MULTIUSER is defined, then the example also expects the - following settings and will generate an error if they are not as expected: - - CONFIG_DISABLE_MQUEUE=n - CONFIG_DISABLE_SIGNALS=n - CONFIG_DISABLE_PTHREAD=n - CONFIG_NX_BLOCKING=y - -examples/nxconsole -^^^^^^^^^^^^^^^^^^ - - This directory contains yet another version of the NuttShell (NSH). This - version uses the NX console device defined in include/nuttx/nx/nxconsole.h - for output. the result is that the NSH input still come from the standard - console input (probably a serial console). But the text output will go to - an NX winbdow. Prerequisite configuration settings for this test include: - - CONFIG_NX=y -- NX graphics must be enabled - CONFIG_NXCONSOLE=y -- The NX console driver must be built - CONFIG_NX_MULTIUSER=y -- NX multi-user support must be enabled. - CONFIG_DISABLE_MQUEUE=n -- Message queue support must be available. - CONFIG_DISABLE_SIGNALS=n -- Signals are needed - CONFIG_DISABLE_PTHREAD=n -- pthreads are needed - CONFIG_NX_BLOCKING=y -- pthread APIs must be blocking - CONFIG_NSH_CONSOLE=y -- NSH must be configured to use a console. - - The following configuration options can be selected to customize the - test: - - CONFIG_EXAMPLES_NXCON_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NXCON_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NXCON_BGCOLOR -- The color of the background. Default - Default is a darker royal blue. - CONFIG_EXAMPLES_NXCON_WCOLOR -- The color of the window. Default is a light - slate blue. - CONFIG_EXAMPLES_NXCON_FONTID -- Selects the font (see font ID numbers in - include/nuttx/nx/nxfonts.h) - CONFIG_EXAMPLES_NXCON_FONTCOLOR -- The color of the fonts. Default is - black. - CONFIG_EXAMPLES_NXCON_BPP -- Pixels per pixel to use. Valid options - include 2, 4, 8, 16, 24, and 32. Default is 32. - CONFIG_EXAMPLES_NXCON_TOOLBAR_HEIGHT -- The height of the toolbar. - Default: 16 - CONFIG_EXAMPLES_NXCON_TBCOLOR -- The color of the toolbar. Default is - a medium grey. - CONFIG_EXAMPLES_NXCON_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - - CONFIG_EXAMPLES_NXCON_MINOR -- The NX console device minor number. - Default is 0 corresponding to /dev/nxcon0 - CONFIG_EXAMPLES_NXCON_DEVNAME -- The quoated, full path to the - NX console device corresponding to CONFIG_EXAMPLES_NXCON_MINOR. - Default: "/dev/nxcon0" - CONFIG_EXAMPLES_NXCONSOLE_PRIO - Priority of the NxConsole task. - Default: SCHED_PRIORITY_DEFAULT - CONFIG_EXAMPLES_NXCONSOLE_STACKSIZE - Stack size allocated for the - NxConsole task. Default: 2048 - - The following configuration settings determine how to set up the NX - server (CONFIG_NX_MULTIUSER): - - CONFIG_EXAMPLES_NXCON_STACKSIZE -- The stacksize to use when creating - the NX server. Default 2048 - CONFIG_EXAMPLES_NXCON_CLIENTPRIO -- The client priority. Default: 100 - CONFIG_EXAMPLES_NXCON_SERVERPRIO -- The server priority. Default: 120 - CONFIG_EXAMPLES_NXCON_LISTENERPRIO -- The priority of the event listener - thread. Default 80. - CONFIG_EXAMPLES_NXCON_NOTIFYSIGNO -- The signal number to use with - nx_eventnotify(). Default: 4 - -examples/nxffs -^^^^^^^^^^^^^^ - - This is a test of the NuttX NXFFS FLASH file system. This is an NXFFS - stress test and beats on the file system very hard. It should only - be used in a simulation environment! Putting this NXFFS test on real - hardware will most likely destroy your FLASH. You have been warned. - -examples/nxflat -^^^^^^^^^^^^^^^ - - This example builds a small NXFLAT test case. This includes several - test programs under examples/nxflat tests. These tests are build using - the NXFLAT format and installed in a ROMFS file system. At run time, - each program in the ROMFS file system is executed. Requires CONFIG_NXFLAT. - -examplex/nxhello -^^^^^^^^^^^^^^^^ - - A very simple graphics example that just says "Hello, World!" in the - center of the display. - - The following configuration options can be selected: - - CONFIG_EXAMPLES_NXHELLO_BUILTIN -- Build the NXHELLO example as a "built-in" - that can be executed from the NSH command line - CONFIG_EXAMPLES_NXHELLO_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NXHELLO_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NXHELLO_BGCOLOR -- The color of the background. Default - depends on CONFIG_EXAMPLES_NXHELLO_BPP. - CONFIG_EXAMPLES_NXHELLO_FONTID - Selects the font (see font ID numbers in - include/nuttx/nx/nxfonts.h) - CONFIG_EXAMPLES_NXHELLO_FONTCOLOR -- The color of the fonts used in the - background window. Default depends on CONFIG_EXAMPLES_NXHELLO_BPP. - CONFIG_EXAMPLES_NXHELLO_BPP -- Pixels per pixel to use. Valid options - include 2, 4, 8, 16, 24, and 32. Default is 32. - CONFIG_EXAMPLES_NXHELLO_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - -examples/nximage -^^^^^^^^^^^^^^^^ - - This is a simple example that just puts the NuttX logo image in the center - of the display. This only works for RGB23 (888), RGB16 (656), RGB8 (332), - and 8-bit greyscale for now. - - CONFIG_EXAMPLES_NXIMAGE_BUILTIN -- Build the NXIMAGE example as a "built-in" - that can be executed from the NSH command line - CONFIG_EXAMPLES_NXIMAGE_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NXIMAGE_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NXIMAGE_BPP -- Pixels per pixel to use. Valid options - include 8, 16, and 24. Default is 16. - CONFIG_EXAMPLES_NXIMAGE_XSCALEp5, CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5, - CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0 -- The logo image width is 160 columns. - One of these may be defined to rescale the image horizontally by .5, 1.5, - or 2.0. - CONFIG_EXAMPLES_NXIMAGE_YSCALEp5, CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5, - CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0 -- The logo image height is 160 rows. - One of these may be defined to rescale the image vertically by .5, 1.5, - or 2.0. - CONFIG_EXAMPLES_NXIMAGE_GREYSCALE -- Grey scale image. Default: RGB. - CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - - How was that run-length encoded image produced? - - a. I used GIMP output the image as a .c file. - b. I added som C logic to palette-ize the RGB image in the GIMP .c file - c. Then I add some simple run-length encoding to palette-ized image. - - NOTE: As of this writing, most of the pixel depth, scaling options, and - combinations thereof have not been tested. - -examplex/nxlines -^^^^^^^^^^^^^^^^ - - A very simple graphics example that just exercised the NX line drawing - logic. - - The following configuration options can be selected: - - CONFIG_EXAMPLES_NXLINES_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NXLINES_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NXLINES_BGCOLOR -- The color of the background. Default - depends on CONFIG_EXAMPLES_NXLINES_BPP. - CONFIG_EXAMPLES_NXLINES_LINEWIDTH - Selects the width of the lines in - pixels (default: 16) - CONFIG_EXAMPLES_NXLINES_LINECOLOR -- The color of the central lines drawn - in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP - (there really is no meaningful default). - CONFIG_EXAMPLES_NXLINES_BORDERWIDTH -- The width of the circular border - drawn in the background window. (default: 16). - CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the circular border - drawn in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP - (there really is no meaningful default). - CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR -- The color of the circular region - filled in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP - (there really is no meaningful default). - CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the lines drawn in the - background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP (there - really is no meaningful default). - - CONFIG_EXAMPLES_NXLINES_BPP -- Pixels per pixel to use. Valid options - include 2, 4, 8, 16, 24, and 32. Default is 16. - CONFIG_EXAMPLES_NXLINES_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - - CONFIG_NSH_BUILTIN_APPS - Build the NX lines examples as an NSH built-in - function. - -examples/nxtext -^^^^^^^^^^^^^^^ - - This directory contains another simple test of a subset of the NX APIs - defined in include/nuttx/nx/nx.h. This text focuses on text displays on - the dispaly background combined with pop-up displays over the text. - The text display will continue to update while the pop-up is visible. - - NOTE: This example will *only* work with FB drivers and with LCD - drivers that support reading the contents of the internal LCD memory - *unless* you define CONFIG_EXAMPLES_NXTEXT_NOGETRUN. If you notice - garbage on the display or a failure at the point where the display - should scroll, it is probably because you have an LCD driver that is - write-only. - - The following configuration options can be selected: - - CONFIG_EXAMPLES_NXTEXT_BUILTIN -- Build the NXTEXT example as a "built-in" - that can be executed from the NSH command line - CONFIG_EXAMPLES_NXTEXT_VPLANE -- The plane to select from the frame- - buffer driver for use in the test. Default: 0 - CONFIG_EXAMPLES_NXTEXT_DEVNO - The LCD device to select from the LCD - driver for use in the test: Default: 0 - CONFIG_EXAMPLES_NXTEXT_BGCOLOR -- The color of the background. Default - depends on CONFIG_EXAMPLES_NXTEXT_BPP. - CONFIG_EXAMPLES_NXTEXT_BGFONTID - Selects the font to use in the - background text (see font ID numbers in include/nuttx/nx/nxfonts.h) - CONFIG_EXAMPLES_NXTEXT_BGFONTCOLOR -- The color of the fonts used in the - background window. Default depends on CONFIG_EXAMPLES_NXTEXT_BPP. - CONFIG_EXAMPLES_NXTEXT_PUCOLOR -- The color of the pop-up window. Default - depends on CONFIG_EXAMPLES_NXTEXT_BPP. - CONFIG_EXAMPLES_NXTEXT_PUFONTID - Selects the font to use in the pop-up - windows (see font ID numbers in include/nuttx/nx/nxfonts.h) - CONFIG_EXAMPLES_NXTEXT_PUFONTCOLOR -- The color of the fonts used in the - background window. Default depends on CONFIG_EXAMPLES_NXTEXT_BPP. - CONFIG_EXAMPLES_NXTEXT_BPP -- Pixels per pixel to use. Valid options - include 2, 4, 8, 16, 24, and 32. Default is 32. - CONFIG_EXAMPLES_NXTEXT_NOGETRUN -- If your display is read-only OR if - reading is not reliable, then select this configuration to avoid - reading from the display. - CONFIG_EXAMPLES_NXTEXT_EXTERNINIT - The driver for the graphics device on - this platform requires some unusual initialization. This is the - for, for example, SPI LCD/OLED devices. If this configuration is - selected, then the platform code must provide an LCD initialization - function with a prototype like: - - #ifdef CONFIG_NX_LCDDRIVER - FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno); - #else - FAR struct fb_vtable_s *up_nxdrvinit(unsigned int devno); - #endif - - CONFIG_EXAMPLES_NXTEXT_BMCACHE - The maximum number of characters that - can be put in the background window. Default is 128. - CONFIG_EXAMPLES_NXTEXT_GLCACHE - The maximum nuber of pre-rendered - fonts that can be retained for the background window. - - This test can be performed with either the single-user version of - NX or with the multiple user version of NX selected with CONFIG_NX_MULTIUSER. - If CONFIG_NX_MULTIUSER is defined, then the following configuration - options also apply: - - CONFIG_EXAMPLES_NXTEXT_STACKSIZE -- The stacksize to use when creating - the NX server. Default 2048 - CONFIG_EXAMPLES_NXTEXT_CLIENTPRIO -- The client priority. Default: 100 - CONFIG_EXAMPLES_NXTEXT_SERVERPRIO -- The server priority. Default: 120 - CONFIG_EXAMPLES_NXTEXT_LISTENERPRIO -- The priority of the event listener - thread. Default 80. - CONFIG_EXAMPLES_NXTEXT_NOTIFYSIGNO -- The signal number to use with - nx_eventnotify(). Default: 4 - - If CONFIG_NX_MULTIUSER is defined, then the example also expects the - following settings and will generate an error if they are not as expected: - - CONFIG_DISABLE_MQUEUE=n - CONFIG_DISABLE_SIGNALS=n - CONFIG_DISABLE_PTHREAD=n - CONFIG_NX_BLOCKING=y - -examples/null -^^^^^^^^^^^^^ - - This is the do nothing application. It is only used for bringing - up new NuttX architectures in the most minimal of environments. - -examples/ostest -^^^^^^^^^^^^^^^ - - This is the NuttX 'qualification' suite. It attempts to exercise - a broad set of OS functionality. Its coverage is not very extensive - as of this writing, but it is used to qualify each NuttX release. - - The behavior of the ostest can be modified with the following - settings in the configs/<board-name>/defconfig file: - - * CONFIG_EXAMPLES_OSTEST_BUILTIN - Build the OS test example as an NSH built-in application. - * CONFIG_EXAMPLES_OSTEST_LOOPS - Used to control the number of executions of the test. If - undefined, the test executes one time. If defined to be - zero, the test runs forever. - * CONFIG_EXAMPLES_OSTEST_STACKSIZE - Used to create the ostest task. Default is 8192. - * CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS - Specifies the number of threads to create in the barrier - test. The default is 8 but a smaller number may be needed on - systems without sufficient memory to start so many threads. - * CONFIG_EXAMPLES_OSTEST_RR_RANGE - During round-robin scheduling test two threads are created. Each of the threads - searches for prime numbers in the configurable range, doing that configurable - number of times. - This value specifies the end of search range and together with number of runs - allows to configure the length of this test - it should last at least a few - tens of seconds. Allowed values [1; 32767], default 10000 - * CONFIG_EXAMPLES_OSTEST_RR_RUNS - During round-robin scheduling test two threads are created. Each of the threads - searches for prime numbers in the configurable range, doing that configurable - number of times. - -examples/pashello -^^^^^^^^^^^^^^^^^ - - This is "Hello, World" implemented via the Pascal P-Code interpreter. In - order to use this example, you must first download and install the - NuttX pascal module. After unpacking the pascal module, you can find - installation instructions in pascal/nuttx/README.txt. - - The correct install location for the NuttX examples and build files is - apps/interpreters. - -examples/pipe -^^^^^^^^^^^^^ - - A test of the mkfifo() and pipe() APIs. - - * CONFIG_EXAMPLES_PIPE_STACKSIZE - Sets the size of the stack to use when creating the child tasks. - The default size is 1024. - -examples/poll -^^^^^^^^^^^^^ - - A test of the poll() and select() APIs using FIFOs and, if available, - stdin, and a TCP/IP socket. In order to build this test, you must the - following selected in your NuttX configuration file: - - CONFIG_NFILE_DESCRIPTORS - Defined to be greater than 0 - CONFIG_DISABLE_POLL - NOT defined - - In order to use the TCP/IP select test, you have also the following - additional things selected in your NuttX configuration file: - - CONFIG_NET - Defined for general network support - CONFIG_NET_TCP - Defined for TCP/IP support - CONFIG_NSOCKET_DESCRIPTORS - Defined to be greater than 0 - CONFIG_NET_NTCP_READAHEAD_BUFFERS - Defined to be greater than zero - - CONFIG_EXAMPLES_POLL_NOMAC - (May be defined to use software assigned MAC) - CONFIG_EXAMPLES_POLL_IPADDR - Target IP address - CONFIG_EXAMPLES_POLL_DRIPADDR - Default router IP addess - CONFIG_EXAMPLES_POLL_NETMASK - Network mask - - In order to for select to work with incoming connections, you - must also select: - - CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until accept() is called. - - In additional to the target device-side example, there is also - a host-side application in this directory. It can be compiled under - Linux or Cygwin as follows: - - cd examples/usbserial - make -f Makefile.host TOPDIR=<nuttx-directory> TARGETIP=<target-ip> - - Where <target-ip> is the IP address of your target board. - - This will generate a small program called 'host'. Usage: - - 1. Build the examples/poll target program with TCP/IP poll support - and start the target. - - 3. Then start the host application: - - ./host - - The host and target will exchange are variety of small messages. Each - message sent from the host should cause the select to return in target. - The target example should read the small message and send it back to - the host. The host should then receive the echo'ed message. - - If networking is enabled, applications using this example will need to - provide an appconfig file in the configuration driver with instruction - to build applications like: - - CONFIGURED_APPS += uiplib - -examples/posix_spawn -^^^^^^^^^^^^^^^^^^^^ - - This is a simple test of the posix_spawn() API. The example derives from - examples/elf. As a result, these tests are built using the relocatable - ELF format installed in a ROMFS file system. At run time, the test program - in the ROMFS file system is spawned using posix_spawn(). - - Requires: - - CONFIG_BINFMT_DISABLE=n - Don't disable the binary loader - CONFIG_ELF=y - Enable ELF binary loader - CONFIG_LIBC_EXECFUNCS=y - Enable support for posix_spawn - CONFIG_EXECFUNCS_SYMTAB="exports" - The name of the symbol table - created by the test. - CONFIG_EXECFUNCS_NSYMBOLS=10 - Value does not matter, it will be - corrected at runtime. - CONFIG_POSIX_SPAWN_STACKSIZE=768 - This default setting. - - Test-specific configuration options: - - CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR - The minor device number of the ROMFS - block. driver. For example, the N in /dev/ramN. Used for registering the - RAM block driver that will hold the ROMFS file system containing the ELF - executables to be tested. Default: 0 - - CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH - The path to the ROMFS block driver - device. This must match EXAMPLES_POSIXSPAWN_DEVMINOR. Used for - registering the RAM block driver that will hold the ROMFS file system - containing the ELF executables to be tested. Default: "/dev/ram0" - - NOTES: - - 1. CFLAGS should be provided in CELFFLAGS. RAM and FLASH memory regions - may require long allcs. For ARM, this might be: - - CELFFLAGS = $(CFLAGS) -mlong-calls - - Similarly for C++ flags which must be provided in CXXELFFLAGS. - - 2. Your top-level nuttx/Make.defs file must also include an approproate - definition, LDELFFLAGS, to generate a relocatable ELF object. With GNU - LD, this should include '-r' and '-e main' (or _main on some platforms). - - LDELFFLAGS = -r -e main - - If you use GCC to link, you make also need to include '-nostdlib' or - '-nostartfiles' and '-nodefaultlibs'. - - 3. This example also requires genromfs. genromfs can be build as part of the - nuttx toolchain. Or can built from the genromfs sources that can be found - at misc/tools/genromfs-0.5.2.tar.gz. In any event, the PATH variable must - include the path to the genromfs executable. - - 4. ELF size: The ELF files in this example are, be default, quite large - because they include a lot of "build garbage". You can greatly reduce the - size of the ELF binaries are using the 'objcopy --strip-unneeded' command to - remove un-necessary information from the ELF files. - - 5. Simulator. You cannot use this example with the the NuttX simulator on - Cygwin. That is because the Cygwin GCC does not generate ELF file but - rather some Windows-native binary format. - - If you really want to do this, you can create a NuttX x86 buildroot toolchain - and use that be build the ELF executables for the ROMFS file system. - - 6. Linker scripts. You might also want to use a linker scripts to combine - sections better. An example linker script is at nuttx/binfmt/libelf/gnu-elf.ld. - That example might have to be tuned for your particular linker output to - position additional sections correctly. The GNU LD LDELFFLAGS then might - be: - - LDELFFLAGS = -r -e main -T$(TOPDIR)/binfmt/libelf/gnu-elf.ld - -examples/pwm -^^^^^^^^^^^^ - - A test of a PWM device driver. It simply enables a pulsed output for - a specified frequency and duty for a specified period of time. This - example can ONLY be built as an NSH built-in function. - - This test depends on these specific PWM/NSH configurations settings (your - specific PWM settings might require additional settings). - - CONFIG_PWM - Enables PWM support. - CONFIG_EXAMPLES_PWM_COUNT - Enabled PWM pulse count support (if the - hardware supports it). - CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function. - Default: Not built! The example can only be used as an NSH built-in - application - - Specific configuration options for this example include: - - CONFIG_EXAMPLES_PWM_DEVPATH - The path to the default PWM device. Default: /dev/pwm0 - CONFIG_EXAMPLES_PWM_FREQUENCY - The initial PWM frequency. Default: 100 Hz - CONFIG_EXAMPLES_PWM_DUTYPCT - The initial PWM duty as a percentage. Default: 50% - CONFIG_EXAMPLES_PWM_DURATION - The initial PWM pulse train duration in seconds. - Used only if the current pulse count is zero (pulse count is only supported - if CONFIG_PWM_PULSECOUNT is defined). Default: 5 seconds - CONFIG_EXAMPLES_PWM_PULSECOUNT - The initial PWM pulse count. This option is - only available if CONFIG_PWM_PULSECOUNT is non-zero. Default: 0 (i.e., use - the duration, not the count). - -examples/qencoder -^^^^^^^^^^^^^^^^^ - - This example is a simple test of a Quadrature Encoder driver. It simply reads - positional data from the encoder and prints it., - - This test depends on these specific QE/NSH configurations settings (your - specific PWM settings might require additional settings). - - CONFIG_QENCODER - Enables quadrature encoder support (upper-half driver). - CONFIG_NSH_BUILTIN_APPS - Build the QE test as an NSH built-in function. - Default: Built as a standalone progrem. - - Additional configuration options will mostly likely be required for the board- - specific lower-half driver. See the README.txt file in your board configuration - directory. - - Specific configuration options for this example include: - - CONFIG_EXAMPLES_QENCODER_DEVPATH - The path to the QE device. Default: - /dev/qe0 - CONFIG_EXAMPLES_QENCODER_NSAMPLES - If CONFIG_NSH_BUILTIN_APPS - is defined, then the number of samples is provided on the command line - and this value is ignored. Otherwise, this number of samples is - collected and the program terminates. Default: Samples are collected - indefinitely. - CONFIG_EXAMPLES_QENCODER_DELAY - This value provides the delay (in - milliseonds) between each sample. If CONFIG_NSH_BUILTIN_APPS - is defined, then this value is the default delay if no other delay is - provided on the command line. Default: 100 milliseconds - -examples/relays -^^^^^^^^^^^^^^^ - - Requires CONFIG_ARCH_RELAYS. - Contributed by Darcy Gong. - - NOTE: This test exercises internal relay driver interfaces. As such, it - relies on internal OS interfaces that are not normally available to a - user-space program. As a result, this example cannot be used if a - NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL). - -examples/rgmp -^^^^^^^^^^^^^ - - RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for - running GPOS and RTOS simultaneously on multi-processor platforms. You can - port your favorite RTOS to RGMP together with an unmodified Linux to form a - hybrid operating system. This makes your application able to use both RTOS - and GPOS features. - - See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further - - At present, the RGMP example folder contains only an empty rgmp_main.c file. - -examples/romfs -^^^^^^^^^^^^^^ - - This example exercises the romfs filesystem. Configuration options - include: - - * CONFIG_EXAMPLES_ROMFS_RAMDEVNO - The minor device number to use for the ROM disk. The default is - 1 (meaning /dev/ram1) - - * CONFIG_EXAMPLES_ROMFS_SECTORSIZE - The ROM disk sector size to use. Default is 64. - - * CONFIG_EXAMPLES_ROMFS_MOUNTPOINT - The location to mount the ROM disk. Deafault: "/usr/local/share" - -examples/sendmail -^^^^^^^^^^^^^^^^^ - - This examples exercises the uIP SMTP logic by sending a test message - to a selected recipient. This test can also be built to execute on - the Cygwin/Linux host environment: - - cd examples/sendmail - make -f Makefile.host TOPDIR=<nuttx-directory> - - Settings unique to this example include: - - CONFIG_EXAMPLES_SENDMAIL_NOMAC - May be defined to use software assigned MAC (optional) - CONFIG_EXAMPLES_SENDMAIL_IPADDR - Target IP address (required) - CONFIG_EXAMPLES_SENDMAIL_DRIPADDR - Default router IP addess (required) - CONFIG_EXAMPLES_SENDMAILT_NETMASK - Network mask (required) - CONFIG_EXAMPLES_SENDMAIL_RECIPIENT - The recipient of the email (required) - CONFIG_EXAMPLES_SENDMAIL_SENDER - Optional. Default: "nuttx-testing@example.com" - CONFIG_EXAMPLES_SENDMAIL_SUBJECT - Optional. Default: "Testing SMTP from NuttX" - CONFIG_EXAMPLES_SENDMAIL_BODY - Optional. Default: "Test message sent by NuttX" - - NOTE: This test has not been verified on the NuttX target environment. - As of this writing, unit-tested in the Cygwin/Linux host environment. - - NOTE 2: This sendmail example only works for the simplest of - environments. Virus protection software on your host may have - to be disabled to allow you to send messages. Only very open, - unprotected recipients can be used. Most will protect themselves - from this test email because it looks like SPAM. - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - CONFIGURED_APPS += smtp - -examples/serloop -^^^^^^^^^^^^^^^^ - - This is a mindlessly simple loopback test on the console. Useful - for testing new serial drivers. Configuration options include: - - * CONFIG_EXAMPLES_SERLOOP_BUFIO - Use C buffered I/O (getchar/putchar) vs. raw console I/O - (read/read). - -examples/telnetd -^^^^^^^^^^^^^^^^ - - This directory contains a functional port of the tiny uIP shell. In - the NuttX environment, the NuttShell (at apps/nshlib) supercedes this - tiny shell and also supports telnetd. - - CONFIG_EXAMPLES_TELNETD_DAEMONPRIO - Priority of the Telnet daemon. - Default: SCHED_PRIORITY_DEFAULT - CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE - Stack size allocated for the - Telnet daemon. Default: 2048 - CONFIG_EXAMPLES_TELNETD_CLIENTPRIO- Priority of the Telnet client. - Default: SCHED_PRIORITY_DEFAULT - CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE - Stack size allocated for the - Telnet client. Default: 2048 - CONFIG_EXAMPLES_TELNETD_NOMAC - If the hardware has no MAC address of its - own, define this =y to provide a bogus address for testing. - CONFIG_EXAMPLES_TELNETD_IPADDR - The target IP address. Default 10.0.0.2 - CONFIG_EXAMPLES_TELNETD_DRIPADDR - The default router address. Default - 10.0.0.1 - CONFIG_EXAMPLES_TELNETD_NETMASK - The network mask. Default: 255.255.255.0 - - The appconfig file (apps/.config) should include: - - CONFIGURED_APPS += examples/telnetd - CONFIGURED_APPS += netutils/uiplib - CONFIGURED_APPS += netutils/telnetd - - Also, make sure that you have the following set in the NuttX configuration - file or else the performance will be very bad (because there will be only - one character per TCP transfer): - - CONFIG_STDIO_BUFFER_SIZE - Some value >= 64 - CONFIG_STDIO_LINEBUFFER=y - -examples/thttpd -^^^^^^^^^^^^^^^ - - An example that builds netutils/thttpd with some simple NXFLAT - CGI programs. see configs/README.txt for most THTTPD settings. - In addition to those, this example accepts: - - CONFIG_EXAMPLES_THTTPD_NOMAC - (May be defined to use software assigned MAC) - CONFIG_EXAMPLES_THTTPD_DRIPADDR - Default router IP addess - CONFIG_EXAMPLES_THTTPD_NETMASK - Network mask - - Applications using this example will need to provide an appconfig - file in the configuration directory with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - CONFIGURED_APPS += thttpd - -examples/tiff -^^^^^^^^^^^^^ - - This is a simple unit test for the TIFF creation library at apps/graphic/tiff. - It is configured to work in the Linux user-mode simulation and has not been - tested in any other environment. Since the example also depends on some - other logic to mount a file system, currently it will only work as an NSH - built-on, i.e., if the following is defined: - - CONFIG_NSH_BUILTIN_APPS=y - CONFIG_EXAMPLES_TIFF_BUILTIN=y - - At a miniumum, to run in an embedded environment, you will probably have to - change the configured paths to the TIFF files defined in the example. - - CONFIG_EXAMPLES_TIFF_OUTFILE - Name of the resulting TIFF file. Default is - "/tmp/result.tif" - CONFIG_EXAMPLES_TIFF_TMPFILE1/2 - Names of two temporaries files that - will be used in the file creation. Defaults are "/tmp/tmpfile1.dat" and - "/tmp/tmpfile2.dat" - - The following must also be defined in your apps/ configuration file: - - CONFIGURED_APPS += examples/tiff - CONFIGURED_APPS += graphics/tiff - -examples/touchscreen -^^^^^^^^^^^^^^^^^^^^ - - This configuration implements a simple touchscreen test at - apps/examples/touchscreen. This test will create an empty X11 window - and will print the touchscreen output as it is received from the - simulated touchscreen driver. - - CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN - Build the touchscreen test as - an NSH built-in function. Default: Built as a standalone problem - CONFIG_EXAMPLES_TOUCHSCREEN_MINOR - The minor device number. Minor=N - correspnds to touchscreen device /dev/input0. Note this value must - with CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH. Default 0. - CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH - The path to the touchscreen - device. This must be consistent with CONFIG_EXAMPLES_TOUCHSCREEN_MINOR. - Default: "/dev/input0" - CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES - If CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN - is defined, then the number of samples is provided on the command line - and this value is ignored. Otherwise, this number of samples is - collected and the program terminates. Default: Samples are collected - indefinitely. - - The following additional configurations must be set in the NuttX - configuration file: - - CONFIG_INPUTP=y - (Plus any touchscreen-specific settings). - - The following must also be defined in your apps configuration file: - - CONFIGURED_APPS += examples/tiff - CONFIGURED_APPS += graphics/tiff - - The board-specific logic must provide the following interfaces that will - be called by the example in order to initialize and uninitialize the - touchscreen hardware: - - int arch_tcinitialize(int minor); - int arch_tcuninitialize(void); - -examples/udp -^^^^^^^^^^^^ - - This is a simple network test for verifying client- and server- - functionality over UDP. - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - -examples/uip -^^^^^^^^^^^^ - - This is a port of uIP tiny webserver example application. Settings - specific to this example include: - - CONFIG_EXAMPLES_UIP_NOMAC - (May be defined to use software assigned MAC) - CONFIG_EXAMPLES_UIP_IPADDR - Target IP address - CONFIG_EXAMPLES_UIP_DRIPADDR - Default router IP addess - CONFIG_EXAMPLES_UIP_NETMASK - Network mask - CONFIG_EXAMPLES_UIP_DHCPC - Select to get IP address via DHCP - - If you use DHCPC, then some special configuration network options are - required. These include: - - CONFIG_NET=y - Of course - CONFIG_NSOCKET_DESCRIPTORS - And, of course, you must allocate some - socket descriptors. - CONFIG_NET_UDP=y - UDP support is required for DHCP - (as well as various other UDP-related - configuration settings). - CONFIG_NET_BROADCAST=y - UDP broadcast support is needed. - CONFIG_NET_BUFSIZE=650 - Per RFC2131 (p. 9), the DHCP client must be - (or larger) prepared to receive DHCP messages of up to - 576 bytes (excluding Ethernet, IP, or UDP - headers and FCS). - - Other configuration items apply also to the selected webserver net utility. - Additional relevant settings for the uIP webserver net utility are: - - CONFIG_NETUTILS_HTTPDSTACKSIZE - CONFIG_NETUTILS_HTTPDFILESTATS - CONFIG_NETUTILS_HTTPDNETSTATS - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - CONFIGURED_APPS += dhcpc - CONFIGURED_APPS += resolv - CONFIGURED_APPS += webserver - - NOTE: This example does depend on the perl script at - nuttx/tools/mkfsdata.pl. You must have perl installed on your - development system at /usr/bin/perl. - -examples/usbserial -^^^^^^^^^^^^^^^^^^ - - TARGET CONFIGURATION: - - This is another implementation of "Hello, World" but this one uses - a USB serial driver. Configuration options can be used to simply - the test. These options include: - - CONFIG_EXAMPLES_USBSERIAL_INONLY - Only verify IN (device-to-host) data transfers. Default: both - CONFIG_EXAMPLES_USBSERIAL_OUTONLY - Only verify OUT (host-to-device) data transfers. Default: both - CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL - Send only small, single packet messages. Default: Send large and small. - CONFIG_EXAMPLES_USBSERIAL_ONLYBIG - Send only large, multi-packet messages. Default: Send large and small. - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then - the example code will also manage the USB trace output. The amount of trace output - can be controlled using: - - CONFIG_EXAMPLES_USBSERIAL_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_USBSERIAL_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS - Show interrupt-related events. - - Error results are always shown in the trace output - - HOST-SIDE TEST PROGRAM - - In additional to the target device-side example, there is also a - host-side application in this directory. This host side application - must be executed on a Linux host in order to perform the USBSERIAL - test. The host application can be compiled under Linux (or Cygwin?) - as follows: - - cd examples/usbserial - make -f Makefile.host TOPDIR=<nuttx-directory> - - RUNNING THE TEST - - This will generate a small program called 'host'. Usage: - - 1. Build the examples/usbserial target program and start the target. - - 2. Wait a bit, then do enter: - - dmesg - - At the end of the dmesg output, you should see the serial - device was successfully idenfied and assigned to a tty device, - probably /dev/ttyUSB0 or /dev/ttyACM0 (depending on the configured - USB serial driver). - - 3. Then start the host application: - - ./host [<tty-dev>] - - Where: - - <tty-dev> is the USB TTY device to use. The default is - "/dev/ttyUSB0" (for the PL2303 emulation) or "/dev/ttyACM0" (for - the CDC/ACM serial device). - - The host and target will exchange are variety of very small and very large - serial messages. - -examples/usbstorage -^^^^^^^^^^^^^^^^^^^ - - This example registers a block device driver, then exports the block - the device using the USB storage class driver. In order to use this - example, your board-specific logic must provide the function: - - void usbmsc_archinitialize(void); - - This function will be called by the example/usbstorage in order to - do the actual registration of the block device drivers. For examples - of the implementation of usbmsc_archinitialize() see - configs/mcu123-lpc124x/src/up_usbmsc.c or - configs/stm3210e-eval/src/usbmsc.c - - Configuration options: - - CONFIG_EXAMPLES_USBMSC_BUILTIN - This example can be built as two NSH "built-in" commands if this option - is selected: 'msconn' will connect the USB mass storage device; 'msdis' - will disconnect the USB storage device. - CONFIG_EXAMPLES_USBMSC_NLUNS - Defines the number of logical units (LUNs) exported by the USB storage - driver. Each LUN corresponds to one exported block driver (or partition - of a block driver). May be 1, 2, or 3. Default is 1. - CONFIG_EXAMPLES_USBMSC_DEVMINOR1 - The minor device number of the block driver for the first LUN. For - example, N in /dev/mmcsdN. Used for registering the block driver. Default - is zero. - CONFIG_EXAMPLES_USBMSC_DEVPATH1 - The full path to the registered block driver. Default is "/dev/mmcsd0" - CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS - is 2 or 3. No defaults. - CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS - is 3. No defaults. - CONFIG_EXAMPLES_USBMSC_DEBUGMM - Enables some debug tests to check for memory usage and memory leaks. - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then - the example code will also manage the USB trace output. The amount of trace output - can be controlled using: - - CONFIG_EXAMPLES_USBMSC_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_USBMSC_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS - Show interrupt-related events. - - Error results are always shown in the trace output - - NOTE 1: When built as an NSH add-on command (CONFIG_EXAMPLES_USBMSC_BUILTIN=y), - Caution should be used to assure that the SD drive (or other storage device) is - not in use when the USB storage device is configured. Specifically, the SD - driver should be unmounted like: - - nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Card is mounted in NSH - ... - nsh> umount /mnd/sdcard # Unmount before connecting USB!!! - nsh> msconn # Connect the USB storage device - ... - nsh> msdis # Disconnect USB storate device - nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Restore the mount - - Failure to do this could result in corruption of the SD card format. - - NOTE 2: This test exercises internal USB device driver interfaces. As such, - it relies on internal OS interfaces that are not normally available to a - user-space program. As a result, this example cannot be used if a - NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL). - -examples/usbterm -^^^^^^^^^^^^^^^^ - - This example implements a little USB terminal.. more of a USB "chat" - edited lines are received from the remote host connected via USB - serial and echoed out the target serial console. Edited lines from - the local target serial console are received and forwarded to the - remote host via USB serial. - - Usage: - - Build the example and load into the target FLASH - - Connect on terminal to the target RS-232 connect and configure - for 115200 8N1. For example, suppose this Tera Term on a Windows - box. - - Power up the target board - - Connect the USB to a Linux box. Use the Linux dmesg command to - assure that the connect was successful. The USB CDC ACM device - should appear as /dev/ttyACM0 - - On the Linux box, open minicom with tty=/dev/ttyACM0. - Configure minicom so that (1) local characters are echoed and (2) - so that no CR is required. - - Now what you type on the target Tera Term window should echo on - the Linux minicom window and, conversely, what you type on the - minicom winow should be echo in the target Tera Term window. - - Configuration options: - - CONFIG_EXAMPLES_USBTERM_BUILTIN - Build the usbterm example as an NSH - built-in command. NOTE: This is not fully functional as of this - writing.. It should work, but there is no mechanism in place yet - to exit the USB terminal program and return to NSH. - CONFIG_EXAMPLES_USBTERM_DEVINIT - If defined, then the example will - call a user provided function as part of its initialization: - int usbterm_devinit(void); - And another user provided function at termination: - void usbterm_devuninit(void); - CONFIG_EXAMPLES_USBTERM_BUFLEN - The size of the input and output - buffers used for receiving data. Default 256 bytes. - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB, or - CONFIG_USBDEV_TRACE), then the example code will also manage the USB trace - output. The amount of trace output can be controlled using: - - CONFIG_EXAMPLES_USBTERM_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_USBTERM_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_USBTERM_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS - Show interrupt-related events. - - NOTE: By default, USBterm uses readline to get data from stdin. So your - appconfig file must have the following build path: - - CONFIGURED_APPS += system/readline - - NOTE: If you use the USBterm task over a telnet NSH connection, then you - should set the following configuration item: - - CONFIG_EXAMPLES_USBTERM_FGETS=y - - By default, the USBterm client will use readline() to get characters from - the console. Readline includes and command-line editor and echos - characters received in stdin back through stdout. Neither of these - behaviors are desire-able if Telnet is used. - - Error results are always shown in the trace output - - Other relevant configuration options: CONFIG_CDCACM selected by the - Prolifics emulation (not defined) and the CDC serial implementation - (when defined). CONFIG_USBDEV_TRACE_INITIALIDSET. - -examples/watchdog -^^^^^^^^^^^^^^^^^ - - A simple test of a watchdog timer driver. Initializes starts the watchdog - timer. It pings the watchdog timer for a period of time then lets the - watchdog timer expire... resetting the CPU is successful. This - example can ONLY be built as an NSH built-in function. - - This test depends on these specific Watchdog/NSH configurations settings (your - specific watchdog hardware settings might require additional settings). - - CONFIG_WATCHDOG- Enables watchdog timer support support. - CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH - built-in function. Default: Not built! The example can only be used - as an NSH built-in application - - Specific configuration options for this example include: - - CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. - Default: /dev/watchdog0 - CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example - will ping the watchdog before letting the watchdog expire. Default: 5000 - milliseconds - CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in - milliseconds. Default: 500 milliseconds. - CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in - milliseconds before the watchdog timer expires. Default: 2000 - milliseconds. - -examples/wget -^^^^^^^^^^^^^ - - A simple web client example. It will obtain a file from a server using the HTTP - protocol. Settings unique to this example include: - - CONFIG_EXAMPLES_WGET_URL - The URL of the file to get - CONFIG_EXAMPLES_WGET_NOMAC - (May be defined to use software assigned MAC) - CONFIG_EXAMPLES_WGET_IPADDR - Target IP address - CONFIG_EXAMPLES_WGET_DRIPADDR - Default router IP addess - CONFIG_EXAMPLES_WGET_NETMASK - Network mask - - This example uses netutils/webclient. Additional configuration settings apply - to that code as follows (but built-in defaults are probably OK): - - CONFIG_WEBCLIENT_GETMIMETYPE, CONFIG_WEBCLIENT_MAXHTTPLINE, - CONFIG_WEBCLIENT_MAXMIMESIZE, CONFIG_WEBCLIENT_MAXHOSTNAME, - CONFIG_WEBCLIENT_MAXFILENAME - - Of course, the example also requires other settings including CONFIG_NET and - CONFIG_NET_TCP. The example also uses the uIP resolver which requires CONFIG_UDP. - - WARNNG: As of this writing, wget is untested on the target platform. At present - it has been tested only in the host-based configuration described in the following - note. The primary difference is that the target version will rely on the also - untested uIP name resolver. - - NOTE: For test purposes, this example can be built as a host-based wget function. - This can be built as follows: - - cd examples/wget - make -f Makefile.host - - Applications using this example will need to provide an appconfig - file in the configuration driver with instruction to build applications - like: - - CONFIGURED_APPS += uiplib - CONFIGURED_APPS += resolv - CONFIGURED_APPS += webclient - -examples/wget -^^^^^^^^^^^^^ - - Uses wget to get a JSON encoded file, then decodes the file. - - CONFIG_EXAMPLES_WDGETJSON_MAXSIZE - Max. JSON Buffer Size - CONFIG_EXAMPLES_EXAMPLES_WGETJSON_URL - wget URL - -examples/xmlrpc -^^^^^^^^^^^^^^^ - - This example exercises the "Embeddable Lightweight XML-RPC Server" which - is discussed at: - - http://www.drdobbs.com/web-development/an-embeddable-lightweight-xml-rpc-server/184405364 - - Configuration options: - - CONFIG_EXAMPLES_XMLRPC_BUFFERSIZE - HTTP buffer size. Default 1024 - CONFIG_EXAMPLES_XMLRPC_DHCPC - Use DHCP Client. Default n. Ignored - if CONFIG_NSH_BUILTIN_APPS is selected. - CONFIG_EXAMPLES_XMLRPC_NOMAC - Use Canned MAC Address. Defaul n. Ignored - if CONFIG_NSH_BUILTIN_APPS is selected. - CONFIG_EXAMPLES_XMLRPC_IPADDR - Target IP address. Default 0x0a000002. - Ignored if CONFIG_NSH_BUILTIN_APPS is selected. - CONFIG_EXAMPLES_XMLRPC_DRIPADDR - Default Router IP address (Gateway). - Default 0x0a000001. Ignored if CONFIG_NSH_BUILTIN_APPS is selected. - CONFIG_EXAMPLES_XMLRPC_NETMASK - Network Mask. Default 0xffffff00 - Ignored if CONFIG_NSH_BUILTIN_APPS is selected. |