diff options
author | Julian Oes <julian@oes.ch> | 2013-07-08 10:31:32 +0200 |
---|---|---|
committer | Julian Oes <julian@oes.ch> | 2013-07-08 10:31:32 +0200 |
commit | 88389ea2554c6f56a4fdd86cdd86a1e7b6affc21 (patch) | |
tree | 3ef98ded43e5f3a2cdc30a836a3a7329fe5757bb /apps/nshlib/README.txt | |
parent | 76346bfe19c816491a6982abfa10f48cd9d258f6 (diff) | |
parent | cf2dbdf9a1ae06c7d0e0a7963916a3709a1bc075 (diff) | |
download | px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.tar.gz px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.tar.bz2 px4-firmware-88389ea2554c6f56a4fdd86cdd86a1e7b6affc21.zip |
Merge branch 'master' into new_state_machine
compiling again
Conflicts:
src/modules/fixedwing_att_control/fixedwing_att_control_att.c
src/modules/fixedwing_att_control/fixedwing_att_control_rate.c
src/modules/fixedwing_pos_control/fixedwing_pos_control_main.c
src/modules/mavlink/orb_listener.c
src/modules/multirotor_att_control/multirotor_attitude_control.c
src/modules/multirotor_att_control/multirotor_rate_control.c
src/modules/systemlib/pid/pid.c
src/modules/systemlib/pid/pid.h
src/modules/uORB/objects_common.cpp
Diffstat (limited to 'apps/nshlib/README.txt')
-rw-r--r-- | apps/nshlib/README.txt | 1218 |
1 files changed, 0 insertions, 1218 deletions
diff --git a/apps/nshlib/README.txt b/apps/nshlib/README.txt deleted file mode 100644 index a03f4a8ee..000000000 --- a/apps/nshlib/README.txt +++ /dev/null @@ -1,1218 +0,0 @@ -apps/nshlib -^^^^^^^^^^^ - - This directory contains the NuttShell (NSH) library. This library can be - linked with other logic to provide a simple shell application for NuttX. - - - Console/NSH Front End - - Command Overview - - Conditional Command Execution - - Built-In Variables - - Current Working Directory - Environment Variables - - NSH Start-Up Script - - Simple Commands - - NSH Configuration Settings - Command Dependencies on Configuration Settings - NSH-Specific Configuration Settings - - Common Problems - -Console/NSH Front End -^^^^^^^^^^^^^^^^^^^^^ - - Using settings in the configuration file, NSH may be configured to - use either the serial stdin/out or a telnet connection as the console - or BOTH. When NSH is started, you will see the following welcome on - either console: - - NuttShell (NSH) - nsh> - - 'nsh>' is the NSH prompt and indicates that you may enter a command - from the console. - -Command Overview -^^^^^^^^^^^^^^^^ - - This directory contains the NuttShell (NSH). This is a simple - shell-like application. At present, NSH supports the following commands - forms: - - Simple command: <cmd> - Command with re-directed output: <cmd> > <file> - <cmd> >> <file> - Background command: <cmd> & - Re-directed background command: <cmd> > <file> & - <cmd> >> <file> & - - Where: - - <cmd> is any one of the simple commands listed later. - <file> is the full or relative path to any writable object - in the filesystem name space (file or character driver). - Such objects will be referred to simply as files throughout - this README. - - NSH executes at the mid-priority (128). Backgrounded commands can - be made to execute at higher or lower priorities using nice: - - [nice [-d <niceness>>]] <cmd> [> <file>|>> <file>] [&] - - Where <niceness> is any value between -20 and 19 where lower - (more negative values) correspond to higher priorities. The - default niceness is 10. - -Conditional Command Execution -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - An if-then[-else]-fi construct is also supported in order to - support conditional execution of commands. This works from the - command line but is primarily intended for use within NSH scripts - (see the sh commnd). The syntax is as follows: - - if <cmd> - then - [sequence of <cmd>] - else - [sequence of <cmd>] - fi - -Built-In Variables -^^^^^^^^^^^^^^^^^^ - - $? - The result of the last simple command execution - -Current Working Directory -^^^^^^^^^^^^^^^^^^^^^^^^^ - - All path arguments to commands may be either an absolute path or a - path relative to the current working directory. The current working - directory is set using the 'cd' command and can be queried either - by using the 'pwd' command or by using the 'echo $PWD' command. - - Environment Variables: - ---------------------- - - PWD - The current working directory - OLDPWD - The previous working directory - -NSH Start-Up Script -^^^^^^^^^^^^^^^^^^^ - -NSH supports options to provide a start up script for NSH. In general -this capability is enabled with CONFIG_NSH_ROMFSETC, but has -several other related configuration options as described in the final -section of this README. This capability also depends on: - - - CONFIG_DISABLE_MOUNTPOINT not set - - CONFIG_NFILE_DESCRIPTORS > 4 - - CONFIG_FS_ROMFS - -Default Start-Up Behavior -------------------------- - -The implementation that is provided is intended to provide great flexibility -for the use of Start-Up files. This paragraph will discuss the general -behavior when all of the configuration options are set to the default -values. - -In this default case, enabling CONFIG_NSH_ROMFSETC will cause -NSH to behave as follows at NSH startup time: - -- NSH will create a read-only RAM disk (a ROM disk), containing a tiny - ROMFS filesystem containing the following: - - |--init.d/ - `-- rcS - - Where rcS is the NSH start-up script - -- NSH will then mount the ROMFS filesystem at /etc, resulting in: - - |--dev/ - | `-- ram0 - `--etc/ - `--init.d/ - `-- rcS - -- By default, the contents of rcS script are: - - # Create a RAMDISK and mount it at XXXRDMOUNTPOUNTXXX - - mkrd -m 1 -s 512 1024 - mkfatfs /dev/ram1 - mount -t vfat /dev/ram1 /tmp - -- NSH will execute the script at /etc/init.d/rcS at start-up (before the - first NSH prompt. After execution of the script, the root FS will look - like: - - |--dev/ - | |-- ram0 - | `-- ram1 - |--etc/ - | `--init.d/ - | `-- rcS - `--tmp/ - -Modifying the ROMFS Image -------------------------- - -The contents of the /etc directory are retained in the file -apps/nshlib/nsh_romfsimg.h (OR, if CONFIG_NSH_ARCHROMFS -is defined, include/arch/board/rcs.template). In order to modify -the start-up behavior, there are three things to study: - -1. Configuration Options. - The additional CONFIG_NSH_ROMFSETC configuration options - discussed in the final section of this README. - -2. tools/mkromfsimg.sh Script. - The script tools/mkromfsimg.sh creates nsh_romfsimg.h. - It is not automatically executed. If you want to change the - configuration settings associated with creating and mounting - the /tmp directory, then it will be necessary to re-generate - this header file using the mkromfsimg.sh script. - - The behavior of this script depends upon three things: - - - The configuration settings of the installed NuttX configuration. - - The genromfs tool (available from http://romfs.sourceforge.net). - - The file apps/nshlib/rcS.template (OR, if - CONFIG_NSH_ARCHROMFS is defined, include/arch/board/rcs.template) - -3. rcS.template. - The file apps/nshlib/rcS.template contains the general form - of the rcS file; configured values are plugged into this - template file to produce the final rcS file. - -NOTE: - - apps/nshlib/rcS.template generates the standard, default - nsh_romfsimg.h file. If CONFIG_NSH_ARCHROMFS is defined - in the NuttX configuration file, then a custom, board-specific - nsh_romfsimg.h file residing in configs/<board>/include will be - used. NOTE when the OS is configured, include/arch/board will - be linked to configs/<board>/include. - -All of the startup-behavior is contained in rcS.template. The -role of mkromfsimg.sh is to (1) apply the specific configuration -settings to rcS.template to create the final rcS, and (2) to -generate the header file nsh_romfsimg.h containg the ROMFS -file system image. - -Simple Commands -^^^^^^^^^^^^^^^ - -o [ <expression> ] -o test <expression> - - These are two alternative forms of the same command. They support - evaluation of a boolean expression which sets $?. This command - is used most frequently as the conditional command following the - 'if' in the if-then[-else]-fi construct. - - Expression Syntax: - ------------------ - - expression = simple-expression | !expression | - expression -o expression | expression -a expression - - simple-expression = unary-expression | binary-expression - - unary-expression = string-unary | file-unary - - string-unary = -n string | -z string - - file-unary = -b file | -c file | -d file | -e file | -f file | - -r file | -s file | -w file - - binary-expression = string-binary | numeric-binary - - string-binary = string = string | string == string | string != string - - numeric-binary = integer -eq integer | integer -ge integer | - integer -gt integer | integer -le integer | - integer -lt integer | integer -ne integer - -o base64dec [-w] [-f] <string or filepath> - -o base64dec [-w] [-f] <string or filepath> - -o cat <path> [<path> [<path> ...]] - - This command copies and concatentates all of the files at <path> - to the console (or to another file if the output is redirected). - -o cd [<dir-path>|-|~|..] - - Changes the current working directory (PWD). Also sets the - previous working directory environment variable (OLDPWD). - - FORMS: - ------ - - 'cd <dir-path>' sets the current working directory to <dir-path>. - 'cd -' sets the current working directory to the previous - working directory ($OLDPWD). Equivalent to 'cd $OLDPWD'. - 'cd' or 'cd ~' set the current working directory to the 'home' - directory. The 'home' directory can be configured by setting - CONFIG_LIB_HOMEDIR in the configuration file. The default - 'home' directory is '/'. - 'cd ..' sets the current working directory to the parent directory. - -o cp <source-path> <dest-path> - - Copy of the contents of the file at <source-path> to the location - in the filesystem indicated by <path-path> - -o date [-s "MMM DD HH:MM:SS YYYY"] - - Show or set the current date and time. This command is only supported - if the platform supported RTC hardware (CONFIG_RTC=y). - - Only one format is used both on display and when setting the date/time: - MMM DD HH:MM:SS YYYY. For example, - - data -s "Sep 1 11:30:00 2011" - - 24-hour time format is assumed. - -o dd if=<infile> of=<outfile> [bs=<sectsize>] [count=<sectors>] [skip=<sectors>] - - Copy blocks from <infile> to <outfile>. <nfile> or <outfile> may - be the path to a standard file, a character device, or a block device. - - Examples: - - 1. Read from character device, write to regular file. This will - create a new file of the specified size filled with zero. - - nsh> dd if=/dev/zero of=/tmp/zeros bs=64 count=16 - nsh> ls -l /tmp - /tmp: - -rw-rw-rw- 1024 ZEROS - - 2. Read from character device, write to block device. This will - fill the entire block device with zeros. - - nsh> ls -l /dev - /dev: - brw-rw-rw- 0 ram0 - crw-rw-rw- 0 zero - nsh> dd if=/dev/zero of=/dev/ram0 - - 3. Read from a block devic, write to a character device. This - will read the entire block device and dump the contents in - the bit bucket. - - nsh> ls -l /dev - /dev: - crw-rw-rw- 0 null - brw-rw-rw- 0 ram0 - nsh> dd if=/dev/ram0 of=/dev/null - -o df - - Show the state of each mounted volume. - - Example: - - nsh> mount - /etc type romfs - /tmp type vfat - nsh> df - Block Number - Size Blocks Used Available Mounted on - 64 6 6 0 /etc - 512 985 2 983 /tmp - nsh> - -o echo [<string|$name> [<string|$name>...]] - - Copy the sequence of strings and expanded environment variables to - console out (or to a file if the output is re-directed). - -o exec <hex-address> - - Execute the user logic at address <hex-address>. NSH will pause - until the execution unless the user logic is executed in background - via 'exec <hex-address> &' - -o exit - - Exit NSH. Only useful if you have started some other tasks (perhaps - using the 'exec' command') and you would like to have NSH out of the - way. - -o free - - Show the current state of the memory allocator. For example, - - nsh> free - free - total used free largest - Mem: 4194288 1591552 2602736 2601584 - - Where: - total - This is the total size of memory allocated for use - by malloc in bytes. - used - This is the total size of memory occupied by - chunks handed out by malloc. - free - This is the total size of memory occupied by - free (not in use) chunks. - largest - Size of the largest free (not in use) chunk - -o get [-b|-n] [-f <local-path>] -h <ip-address> <remote-path> - - Use TFTP to copy the file at <remote-address> from the host whose IP - address is identified by <ip-address>. Other options: - - -f <local-path> - The file will be saved relative to the current working directory - unless <local-path> is provided. - -b|-n - Selects either binary ("octect") or test ("netascii") transfer - mode. Default: text. - -o help [-v] [<cmd>] - - Presents summary information about NSH commands to console. Options: - - -v - Show verbose output will full command usage - - <cmd> - Show full command usage only for this command - -o hexdump <file or device> - - Dump data in hexadecimal format from a file or character device. - -o ifconfig [nic_name [<ip-address>|dhcp]] [dr|gw|gateway <dr-address>] [netmask <net-mask>] [dns <dns-address>] [hw <hw-mac>] - - Show the current configuration of the network, for example: - - nsh> ifconfig - eth0 HWaddr 00:18:11:80:10:06 - IPaddr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0 - - if uIP statistics are enabled (CONFIG_NET_STATISTICS), then - this command will also show the detailed state of uIP. - -o ifdown <nic-name> - - Take down the interface identified by the name <nic-name>. - - Example: - - ifdown eth0 - -o ifup <nic-name> - - Bring up down the interface identified by the name <nic-name>. - - Example: - - ifup eth0 - -o kill -<signal> <pid> - - Send the <signal> to the task identified by <pid>. - -o losetup [-d <dev-path>] | [[-o <offset>] [-r] <ldev-path> <file-path>] - - Setup or teardown the loop device: - - 1. Teardown the setup for the loop device at <dev-path>: - - losetup d <dev-path> - - 2. Setup the loop device at <dev-path> to access the file at <file-path> - as a block device: - - losetup [-o <offset>] [-r] <dev-path> <file-path> - - Example: - - nsh> dd if=/dev/zero of=/tmp/image bs=512 count=512 - nsh> ls -l /tmp - /tmp: - -rw-rw-rw- 262144 IMAGE - nsh> losetup /dev/loop0 /tmp/image - nsh> ls -l /dev - /dev: - brw-rw-rw- 0 loop0 - nsh> mkfatfs /dev/loop0 - nsh> mount -t vfat /dev/loop0 /mnt/example - nsh> ls -l /mnt - ls -l /mnt - /mnt: - drw-rw-rw- 0 example/ - nsh> echo "This is a test" >/mnt/example/atest.txt - nsh> ls -l /mnt/example - /mnt/example: - -rw-rw-rw- 16 ATEST.TXT - nsh> cat /mnt/example/atest.txt - This is a test - nsh> - -o ls [-lRs] <dir-path> - - Show the contents of the directory at <dir-path>. NOTE: - <dir-path> must refer to a directory and no other filesystem - object. - - Options: - -------- - - -R Show the constents of specified directory and all of its - sub-directories. - -s Show the size of the files along with the filenames in the - listing - -l Show size and mode information along with the filenames - in the listing. - -o md5 [-f] <string or filepath> - -o mb <hex-address>[=<hex-value>][ <hex-byte-count>] -o mh <hex-address>[=<hex-value>][ <hex-byte-count>] -o mw <hex-address>[=<hex-value>][ <hex-byte-count>] - - Access memory using byte size access (mb), 16-bit accesses (mh), - or 32-bit access (mw). In each case, - - <hex-address>. Specifies the address to be accessed. The current - value at that address will always be read and displayed. - <hex-address>=<hex-value>. Read the value, then write <hex-value> - to the location. - <hex-byte-count>. Perform the mb, mh, or mw operation on a total - of <hex-byte-count> bytes, increment the <hex-address> appropriately - after each access - - Example - - nsh> mh 0 16 - 0 = 0x0c1e - 2 = 0x0100 - 4 = 0x0c1e - 6 = 0x0110 - 8 = 0x0c1e - a = 0x0120 - c = 0x0c1e - e = 0x0130 - 10 = 0x0c1e - 12 = 0x0140 - 14 = 0x0c1e - nsh> - -o mkdir <path> - - Create the directory at <path>. All components of of <path> - except the final directory name must exist on a mounted file - system; the final directory must not. - - Recall that NuttX uses a pseudo filesystem for its root file system. - The mkdir command can only be used to create directories in volumes - set up with the mount command; it cannot be used to create directories - in the pseudo filesystem. - - Example: - ^^^^^^^^ - - nsh> mkdir /mnt/fs/tmp - nsh> ls -l /mnt/fs - /mnt/fs: - drw-rw-rw- 0 TESTDIR/ - drw-rw-rw- 0 TMP/ - nsh> - -o mkfatfs <path> - - Format a fat file system on the block device specified by path. - NSH provides this command to access the mkfatfs() NuttX API. - This block device must reside in the NuttX pseudo filesystem and - must have been created by some call to register_blockdriver() (see - include/nuttx/fs/fs.h). - -o mkfifo <path> - - Creates a FIFO character device anywhere in the pseudo file system, - creating whatever pseudo directories that may be needed to complete - the full path. By convention, however, device drivers are place in - the standard /dev directory. After it is created, the FIFO device - may be used as any other device driver. NSH provides this command - to access the mkfifo() NuttX API. - - Example: - ^^^^^^^^ - - nsh> ls -l /dev - /dev: - crw-rw-rw- 0 console - crw-rw-rw- 0 null - brw-rw-rw- 0 ram0 - nsh> mkfifo /dev/fifo - nsh> ls -l /dev - ls -l /dev - /dev: - crw-rw-rw- 0 console - crw-rw-rw- 0 fifo - crw-rw-rw- 0 null - brw-rw-rw- 0 ram0 - nsh> - -o mkrd [-m <minor>] [-s <sector-size>] <nsectors> - - Create a ramdisk consisting of <nsectors>, each of size - <sector-size> (or 512 bytes if <sector-size> is not specified. - The ramdisk will be registered as /dev/ram<n> (if <n> is not - specified, mkrd will attempt to register the ramdisk as - /dev/ram0. - - Example: - ^^^^^^^^ - - nsh> ls /dev - /dev: - console - null - ttyS0 - ttyS1 - nsh> mkrd 1024 - nsh> ls /dev - /dev: - console - null - ram0 - ttyS0 - ttyS1 - nsh> - - Once the ramdisk has been created, it may be formatted using - the mkfatfs command and mounted using the mount command. - - Example: - ^^^^^^^^ - nsh> mkrd 1024 - nsh> mkfatfs /dev/ram0 - nsh> mount -t vfat /dev/ram0 /tmp - nsh> ls /tmp - /tmp: - nsh> - -o mount [-t <fstype> <block-device> <dir-path>] - - The mount command performs one of two different operations. If no - paramters are provided on the command line after the mount command, - then the 'mount' command will enumerate all of the current - mountpoints on the console. - - If the mount parameters are provied on the command after the 'mount' - command, then the 'mount' command will mount a file system in the - NuttX pseudo-file system. 'mount' performs a three way association, - binding: - - File system. The '-t <fstype>' option identifies the type of - file system that has been formatted on the <block-device>. As - of this writing, vfat is the only supported value for <fstype> - - Block Device. The <block-device> argument is the full or relative - path to a block driver inode in the pseudo filesystem. By convention, - this is a name under the /dev sub-directory. This <block-device> - must have been previously formatted with the same file system - type as specified by <fstype> - - Mount Point. The mount point is the location in the pseudo file - system where the mounted volume will appear. This mount point - can only reside in the NuttX pseudo filesystem. By convention, this - mount point is a subdirectory under /mnt. The mount command will - create whatever pseudo directories that may be needed to complete - the full path but the full path must not already exist. - - After the volume has been mounted in the NuttX pseudo file - system, it may be access in the same way as other objects in the - file system. - - Examples: - ^^^^^^^^^ - - nsh> ls -l /dev - /dev: - crw-rw-rw- 0 console - crw-rw-rw- 0 null - brw-rw-rw- 0 ram0 - nsh> ls /mnt - nsh: ls: no such directory: /mnt - nsh> mount -t vfat /dev/ram0 /mnt/fs - nsh> ls -l /mnt/fs/testdir - /mnt/fs/testdir: - -rw-rw-rw- 15 TESTFILE.TXT - nsh> echo "This is a test" >/mnt/fs/testdir/example.txt - nsh> ls -l /mnt/fs/testdir - /mnt/fs/testdir: - -rw-rw-rw- 15 TESTFILE.TXT - -rw-rw-rw- 16 EXAMPLE.TXT - nsh> cat /mnt/fs/testdir/example.txt - This is a test - nsh> - - nsh> mount - /etc type romfs - /tmp type vfat - /mnt/fs type vfat - -o mv <old-path> <new-path> - - Rename the file object at <old-path> to <new-path>. Both paths must - reside in the same mounted filesystem. - -o nfsmount <server-address> <mount-point> <remote-path> - - Mount the remote NFS server directory <remote-path> at <mount-point> on the target machine. - <server-address> is the IP address of the remote server. - -o ps - - Show the currently active threads and tasks. For example, - - nsh> ps - PID PRI SCHD TYPE NP STATE NAME - 0 0 FIFO TASK READY Idle Task() - 1 128 RR TASK RUNNING init() - 2 128 FIFO TASK WAITSEM nsh_telnetmain() - 3 100 RR PTHREAD WAITSEM <pthread>(21) - nsh> - -o ping [-c <count>] [-i <interval>] <ip-address> - - Test the network communication with a remote peer. Example, - - nsh> 10.0.0.1 - PING 10.0.0.1 56 bytes of data - 56 bytes from 10.0.0.1: icmp_seq=1 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=2 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=3 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=4 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=5 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=6 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=7 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=8 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=9 time=0 ms - 56 bytes from 10.0.0.1: icmp_seq=10 time=0 ms - 10 packets transmitted, 10 received, 0% packet loss, time 10190 ms - nsh> - -o put [-b|-n] [-f <remote-path>] -h <ip-address> <local-path> - - Copy the file at <local-address> to the host whose IP address is - identified by <ip-address>. Other options: - - -f <remote-path> - The file will be saved with the same name on the host unless - unless <local-path> is provided. - -b|-n - Selects either binary ("octect") or test ("netascii") transfer - mode. Default: text. - -o pwd - - Show the current working directory. - - nsh> cd /dev - nsh> pwd - /dev - nsh> - - Same as 'echo $PWD' - - nsh> echo $PWD - /dev - nsh> - -o rm <file-path> - - Remove the specified <file-path> name from the mounted file system. - Recall that NuttX uses a pseudo filesystem for its root file system. - The rm command can only be used to remove (unlink) files in volumes - set up with the mount command; it cannot be used to remove names from - the pseudo filesystem. - - Example: - ^^^^^^^^ - - nsh> ls /mnt/fs/testdir - /mnt/fs/testdir: - TESTFILE.TXT - EXAMPLE.TXT - nsh> rm /mnt/fs/testdir/example.txt - nsh> ls /mnt/fs/testdir - /mnt/fs/testdir: - TESTFILE.TXT - nsh> - -o rmdir <dir-path> - - Remove the specified <dir-path> directory from the mounted file system. - Recall that NuttX uses a pseudo filesystem for its root file system. The - rmdir command can only be used to remove directories from volumes set up - with the mount command; it cannot be used to remove directories from the - pseudo filesystem. - - Example: - ^^^^^^^^ - - nsh> mkdir /mnt/fs/tmp - nsh> ls -l /mnt/fs - /mnt/fs: - drw-rw-rw- 0 TESTDIR/ - drw-rw-rw- 0 TMP/ - nsh> rmdir /mnt/fs/tmp - nsh> ls -l /mnt/fs - ls -l /mnt/fs - /mnt/fs: - drw-rw-rw- 0 TESTDIR/ - nsh> - -o set <name> <value> - - Set the environment variable <name> to the sting <value>. - For example, - - nsh> echo $foobar - - nsh> set foobar foovalue - nsh> echo $foobar - foovalue - nsh> - -o sh <script-path> - - Execute the sequence of NSH commands in the file referred - to by <script-path>. - -o sleep <sec> - - Pause execution (sleep) of <sec> seconds. - -o unset <name> - - Remove the value associated with the environment variable - <name>. Example: - - nsh> echo $foobar - foovalue - nsh> unset foobar - nsh> echo $foobar - - nsh> - - o urldecode [-f] <string or filepath> - - o urlencode [-f] <string or filepath> - -o usleep <usec> - - Pause execution (sleep) of <usec> microseconds. - -o wget [-o <local-path>] <url> - - Use HTTP to copy the file at <url> to the current directory. - Options: - - -o <local-path> - The file will be saved relative to the current working directory - and with the same name as on the HTTP server unless <local-path> - is provided. - -o xd <hex-address> <byte-count> - - Dump <byte-count> bytes of data from address <hex-address> - - Example: - ^^^^^^^^ - - nsh> xd 410e0 512 - Hex dump: - 0000: 00 00 00 00 9c 9d 03 00 00 00 00 01 11 01 10 06 ................ - 0010: 12 01 11 01 25 08 13 0b 03 08 1b 08 00 00 02 24 ....%..........$ - ... - 01f0: 08 3a 0b 3b 0b 49 13 00 00 04 13 01 01 13 03 08 .:.;.I.......... - nsh> - -NSH Configuration Settings -^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The availability of the above commands depends upon features that -may or may not be enabled in the NuttX configuration file. The -following table indicates the dependency of each command on NuttX -configuration settings. General configuration settings are discussed -in the NuttX Porting Guide. Configuration settings specific to NSH -as discussed at the bottom of this README file. - -Command Dependencies on Configuration Settings -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - Command Depends on Configuration - ---------- -------------------------- - [ !CONFIG_NSH_DISABLESCRIPT - base64dec CONFIG_NETUTILS_CODECS && CONFIG_CODECS_BASE64 - base64enc CONFIG_NETUTILS_CODECS && CONFIG_CODECS_BASE64 - cat CONFIG_NFILE_DESCRIPTORS > 0 - cd !CONFIG_DISABLE_ENVIRON && CONFIG_NFILE_DESCRIPTORS > 0 - cp CONFIG_NFILE_DESCRIPTORS > 0 - dd CONFIG_NFILE_DESCRIPTORS > 0 - df !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_READABLE (see note 3) - echo -- - exec -- - exit -- - free -- - get CONFIG_NET && CONFIG_NET_UDP && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NET_BUFSIZE >= 558 (see note 1) - help -- - hexdump CONFIG_NFILE_DESCRIPTORS > 0 - ifconfig CONFIG_NET - ifdown CONFIG_NET - ifup CONFIG_NET - kill !CONFIG_DISABLE_SIGNALS - losetup !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 - ls CONFIG_NFILE_DESCRIPTORS > 0 - md5 CONFIG_NETUTILS_CODECS && CONFIG_CODECS_HASH_MD5 - mb,mh,mw --- - mkdir !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_WRITABLE (see note 4) - mkfatfs !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_FAT - mkfifo CONFIG_NFILE_DESCRIPTORS > 0 - mkrd !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_WRITABLE (see note 4) - mount !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_READABLE (see note 3) - mv !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_WRITABLE (see note 4) - nfsmount !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NET && CONFIG_NFS - ping CONFIG_NET && CONFIG_NET_ICMP && CONFIG_NET_ICMP_PING && !CONFIG_DISABLE_CLOCK && !CONFIG_DISABLE_SIGNALS - ps -- - put CONFIG_NET && CONFIG_NET_UDP && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NET_BUFSIZE >= 558 (see note 1,2) - pwd !CONFIG_DISABLE_ENVIRON && CONFIG_NFILE_DESCRIPTORS > 0 - rm !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_WRITABLE (see note 4) - rmdir !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_WRITABLE (see note 4) - set !CONFIG_DISABLE_ENVIRON - sh CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NFILE_STREAMS > 0 && !CONFIG_NSH_DISABLESCRIPT - sleep !CONFIG_DISABLE_SIGNALS - test !CONFIG_NSH_DISABLESCRIPT - umount !CONFIG_DISABLE_MOUNTPOINT && CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_FS_READABLE - unset !CONFIG_DISABLE_ENVIRON - urldecode CONFIG_NETUTILS_CODECS && CONFIG_CODECS_URLCODE - urlencode CONFIG_NETUTILS_CODECS && CONFIG_CODECS_URLCODE - usleep !CONFIG_DISABLE_SIGNALS - get CONFIG_NET && CONFIG_NET_TCP && CONFIG_NFILE_DESCRIPTORS > 0 - xd --- - -* NOTES: - 1. Because of hardware padding, the actual buffersize required for put and get - operations size may be larger. - 2. Special TFTP server start-up optionss will probably be required to permit - creation of file for the correct operation of the put command. - 3. CONFIG_FS_READABLE is not a user configuration but is set automatically - if any readable filesystem is selected. At present, this is either CONFIG_FS_FAT - and CONFIG_FS_ROMFS. - 4. CONFIG_FS_WRITABLE is not a user configuration but is set automatically - if any writable filesystem is selected. At present, this is only CONFIG_FS_FAT. - -In addition, each NSH command can be individually disabled via one of the following -settings. All of these settings make the configuration of NSH potentially complex but -also allow it to squeeze into very small memory footprints. - - CONFIG_NSH_DISABLE_BASE64DEC, CONFIG_NSH_DISABLE_BASE64ENC, CONFIG_NSH_DISABLE_CAT, - CONFIG_NSH_DISABLE_CD, CONFIG_NSH_DISABLE_CP, CONFIG_NSH_DISABLE_DD, - CONFIG_NSH_DISABLE_DF, CONFIG_NSH_DISABLE_ECHO, CONFIG_NSH_DISABLE_EXEC, - CONFIG_NSH_DISABLE_EXIT, CONFIG_NSH_DISABLE_FREE, CONFIG_NSH_DISABLE_GET, - CONFIG_NSH_DISABLE_HELP, CONFIG_NSH_DISABLE_HEXDUMP, CONFIG_NSH_DISABLE_IFCONFIG, - CONFIG_NSH_DISABLE_IFUPDOWN, CONFIG_NSH_DISABLE_KILL, CONFIG_NSH_DISABLE_LOSETUP, - CONFIG_NSH_DISABLE_LS, CONFIG_NSH_DISABLE_MD5 CONFIG_NSH_DISABLE_MB, - CONFIG_NSH_DISABLE_MKDIR, CONFIG_NSH_DISABLE_MKFATFS, CONFIG_NSH_DISABLE_MKFIFO, - CONFIG_NSH_DISABLE_MKRD, CONFIG_NSH_DISABLE_MH, CONFIG_NSH_DISABLE_MOUNT, - CONFIG_NSH_DISABLE_MW, CONFIG_NSH_DISABLE_MV, CONFIG_NSH_DISABLE_NFSMOUNT, - CONFIG_NSH_DISABLE_PS, CONFIG_NSH_DISABLE_PING, CONFIG_NSH_DISABLE_PUT, - CONFIG_NSH_DISABLE_PWD, CONFIG_NSH_DISABLE_RM, CONFIG_NSH_DISABLE_RMDIR, - CONFIG_NSH_DISABLE_SET, CONFIG_NSH_DISABLE_SH, CONFIG_NSH_DISABLE_SLEEP, - CONFIG_NSH_DISABLE_TEST, CONFIG_NSH_DISABLE_UMOUNT, CONFIG_NSH_DISABLE_UNSET, - CONFIG_NSH_DISABLE_URLDECODE, CONFIG_NSH_DISABLE_URLENCODE, CONFIG_NSH_DISABLE_USLEEP, - CONFIG_NSH_DISABLE_WGET, CONFIG_NSH_DISABLE_XD - -Verbose help output can be suppressed by defining CONFIG_NSH_HELP_TERSE. In that -case, the help command is still available but will be slightly smaller. - -NSH-Specific Configuration Settings -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - The behavior of NSH can be modified with the following settings in - the configs/<board-name>/defconfig file: - - * CONFIG_NSH_BUILTIN_APPS - Support external registered, "builtin" applications that can be - executed from the NSH command line (see apps/README.txt for - more information). - - * CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer used for file access (ignored if - there is no filesystem). Default is 1024. - - * CONFIG_NSH_STRERROR - strerror(errno) makes more readable output but strerror() is - very large and will not be used unless this setting is 'y'. - This setting depends upon the strerror() having been enabled - with CONFIG_LIBC_STRERROR. - - * CONFIG_NSH_LINELEN - The maximum length of one command line and of one output line. - Default: 80 - - * CONFIG_NSH_NESTDEPTH - The maximum number of nested if-then[-else]-fi sequences that - are permissable. Default: 3 - - * CONFIG_NSH_DISABLESCRIPT - This can be set to 'y' to suppress support for scripting. This - setting disables the 'sh', 'test', and '[' commands and the - if-then[-else]-fi construct. This would only be set on systems - where a minimal footprint is a necessity and scripting is not. - - * CONFIG_NSH_DISABLEBG - This can be set to 'y' to suppress support for background - commands. This setting disables the 'nice' command prefix and - the '&' command suffix. This would only be set on systems - where a minimal footprint is a necessity and background command - execution is not. - - * CONFIG_NSH_MMCSDMINOR - If the architecture supports an MMC/SD slot and if the NSH - architecture specific logic is present, this option will provide - the MMC/SD minor number, i.e., the MMC/SD block driver will - be registered as /dev/mmcsdN where N is the minor number. - Default is zero. - - * CONFIG_NSH_ROMFSETC - Mount a ROMFS filesystem at /etc and provide a startup script - at /etc/init.d/rcS. The default startup script will mount - a FAT FS RAMDISK at /tmp but the logic is easily extensible. - - * CONFIG_NSH_CONSOLE - If CONFIG_NSH_CONSOLE is set to 'y', then a serial - console front-end is selected. - - Normally, the serial console device is a UART and RS-232 - interface. However, if CONFIG_USBDEV is defined, then a USB - serial device may, instead, be used if the one of - the following are defined: - - CONFIG_PL2303 and CONFIG_PL2303_CONSOLE - Sets up the - Prolifics PL2303 emulation as a console device - at /dev/console. - - CONFIG_CDCACM and CONFIG_CDCACM_CONSOLE - Sets up the - CDC/ACM serial device as a console device at - dev/console. - - CONFIG_NSH_USBCONSOLE - If defined, then the an arbitrary USB device may be used - to as the NSH console. In this case, CONFIG_NSH_USBCONDEV - must be defined to indicate which USB device to use as - the console. - - CONFIG_NSH_USBCONDEV - If CONFIG_NSH_USBCONSOLE is set to 'y', then CONFIG_NSH_USBCONDEV - must also be set to select the USB device used to support - the NSH console. This should be set to the quoted name of a - readable/write-able USB driver such as: - CONFIG_NSH_USBCONDEV="/dev/ttyACM0". - - If there are more than one USB devices, then a USB device - minor number may also need to be provided: - - CONFIG_NSH_USBDEV_MINOR - The minor device number of the USB device. Default: 0 - - CONFIG_NSH_USBDEV_TRACE - If USB tracing is enabled (CONFIG_USBDEV_TRACE), then NSH can - be configured to show the buffered USB trace data afer each - NSH command: - - If CONFIG_NSH_USBDEV_TRACE is selected, then USB trace data - can be filtered as follows. Default: Only USB errors are traced. - - CONFIG_NSH_USBDEV_TRACEINIT - Show initialization events - CONFIG_NSH_USBDEV_TRACECLASS - Show class driver events - CONFIG_NSH_USBDEV_TRACETRANSFERS - Show data transfer events - CONFIG_NSH_USBDEV_TRACECONTROLLER - Show controller events - CONFIG_NSH_USBDEV_TRACEINTERRUPTS - Show interrupt-related events. - - * CONFIG_NSH_CONDEV - If CONFIG_NSH_CONSOLE is set to 'y', then CONFIG_NSH_CONDEV - may also be set to select the serial device used to support - the NSH console. This should be set to the quoted name of a - readable/write-able character driver such as: - CONFIG_NSH_CONDEV="/dev/ttyS1". This is useful, for example, - to separate the NSH command line from the system console when - the system console is used to provide debug output. Default: - stdin and stdout (probably "/dev/console") - - NOTE: When any other device other than /dev/console is used - for a user interface, (1) linefeeds (\n) will not be expanded to - carriage return / linefeeds (\r\n). You will need to set - your terminal program to account for this. And (2) input is - not automatically echoed so you will have to turn local echo on. - - * CONFIG_NSH_TELNET - If CONFIG_NSH_TELNET is set to 'y', then a TELENET - server front-end is selected. When this option is provided, - you may log into NuttX remotely using telnet in order to - access NSH. - - * CONFIG_NSH_ARCHINIT - Set if your board provides architecture specific initialization - via the board-specific function nsh_archinitialize(). This - function will be called early in NSH initialization to allow - board logic to do such things as configure MMC/SD slots. - - If Telnet is selected for the NSH console, then we must configure - the resources used by the Telnet daemon and by the Telnet clients. - - * CONFIG_NSH_TELNETD_PORT - The telnet daemon will listen on this - TCP port number for connections. Default: 23 - - * CONFIG_NSH_TELNETD_DAEMONPRIO - Priority of the Telnet daemon. - Default: SCHED_PRIORITY_DEFAULT - - * CONFIG_NSH_TELNETD_DAEMONSTACKSIZE - Stack size allocated for the - Telnet daemon. Default: 2048 - - * CONFIG_NSH_TELNETD_CLIENTPRIO- Priority of the Telnet client. - Default: SCHED_PRIORITY_DEFAULT - - * CONFIG_NSH_TELNETD_CLIENTSTACKSIZE - Stack size allocated for the - Telnet client. Default: 2048 - - One or both of CONFIG_NSH_CONSOLE and CONFIG_NSH_TELNET - must be defined. If CONFIG_NSH_TELNET is selected, then there some - other configuration settings that apply: - - * CONFIG_NET=y - Of course, networking must be enabled - - * CONFIG_NSOCKET_DESCRIPTORS - And, of course, you must allocate some socket descriptors. - - * CONFIG_NET_TCP=y - TCP/IP support is required for telnet (as well as various other TCP-related - configuration settings). - - * CONFIG_NSH_IOBUFFER_SIZE - Determines the size of the I/O buffer to use for sending/ - receiving TELNET commands/reponses - - * CONFIG_NSH_DHCPC - Obtain the IP address via DHCP. - - * CONFIG_NSH_IPADDR - If CONFIG_NSH_DHCPC is NOT set, then the static IP - address must be provided. - - * CONFIG_NSH_DRIPADDR - Default router IP address - - * CONFIG_NSH_NETMASK - Network mask - - * CONFIG_NSH_NOMAC - Set if your ethernet hardware has no built-in MAC address. - If set, a bogus MAC will be assigned. - - * CONFIG_NSH_MAX_ROUNDTRIP - This is the maximum round trip for a response to a ICMP ECHO request. - It is in units of deciseconds. The default is 20 (2 seconds). - - If you use DHCPC, then some special configuration network options are - required. These include: - - * CONFIG_NET=y - Of course, networking must be enabled - - * CONFIG_NSOCKET_DESCRIPTORS - And, of course, you must allocate some socket descriptors. - - * CONFIG_NET_UDP=y - UDP support is required for DHCP (as well as various other UDP-related - configuration settings) - - * CONFIG_NET_BROADCAST=y - UDP broadcast support is needed. - - * CONFIG_NET_BUFSIZE=650 (or larger) - Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP - messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS). - - If CONFIG_NSH_ROMFSETC is selected, then the following additional - configuration setting apply: - - * CONFIG_NSH_ROMFSMOUNTPT - The default mountpoint for the ROMFS volume is /etc, but that - can be changed with this setting. This must be a absolute path - beginning with '/'. - - * CONFIG_NSH_INITSCRIPT - This is the relative path to the startup script within the mountpoint. - The default is init.d/rcS. This is a relative path and must not - start with '/'. - - * CONFIG_NSH_ROMFSDEVNO - This is the minor number of the ROMFS block device. The default is - '0' corresponding to /dev/ram0. - - * CONFIG_NSH_ROMFSSECTSIZE - This is the sector size to use with the ROMFS volume. Since the - default volume is very small, this defaults to 64 but should be - increased if the ROMFS volume were to be become large. Any value - selected must be a power of 2. - - When the default rcS file used when CONFIG_NSH_ROMFSETC is - selected, it will mount a FAT FS under /tmp. The following selections - describe that FAT FS. - - * CONFIG_NSH_FATDEVNO - This is the minor number of the FAT FS block device. The default is - '1' corresponding to /dev/ram1. - - * CONFIG_NSH_FATSECTSIZE - This is the sector size use with the FAT FS. Default is 512. - - * CONFIG_NSH_FATNSECTORS - This is the number of sectors to use with the FAT FS. Defalt is - 1024. The amount of memory used by the FAT FS will be - CONFIG_NSH_FATSECTSIZE * CONFIG_NSH_FATNSECTORS - bytes. - - * CONFIG_NSH_FATMOUNTPT - This is the location where the FAT FS will be mounted. Default - is /tmp. - -Common Problems -^^^^^^^^^^^^^^^ - - Problem: - Using NSH over serial, the "nsh>" prompt repeats over and over again - with no serial input. - Usual Cause: - NSH over serial needs to use the interrupt driven serial driver - (drivers/serial/serial.c) not the polled serial driver (drivers/serial/lowconsole.c). - Make sure that the polled console is disabled in the OS configuration - file, .config. That file should have CONFIG_DEV_LOWCONSOLE=n for - NSH over serial. - - Problem: - The function 'readline' is undefined. - Usual Cause: - The following is missing from your appconfig file: - - CONFIGURED_APPS += system/readline - |