diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2013-04-27 00:13:03 +0200 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2013-04-27 00:13:03 +0200 |
commit | 0c4b8a54c7779d198e016470889456b3458e2303 (patch) | |
tree | ed7dc20117e3dfe873efacf618e93207409d6c14 /apps/systemcmds | |
parent | 63136e354330bcf8efe2757187515eeaa8bc3bcb (diff) | |
download | px4-firmware-0c4b8a54c7779d198e016470889456b3458e2303.tar.gz px4-firmware-0c4b8a54c7779d198e016470889456b3458e2303.tar.bz2 px4-firmware-0c4b8a54c7779d198e016470889456b3458e2303.zip |
Deleted old-style EEPROM driver, new one is already functional
Diffstat (limited to 'apps/systemcmds')
-rw-r--r-- | apps/systemcmds/eeprom/24xxxx_mtd.c | 571 | ||||
-rw-r--r-- | apps/systemcmds/eeprom/Makefile | 45 | ||||
-rw-r--r-- | apps/systemcmds/eeprom/eeprom.c | 265 |
3 files changed, 0 insertions, 881 deletions
diff --git a/apps/systemcmds/eeprom/24xxxx_mtd.c b/apps/systemcmds/eeprom/24xxxx_mtd.c deleted file mode 100644 index e34be44e3..000000000 --- a/apps/systemcmds/eeprom/24xxxx_mtd.c +++ /dev/null @@ -1,571 +0,0 @@ -/************************************************************************************ - * Driver for 24xxxx-style I2C EEPROMs. - * - * Adapted from: - * - * drivers/mtd/at24xx.c - * Driver for I2C-based at24cxx EEPROM(at24c32,at24c64,at24c128,at24c256) - * - * Copyright (C) 2011 Li Zhuoyi. All rights reserved. - * Author: Li Zhuoyi <lzyy.cn@gmail.com> - * History: 0.1 2011-08-20 initial version - * - * 2011-11-1 Added support for larger MTD block sizes: Hal Glenn <hglenn@2g-eng.com> - * - * Derived from drivers/mtd/m25px.c - * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <stdlib.h> -#include <unistd.h> -#include <string.h> -#include <errno.h> -#include <debug.h> - -#include <nuttx/kmalloc.h> -#include <nuttx/fs/ioctl.h> -#include <nuttx/i2c.h> -#include <nuttx/mtd.h> - -#include "systemlib/perf_counter.h" - -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ - -/* - * Configuration is as for the AT24 driver, but the CONFIG_MTD_AT24XX define should be - * omitted in order to avoid building the AT24XX driver as well. - */ - -/* As a minimum, the size of the AT24 part and its 7-bit I2C address are required. */ - -#ifndef CONFIG_AT24XX_SIZE -# warning "Assuming AT24 size 64" -# define CONFIG_AT24XX_SIZE 64 -#endif -#ifndef CONFIG_AT24XX_ADDR -# warning "Assuming AT24 address of 0x50" -# define CONFIG_AT24XX_ADDR 0x50 -#endif - -/* Get the part configuration based on the size configuration */ - -#if CONFIG_AT24XX_SIZE == 32 -# define AT24XX_NPAGES 128 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 48 -# define AT24XX_NPAGES 192 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 64 -# define AT24XX_NPAGES 256 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 128 -# define AT24XX_NPAGES 256 -# define AT24XX_PAGESIZE 64 -#elif CONFIG_AT24XX_SIZE == 256 -# define AT24XX_NPAGES 512 -# define AT24XX_PAGESIZE 64 -#endif - -/* For applications where a file system is used on the AT24, the tiny page sizes - * will result in very inefficient FLASH usage. In such cases, it is better if - * blocks are comprised of "clusters" of pages so that the file system block - * size is, say, 256 or 512 bytes. In any event, the block size *must* be an - * even multiple of the pages. - */ - -#ifndef CONFIG_AT24XX_MTD_BLOCKSIZE -# warning "Assuming driver block size is the same as the FLASH page size" -# define CONFIG_AT24XX_MTD_BLOCKSIZE AT24XX_PAGESIZE -#endif - -/* The AT24 does not respond on the bus during write cycles, so we depend on a long - * timeout to detect problems. The max program time is typically ~5ms. - */ -#ifndef CONFIG_AT24XX_WRITE_TIMEOUT_MS -# define CONFIG_AT24XX_WRITE_TIMEOUT_MS 20 -#endif - -/************************************************************************************ - * Private Types - ************************************************************************************/ - -/* This type represents the state of the MTD device. The struct mtd_dev_s - * must appear at the beginning of the definition so that you can freely - * cast between pointers to struct mtd_dev_s and struct at24c_dev_s. - */ - -struct at24c_dev_s { - struct mtd_dev_s mtd; /* MTD interface */ - FAR struct i2c_dev_s *dev; /* Saved I2C interface instance */ - uint8_t addr; /* I2C address */ - uint16_t pagesize; /* 32, 63 */ - uint16_t npages; /* 128, 256, 512, 1024 */ - - perf_counter_t perf_reads; - perf_counter_t perf_writes; - perf_counter_t perf_resets; - perf_counter_t perf_read_retries; - perf_counter_t perf_read_errors; - perf_counter_t perf_write_errors; -}; - -/************************************************************************************ - * Private Function Prototypes - ************************************************************************************/ - -/* MTD driver methods */ - -static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); -static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR uint8_t *buf); -static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR const uint8_t *buf); -static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); - -void at24c_test(void); - -/************************************************************************************ - * Private Data - ************************************************************************************/ - -/* At present, only a single AT24 part is supported. In this case, a statically - * allocated state structure may be used. - */ - -static struct at24c_dev_s g_at24c; - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -static int at24c_eraseall(FAR struct at24c_dev_s *priv) -{ - int startblock = 0; - uint8_t buf[AT24XX_PAGESIZE + 2]; - - struct i2c_msg_s msgv[1] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - - memset(&buf[2], 0xff, priv->pagesize); - - for (startblock = 0; startblock < priv->npages; startblock++) { - uint16_t offset = startblock * priv->pagesize; - buf[1] = offset & 0xff; - buf[0] = (offset >> 8) & 0xff; - - while (I2C_TRANSFER(priv->dev, &msgv[0], 1) < 0) { - fvdbg("erase stall\n"); - usleep(10000); - } - } - - return OK; -} - -/************************************************************************************ - * Name: at24c_erase - ************************************************************************************/ - -static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) -{ - /* EEprom need not erase */ - - return (int)nblocks; -} - -/************************************************************************************ - * Name: at24c_test - ************************************************************************************/ - -void at24c_test(void) -{ - uint8_t buf[CONFIG_AT24XX_MTD_BLOCKSIZE]; - unsigned count = 0; - unsigned errors = 0; - - for (count = 0; count < 10000; count++) { - ssize_t result = at24c_bread(&g_at24c.mtd, 0, 1, buf); - if (result == ERROR) { - if (errors++ > 2) { - vdbg("too many errors\n"); - return; - } - } else if (result != 1) { - vdbg("unexpected %u\n", result); - } - if ((count % 100) == 0) - vdbg("test %u errors %u\n", count, errors); - } -} - -/************************************************************************************ - * Name: at24c_bread - ************************************************************************************/ - -static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR uint8_t *buffer) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - size_t blocksleft; - uint8_t addr[2]; - int ret; - - struct i2c_msg_s msgv[2] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &addr[0], - .length = sizeof(addr), - }, - { - .addr = priv->addr, - .flags = I2C_M_READ, - .buffer = 0, - .length = priv->pagesize, - } - }; - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); - nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#endif - blocksleft = nblocks; - - fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); - - if (startblock >= priv->npages) { - return 0; - } - - if (startblock + nblocks > priv->npages) { - nblocks = priv->npages - startblock; - } - - while (blocksleft-- > 0) { - uint16_t offset = startblock * priv->pagesize; - unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; - - addr[1] = offset & 0xff; - addr[0] = (offset >> 8) & 0xff; - msgv[1].buffer = buffer; - - for (;;) { - - perf_begin(priv->perf_reads); - ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); - - if (ret >= 0) - break; - - fvdbg("read stall"); - usleep(1000); - - /* We should normally only be here on the first read after - * a write. - * - * XXX maybe do special first-read handling with optional - * bus reset as well? - */ - perf_count(priv->perf_read_retries); - - if (--tries == 0) { - perf_count(priv->perf_read_errors); - return ERROR; - } - } - - startblock++; - buffer += priv->pagesize; - } - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#else - return nblocks; -#endif -} - -/************************************************************************************ - * Name: at24c_bwrite - * - * Operates on MTD block's and translates to FLASH pages - * - ************************************************************************************/ - -static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR const uint8_t *buffer) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - size_t blocksleft; - uint8_t buf[AT24XX_PAGESIZE + 2]; - int ret; - - struct i2c_msg_s msgv[1] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); - nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#endif - blocksleft = nblocks; - - if (startblock >= priv->npages) { - return 0; - } - - if (startblock + nblocks > priv->npages) { - nblocks = priv->npages - startblock; - } - - fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); - - while (blocksleft-- > 0) { - uint16_t offset = startblock * priv->pagesize; - unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; - - buf[1] = offset & 0xff; - buf[0] = (offset >> 8) & 0xff; - memcpy(&buf[2], buffer, priv->pagesize); - - for (;;) { - - perf_begin(priv->perf_writes); - ret = I2C_TRANSFER(priv->dev, &msgv[0], 1); - perf_end(priv->perf_writes); - - if (ret >= 0) - break; - - fvdbg("write stall"); - usleep(1000); - - /* We expect to see a number of retries per write cycle as we - * poll for write completion. - */ - if (--tries == 0) { - perf_count(priv->perf_write_errors); - return ERROR; - } - } - - startblock++; - buffer += priv->pagesize; - } - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#else - return nblocks; -#endif -} - -/************************************************************************************ - * Name: at24c_ioctl - ************************************************************************************/ - -static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - int ret = -EINVAL; /* Assume good command with bad parameters */ - - fvdbg("cmd: %d \n", cmd); - - switch (cmd) { - case MTDIOC_GEOMETRY: { - FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); - - if (geo) { - /* Populate the geometry structure with information need to know - * the capacity and how to access the device. - * - * NOTE: that the device is treated as though it where just an array - * of fixed size blocks. That is most likely not true, but the client - * will expect the device logic to do whatever is necessary to make it - * appear so. - * - * blocksize: - * May be user defined. The block size for the at24XX devices may be - * larger than the page size in order to better support file systems. - * The read and write functions translate BLOCKS to pages for the - * small flash devices - * erasesize: - * It has to be at least as big as the blocksize, bigger serves no - * purpose. - * neraseblocks - * Note that the device size is in kilobits and must be scaled by - * 1024 / 8 - */ - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - geo->blocksize = CONFIG_AT24XX_MTD_BLOCKSIZE; - geo->erasesize = CONFIG_AT24XX_MTD_BLOCKSIZE; - geo->neraseblocks = (CONFIG_AT24XX_SIZE * 1024 / 8) / CONFIG_AT24XX_MTD_BLOCKSIZE; -#else - geo->blocksize = priv->pagesize; - geo->erasesize = priv->pagesize; - geo->neraseblocks = priv->npages; -#endif - ret = OK; - - fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n", - geo->blocksize, geo->erasesize, geo->neraseblocks); - } - } - break; - - case MTDIOC_BULKERASE: - ret = at24c_eraseall(priv); - break; - - case MTDIOC_XIPBASE: - default: - ret = -ENOTTY; /* Bad command */ - break; - } - - return ret; -} - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: at24c_initialize - * - * Description: - * Create an initialize MTD device instance. MTD devices are not registered - * in the file system, but are created as instances that can be bound to - * other functions (such as a block or character driver front end). - * - ************************************************************************************/ - -FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev) { - FAR struct at24c_dev_s *priv; - - fvdbg("dev: %p\n", dev); - - /* Allocate a state structure (we allocate the structure instead of using - * a fixed, static allocation so that we can handle multiple FLASH devices. - * The current implementation would handle only one FLASH part per I2C - * device (only because of the SPIDEV_FLASH definition) and so would have - * to be extended to handle multiple FLASH parts on the same I2C bus. - */ - - priv = &g_at24c; - - if (priv) { - /* Initialize the allocated structure */ - - priv->addr = CONFIG_AT24XX_ADDR; - priv->pagesize = AT24XX_PAGESIZE; - priv->npages = AT24XX_NPAGES; - - priv->mtd.erase = at24c_erase; - priv->mtd.bread = at24c_bread; - priv->mtd.bwrite = at24c_bwrite; - priv->mtd.ioctl = at24c_ioctl; - priv->dev = dev; - - priv->perf_reads = perf_alloc(PC_ELAPSED, "EEPROM read"); - priv->perf_writes = perf_alloc(PC_ELAPSED, "EEPROM write"); - priv->perf_resets = perf_alloc(PC_COUNT, "EEPROM reset"); - priv->perf_read_retries = perf_alloc(PC_COUNT, "EEPROM read retries"); - priv->perf_read_errors = perf_alloc(PC_COUNT, "EEPROM read errors"); - priv->perf_write_errors = perf_alloc(PC_COUNT, "EEPROM write errors"); - } - - /* attempt to read to validate device is present */ - unsigned char buf[5]; - uint8_t addrbuf[2] = {0, 0}; - - struct i2c_msg_s msgv[2] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &addrbuf[0], - .length = sizeof(addrbuf), - }, - { - .addr = priv->addr, - .flags = I2C_M_READ, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - - perf_begin(priv->perf_reads); - int ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); - - if (ret < 0) { - return NULL; - } - - /* Return the implementation-specific state structure as the MTD device */ - - fvdbg("Return %p\n", priv); - return (FAR struct mtd_dev_s *)priv; -} - -/* - * XXX: debug hackery - */ -int at24c_nuke(void) -{ - return at24c_eraseall(&g_at24c); -} diff --git a/apps/systemcmds/eeprom/Makefile b/apps/systemcmds/eeprom/Makefile deleted file mode 100644 index 58c8cb5ec..000000000 --- a/apps/systemcmds/eeprom/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Build the eeprom tool. -# - -APPNAME = eeprom -PRIORITY = SCHED_PRIORITY_DEFAULT -STACKSIZE = 4096 -MAXOPTIMIZATION = -Os - -include $(APPDIR)/mk/app.mk - -MAXOPTIMIZATION = -Os diff --git a/apps/systemcmds/eeprom/eeprom.c b/apps/systemcmds/eeprom/eeprom.c deleted file mode 100644 index 49da51358..000000000 --- a/apps/systemcmds/eeprom/eeprom.c +++ /dev/null @@ -1,265 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file eeprom.c - * - * EEPROM service and utility app. - */ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/mount.h> -#include <sys/ioctl.h> -#include <sys/stat.h> - -#include <nuttx/i2c.h> -#include <nuttx/mtd.h> -#include <nuttx/fs/nxffs.h> -#include <nuttx/fs/ioctl.h> - -#include <arch/board/board.h> - -#include "systemlib/systemlib.h" -#include "systemlib/param/param.h" -#include "systemlib/err.h" - -#ifndef PX4_I2C_BUS_ONBOARD -# error PX4_I2C_BUS_ONBOARD not defined, cannot locate onboard EEPROM -#endif - -__EXPORT int eeprom_main(int argc, char *argv[]); - -static void eeprom_attach(void); -static void eeprom_start(void); -static void eeprom_erase(void); -static void eeprom_ioctl(unsigned operation); -static void eeprom_save(const char *name); -static void eeprom_load(const char *name); -static void eeprom_test(void); - -static bool attached = false; -static bool started = false; -static struct mtd_dev_s *eeprom_mtd; - -int eeprom_main(int argc, char *argv[]) -{ - if (argc >= 2) { - if (!strcmp(argv[1], "start")) - eeprom_start(); - - if (!strcmp(argv[1], "save_param")) - eeprom_save(argv[2]); - - if (!strcmp(argv[1], "load_param")) - eeprom_load(argv[2]); - - if (!strcmp(argv[1], "erase")) - eeprom_erase(); - - if (!strcmp(argv[1], "test")) - eeprom_test(); - - if (0) { /* these actually require a file on the filesystem... */ - - if (!strcmp(argv[1], "reformat")) - eeprom_ioctl(FIOC_REFORMAT); - - if (!strcmp(argv[1], "repack")) - eeprom_ioctl(FIOC_OPTIMIZE); - } - } - - errx(1, "expected a command, try 'start'\n\t'save_param /eeprom/parameters'\n\t'load_param /eeprom/parameters'\n\t'erase'\n"); -} - - -static void -eeprom_attach(void) -{ - /* find the right I2C */ - struct i2c_dev_s *i2c = up_i2cinitialize(PX4_I2C_BUS_ONBOARD); - /* this resets the I2C bus, set correct bus speed again */ - I2C_SETFREQUENCY(i2c, 400000); - - if (i2c == NULL) - errx(1, "failed to locate I2C bus"); - - /* start the MTD driver, attempt 5 times */ - for (int i = 0; i < 5; i++) { - eeprom_mtd = at24c_initialize(i2c); - if (eeprom_mtd) { - /* abort on first valid result */ - if (i > 0) { - warnx("warning: EEPROM needed %d attempts to attach", i+1); - } - break; - } - } - - /* if last attempt is still unsuccessful, abort */ - if (eeprom_mtd == NULL) - errx(1, "failed to initialize EEPROM driver"); - - attached = true; -} - -static void -eeprom_start(void) -{ - int ret; - - if (started) - errx(1, "EEPROM already mounted"); - - if (!attached) - eeprom_attach(); - - /* start NXFFS */ - ret = nxffs_initialize(eeprom_mtd); - - if (ret < 0) - errx(1, "failed to initialize NXFFS - erase EEPROM to reformat"); - - /* mount the EEPROM */ - ret = mount(NULL, "/eeprom", "nxffs", 0, NULL); - - if (ret < 0) - errx(1, "failed to mount /eeprom - erase EEPROM to reformat"); - - started = true; - warnx("mounted EEPROM at /eeprom"); - exit(0); -} - -extern int at24c_nuke(void); - -static void -eeprom_erase(void) -{ - if (!attached) - eeprom_attach(); - - if (at24c_nuke()) - errx(1, "erase failed"); - - errx(0, "erase done, reboot now"); -} - -static void -eeprom_ioctl(unsigned operation) -{ - int fd; - - fd = open("/eeprom/.", 0); - - if (fd < 0) - err(1, "open /eeprom"); - - if (ioctl(fd, operation, 0) < 0) - err(1, "ioctl"); - - exit(0); -} - -static void -eeprom_save(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom save_param' deprecated - use 'param save' instead"); - - /* delete the file in case it exists */ - unlink(name); - - /* create the file */ - int fd = open(name, O_WRONLY | O_CREAT | O_EXCL); - - if (fd < 0) - err(1, "opening '%s' failed", name); - - int result = param_export(fd, false); - close(fd); - - if (result < 0) { - unlink(name); - errx(1, "error exporting to '%s'", name); - } - - exit(0); -} - -static void -eeprom_load(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom load_param' deprecated - use 'param load' instead"); - - int fd = open(name, O_RDONLY); - - if (fd < 0) - err(1, "open '%s'", name); - - int result = param_load(fd); - close(fd); - - if (result < 0) - errx(1, "error importing from '%s'", name); - - exit(0); -} - -extern void at24c_test(void); - -static void -eeprom_test(void) -{ - at24c_test(); - exit(0); -} |