Resync new repository with old repo r5166

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3

1 files changed, 60 insertions, 0 deletions

diff --git a/nuttx/configs/z8f64200100kit/README.txt b/nuttx/configs/z8f64200100kit/README.txt
new file mode 100644
index 000000000..afe647565
--- /dev/null
+++ b/nuttx/configs/z8f64200100kit/README.txt
@@ -0,0 +1,60 @@
+README.txt
+^^^^^^^^^^
+
+ZDS-II Compiler Versions
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+4.10.1
+  The ZDS-II version 4.10.2 will not compile NuttX.  It reports "internal
+  errors" on one of the files, mm/mm_initialize.c.  Below is a simple work-
+  around.  With this work-around in place, NuttX builds successfully with
+  the 4.10.1 compiler.
+
+    --- mm/mm_initialize.c.SAVE	2008-02-13 08:06:46.833857700 -0600
+    +++ mm/mm_initialize.c	2008-02-13 08:07:26.367608900 -0600
+    @@ -94,8 +94,11 @@
+    {
+       int i;
+ 
+    +#if 0 /* DO NOT CHECK IN */
+       CHECK_ALLOCNODE_SIZE;
+       CHECK_FREENODE_SIZE;
+    +#endif
+ 
+   /* Set up global variables */
+
+4.9.5
+  This is the latest tool version listed on the ZiLOG site for the Z8F6403.
+  However, it uses different compiler command line arguments.
+
+Other Versions
+  If you use any version of ZDS-II other than 4.10.1 or if you install ZDS-II
+  at any location other than the default location, you will have to modify
+  two files:  (1) configs/z8f64200100kit/*/setenv.sh and (2)
+  configs/z8f64200100kit/*/Make.defs.
+
+Configuration Subdirectories
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+- src/ and include/
+    These directories contain common logic for all z8f64200100kit
+    configurations.
+
+Variations on the basic z8f64200100kit configuration are maintained
+in subdirectories.  To configure any specific configuration, do the
+following steps:
+
+   cd <nuttx-top-directory>/tools
+   ./configure.sh z8f64200100kit/<sub-directory>
+   cd <nuttx-top-directgory>
+   make
+
+Where <sub-directory> is the specific board configuration that you
+wish to build.  The following board-specific configurations are
+available:
+
+- ostest
+    This builds the examples/ostest application for execution from FLASH.
+    See examples/README.txt for information about ostest.
+
+Check out any README.txt files in these <sub-directory>s.