diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2014-03-03 10:32:01 +0100 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2014-03-03 10:32:01 +0100 |
commit | 5cefd4811f7913402baabf93939ed4fbf4727654 (patch) | |
tree | 5e97cf7a45c4c5b7fd6e01e05e2ec87bd2aaf2aa /src/drivers/boards/px4io-v2/board_config.h | |
parent | 7bb583d6e21a0fa7e51f147d23997aaeb7e218c9 (diff) | |
parent | 3dd3ba4637bfe6d665f20c1e5712ac22131b5b22 (diff) | |
download | px4-firmware-mavlink_variable_length.tar.gz px4-firmware-mavlink_variable_length.tar.bz2 px4-firmware-mavlink_variable_length.zip |
Merged with master, cleanup of varlength prototypemavlink_variable_length
Diffstat (limited to 'src/drivers/boards/px4io-v2/board_config.h')
-rw-r--r-- | src/drivers/boards/px4io-v2/board_config.h | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/src/drivers/boards/px4io-v2/board_config.h b/src/drivers/boards/px4io-v2/board_config.h new file mode 100644 index 000000000..ef9bb5cad --- /dev/null +++ b/src/drivers/boards/px4io-v2/board_config.h @@ -0,0 +1,138 @@ +/**************************************************************************** + * + * Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_config.h + * + * PX4IOV2 internal definitions + */ + +#pragma once + +/****************************************************************************** + * Included Files + ******************************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/compiler.h> +#include <stdint.h> + +/* these headers are not C++ safe */ +#include <stm32.h> +#include <arch/board/board.h> + +/****************************************************************************** + * Definitions + ******************************************************************************/ +/* Configuration **************************************************************/ + +/****************************************************************************** + * Serial + ******************************************************************************/ +#define PX4FMU_SERIAL_BASE STM32_USART2_BASE +#define PX4FMU_SERIAL_VECTOR STM32_IRQ_USART2 +#define PX4FMU_SERIAL_TX_GPIO GPIO_USART2_TX +#define PX4FMU_SERIAL_RX_GPIO GPIO_USART2_RX +#define PX4FMU_SERIAL_TX_DMA DMACHAN_USART2_TX +#define PX4FMU_SERIAL_RX_DMA DMACHAN_USART2_RX +#define PX4FMU_SERIAL_CLOCK STM32_PCLK1_FREQUENCY +#define PX4FMU_SERIAL_BITRATE 1500000 + +/****************************************************************************** + * GPIOS + ******************************************************************************/ + +/* LEDS **********************************************************************/ + +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14) +#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15) +#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13) + +/* Safety switch button *******************************************************/ + +#define GPIO_BTN_SAFETY (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN5) + +/* Power switch controls ******************************************************/ + +#define GPIO_SPEKTRUM_PWR_EN (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13) + +#define GPIO_SERVO_FAULT_DETECT (GPIO_INPUT|GPIO_CNF_INPULLUP|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN15) + +/* Analog inputs **************************************************************/ + +#define GPIO_ADC_VSERVO (GPIO_INPUT|GPIO_CNF_ANALOGIN|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN4) + +/* the same rssi signal goes to both an adc and a timer input */ +#define GPIO_ADC_RSSI (GPIO_INPUT|GPIO_CNF_ANALOGIN|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN5) +#define GPIO_TIM_RSSI (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN12) + +/* PWM pins **************************************************************/ + +#define GPIO_PPM (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN8) + +#define GPIO_PWM1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0) +#define GPIO_PWM2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1) +#define GPIO_PWM3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8) +#define GPIO_PWM4 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9) +#define GPIO_PWM5 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN6) +#define GPIO_PWM6 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN7) +#define GPIO_PWM7 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0) +#define GPIO_PWM8 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1) + +/* SBUS pins *************************************************************/ + +/* XXX these should be UART pins */ +#define GPIO_SBUS_INPUT (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN11) +#define GPIO_SBUS_OUTPUT (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10) +#define GPIO_SBUS_OENABLE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN4) + +/* + * High-resolution timer + */ +#define HRT_TIMER 1 /* use timer1 for the HRT */ +#define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ +#define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ +#define GPIO_PPM_IN (GPIO_ALT|GPIO_CNF_INPULLUP|GPIO_PORTE|GPIO_PIN9) + +/* LED definitions ******************************************************************/ +/* PX4 has two LEDs that we will encode as: */ + +#define LED_STARTED 0 /* LED? */ +#define LED_HEAPALLOCATE 1 /* LED? */ +#define LED_IRQSENABLED 2 /* LED? + LED? */ +#define LED_STACKCREATED 3 /* LED? */ +#define LED_INIRQ 4 /* LED? + LED? */ +#define LED_SIGNAL 5 /* LED? + LED? */ +#define LED_ASSERTION 6 /* LED? + LED? + LED? */ +#define LED_PANIC 7 /* N/C + N/C + N/C + LED? */ + |