diff options
author | mazahner <mazahner@student.ethz.ch> | 2014-11-10 17:39:04 +0100 |
---|---|---|
committer | mazahner <mazahner@student.ethz.ch> | 2014-11-10 17:39:04 +0100 |
commit | 6ec08335459457c82158d2df06050bd30fb8cc59 (patch) | |
tree | 3d5407b6bc88533eacedb3bebfc9e0c9b23609ea /src/modules/px4iofirmware | |
parent | d15203de91cc07530809060f949374bb8918daea (diff) | |
parent | 4e8e6e653beb21808f532b83c6c6e827103ea379 (diff) | |
download | px4-firmware-6ec08335459457c82158d2df06050bd30fb8cc59.tar.gz px4-firmware-6ec08335459457c82158d2df06050bd30fb8cc59.tar.bz2 px4-firmware-6ec08335459457c82158d2df06050bd30fb8cc59.zip |
Merge branch 'master' of https://github.com/mazahner/Firmware
Diffstat (limited to 'src/modules/px4iofirmware')
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 79 | ||||
-rw-r--r-- | src/modules/px4iofirmware/dsm.c | 10 | ||||
-rw-r--r-- | src/modules/px4iofirmware/mixer.cpp | 69 | ||||
-rw-r--r-- | src/modules/px4iofirmware/module.mk | 3 | ||||
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 7 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.c | 6 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.h | 3 | ||||
-rw-r--r-- | src/modules/px4iofirmware/registers.c | 31 | ||||
-rw-r--r-- | src/modules/px4iofirmware/sbus.c | 95 |
9 files changed, 223 insertions, 80 deletions
diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 185cb20dd..ad60ee03e 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -43,6 +43,7 @@ #include <drivers/drv_hrt.h> #include <systemlib/perf_counter.h> #include <systemlib/ppm_decode.h> +#include <rc/st24.h> #include "px4io.h" @@ -51,11 +52,62 @@ #define RC_CHANNEL_LOW_THRESH -8000 /* 10% threshold */ static bool ppm_input(uint16_t *values, uint16_t *num_values, uint16_t *frame_len); +static bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated); static perf_counter_t c_gather_dsm; static perf_counter_t c_gather_sbus; static perf_counter_t c_gather_ppm; +static int _dsm_fd; + +static uint16_t rc_value_override = 0; + +bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) +{ + perf_begin(c_gather_dsm); + uint16_t temp_count = r_raw_rc_count; + uint8_t n_bytes = 0; + uint8_t *bytes; + *dsm_updated = dsm_input(r_raw_rc_values, &temp_count, &n_bytes, &bytes); + if (*dsm_updated) { + r_raw_rc_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; + r_raw_rc_count = temp_count & 0x7fff; + if (temp_count & 0x8000) + r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_DSM11; + else + r_raw_rc_flags &= ~PX4IO_P_RAW_RC_FLAGS_RC_DSM11; + + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + + } + perf_end(c_gather_dsm); + + /* get data from FD and attempt to parse with DSM and ST24 libs */ + uint8_t st24_rssi, rx_count; + uint16_t st24_channel_count = 0; + + *st24_updated = false; + + for (unsigned i = 0; i < n_bytes; i++) { + /* set updated flag if one complete packet was parsed */ + *st24_updated |= (OK == st24_decode(bytes[i], &st24_rssi, &rx_count, + &st24_channel_count, r_raw_rc_values, PX4IO_RC_INPUT_CHANNELS)); + } + + if (*st24_updated) { + + *rssi = st24_rssi; + r_raw_rc_count = st24_channel_count; + + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_ST24; + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); + r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); + } + + return (*dsm_updated | *st24_updated); +} + void controls_init(void) { @@ -65,7 +117,7 @@ controls_init(void) system_state.rc_channels_timestamp_valid = 0; /* DSM input (USART1) */ - dsm_init("/dev/ttyS0"); + _dsm_fd = dsm_init("/dev/ttyS0"); /* S.bus input (USART3) */ sbus_init("/dev/ttyS2"); @@ -116,20 +168,8 @@ controls_tick() { #endif perf_begin(c_gather_dsm); - uint16_t temp_count = r_raw_rc_count; - bool dsm_updated = dsm_input(r_raw_rc_values, &temp_count); - if (dsm_updated) { - r_raw_rc_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; - r_raw_rc_count = temp_count & 0x7fff; - if (temp_count & 0x8000) - r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_DSM11; - else - r_raw_rc_flags &= ~PX4IO_P_RAW_RC_FLAGS_RC_DSM11; - - r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FRAME_DROP); - r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE); - - } + bool dsm_updated, st24_updated; + (void)dsm_port_input(&rssi, &dsm_updated, &st24_updated); perf_end(c_gather_dsm); perf_begin(c_gather_sbus); @@ -191,7 +231,7 @@ controls_tick() { /* * If we received a new frame from any of the RC sources, process it. */ - if (dsm_updated || sbus_updated || ppm_updated) { + if (dsm_updated || sbus_updated || ppm_updated || st24_updated) { /* record a bitmask of channels assigned */ unsigned assigned_channels = 0; @@ -278,6 +318,9 @@ controls_tick() { r_rc_values[mapped] = SIGNED_TO_REG(scaled); assigned_channels |= (1 << mapped); + } else if (mapped == PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH) { + /* pick out override channel, indicated by special mapping */ + rc_value_override = SIGNED_TO_REG(scaled); } } } @@ -371,7 +414,7 @@ controls_tick() { * requested override. * */ - if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (REG_TO_SIGNED(r_rc_values[4]) < RC_CHANNEL_LOW_THRESH)) + if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (REG_TO_SIGNED(rc_value_override) < RC_CHANNEL_LOW_THRESH)) override = true; if (override) { @@ -379,7 +422,7 @@ controls_tick() { r_status_flags |= PX4IO_P_STATUS_FLAGS_OVERRIDE; /* mix new RC input control values to servos */ - if (dsm_updated || sbus_updated || ppm_updated) + if (dsm_updated || sbus_updated || ppm_updated || st24_updated) mixer_tick(); } else { diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index d3f365822..6e57c9ec7 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -452,10 +452,12 @@ dsm_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values) * * @param[out] values pointer to per channel array of decoded values * @param[out] num_values pointer to number of raw channel values returned, high order bit 0:10 bit data, 1:11 bit data + * @param[out] n_butes number of bytes read + * @param[out] bytes pointer to the buffer of read bytes * @return true=decoded raw channel values updated, false=no update */ bool -dsm_input(uint16_t *values, uint16_t *num_values) +dsm_input(uint16_t *values, uint16_t *num_values, uint8_t *n_bytes, uint8_t **bytes) { ssize_t ret; hrt_abstime now; @@ -478,8 +480,12 @@ dsm_input(uint16_t *values, uint16_t *num_values) ret = read(dsm_fd, &dsm_frame[dsm_partial_frame_count], DSM_FRAME_SIZE - dsm_partial_frame_count); /* if the read failed for any reason, just give up here */ - if (ret < 1) + if (ret < 1) { return false; + } else { + *n_bytes = ret; + *bytes = &dsm_frame[dsm_partial_frame_count]; + } dsm_last_rx_time = now; diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 606c639f9..c0b8ac358 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -58,14 +58,7 @@ extern "C" { /* * Maximum interval in us before FMU signal is considered lost */ -#define FMU_INPUT_DROP_LIMIT_US 200000 - -/* XXX need to move the RC_CHANNEL_FUNCTION out of rc_channels.h and into systemlib */ -#define ROLL 0 -#define PITCH 1 -#define YAW 2 -#define THROTTLE 3 -#define OVERRIDE 4 +#define FMU_INPUT_DROP_LIMIT_US 500000 /* current servo arm/disarm state */ static bool mixer_servos_armed = false; @@ -98,7 +91,8 @@ mixer_tick(void) { /* check that we are receiving fresh data from the FMU */ - if (hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) { + if ((system_state.fmu_data_received_time == 0) || + hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) { /* too long without FMU input, time to go to failsafe */ if (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) { @@ -109,6 +103,9 @@ mixer_tick(void) } else { r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_OK; + + /* this flag is never cleared once OK */ + r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED; } /* default to failsafe mixing - it will be forced below if flag is set */ @@ -139,7 +136,9 @@ mixer_tick(void) (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) && !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) && - !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) { + !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) && + /* do not enter manual override if we asked for termination failsafe and FMU is lost */ + !(r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE)) { /* if allowed, mix from RC inputs directly */ source = MIX_OVERRIDE; @@ -155,29 +154,11 @@ mixer_tick(void) } /* - * Check if we should force failsafe - and do it if we have to - */ - if (r_setup_arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) { - source = MIX_FAILSAFE; - } - - /* - * Set failsafe status flag depending on mixing source - */ - if (source == MIX_FAILSAFE) { - r_status_flags |= PX4IO_P_STATUS_FLAGS_FAILSAFE; - } else { - r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_FAILSAFE); - } - - /* * Decide whether the servos should be armed right now. * * We must be armed, and we must have a PWM source; either raw from * FMU or from the mixer. * - * XXX correct behaviour for failsafe may require an additional case - * here. */ should_arm = ( /* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) @@ -195,6 +176,38 @@ mixer_tick(void) && (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK); /* + * Check if failsafe termination is set - if yes, + * set the force failsafe flag once entering the first + * failsafe condition. + */ + if ( /* if we have requested flight termination style failsafe (noreturn) */ + (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) && + /* and we ended up in a failsafe condition */ + (source == MIX_FAILSAFE) && + /* and we should be armed, so we intended to provide outputs */ + should_arm && + /* and FMU is initialized */ + (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED)) { + r_setup_arming |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; + } + + /* + * Check if we should force failsafe - and do it if we have to + */ + if (r_setup_arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) { + source = MIX_FAILSAFE; + } + + /* + * Set failsafe status flag depending on mixing source + */ + if (source == MIX_FAILSAFE) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_FAILSAFE; + } else { + r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_FAILSAFE); + } + + /* * Run the mixers. */ if (source == MIX_FAILSAFE) { diff --git a/src/modules/px4iofirmware/module.mk b/src/modules/px4iofirmware/module.mk index 01869569f..eb99e8a96 100644 --- a/src/modules/px4iofirmware/module.mk +++ b/src/modules/px4iofirmware/module.mk @@ -14,7 +14,8 @@ SRCS = adc.c \ ../systemlib/mixer/mixer_group.cpp \ ../systemlib/mixer/mixer_multirotor.cpp \ ../systemlib/mixer/mixer_simple.cpp \ - ../systemlib/pwm_limit/pwm_limit.c + ../systemlib/pwm_limit/pwm_limit.c \ + ../../lib/rc/st24.c ifeq ($(BOARD),px4io-v1) SRCS += i2c.c diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 050783687..9b2e047cb 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -111,6 +111,8 @@ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ #define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ #define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */ +#define PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED (1 << 13) /* FMU was initialized and OK once */ +#define PX4IO_P_STATUS_FLAGS_RC_ST24 (1 << 14) /* ST24 input is valid */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */ @@ -180,6 +182,7 @@ #define PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED (1 << 6) /* Disable the IO-internal evaluation of the RC */ #define PX4IO_P_SETUP_ARMING_LOCKDOWN (1 << 7) /* If set, the system operates normally, but won't actuate any servos */ #define PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE (1 << 8) /* If set, the system will always output the failsafe values */ +#define PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE (1 << 9) /* If set, the system will never return from a failsafe, but remain in failsafe once triggered. */ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ @@ -218,6 +221,7 @@ enum { /* DSM bind states */ hence index 12 can safely be used. */ #define PX4IO_P_SETUP_RC_THR_FAILSAFE_US 13 /**< the throttle failsafe pulse length in microseconds */ +#define PX4IO_P_SETUP_FORCE_SAFETY_ON 14 /* force safety switch into 'disarmed' (PWM disabled state) */ #define PX4IO_FORCE_SAFETY_MAGIC 22027 /* required argument for force safety (random) */ /* autopilot control values, -10000..10000 */ @@ -243,6 +247,7 @@ enum { /* DSM bind states */ #define PX4IO_P_RC_CONFIG_MAX 2 /**< highest input value */ #define PX4IO_P_RC_CONFIG_DEADZONE 3 /**< band around center that is ignored */ #define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /**< mapped input value */ +#define PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH 100 /**< magic value for mode switch */ #define PX4IO_P_RC_CONFIG_OPTIONS 5 /**< channel options bitmask */ #define PX4IO_P_RC_CONFIG_OPTIONS_ENABLED (1 << 0) #define PX4IO_P_RC_CONFIG_OPTIONS_REVERSE (1 << 1) diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index cd134ccb4..30f32b38e 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -124,6 +124,9 @@ heartbeat_blink(void) { static bool heartbeat = false; LED_BLUE(heartbeat = !heartbeat); +#ifdef GPIO_LED4 + LED_RING(heartbeat); +#endif } static uint64_t reboot_time; @@ -191,6 +194,9 @@ user_start(int argc, char *argv[]) LED_AMBER(false); LED_BLUE(false); LED_SAFETY(false); +#ifdef GPIO_LED4 + LED_RING(false); +#endif /* turn on servo power (if supported) */ #ifdef POWER_SERVO diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index b00a96717..8186e4c78 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -140,6 +140,7 @@ extern pwm_limit_t pwm_limit; #define LED_BLUE(_s) stm32_gpiowrite(GPIO_LED1, !(_s)) #define LED_AMBER(_s) stm32_gpiowrite(GPIO_LED2, !(_s)) #define LED_SAFETY(_s) stm32_gpiowrite(GPIO_LED3, !(_s)) +#define LED_RING(_s) stm32_gpiowrite(GPIO_LED4, !(_s)) #ifdef CONFIG_ARCH_BOARD_PX4IO_V1 @@ -215,7 +216,7 @@ extern uint16_t adc_measure(unsigned channel); extern void controls_init(void); extern void controls_tick(void); extern int dsm_init(const char *device); -extern bool dsm_input(uint16_t *values, uint16_t *num_values); +extern bool dsm_input(uint16_t *values, uint16_t *num_values, uint8_t *n_bytes, uint8_t **bytes); extern void dsm_bind(uint16_t cmd, int pulses); extern int sbus_init(const char *device); extern bool sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels); diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 43161aa70..49c2a9f56 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -190,7 +190,8 @@ volatile uint16_t r_page_setup[] = PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE | \ PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED | \ PX4IO_P_SETUP_ARMING_LOCKDOWN | \ - PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) + PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE | \ + PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) #define PX4IO_P_SETUP_RATES_VALID ((1 << PX4IO_SERVO_COUNT) - 1) #define PX4IO_P_SETUP_RELAYS_VALID ((1 << PX4IO_RELAY_CHANNELS) - 1) @@ -285,7 +286,9 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num while ((offset < PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { /* XXX range-check value? */ - r_page_servos[offset] = *values; + if (*values != PWM_IGNORE_THIS_CHANNEL) { + r_page_servos[offset] = *values; + } offset++; num_values--; @@ -516,6 +519,19 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) r_status_flags |= PX4IO_P_STATUS_FLAGS_INIT_OK; } + /* + * If the failsafe termination flag is set, do not allow the autopilot to unset it + */ + value |= (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE); + + /* + * If failsafe termination is enabled and force failsafe bit is set, do not allow + * the autopilot to clear it. + */ + if (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) { + value |= (r_setup_arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE); + } + r_setup_arming = value; break; @@ -587,6 +603,12 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) dsm_bind(value & 0x0f, (value >> 4) & 0xF); break; + case PX4IO_P_SETUP_FORCE_SAFETY_ON: + if (value == PX4IO_FORCE_SAFETY_MAGIC) { + r_status_flags &= ~PX4IO_P_STATUS_FLAGS_SAFETY_OFF; + } + break; + case PX4IO_P_SETUP_FORCE_SAFETY_OFF: if (value == PX4IO_FORCE_SAFETY_MAGIC) { r_status_flags |= PX4IO_P_STATUS_FLAGS_SAFETY_OFF; @@ -670,7 +692,8 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] == UINT8_MAX) { disabled = true; - } else if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) { + } else if ((conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) && + (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] != PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH)) { count++; } diff --git a/src/modules/px4iofirmware/sbus.c b/src/modules/px4iofirmware/sbus.c index 0f0414148..d76ec55f0 100644 --- a/src/modules/px4iofirmware/sbus.c +++ b/src/modules/px4iofirmware/sbus.c @@ -57,11 +57,12 @@ #define SBUS_FLAGS_BYTE 23 #define SBUS_FAILSAFE_BIT 3 #define SBUS_FRAMELOST_BIT 2 +#define SBUS1_FRAME_DELAY 14000 /* Measured values with Futaba FX-30/R6108SB: -+100% on TX: PCM 1.100/1.520/1.950ms -> SBus raw values: 350/1024/1700 (100% ATV) - -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) + -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) -+152% on TX: PCM 0.884/1.520/2.160ms -> SBus raw values: 1/1024/2047 (140% ATV plus dirty tricks) */ @@ -80,6 +81,7 @@ static int sbus_fd = -1; static hrt_abstime last_rx_time; static hrt_abstime last_frame_time; +static hrt_abstime last_txframe_time = 0; static uint8_t frame[SBUS_FRAME_SIZE]; @@ -87,13 +89,15 @@ static unsigned partial_frame_count; unsigned sbus_frame_drops; -static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels); +static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, + bool *sbus_frame_drop, uint16_t max_channels); int sbus_init(const char *device) { - if (sbus_fd < 0) + if (sbus_fd < 0) { sbus_fd = open(device, O_RDWR | O_NONBLOCK); + } if (sbus_fd >= 0) { struct termios t; @@ -113,16 +117,49 @@ sbus_init(const char *device) } else { debug("S.Bus: open failed"); } + return sbus_fd; } void sbus1_output(uint16_t *values, uint16_t num_values) { - char a = 'A'; - write(sbus_fd, &a, 1); -} + uint8_t byteindex = 1; /*Data starts one byte into the sbus frame. */ + uint8_t offset = 0; + uint16_t value; + hrt_abstime now; + + now = hrt_absolute_time(); + + if ((now - last_txframe_time) > SBUS1_FRAME_DELAY) { + last_txframe_time = now; + uint8_t oframe[SBUS_FRAME_SIZE] = { 0x0f }; + + /* 16 is sbus number of servos/channels minus 2 single bit channels. + * currently ignoring single bit channels. */ + for (unsigned i = 0; (i < num_values) && (i < 16); ++i) { + value = (uint16_t)(((values[i] - SBUS_SCALE_OFFSET) / SBUS_SCALE_FACTOR) + .5f); + + /*protect from out of bounds values and limit to 11 bits*/ + if (value > 0x07ff ) { + value = 0x07ff; + } + + while (offset >= 8) { + ++byteindex; + offset -= 8; + } + + oframe[byteindex] |= (value << (offset)) & 0xff; + oframe[byteindex + 1] |= (value >> (8 - offset)) & 0xff; + oframe[byteindex + 2] |= (value >> (16 - offset)) & 0xff; + offset += 11; + } + + write(sbus_fd, oframe, SBUS_FRAME_SIZE); + } +} void sbus2_output(uint16_t *values, uint16_t num_values) { @@ -167,8 +204,9 @@ sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sb ret = read(sbus_fd, &frame[partial_frame_count], SBUS_FRAME_SIZE - partial_frame_count); /* if the read failed for any reason, just give up here */ - if (ret < 1) + if (ret < 1) { return false; + } last_rx_time = now; @@ -180,8 +218,9 @@ sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sb /* * If we don't have a full frame, return */ - if (partial_frame_count < SBUS_FRAME_SIZE) + if (partial_frame_count < SBUS_FRAME_SIZE) { return false; + } /* * Great, it looks like we might have a frame. Go ahead and @@ -228,7 +267,8 @@ static const struct sbus_bit_pick sbus_decoder[SBUS_INPUT_CHANNELS][3] = { }; static bool -sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_values) +sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, + uint16_t max_values) { /* check frame boundary markers to avoid out-of-sync cases */ if ((frame[0] != 0x0f)) { @@ -237,23 +277,27 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool } switch (frame[24]) { - case 0x00: + case 0x00: /* this is S.BUS 1 */ break; - case 0x03: + + case 0x03: /* S.BUS 2 SLOT0: RX battery and external voltage */ break; - case 0x83: + + case 0x83: /* S.BUS 2 SLOT1 */ break; - case 0x43: - case 0xC3: - case 0x23: - case 0xA3: - case 0x63: - case 0xE3: + + case 0x43: + case 0xC3: + case 0x23: + case 0xA3: + case 0x63: + case 0xE3: break; - default: + + default: /* we expect one of the bits above, but there are some we don't know yet */ break; } @@ -283,7 +327,7 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool /* convert 0-2048 values to 1000-2000 ppm encoding in a not too sloppy fashion */ - values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR +.5f) + SBUS_SCALE_OFFSET; + values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR + .5f) + SBUS_SCALE_OFFSET; } /* decode switch channels if data fields are wide enough */ @@ -304,16 +348,17 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool /* report that we failed to read anything valid off the receiver */ *sbus_failsafe = true; *sbus_frame_drop = true; - } - else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ + + } else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ /* set a special warning flag - * - * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this - * condition as fail-safe greatly reduces the reliability and range of the radio link, + * + * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this + * condition as fail-safe greatly reduces the reliability and range of the radio link, * e.g. by prematurely issueing return-to-launch!!! */ *sbus_failsafe = false; *sbus_frame_drop = true; + } else { *sbus_failsafe = false; *sbus_frame_drop = false; |