diff options
-rw-r--r-- | src/drivers/meas_airspeed/meas_airspeed.cpp | 8 | ||||
-rw-r--r-- | src/modules/commander/airspeed_calibration.cpp | 18 |
2 files changed, 11 insertions, 15 deletions
diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index bcdf4670a..c136c6641 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -232,8 +232,6 @@ MEASAirspeed::collect() * tubes are connected backwards */ float diff_press_pa = diff_press_pa_raw; - warnx("diff preasure: %.4f", (double)diff_press_pa); - /* note that we return both the absolute value with offset applied and a raw value without the offset applied. This @@ -261,9 +259,9 @@ MEASAirspeed::collect() report.differential_pressure_filtered_pa = _filter.apply(diff_press_pa); /* the dynamics of the filter can make it overshoot into the negative range */ - //if (report.differential_pressure_filtered_pa < 0.0f) { - // report.differential_pressure_filtered_pa = _filter.reset(diff_press_pa); - //} + if (report.differential_pressure_filtered_pa < 0.0f) { + report.differential_pressure_filtered_pa = _filter.reset(diff_press_pa); + } report.differential_pressure_raw_pa = diff_press_pa_raw; report.max_differential_pressure_pa = _max_differential_pressure_pa; diff --git a/src/modules/commander/airspeed_calibration.cpp b/src/modules/commander/airspeed_calibration.cpp index 339b11bbe..0e58c68b6 100644 --- a/src/modules/commander/airspeed_calibration.cpp +++ b/src/modules/commander/airspeed_calibration.cpp @@ -180,13 +180,11 @@ int do_airspeed_calibration(int mavlink_fd) return ERROR; } - mavlink_log_critical(mavlink_fd, "Offset of %d Pascal", (int)diff_pres_offset); + mavlink_log_critical(mavlink_fd, "Offset of %d Pa, create airflow now!", (int)diff_pres_offset); /* wait 500 ms to ensure parameter propagated through the system */ usleep(500 * 1000); - mavlink_log_critical(mavlink_fd, "Create airflow now"); - calibration_counter = 0; const unsigned maxcount = 3000; @@ -206,18 +204,18 @@ int do_airspeed_calibration(int mavlink_fd) calibration_counter++; if (fabsf(diff_pres.differential_pressure_raw_pa) < 50.0f) { - if (calibration_counter % 500 == 0) { - mavlink_log_info(mavlink_fd, "Create airflow! (%d, wanted: 50 Pa)", - (int)diff_pres.differential_pressure_raw_pa); + if (calibration_counter % 100 == 0) { + mavlink_log_critical(mavlink_fd, "Missing airflow! (%d, wanted: 50 Pa, #h101)", + (int)diff_pres.differential_pressure_raw_pa); } continue; } /* do not allow negative values */ if (diff_pres.differential_pressure_raw_pa < 0.0f) { - mavlink_log_critical(mavlink_fd, "Swap static and dynamic ports!"); - mavlink_log_info(mavlink_fd, "ERROR: Negative pressure difference detected! (%d Pa)", - (int)diff_pres.differential_pressure_raw_pa); + mavlink_log_info(mavlink_fd, "negative pressure: ERROR (%d Pa)", + (int)diff_pres.differential_pressure_raw_pa); + mavlink_log_critical(mavlink_fd, "%d Pa: swap static and dynamic ports!", (int)diff_pres.differential_pressure_raw_pa); close(diff_pres_sub); /* the user setup is wrong, wipe the calibration to force a proper re-calibration */ @@ -238,7 +236,7 @@ int do_airspeed_calibration(int mavlink_fd) mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name); return ERROR; } else { - mavlink_log_info(mavlink_fd, "Positive pressure: OK (%d Pa)", + mavlink_log_info(mavlink_fd, "positive pressure: OK (%d Pa)", (int)diff_pres.differential_pressure_raw_pa); break; } |