diff options
Diffstat (limited to 'ROMFS/px4fmu_common/init.d/1001_rc_quad.hil')
-rw-r--r-- | ROMFS/px4fmu_common/init.d/1001_rc_quad.hil | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil deleted file mode 100644 index 9b664d63e..000000000 --- a/ROMFS/px4fmu_common/init.d/1001_rc_quad.hil +++ /dev/null @@ -1,105 +0,0 @@ -#!nsh -# -# USB HIL start -# - -echo "[HIL] HILS quadrotor starting.." - -# -# Load default params for this platform -# -if param compare SYS_AUTOCONFIG 1 -then - # Set all params here, then disable autoconfig - param set SYS_AUTOCONFIG 0 - - param set MC_ATTRATE_D 0.0 - param set MC_ATTRATE_I 0.0 - param set MC_ATTRATE_P 0.05 - param set MC_ATT_D 0.0 - param set MC_ATT_I 0.0 - param set MC_ATT_P 3.0 - param set MC_YAWPOS_D 0.0 - param set MC_YAWPOS_I 0.0 - param set MC_YAWPOS_P 2.1 - param set MC_YAWRATE_D 0.0 - param set MC_YAWRATE_I 0.0 - param set MC_YAWRATE_P 0.05 - param set NAV_TAKEOFF_ALT 3.0 - param set MPC_TILT_MAX 0.5 - param set MPC_THR_MAX 0.5 - param set MPC_THR_MIN 0.1 - param set MPC_XY_D 0 - param set MPC_XY_P 0.5 - param set MPC_XY_VEL_D 0 - param set MPC_XY_VEL_I 0 - param set MPC_XY_VEL_MAX 3 - param set MPC_XY_VEL_P 0.2 - param set MPC_Z_D 0 - param set MPC_Z_P 1 - param set MPC_Z_VEL_D 0 - param set MPC_Z_VEL_I 0.1 - param set MPC_Z_VEL_MAX 2 - param set MPC_Z_VEL_P 0.20 - - param save -fi - -# Allow USB some time to come up -sleep 1 -# Tell MAVLink that this link is "fast" -mavlink start -b 230400 -d /dev/ttyACM0 - -# Create a fake HIL /dev/pwm_output interface -hil mode_pwm - -# -# Force some key parameters to sane values -# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor -# see https://pixhawk.ethz.ch/mavlink/ -# -param set MAV_TYPE 2 - -# -# Check if we got an IO -# -if px4io start -then - echo "IO started" -else - fmu mode_serial - echo "FMU started" -fi - -# -# Start the sensors (depends on orb, px4io) -# -sh /etc/init.d/rc.sensors - -# -# Start the attitude estimator (depends on orb) -# -att_pos_estimator_ekf start - -# -# Load mixer and start controllers (depends on px4io) -# -mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix - -# -# Start position estimator -# -position_estimator_inav start - -# -# Start attitude control -# -multirotor_att_control start - -# -# Start position control -# -multirotor_pos_control start - -echo "[HIL] setup done, running" - |