diff options
Diffstat (limited to 'ROMFS/px4fmu_common')
-rw-r--r-- | ROMFS/px4fmu_common/init.d/11001_hexa_cox | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/12001_octo_cox | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/2100_mpx_easystar | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/3031_phantom | 8 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/3032_skywalker_x5 | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.io | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.logging | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.mc_defaults | 4 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rc.sensors | 2 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/init.d/rcS | 72 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix (renamed from ROMFS/px4fmu_common/mixers/hexa_cox.mix) | 0 | ||||
-rw-r--r-- | ROMFS/px4fmu_common/mixers/easystar.mix | 31 |
12 files changed, 82 insertions, 47 deletions
diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox index 38e65435b..df2e609bc 100644 --- a/ROMFS/px4fmu_common/init.d/11001_hexa_cox +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -9,7 +9,7 @@ sh /etc/init.d/rc.mc_defaults -set MIXER hexa_cox +set MIXER FMU_hexa_cox # We only can run one channel group with one rate, so set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox index 99f902a6d..8703f5f2f 100644 --- a/ROMFS/px4fmu_common/init.d/12001_octo_cox +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -7,6 +7,6 @@ sh /etc/init.d/rc.mc_defaults -set MIXER octo_cox +set MIXER FMU_octo_cox set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar index 465a22c53..db0e40fc2 100644 --- a/ROMFS/px4fmu_common/init.d/2100_mpx_easystar +++ b/ROMFS/px4fmu_common/init.d/2100_mpx_easystar @@ -5,4 +5,4 @@ sh /etc/init.d/rc.fw_defaults -set MIXER FMU_RET +set MIXER easystar.mix diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom index 6cbd23643..24372bddc 100644 --- a/ROMFS/px4fmu_common/init.d/3031_phantom +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -10,8 +10,8 @@ sh /etc/init.d/rc.fw_defaults if [ $DO_AUTOCONFIG == yes ] then param set FW_AIRSPD_MIN 13 - param set FW_AIRSPD_TRIM 18 - param set FW_AIRSPD_MAX 40 + param set FW_AIRSPD_TRIM 15 + param set FW_AIRSPD_MAX 25 param set FW_ATT_TC 0.3 param set FW_L1_DAMPING 0.75 param set FW_L1_PERIOD 15 @@ -23,12 +23,12 @@ then param set FW_P_LIM_MIN -50 param set FW_P_RMAX_NEG 0 param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 0 + param set FW_P_ROLLFF 1 param set FW_RR_FF 0.5 param set FW_RR_I 0.02 param set FW_RR_IMAX 0.2 param set FW_RR_P 0.08 - param set FW_R_LIM 70 + param set FW_R_LIM 50 param set FW_R_RMAX 0 param set FW_T_HRATE_P 0.01 param set FW_T_RLL2THR 15 diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index bf5a87068..465166f25 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -23,7 +23,7 @@ then param set FW_P_LIM_MIN -45 param set FW_P_RMAX_NEG 0 param set FW_P_RMAX_POS 0 - param set FW_P_ROLLFF 0 + param set FW_P_ROLLFF 1 param set FW_RR_FF 0.3 param set FW_RR_I 0 param set FW_RR_IMAX 0.2 diff --git a/ROMFS/px4fmu_common/init.d/rc.io b/ROMFS/px4fmu_common/init.d/rc.io index 6e8fdbc0f..e23aebd87 100644 --- a/ROMFS/px4fmu_common/init.d/rc.io +++ b/ROMFS/px4fmu_common/init.d/rc.io @@ -11,7 +11,7 @@ px4io recovery # Adjust PX4IO update rate limit # set PX4IO_LIMIT 400 -if hw_ver compare PX4FMU_V1 +if ver hwcmp PX4FMU_V1 then set PX4IO_LIMIT 200 fi diff --git a/ROMFS/px4fmu_common/init.d/rc.logging b/ROMFS/px4fmu_common/init.d/rc.logging index c5aef8273..3469d5f5f 100644 --- a/ROMFS/px4fmu_common/init.d/rc.logging +++ b/ROMFS/px4fmu_common/init.d/rc.logging @@ -5,7 +5,7 @@ if [ -d /fs/microsd ] then - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then echo "Start sdlog2 at 50Hz" sdlog2 start -r 50 -a -b 8 -t diff --git a/ROMFS/px4fmu_common/init.d/rc.mc_defaults b/ROMFS/px4fmu_common/init.d/rc.mc_defaults index 4db62607a..a8c6dc811 100644 --- a/ROMFS/px4fmu_common/init.d/rc.mc_defaults +++ b/ROMFS/px4fmu_common/init.d/rc.mc_defaults @@ -32,9 +32,9 @@ then param set MPC_Z_VEL_D 0.0 param set MPC_Z_VEL_MAX 3 param set MPC_Z_FF 0.5 - param set MPC_TILT_MAX 1.0 + param set MPC_TILTMAX_AIR 45.0 + param set MPC_TILTMAX_LND 15.0 param set MPC_LAND_SPEED 1.0 - param set MPC_LAND_TILT 0.3 fi set PWM_RATE 400 diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index 235be2431..1e14930fe 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -22,7 +22,7 @@ then echo "[init] Using L3GD20(H)" fi -if hw_ver compare PX4FMU_V2 +if ver hwcmp PX4FMU_V2 then if lsm303d start then diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 0cb6d281a..756ee8ef8 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -20,7 +20,7 @@ echo "[init] Looking for microSD..." if mount -t vfat /dev/mmcsd0 /fs/microsd then set LOG_FILE /fs/microsd/bootlog.txt - echo "[init] microSD card mounted at /fs/microsd" + echo "[init] microSD mounted: /fs/microsd" # Start playing the startup tune tone_alarm start else @@ -83,9 +83,9 @@ then param select $PARAM_FILE if param load then - echo "[init] Parameters loaded: $PARAM_FILE" + echo "[init] Params loaded: $PARAM_FILE" else - echo "[init] ERROR: Parameters loading failed: $PARAM_FILE" + echo "[init] ERROR: Params loading failed: $PARAM_FILE" fi # @@ -120,6 +120,8 @@ then set EXIT_ON_END no set MAV_TYPE none set LOAD_DEFAULT_APPS yes + set GPS yes + set GPS_FAKE no # # Set DO_AUTOCONFIG flag to use it in AUTOSTART scripts @@ -146,7 +148,7 @@ then # if param compare SYS_AUTOSTART 0 then - echo "[init] Don't try to find autostart script" + echo "[init] No autostart" else sh /etc/init.d/rc.autostart fi @@ -156,10 +158,10 @@ then # if [ -f $CONFIG_FILE ] then - echo "[init] Reading config: $CONFIG_FILE" + echo "[init] Config: $CONFIG_FILE" sh $CONFIG_FILE else - echo "[init] Config file not found: $CONFIG_FILE" + echo "[init] Config not found: $CONFIG_FILE" fi # @@ -246,7 +248,7 @@ then echo "[init] ERROR: PX4IO not found, disabling output" # Avoid using ttyS0 for MAVLink on FMUv1 - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then set FMU_MODE serial fi @@ -260,14 +262,14 @@ then if [ $HIL == yes ] then set OUTPUT_MODE hil - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then set FMU_MODE serial fi - else - # Try to get an USB console if not in HIL mode - nshterm /dev/ttyACM0 & fi + + # Try to get an USB console + nshterm /dev/ttyACM0 & # # Start the Commander (needs to be this early for in-air-restarts) @@ -306,7 +308,7 @@ then tone_alarm $TUNE_OUT_ERROR fi - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] then @@ -381,7 +383,7 @@ then tone_alarm $TUNE_OUT_ERROR fi - if hw_ver compare PX4FMU_V1 + if ver hwcmp PX4FMU_V1 then if [ $FMU_MODE == pwm -o $FMU_MODE == gpio ] then @@ -401,23 +403,17 @@ then # if [ $MAVLINK_FLAGS == default ] then - if [ $HIL == yes ] + # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s + if [ $TTYS1_BUSY == yes ] then - sleep 1 - set MAVLINK_FLAGS "-r 10000 -d /dev/ttyACM0" + # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else + set MAVLINK_FLAGS "-r 1000 -d /dev/ttyS0" + + # Exit from nsh to free port for mavlink + set EXIT_ON_END yes else - # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s - if [ $TTYS1_BUSY == yes ] - then - # Start MAVLink on ttyS0, because FMU ttyS1 pins configured as something else - set MAVLINK_FLAGS "-r 1000 -d /dev/ttyS0" - - # Exit from nsh to free port for mavlink - set EXIT_ON_END yes - else - # Start MAVLink on default port: ttyS1 - set MAVLINK_FLAGS "-r 1000" - fi + # Start MAVLink on default port: ttyS1 + set MAVLINK_FLAGS "-r 1000" fi fi @@ -436,18 +432,26 @@ then # # Sensors, Logging, GPS # - echo "[init] Start sensors" sh /etc/init.d/rc.sensors if [ $HIL == no ] then echo "[init] Start logging" sh /etc/init.d/rc.logging - - echo "[init] Start GPS" - gps start fi + if [ $GPS == yes ] + then + echo "[init] Start GPS" + if [ $GPS_FAKE == yes ] + then + echo "[init] Faking GPS" + gps start -f + else + gps start + fi + fi + # # Start up ARDrone Motor interface # @@ -514,7 +518,7 @@ then then set MAV_TYPE 13 fi - if [ $MIXER == hexa_cox ] + if [ $MIXER == FMU_hexa_cox ] then set MAV_TYPE 13 fi @@ -561,7 +565,7 @@ then echo "[init] Starting addons script: $EXTRAS_FILE" sh $EXTRAS_FILE else - echo "[init] Addons script not found: $EXTRAS_FILE" + echo "[init] No addons script: $EXTRAS_FILE" fi if [ $EXIT_ON_END == yes ] diff --git a/ROMFS/px4fmu_common/mixers/hexa_cox.mix b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix index 497786feb..497786feb 100644 --- a/ROMFS/px4fmu_common/mixers/hexa_cox.mix +++ b/ROMFS/px4fmu_common/mixers/FMU_hexa_cox.mix diff --git a/ROMFS/px4fmu_common/mixers/easystar.mix b/ROMFS/px4fmu_common/mixers/easystar.mix new file mode 100644 index 000000000..0051ffdbb --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/easystar.mix @@ -0,0 +1,31 @@ +EASYSTAR / EASYSTAR II MIXER +============================ + +Aileron mixer +------------- +One output - would be easy to add support for 2 servos + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 0 10000 10000 0 -10000 10000 + +Elevator mixer +------------ + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 1 -10000 -10000 0 -10000 10000 + +Rudder mixer +------------ + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 2 -10000 -10000 0 -10000 10000 + +Motor speed mixer +----------------- + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 3 0 20000 -10000 -10000 10000 |