diff options
Diffstat (limited to 'mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h')
-rw-r--r-- | mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h b/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h deleted file mode 100644 index 8ceb8888f..000000000 --- a/mavlink/include/mavlink/v1.0/common/mavlink_msg_set_quad_motors_setpoint.h +++ /dev/null @@ -1,265 +0,0 @@ -// MESSAGE SET_QUAD_MOTORS_SETPOINT PACKING - -#define MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT 60 - -typedef struct __mavlink_set_quad_motors_setpoint_t -{ - uint16_t motor_front_nw; ///< Front motor in + configuration, front left motor in x configuration - uint16_t motor_right_ne; ///< Right motor in + configuration, front right motor in x configuration - uint16_t motor_back_se; ///< Back motor in + configuration, back right motor in x configuration - uint16_t motor_left_sw; ///< Left motor in + configuration, back left motor in x configuration - uint8_t target_system; ///< System ID of the system that should set these motor commands -} mavlink_set_quad_motors_setpoint_t; - -#define MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN 9 -#define MAVLINK_MSG_ID_60_LEN 9 - -#define MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC 30 -#define MAVLINK_MSG_ID_60_CRC 30 - - - -#define MAVLINK_MESSAGE_INFO_SET_QUAD_MOTORS_SETPOINT { \ - "SET_QUAD_MOTORS_SETPOINT", \ - 5, \ - { { "motor_front_nw", NULL, MAVLINK_TYPE_UINT16_T, 0, 0, offsetof(mavlink_set_quad_motors_setpoint_t, motor_front_nw) }, \ - { "motor_right_ne", NULL, MAVLINK_TYPE_UINT16_T, 0, 2, offsetof(mavlink_set_quad_motors_setpoint_t, motor_right_ne) }, \ - { "motor_back_se", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_set_quad_motors_setpoint_t, motor_back_se) }, \ - { "motor_left_sw", NULL, MAVLINK_TYPE_UINT16_T, 0, 6, offsetof(mavlink_set_quad_motors_setpoint_t, motor_left_sw) }, \ - { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 8, offsetof(mavlink_set_quad_motors_setpoint_t, target_system) }, \ - } \ -} - - -/** - * @brief Pack a set_quad_motors_setpoint message - * @param system_id ID of this system - * @param component_id ID of this component (e.g. 200 for IMU) - * @param msg The MAVLink message to compress the data into - * - * @param target_system System ID of the system that should set these motor commands - * @param motor_front_nw Front motor in + configuration, front left motor in x configuration - * @param motor_right_ne Right motor in + configuration, front right motor in x configuration - * @param motor_back_se Back motor in + configuration, back right motor in x configuration - * @param motor_left_sw Left motor in + configuration, back left motor in x configuration - * @return length of the message in bytes (excluding serial stream start sign) - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, - uint8_t target_system, uint16_t motor_front_nw, uint16_t motor_right_ne, uint16_t motor_back_se, uint16_t motor_left_sw) -{ -#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS - char buf[MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN]; - _mav_put_uint16_t(buf, 0, motor_front_nw); - _mav_put_uint16_t(buf, 2, motor_right_ne); - _mav_put_uint16_t(buf, 4, motor_back_se); - _mav_put_uint16_t(buf, 6, motor_left_sw); - _mav_put_uint8_t(buf, 8, target_system); - - memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#else - mavlink_set_quad_motors_setpoint_t packet; - packet.motor_front_nw = motor_front_nw; - packet.motor_right_ne = motor_right_ne; - packet.motor_back_se = motor_back_se; - packet.motor_left_sw = motor_left_sw; - packet.target_system = target_system; - - memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif - - msg->msgid = MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT; -#if MAVLINK_CRC_EXTRA - return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); -#else - return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif -} - -/** - * @brief Pack a set_quad_motors_setpoint message on a channel - * @param system_id ID of this system - * @param component_id ID of this component (e.g. 200 for IMU) - * @param chan The MAVLink channel this message will be sent over - * @param msg The MAVLink message to compress the data into - * @param target_system System ID of the system that should set these motor commands - * @param motor_front_nw Front motor in + configuration, front left motor in x configuration - * @param motor_right_ne Right motor in + configuration, front right motor in x configuration - * @param motor_back_se Back motor in + configuration, back right motor in x configuration - * @param motor_left_sw Left motor in + configuration, back left motor in x configuration - * @return length of the message in bytes (excluding serial stream start sign) - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, - mavlink_message_t* msg, - uint8_t target_system,uint16_t motor_front_nw,uint16_t motor_right_ne,uint16_t motor_back_se,uint16_t motor_left_sw) -{ -#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS - char buf[MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN]; - _mav_put_uint16_t(buf, 0, motor_front_nw); - _mav_put_uint16_t(buf, 2, motor_right_ne); - _mav_put_uint16_t(buf, 4, motor_back_se); - _mav_put_uint16_t(buf, 6, motor_left_sw); - _mav_put_uint8_t(buf, 8, target_system); - - memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#else - mavlink_set_quad_motors_setpoint_t packet; - packet.motor_front_nw = motor_front_nw; - packet.motor_right_ne = motor_right_ne; - packet.motor_back_se = motor_back_se; - packet.motor_left_sw = motor_left_sw; - packet.target_system = target_system; - - memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif - - msg->msgid = MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT; -#if MAVLINK_CRC_EXTRA - return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); -#else - return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif -} - -/** - * @brief Encode a set_quad_motors_setpoint struct - * - * @param system_id ID of this system - * @param component_id ID of this component (e.g. 200 for IMU) - * @param msg The MAVLink message to compress the data into - * @param set_quad_motors_setpoint C-struct to read the message contents from - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_set_quad_motors_setpoint_t* set_quad_motors_setpoint) -{ - return mavlink_msg_set_quad_motors_setpoint_pack(system_id, component_id, msg, set_quad_motors_setpoint->target_system, set_quad_motors_setpoint->motor_front_nw, set_quad_motors_setpoint->motor_right_ne, set_quad_motors_setpoint->motor_back_se, set_quad_motors_setpoint->motor_left_sw); -} - -/** - * @brief Encode a set_quad_motors_setpoint struct on a channel - * - * @param system_id ID of this system - * @param component_id ID of this component (e.g. 200 for IMU) - * @param chan The MAVLink channel this message will be sent over - * @param msg The MAVLink message to compress the data into - * @param set_quad_motors_setpoint C-struct to read the message contents from - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_set_quad_motors_setpoint_t* set_quad_motors_setpoint) -{ - return mavlink_msg_set_quad_motors_setpoint_pack_chan(system_id, component_id, chan, msg, set_quad_motors_setpoint->target_system, set_quad_motors_setpoint->motor_front_nw, set_quad_motors_setpoint->motor_right_ne, set_quad_motors_setpoint->motor_back_se, set_quad_motors_setpoint->motor_left_sw); -} - -/** - * @brief Send a set_quad_motors_setpoint message - * @param chan MAVLink channel to send the message - * - * @param target_system System ID of the system that should set these motor commands - * @param motor_front_nw Front motor in + configuration, front left motor in x configuration - * @param motor_right_ne Right motor in + configuration, front right motor in x configuration - * @param motor_back_se Back motor in + configuration, back right motor in x configuration - * @param motor_left_sw Left motor in + configuration, back left motor in x configuration - */ -#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS - -static inline void mavlink_msg_set_quad_motors_setpoint_send(mavlink_channel_t chan, uint8_t target_system, uint16_t motor_front_nw, uint16_t motor_right_ne, uint16_t motor_back_se, uint16_t motor_left_sw) -{ -#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS - char buf[MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN]; - _mav_put_uint16_t(buf, 0, motor_front_nw); - _mav_put_uint16_t(buf, 2, motor_right_ne); - _mav_put_uint16_t(buf, 4, motor_back_se); - _mav_put_uint16_t(buf, 6, motor_left_sw); - _mav_put_uint8_t(buf, 8, target_system); - -#if MAVLINK_CRC_EXTRA - _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); -#else - _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, buf, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif -#else - mavlink_set_quad_motors_setpoint_t packet; - packet.motor_front_nw = motor_front_nw; - packet.motor_right_ne = motor_right_ne; - packet.motor_back_se = motor_back_se; - packet.motor_left_sw = motor_left_sw; - packet.target_system = target_system; - -#if MAVLINK_CRC_EXTRA - _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, (const char *)&packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_CRC); -#else - _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT, (const char *)&packet, MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif -#endif -} - -#endif - -// MESSAGE SET_QUAD_MOTORS_SETPOINT UNPACKING - - -/** - * @brief Get field target_system from set_quad_motors_setpoint message - * - * @return System ID of the system that should set these motor commands - */ -static inline uint8_t mavlink_msg_set_quad_motors_setpoint_get_target_system(const mavlink_message_t* msg) -{ - return _MAV_RETURN_uint8_t(msg, 8); -} - -/** - * @brief Get field motor_front_nw from set_quad_motors_setpoint message - * - * @return Front motor in + configuration, front left motor in x configuration - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_get_motor_front_nw(const mavlink_message_t* msg) -{ - return _MAV_RETURN_uint16_t(msg, 0); -} - -/** - * @brief Get field motor_right_ne from set_quad_motors_setpoint message - * - * @return Right motor in + configuration, front right motor in x configuration - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_get_motor_right_ne(const mavlink_message_t* msg) -{ - return _MAV_RETURN_uint16_t(msg, 2); -} - -/** - * @brief Get field motor_back_se from set_quad_motors_setpoint message - * - * @return Back motor in + configuration, back right motor in x configuration - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_get_motor_back_se(const mavlink_message_t* msg) -{ - return _MAV_RETURN_uint16_t(msg, 4); -} - -/** - * @brief Get field motor_left_sw from set_quad_motors_setpoint message - * - * @return Left motor in + configuration, back left motor in x configuration - */ -static inline uint16_t mavlink_msg_set_quad_motors_setpoint_get_motor_left_sw(const mavlink_message_t* msg) -{ - return _MAV_RETURN_uint16_t(msg, 6); -} - -/** - * @brief Decode a set_quad_motors_setpoint message into a struct - * - * @param msg The message to decode - * @param set_quad_motors_setpoint C-struct to decode the message contents into - */ -static inline void mavlink_msg_set_quad_motors_setpoint_decode(const mavlink_message_t* msg, mavlink_set_quad_motors_setpoint_t* set_quad_motors_setpoint) -{ -#if MAVLINK_NEED_BYTE_SWAP - set_quad_motors_setpoint->motor_front_nw = mavlink_msg_set_quad_motors_setpoint_get_motor_front_nw(msg); - set_quad_motors_setpoint->motor_right_ne = mavlink_msg_set_quad_motors_setpoint_get_motor_right_ne(msg); - set_quad_motors_setpoint->motor_back_se = mavlink_msg_set_quad_motors_setpoint_get_motor_back_se(msg); - set_quad_motors_setpoint->motor_left_sw = mavlink_msg_set_quad_motors_setpoint_get_motor_left_sw(msg); - set_quad_motors_setpoint->target_system = mavlink_msg_set_quad_motors_setpoint_get_target_system(msg); -#else - memcpy(set_quad_motors_setpoint, _MAV_PAYLOAD(msg), MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT_LEN); -#endif -} |