diff options
Diffstat (limited to 'nuttx-configs/px4fmu-v1/tools/px_uploader.py')
-rwxr-xr-x | nuttx-configs/px4fmu-v1/tools/px_uploader.py | 416 |
1 files changed, 0 insertions, 416 deletions
diff --git a/nuttx-configs/px4fmu-v1/tools/px_uploader.py b/nuttx-configs/px4fmu-v1/tools/px_uploader.py deleted file mode 100755 index 3b23f4f83..000000000 --- a/nuttx-configs/px4fmu-v1/tools/px_uploader.py +++ /dev/null @@ -1,416 +0,0 @@ -#!/usr/bin/env python -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Serial firmware uploader for the PX4FMU bootloader -# -# The PX4 firmware file is a JSON-encoded Python object, containing -# metadata fields and a zlib-compressed base64-encoded firmware image. -# -# The uploader uses the following fields from the firmware file: -# -# image -# The firmware that will be uploaded. -# image_size -# The size of the firmware in bytes. -# board_id -# The board for which the firmware is intended. -# board_revision -# Currently only used for informational purposes. -# - -import sys -import argparse -import binascii -import serial -import os -import struct -import json -import zlib -import base64 -import time -import array - -from sys import platform as _platform - -class firmware(object): - '''Loads a firmware file''' - - desc = {} - image = bytes() - crctab = array.array('I', [ - 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, - 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, - 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, - 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, - 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, - 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, - 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, - 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, - 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, - 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, - 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, - 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, - 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, - 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, - 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, - 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, - 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, - 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, - 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, - 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, - 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, - 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, - 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, - 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, - 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, - 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, - 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, - 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, - 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, - 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, - 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, - 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d ]) - crcpad = bytearray('\xff\xff\xff\xff') - - def __init__(self, path): - - # read the file - f = open(path, "r") - self.desc = json.load(f) - f.close() - - self.image = bytearray(zlib.decompress(base64.b64decode(self.desc['image']))) - - # pad image to 4-byte length - while ((len(self.image) % 4) != 0): - self.image.append('\xff') - - def property(self, propname): - return self.desc[propname] - - def __crc32(self, bytes, state): - for byte in bytes: - index = (state ^ byte) & 0xff - state = self.crctab[index] ^ (state >> 8) - return state - - def crc(self, padlen): - state = self.__crc32(self.image, int(0)) - for i in range(len(self.image), (padlen - 1), 4): - state = self.__crc32(self.crcpad, state) - return state - -class uploader(object): - '''Uploads a firmware file to the PX FMU bootloader''' - - # protocol bytes - INSYNC = chr(0x12) - EOC = chr(0x20) - - # reply bytes - OK = chr(0x10) - FAILED = chr(0x11) - INVALID = chr(0x13) # rev3+ - - # command bytes - NOP = chr(0x00) # guaranteed to be discarded by the bootloader - GET_SYNC = chr(0x21) - GET_DEVICE = chr(0x22) - CHIP_ERASE = chr(0x23) - CHIP_VERIFY = chr(0x24) # rev2 only - PROG_MULTI = chr(0x27) - READ_MULTI = chr(0x28) # rev2 only - GET_CRC = chr(0x29) # rev3+ - REBOOT = chr(0x30) - - INFO_BL_REV = chr(1) # bootloader protocol revision - BL_REV_MIN = 2 # minimum supported bootloader protocol - BL_REV_MAX = 3 # maximum supported bootloader protocol - INFO_BOARD_ID = chr(2) # board type - INFO_BOARD_REV = chr(3) # board revision - INFO_FLASH_SIZE = chr(4) # max firmware size in bytes - - PROG_MULTI_MAX = 60 # protocol max is 255, must be multiple of 4 - READ_MULTI_MAX = 60 # protocol max is 255, something overflows with >= 64 - - def __init__(self, portname, baudrate): - # open the port, keep the default timeout short so we can poll quickly - self.port = serial.Serial(portname, baudrate, timeout=0.25) - - def close(self): - if self.port is not None: - self.port.close() - - def __send(self, c): -# print("send " + binascii.hexlify(c)) - self.port.write(str(c)) - - def __recv(self, count = 1): - c = self.port.read(count) - if len(c) < 1: - raise RuntimeError("timeout waiting for data") -# print("recv " + binascii.hexlify(c)) - return c - - def __recv_int(self): - raw = self.__recv(4) - val = struct.unpack("<I", raw) - return val[0] - - def __getSync(self): - self.port.flush() - c = self.__recv() - if c is not self.INSYNC: - raise RuntimeError("unexpected 0x%x instead of INSYNC" % ord(c)) - c = self.__recv() - if c == self.INVALID: - raise RuntimeError("bootloader reports INVALID OPERATION") - if c == self.FAILED: - raise RuntimeError("bootloader reports OPERATION FAILED") - if c != self.OK: - raise RuntimeError("unexpected response 0x%x instead of OK" % ord(c)) - - # attempt to get back into sync with the bootloader - def __sync(self): - # send a stream of ignored bytes longer than the longest possible conversation - # that we might still have in progress -# self.__send(uploader.NOP * (uploader.PROG_MULTI_MAX + 2)) - self.port.flushInput() - self.__send(uploader.GET_SYNC - + uploader.EOC) - self.__getSync() - -# def __trySync(self): -# c = self.__recv() -# if (c != self.INSYNC): -# #print("unexpected 0x%x instead of INSYNC" % ord(c)) -# return False; -# c = self.__recv() -# if (c != self.OK): -# #print("unexpected 0x%x instead of OK" % ord(c)) -# return False -# return True - - # send the GET_DEVICE command and wait for an info parameter - def __getInfo(self, param): - self.__send(uploader.GET_DEVICE + param + uploader.EOC) - value = self.__recv_int() - self.__getSync() - return value - - # send the CHIP_ERASE command and wait for the bootloader to become ready - def __erase(self): - self.__send(uploader.CHIP_ERASE - + uploader.EOC) - # erase is very slow, give it 10s - deadline = time.time() + 10 - while time.time() < deadline: - try: - self.__getSync() - return - except RuntimeError as ex: - # we timed out, that's OK - continue - - raise RuntimeError("timed out waiting for erase") - - # send a PROG_MULTI command to write a collection of bytes - def __program_multi(self, data): - self.__send(uploader.PROG_MULTI - + chr(len(data))) - self.__send(data) - self.__send(uploader.EOC) - self.__getSync() - - # verify multiple bytes in flash - def __verify_multi(self, data): - self.__send(uploader.READ_MULTI - + chr(len(data)) - + uploader.EOC) - self.port.flush() - programmed = self.__recv(len(data)) - if programmed != data: - print("got " + binascii.hexlify(programmed)) - print("expect " + binascii.hexlify(data)) - return False - self.__getSync() - return True - - # send the reboot command - def __reboot(self): - self.__send(uploader.REBOOT - + uploader.EOC) - self.port.flush() - - # v3+ can report failure if the first word flash fails - if self.bl_rev >= 3: - self.__getSync() - - # split a sequence into a list of size-constrained pieces - def __split_len(self, seq, length): - return [seq[i:i+length] for i in range(0, len(seq), length)] - - # upload code - def __program(self, fw): - code = fw.image - groups = self.__split_len(code, uploader.PROG_MULTI_MAX) - for bytes in groups: - self.__program_multi(bytes) - - # verify code - def __verify_v2(self, fw): - self.__send(uploader.CHIP_VERIFY - + uploader.EOC) - self.__getSync() - code = fw.image - groups = self.__split_len(code, uploader.READ_MULTI_MAX) - for bytes in groups: - if (not self.__verify_multi(bytes)): - raise RuntimeError("Verification failed") - - def __verify_v3(self, fw): - expect_crc = fw.crc(self.fw_maxsize) - self.__send(uploader.GET_CRC - + uploader.EOC) - report_crc = self.__recv_int() - self.__getSync() - if report_crc != expect_crc: - print("Expected 0x%x" % expect_crc) - print("Got 0x%x" % report_crc) - raise RuntimeError("Program CRC failed") - - # get basic data about the board - def identify(self): - # make sure we are in sync before starting - self.__sync() - - # get the bootloader protocol ID first - self.bl_rev = self.__getInfo(uploader.INFO_BL_REV) - if (self.bl_rev < uploader.BL_REV_MIN) or (self.bl_rev > uploader.BL_REV_MAX): - print("Unsupported bootloader protocol %d" % uploader.INFO_BL_REV) - raise RuntimeError("Bootloader protocol mismatch") - - self.board_type = self.__getInfo(uploader.INFO_BOARD_ID) - self.board_rev = self.__getInfo(uploader.INFO_BOARD_REV) - self.fw_maxsize = self.__getInfo(uploader.INFO_FLASH_SIZE) - - # upload the firmware - def upload(self, fw): - # Make sure we are doing the right thing - if self.board_type != fw.property('board_id'): - raise RuntimeError("Firmware not suitable for this board (run 'make configure_px4fmu && make clean' or 'make configure_px4io && make clean' to reconfigure).") - if self.fw_maxsize < fw.property('image_size'): - raise RuntimeError("Firmware image is too large for this board") - - print("erase...") - self.__erase() - - print("program...") - self.__program(fw) - - print("verify...") - if self.bl_rev == 2: - self.__verify_v2(fw) - else: - self.__verify_v3(fw) - - print("done, rebooting.") - self.__reboot() - self.port.close() - - -# Parse commandline arguments -parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.") -parser.add_argument('--port', action="store", required=True, help="Serial port(s) to which the FMU may be attached") -parser.add_argument('--baud', action="store", type=int, default=115200, help="Baud rate of the serial port (default is 115200), only required for true serial ports.") -parser.add_argument('firmware', action="store", help="Firmware file to be uploaded") -args = parser.parse_args() - -# Load the firmware file -fw = firmware(args.firmware) -print("Loaded firmware for %x,%x, waiting for the bootloader..." % (fw.property('board_id'), fw.property('board_revision'))) - -# Spin waiting for a device to show up -while True: - for port in args.port.split(","): - - #print("Trying %s" % port) - - # create an uploader attached to the port - try: - if "linux" in _platform: - # Linux, don't open Mac OS and Win ports - if not "COM" in port and not "tty.usb" in port: - up = uploader(port, args.baud) - elif "darwin" in _platform: - # OS X, don't open Windows and Linux ports - if not "COM" in port and not "ACM" in port: - up = uploader(port, args.baud) - elif "win" in _platform: - # Windows, don't open POSIX ports - if not "/" in port: - up = uploader(port, args.baud) - except: - # open failed, rate-limit our attempts - time.sleep(0.05) - - # and loop to the next port - continue - - # port is open, try talking to it - try: - # identify the bootloader - up.identify() - print("Found board %x,%x bootloader rev %x on %s" % (up.board_type, up.board_rev, up.bl_rev, port)) - - except: - # most probably a timeout talking to the port, no bootloader - continue - - try: - # ok, we have a bootloader, try flashing it - up.upload(fw) - - except RuntimeError as ex: - - # print the error - print("ERROR: %s" % ex.args) - - finally: - # always close the port - up.close() - - # we could loop here if we wanted to wait for more boards... - sys.exit(0) |