diff options
Diffstat (limited to 'nuttx/configs/px4io')
-rwxr-xr-x | nuttx/configs/px4io/README.txt | 806 | ||||
-rw-r--r-- | nuttx/configs/px4io/common/Make.defs | 175 | ||||
-rwxr-xr-x | nuttx/configs/px4io/common/ld.script | 129 | ||||
-rwxr-xr-x | nuttx/configs/px4io/common/setenv.sh | 47 | ||||
-rwxr-xr-x | nuttx/configs/px4io/include/README.txt | 1 | ||||
-rwxr-xr-x | nuttx/configs/px4io/include/board.h | 172 | ||||
-rw-r--r-- | nuttx/configs/px4io/include/drv_i2c_device.h | 42 | ||||
-rw-r--r-- | nuttx/configs/px4io/io/Make.defs | 3 | ||||
-rw-r--r-- | nuttx/configs/px4io/io/appconfig | 32 | ||||
-rwxr-xr-x | nuttx/configs/px4io/io/defconfig | 548 | ||||
-rwxr-xr-x | nuttx/configs/px4io/io/setenv.sh | 47 | ||||
-rw-r--r-- | nuttx/configs/px4io/nsh/Make.defs | 3 | ||||
-rw-r--r-- | nuttx/configs/px4io/nsh/appconfig | 43 | ||||
-rwxr-xr-x | nuttx/configs/px4io/nsh/defconfig | 565 | ||||
-rwxr-xr-x | nuttx/configs/px4io/nsh/setenv.sh | 47 | ||||
-rw-r--r-- | nuttx/configs/px4io/src/Makefile | 84 | ||||
-rw-r--r-- | nuttx/configs/px4io/src/README.txt | 1 | ||||
-rw-r--r-- | nuttx/configs/px4io/src/drv_i2c_device.c | 618 | ||||
-rw-r--r-- | nuttx/configs/px4io/src/empty.c | 4 |
19 files changed, 0 insertions, 3367 deletions
diff --git a/nuttx/configs/px4io/README.txt b/nuttx/configs/px4io/README.txt deleted file mode 100755 index 9b1615f42..000000000 --- a/nuttx/configs/px4io/README.txt +++ /dev/null @@ -1,806 +0,0 @@ -README -====== - -This README discusses issues unique to NuttX configurations for the -STMicro STM3210E-EVAL development board. - -Contents -======== - - - Development Environment - - GNU Toolchain Options - - IDEs - - NuttX buildroot Toolchain - - DFU and JTAG - - OpenOCD - - LEDs - - Temperature Sensor - - RTC - - STM3210E-EVAL-specific Configuration Options - - Configurations - -Development Environment -======================= - - Either Linux or Cygwin on Windows can be used for the development environment. - The source has been built only using the GNU toolchain (see below). Other - toolchains will likely cause problems. Testing was performed using the Cygwin - environment because the Raisonance R-Link emulatator and some RIDE7 development tools - were used and those tools works only under Windows. - -GNU Toolchain Options -===================== - - The NuttX make system has been modified to support the following different - toolchain options. - - 1. The CodeSourcery GNU toolchain, - 2. The devkitARM GNU toolchain, - 3. Raisonance GNU toolchain, or - 4. The NuttX buildroot Toolchain (see below). - - All testing has been conducted using the NuttX buildroot toolchain. However, - the make system is setup to default to use the devkitARM toolchain. To use - the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to - add one of the following configuration options to your .config (or defconfig) - file: - - CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_STM32_DEVKITARM=y : devkitARM under Windows - CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows - CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - - If you are not using CONFIG_STM32_BUILDROOT, then you may also have to modify - the PATH in the setenv.h file if your make cannot find the tools. - - NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are - Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot - toolchains are Cygwin and/or Linux native toolchains. There are several limitations - to using a Windows based toolchain in a Cygwin environment. The three biggest are: - - 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are - performed automatically in the Cygwin makefiles using the 'cygpath' utility - but you might easily find some new path problems. If so, check out 'cygpath -w' - - 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links - are used in Nuttx (e.g., include/arch). The make system works around these - problems for the Windows tools by copying directories instead of linking them. - But this can also cause some confusion for you: For example, you may edit - a file in a "linked" directory and find that your changes had no effect. - That is because you are building the copy of the file in the "fake" symbolic - directory. If you use a Windows toolchain, you should get in the habit of - making like this: - - make clean_context all - - An alias in your .bashrc file might make that less painful. - - 3. Dependencies are not made when using Windows versions of the GCC. This is - because the dependencies are generated using Windows pathes which do not - work with the Cygwin make. - - Support has been added for making dependencies with the windows-native toolchains. - That support can be enabled by modifying your Make.defs file as follows: - - - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)" - - If you have problems with the dependency build (for example, if you are not - building on C:), then you may need to modify tools/mkdeps.sh - - NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization - level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with - -Os. - - NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that - the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM - path or will get the wrong version of make. - -IDEs -==== - - NuttX is built using command-line make. It can be used with an IDE, but some - effort will be required to create the project (There is a simple RIDE project - in the RIDE subdirectory). - - Makefile Build - -------------- - Under Eclipse, it is pretty easy to set up an "empty makefile project" and - simply use the NuttX makefile to build the system. That is almost for free - under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty - makefile project in order to work with Windows (Google for "Eclipse Cygwin" - - there is a lot of help on the internet). - - Native Build - ------------ - Here are a few tips before you start that effort: - - 1) Select the toolchain that you will be using in your .config file - 2) Start the NuttX build at least one time from the Cygwin command line - before trying to create your project. This is necessary to create - certain auto-generated files and directories that will be needed. - 3) Set up include pathes: You will need include/, arch/arm/src/stm32, - arch/arm/src/common, arch/arm/src/armv7-m, and sched/. - 4) All assembly files need to have the definition option -D __ASSEMBLY__ - on the command line. - - Startup files will probably cause you some headaches. The NuttX startup file - is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX - one time from the Cygwin command line in order to obtain the pre-built - startup object needed by RIDE. - -NuttX buildroot Toolchain -========================= - - A GNU GCC-based toolchain is assumed. The files */setenv.sh should - be modified to point to the correct path to the Cortex-M3 GCC toolchain (if - different from the default in your PATH variable). - - If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX - SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). - This GNU toolchain builds and executes in the Linux or Cygwin environment. - - 1. You must have already configured Nuttx in <some-dir>/nuttx. - - cd tools - ./configure.sh stm3210e-eval/<sub-dir> - - 2. Download the latest buildroot package into <some-dir> - - 3. unpack the buildroot tarball. The resulting directory may - have versioning information on it like buildroot-x.y.z. If so, - rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. - - 4. cd <some-dir>/buildroot - - 5. cp configs/cortexm3-defconfig-4.3.3 .config - - 6. make oldconfig - - 7. make - - 8. Edit setenv.h, if necessary, so that the PATH variable includes - the path to the newly built binaries. - - See the file configs/README.txt in the buildroot source tree. That has more - detailed PLUS some special instructions that you will need to follow if you are - building a Cortex-M3 toolchain for Cygwin under Windows. - -DFU and JTAG -============ - - Enbling Support for the DFU Bootloader - -------------------------------------- - The linker files in these projects can be configured to indicate that you - will be loading code using STMicro built-in USB Device Firmware Upgrade (DFU) - loader or via some JTAG emulator. You can specify the DFU bootloader by - adding the following line: - - CONFIG_STM32_DFU=y - - to your .config file. Most of the configurations in this directory are set - up to use the DFU loader. - - If CONFIG_STM32_DFU is defined, the code will not be positioned at the beginning - of FLASH (0x08000000) but will be offset to 0x08003000. This offset is needed - to make space for the DFU loader and 0x08003000 is where the DFU loader expects - to find new applications at boot time. If you need to change that origin for some - other bootloader, you will need to edit the file(s) ld.script.dfu for each - configuration. - - The DFU SE PC-based software is available from the STMicro website, - http://www.st.com. General usage instructions: - - 1. Convert the NuttX Intel Hex file (nuttx.ihx) into a special DFU - file (nuttx.dfu)... see below for details. - 2. Connect the STM3210E-EVAL board to your computer using a USB - cable. - 3. Start the DFU loader on the STM3210E-EVAL board. You do this by - resetting the board while holding the "Key" button. Windows should - recognize that the DFU loader has been installed. - 3. Run the DFU SE program to load nuttx.dfu into FLASH. - - What if the DFU loader is not in FLASH? The loader code is available - inside of the Demo dirctory of the USBLib ZIP file that can be downloaded - from the STMicro Website. You can build it using RIDE (or other toolchains); - you will need a JTAG emulator to burn it into FLASH the first time. - - In order to use STMicro's built-in DFU loader, you will have to get - the NuttX binary into a special format with a .dfu extension. The - DFU SE PC_based software installation includes a file "DFU File Manager" - conversion program that a file in Intel Hex format to the special DFU - format. When you successfully build NuttX, you will find a file called - nutt.ihx in the top-level directory. That is the file that you should - provide to the DFU File Manager. You will need to rename it to nuttx.hex - in order to find it with the DFU File Manager. You will end up with - a file called nuttx.dfu that you can use with the STMicro DFU SE program. - - Enabling JTAG - ------------- - If you are not using the DFU, then you will probably also need to enable - JTAG support. By default, all JTAG support is disabled but there NuttX - configuration options to enable JTAG in various different ways. - - These configurations effect the setting of the SWJ_CFG[2:0] bits in the AFIO - MAPR register. These bits are used to configure the SWJ and trace alternate function I/Os. The SWJ (SerialWire JTAG) supports JTAG or SWD access to the - Cortex debug port. The default state in this port is for all JTAG support - to be disable. - - CONFIG_STM32_JTAG_FULL_ENABLE - sets SWJ_CFG[2:0] to 000 which enables full - SWJ (JTAG-DP + SW-DP) - - CONFIG_STM32_JTAG_NOJNTRST_ENABLE - sets SWJ_CFG[2:0] to 001 which enable - full SWJ (JTAG-DP + SW-DP) but without JNTRST. - - CONFIG_STM32_JTAG_SW_ENABLE - sets SWJ_CFG[2:0] to 010 which would set JTAG-DP - disabled and SW-DP enabled - - The default setting (none of the above defined) is SWJ_CFG[2:0] set to 100 - which disable JTAG-DP and SW-DP. - -OpenOCD -======= - -I have also used OpenOCD with the STM3210E-EVAL. In this case, I used -the Olimex USB ARM OCD. See the script in configs/stm3210e-eval/tools/oocd.sh -for more information. Using the script: - -1) Start the OpenOCD GDB server - - cd <nuttx-build-directory> - configs/stm3210e-eval/tools/oocd.sh $PWD - -2) Load Nuttx - - cd <nuttx-built-directory> - arm-none-eabi-gdb nuttx - gdb> target remote localhost:3333 - gdb> mon reset - gdb> mon halt - gdb> load nuttx - -3) Running NuttX - - gdb> mon reset - gdb> c - -LEDs -==== - -The STM3210E-EVAL board has four LEDs labeled LD1, LD2, LD3 and LD4 on the -board.. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is -defined. In that case, the usage by the board port is defined in -include/board.h and src/up_leds.c. The LEDs are used to encode OS-related -events as follows: - - SYMBOL Meaning LED1* LED2 LED3 LED4 - ---------------- ----------------------- ----- ----- ----- ----- - LED_STARTED NuttX has been started ON OFF OFF OFF - LED_HEAPALLOCATE Heap has been allocated OFF ON OFF OFF - LED_IRQSENABLED Interrupts enabled ON ON OFF OFF - LED_STACKCREATED Idle stack created OFF OFF ON OFF - LED_INIRQ In an interrupt** ON N/C N/C OFF - LED_SIGNAL In a signal handler*** N/C ON N/C OFF - LED_ASSERTION An assertion failed ON ON N/C OFF - LED_PANIC The system has crashed N/C N/C N/C ON - LED_IDLE STM32 is is sleep mode (Optional, not used) - - * If LED1, LED2, LED3 are statically on, then NuttX probably failed to boot - and these LEDs will give you some indication of where the failure was - ** The normal state is LED3 ON and LED1 faintly glowing. This faint glow - is because of timer interupts that result in the LED being illuminated - on a small proportion of the time. -*** LED2 may also flicker normally if signals are processed. - -Temperature Sensor -================== - -Support for the on-board LM-75 temperature sensor is available. This supported -has been verified, but has not been included in any of the available the -configurations. To set up the temperature sensor, add the following to the -NuttX configuration file - - CONFIG_I2C=y - CONFIG_I2C_LM75=y - -Then you can implement logic like the following to use the temperature sensor: - - #include <nuttx/sensors/lm75.h> - #include <arch/board/board.h> - - ret = stm32_lm75initialize("/dev/temp"); /* Register the temperature sensor */ - fd = open("/dev/temp", O_RDONLY); /* Open the temperature sensor device */ - ret = ioctl(fd, SNIOC_FAHRENHEIT, 0); /* Select Fahrenheit */ - bytesread = read(fd, buffer, 8*sizeof(b16_t)); /* Read temperature samples */ - -More complex temperature sensor operations are also available. See the IOCTAL -commands enumerated in include/nuttx/sensors/lm75.h. Also read the descriptions -of the stm32_lm75initialize() and stm32_lm75attach() interfaces in the -arch/board/board.h file (sames as configs/stm3210e-eval/include/board.h). - -RTC -=== - - The STM32 RTC may configured using the following settings. - - CONFIG_RTC - Enables general support for a hardware RTC. Specific - architectures may require other specific settings. - CONFIG_RTC_HIRES - The typical RTC keeps time to resolution of 1 - second, usually supporting a 32-bit time_t value. In this case, - the RTC is used to "seed" the normal NuttX timer and the - NuttX timer provides for higher resoution time. If CONFIG_RTC_HIRES - is enabled in the NuttX configuration, then the RTC provides higher - resolution time and completely replaces the system timer for purpose of - date and time. - CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the - frequency of the high resolution RTC must be provided. If CONFIG_RTC_HIRES - is not defined, CONFIG_RTC_FREQUENCY is assumed to be one. - CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an alarm. - A callback function will be executed when the alarm goes off - - In hi-res mode, the STM32 RTC operates only at 16384Hz. Overflow interrupts - are handled when the 32-bit RTC counter overflows every 3 days and 43 minutes. - A BKP register is incremented on each overflow interrupt creating, effectively, - a 48-bit RTC counter. - - In the lo-res mode, the RTC operates at 1Hz. Overflow interrupts are not handled - (because the next overflow is not expected until the year 2106. - - WARNING: Overflow interrupts are lost whenever the STM32 is powered down. The - overflow interrupt may be lost even if the STM32 is powered down only momentarily. - Therefore hi-res solution is only useful in systems where the power is always on. - -STM3210E-EVAL-specific Configuration Options -============================================ - - CONFIG_ARCH - Identifies the arch/ subdirectory. This should - be set to: - - CONFIG_ARCH=arm - - CONFIG_ARCH_family - For use in C code: - - CONFIG_ARCH_ARM=y - - CONFIG_ARCH_architecture - For use in C code: - - CONFIG_ARCH_CORTEXM3=y - - CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory - - CONFIG_ARCH_CHIP=stm32 - - CONFIG_ARCH_CHIP_name - For use in C code to identify the exact - chip: - - CONFIG_ARCH_CHIP_STM32F103ZET6 - - CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock - configuration features. - - CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n - - CONFIG_ARCH_BOARD - Identifies the configs subdirectory and - hence, the board that supports the particular chip or SoC. - - CONFIG_ARCH_BOARD=stm3210e_eval (for the STM3210E-EVAL development board) - - CONFIG_ARCH_BOARD_name - For use in C code - - CONFIG_ARCH_BOARD_STM3210E_EVAL=y - - CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation - of delay loops - - CONFIG_ENDIAN_BIG - define if big endian (default is little - endian) - - CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case): - - CONFIG_DRAM_SIZE=0x00010000 (64Kb) - - CONFIG_DRAM_START - The start address of installed DRAM - - CONFIG_DRAM_START=0x20000000 - - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - - CONFIG_ARCH_IRQPRIO - The STM32F103Z supports interrupt prioritization - - CONFIG_ARCH_IRQPRIO=y - - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that - have LEDs - - CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt - stack. If defined, this symbol is the size of the interrupt - stack in bytes. If not defined, the user task stacks will be - used during interrupt handling. - - CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions - - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. - - CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that - cause a 100 second delay during boot-up. This 100 second delay - serves no purpose other than it allows you to calibratre - CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure - the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until - the delay actually is 100 seconds. - - Individual subsystems can be enabled: - AHB - --- - CONFIG_STM32_DMA1 - CONFIG_STM32_DMA2 - CONFIG_STM32_CRC - CONFIG_STM32_FSMC - CONFIG_STM32_SDIO - - APB1 - ---- - CONFIG_STM32_TIM2 - CONFIG_STM32_TIM3 - CONFIG_STM32_TIM4 - CONFIG_STM32_TIM5 - CONFIG_STM32_TIM6 - CONFIG_STM32_TIM7 - CONFIG_STM32_WWDG - CONFIG_STM32_SPI2 - CONFIG_STM32_SPI4 - CONFIG_STM32_USART2 - CONFIG_STM32_USART3 - CONFIG_STM32_UART4 - CONFIG_STM32_UART5 - CONFIG_STM32_I2C1 - CONFIG_STM32_I2C2 - CONFIG_STM32_USB - CONFIG_STM32_CAN - CONFIG_STM32_BKP - CONFIG_STM32_PWR - CONFIG_STM32_DAC1 - CONFIG_STM32_DAC2 - CONFIG_STM32_USB - - APB2 - ---- - CONFIG_STM32_ADC1 - CONFIG_STM32_ADC2 - CONFIG_STM32_TIM1 - CONFIG_STM32_SPI1 - CONFIG_STM32_TIM8 - CONFIG_STM32_USART1 - CONFIG_STM32_ADC3 - - Timer and I2C devices may need to the following to force power to be applied - unconditionally at power up. (Otherwise, the device is powered when it is - initialized). - - CONFIG_STM32_FORCEPOWER - - Timer devices may be used for different purposes. One special purpose is - to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn - is defined (as above) then the following may also be defined to indicate that - the timer is intended to be used for pulsed output modulation, ADC conversion, - or DAC conversion. Note that ADC/DAC require two definition: Not only do you have - to assign the timer (n) for used by the ADC or DAC, but then you also have to - configure which ADC or DAC (m) it is assigned to. - - CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,8 - CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,8 - CONFIG_STM32_TIMn_ADCm Reserve timer n to trigger ADCm, n=1,..,8, m=1,..,3 - CONFIG_STM32_TIMn_DAC Reserve timer n for use by DAC, n=1,..,8 - CONFIG_STM32_TIMn_DACm Reserve timer n to trigger DACm, n=1,..,8, m=1,..,2 - - For each timer that is enabled for PWM usage, we need the following additional - configuration settings: - - CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} - - NOTE: The STM32 timers are each capable of generating different signals on - each of the four channels with different duty cycles. That capability is - not supported by this driver: Only one output channel per timer. - - Alternate pin mappings (should not be used with the STM3210E-EVAL board): - - CONFIG_STM32_TIM1_FULL_REMAP - CONFIG_STM32_TIM1_PARTIAL_REMAP - CONFIG_STM32_TIM2_FULL_REMAP - CONFIG_STM32_TIM2_PARTIAL_REMAP_1 - CONFIG_STM32_TIM2_PARTIAL_REMAP_2 - CONFIG_STM32_TIM3_FULL_REMAP - CONFIG_STM32_TIM3_PARTIAL_REMAP - CONFIG_STM32_TIM4_REMAP - CONFIG_STM32_USART1_REMAP - CONFIG_STM32_USART2_REMAP - CONFIG_STM32_USART3_FULL_REMAP - CONFIG_STM32_USART3_PARTIAL_REMAP - CONFIG_STM32_SPI1_REMAP - CONFIG_STM32_SPI3_REMAP - CONFIG_STM32_I2C1_REMAP - CONFIG_STM32_CAN1_FULL_REMAP - CONFIG_STM32_CAN1_PARTIAL_REMAP - CONFIG_STM32_CAN2_REMAP - - JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): - CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) - CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) - but without JNTRST. - CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled - - STM32F103Z specific device driver settings - - CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART - m (m=4,5) for the console and ttys0 (default is the USART1). - CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. - This specific the size of the receive buffer - CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before - being sent. This specific the size of the transmit buffer - CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be - CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. - CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity - CONFIG_U[S]ARTn_2STOP - Two stop bits - - CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI - support. Non-interrupt-driven, poll-waiting is recommended if the - interrupt rate would be to high in the interrupt driven case. - CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance. - Cannot be used with CONFIG_STM32_SPI_INTERRUPT. - - CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO - and CONFIG_STM32_DMA2. - CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128 - CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority. - Default: Medium - CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: - 4-bit transfer mode. - - STM3210E-EVAL CAN Configuration - - CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or - CONFIG_STM32_CAN2 must also be defined) - CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default - Standard 11-bit IDs. - CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages. - Default: 8 - CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests. - Default: 4 - CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback - mode for testing. The STM32 CAN driver does support loopback mode. - CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined. - CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined. - CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 - CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7 - CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an - dump of all CAN registers. - - STM3210E-EVAL LCD Hardware Configuration - - CONFIG_LCD_LANDSCAPE - Define for 320x240 display "landscape" - support. Default is this 320x240 "landscape" orientation - (this setting is informative only... not used). - CONFIG_LCD_PORTRAIT - Define for 240x320 display "portrait" - orientation support. In this orientation, the STM3210E-EVAL's - LCD ribbon cable is at the bottom of the display. Default is - 320x240 "landscape" orientation. - CONFIG_LCD_RPORTRAIT - Define for 240x320 display "reverse - portrait" orientation support. In this orientation, the - STM3210E-EVAL's LCD ribbon cable is at the top of the display. - Default is 320x240 "landscape" orientation. - CONFIG_LCD_BACKLIGHT - Define to support a backlight. - CONFIG_LCD_PWM - If CONFIG_STM32_TIM1 is also defined, then an - adjustable backlight will be provided using timer 1 to generate - various pulse widthes. The granularity of the settings is - determined by CONFIG_LCD_MAXPOWER. If CONFIG_LCD_PWM (or - CONFIG_STM32_TIM1) is not defined, then a simple on/off backlight - is provided. - CONFIG_LCD_RDSHIFT - When reading 16-bit gram data, there appears - to be a shift in the returned data. This value fixes the offset. - Default 5. - - The LCD driver dynamically selects the LCD based on the reported LCD - ID value. However, code size can be reduced by suppressing support for - individual LCDs using: - - CONFIG_STM32_AM240320_DISABLE - CONFIG_STM32_SPFD5408B_DISABLE - CONFIG_STM32_R61580_DISABLE - -Configurations -============== - -Each STM3210E-EVAL configuration is maintained in a sudirectory and -can be selected as follow: - - cd tools - ./configure.sh stm3210e-eval/<subdir> - cd - - . ./setenv.sh - -Where <subdir> is one of the following: - - buttons: - -------- - - Uses apps/examples/buttons to exercise STM3210E-EVAL buttons and - button interrupts. - - CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows - - composite - --------- - - This configuration exercises a composite USB interface consisting - of a CDC/ACM device and a USB mass storage device. This configuration - uses apps/examples/composite. - - nsh and nsh2: - ------------ - Configure the NuttShell (nsh) located at examples/nsh. - - Differences between the two NSH configurations: - - =========== ======================= ================================ - nsh nsh2 - =========== ======================= ================================ - Toolchain: NuttX buildroot for Codesourcery for Windows (1) - Linux or Cygwin (1,2) - ----------- ----------------------- -------------------------------- - Loader: DfuSe DfuSe - ----------- ----------------------- -------------------------------- - Serial Debug output: USART1 Debug output: USART1 - Console: NSH output: USART1 NSH output: USART1 (3) - ----------- ----------------------- -------------------------------- - microSD Yes Yes - Support - ----------- ----------------------- -------------------------------- - FAT FS CONFIG_FAT_LCNAME=y CONFIG_FAT_LCNAME=y - Config CONFIG_FAT_LFN=n CONFIG_FAT_LFN=y (4) - ----------- ----------------------- -------------------------------- - Support for No Yes - Built-in - Apps - ----------- ----------------------- -------------------------------- - Built-in None apps/examples/nx - Apps apps/examples/nxhello - apps/examples/usbstorage (5) - =========== ======================= ================================ - - (1) You will probably need to modify nsh/setenv.sh or nsh2/setenv.sh - to set up the correct PATH variable for whichever toolchain you - may use. - (2) Since DfuSe is assumed, this configuration may only work under - Cygwin without modification. - (3) When any other device other than /dev/console is used for a user - interface, (1) linefeeds (\n) will not be expanded to carriage return - / linefeeds \r\n). You will need to configure your terminal program - to account for this. And (2) input is not automatically echoed so - you will have to turn local echo on. - (4) Microsoft holds several patents related to the design of - long file names in the FAT file system. Please refer to the - details in the top-level COPYING file. Please do not use FAT - long file name unless you are familiar with these patent issues. - (5) When built as an NSH add-on command (CONFIG_EXAMPLES_USBMSC_BUILTIN=y), - Caution should be used to assure that the SD drive is not in use when - the USB storage device is configured. Specifically, the SD driver - should be unmounted like: - - nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Card is mounted in NSH - ... - nsh> umount /mnd/sdcard # Unmount before connecting USB!!! - nsh> msconn # Connect the USB storage device - ... - nsh> msdis # Disconnect USB storate device - nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Restore the mount - - Failure to do this could result in corruption of the SD card format. - - nx: - --- - An example using the NuttX graphics system (NX). This example - focuses on general window controls, movement, mouse and keyboard - input. - - CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait - - nxlines: - ------ - Another example using the NuttX graphics system (NX). This - example focuses on placing lines on the background in various - orientations. - - CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait - - nxtext: - ------ - Another example using the NuttX graphics system (NX). This - example focuses on placing text on the background while pop-up - windows occur. Text should continue to update normally with - or without the popup windows present. - - CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin - CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait - - NOTE: When I tried building this example with the CodeSourcery - tools, I got a hardfault inside of its libgcc. I haven't - retested since then, but beware if you choose to change the - toolchain. - - ostest: - ------ - This configuration directory, performs a simple OS test using - examples/ostest. By default, this project assumes that you are - using the DFU bootloader. - - CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin - - RIDE - ---- - This configuration builds a trivial bring-up binary. It is - useful only because it words with the RIDE7 IDE and R-Link debugger. - - CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows - - usbserial: - --------- - This configuration directory exercises the USB serial class - driver at examples/usbserial. See examples/README.txt for - more information. - - CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin - - USB debug output can be enabled as by changing the following - settings in the configuration file: - - -CONFIG_DEBUG=n - -CONFIG_DEBUG_VERBOSE=n - -CONFIG_DEBUG_USB=n - +CONFIG_DEBUG=y - +CONFIG_DEBUG_VERBOSE=y - +CONFIG_DEBUG_USB=y - - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n - -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n - -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n - -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - +CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=y - +CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=y - +CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=y - +CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=y - +CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=y - - By default, the usbserial example uses the Prolific PL2303 - serial/USB converter emulation. The example can be modified - to use the CDC/ACM serial class by making the following changes - to the configuration file: - - -CONFIG_PL2303=y - +CONFIG_PL2303=n - - -CONFIG_CDCACM=n - +CONFIG_CDCACM=y - - The example can also be converted to use the alternative - USB serial example at apps/examples/usbterm by changing the - following: - - -CONFIGURED_APPS += examples/usbserial - +CONFIGURED_APPS += examples/usbterm - - In either the original appconfig file (before configuring) - or in the final apps/.config file (after configuring). - - usbstorage: - ---------- - This configuration directory exercises the USB mass storage - class driver at examples/usbstorage. See examples/README.txt for - more information. - - CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin - diff --git a/nuttx/configs/px4io/common/Make.defs b/nuttx/configs/px4io/common/Make.defs deleted file mode 100644 index d2490d84e..000000000 --- a/nuttx/configs/px4io/common/Make.defs +++ /dev/null @@ -1,175 +0,0 @@ -############################################################################ -# configs/px4fmu/common/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Generic Make.defs for the PX4FMU -# Do not specify/use this file directly - it is included by config-specific -# Make.defs in the per-config directories. -# - -include ${TOPDIR}/tools/Config.mk - -# -# We only support building with the ARM bare-metal toolchain from -# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS. -# -CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI - -include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -MAXOPTIMIZATION ?= -O3 -ARCHCPUFLAGS = -mcpu=cortex-m3 \ - -mthumb \ - -march=armv7-m - -# enable precise stack overflow tracking -#INSTRUMENTATIONDEFINES = -finstrument-functions \ -# -ffixed-r10 - -# use our linker script -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)}" -else - ifeq ($(PX4_WINTOOL),y) - # Windows-native toolchains (MSYS) - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT) - else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT) - endif -endif - -# tool versions -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -# optimisation flags -ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \ - -fno-strict-aliasing \ - -fno-strength-reduce \ - -fomit-frame-pointer \ - -funsafe-math-optimizations \ - -fno-builtin-printf \ - -ffunction-sections \ - -fdata-sections - -ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") -ARCHOPTIMIZATION += -g -endif - -ARCHCFLAGS = -std=gnu99 -ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x -ARCHWARNINGS = -Wall \ - -Wextra \ - -Wdouble-promotion \ - -Wshadow \ - -Wfloat-equal \ - -Wframe-larger-than=1024 \ - -Wpointer-arith \ - -Wlogical-op \ - -Wmissing-declarations \ - -Wpacked \ - -Wno-unused-parameter -# -Wcast-qual - generates spurious noreturn attribute warnings, try again later -# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code -# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives - -ARCHCWARNINGS = $(ARCHWARNINGS) \ - -Wbad-function-cast \ - -Wstrict-prototypes \ - -Wold-style-declaration \ - -Wmissing-parameter-type \ - -Wmissing-prototypes \ - -Wnested-externs \ - -Wunsuffixed-float-constants -ARCHWARNINGSXX = $(ARCHWARNINGS) -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -# this seems to be the only way to add linker flags -EXTRA_LIBS += --warn-common \ - --gc-sections - -CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -# produce partially-linked $1 from files in $2 -define PRELINK - @echo "PRELINK: $1" - $(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1 -endef - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/px4io/common/ld.script b/nuttx/configs/px4io/common/ld.script deleted file mode 100755 index 69c2f9cb2..000000000 --- a/nuttx/configs/px4io/common/ld.script +++ /dev/null @@ -1,129 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nsh/ld.script - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F100C8 has 64Kb of FLASH beginning at address 0x0800:0000 and - * 8Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08001000, LENGTH = 60K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K -} - -OUTPUT_ARCH(arm) -ENTRY(__start) /* treat __start as the anchor for dead code stripping */ -EXTERN(_vectors) /* force the vectors to be included in the output */ - -/* - * Ensure that abort() is present in the final object. The exception handling - * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). - */ -EXTERN(abort) - -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - /* - * Init functions (static constructors and the like) - */ - .init_section : { - _sinit = ABSOLUTE(.); - KEEP(*(.init_array .init_array.*)) - _einit = ABSOLUTE(.); - } > flash - - .ARM.extab : { - *(.ARM.extab*) - } > flash - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } > flash - __exidx_end = ABSOLUTE(.); - - _eronly = ABSOLUTE(.); - - /* The STM32F100CB has 8Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/px4io/common/setenv.sh b/nuttx/configs/px4io/common/setenv.sh deleted file mode 100755 index ff9a4bf8a..000000000 --- a/nuttx/configs/px4io/common/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/stm3210e-eval/dfu/setenv.sh -# -# Copyright (C) 2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" -export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io/include/README.txt b/nuttx/configs/px4io/include/README.txt deleted file mode 100755 index 2264a80aa..000000000 --- a/nuttx/configs/px4io/include/README.txt +++ /dev/null @@ -1 +0,0 @@ -This directory contains header files unique to the PX4IO board. diff --git a/nuttx/configs/px4io/include/board.h b/nuttx/configs/px4io/include/board.h deleted file mode 100755 index fcbc93620..000000000 --- a/nuttx/configs/px4io/include/board.h +++ /dev/null @@ -1,172 +0,0 @@ -/************************************************************************************ - * configs/px4io/include/board.h - * include/arch/board/board.h - * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_BOARD_BOARD_H -#define __ARCH_BOARD_BOARD_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> -#ifndef __ASSEMBLY__ -# include <stdint.h> -# include <stdbool.h> -#endif -#include <stm32_rcc.h> -#include <stm32_sdio.h> -#include <stm32_internal.h> - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Clocking *************************************************************************/ - -/* On-board crystal frequency is 24MHz (HSE) */ - -#define STM32_BOARD_XTAL 24000000ul - -/* Use the HSE output as the system clock */ - -#define STM32_SYSCLK_SW RCC_CFGR_SW_HSE -#define STM32_SYSCLK_SWS RCC_CFGR_SWS_HSE -#define STM32_SYSCLK_FREQUENCY STM32_BOARD_XTAL - -/* AHB clock (HCLK) is SYSCLK (24MHz) */ - -#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK -#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY -#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ - -/* APB2 clock (PCLK2) is HCLK (24MHz) */ - -#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK -#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY -#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-4 */ - -/* APB2 timer 1 will receive PCLK2. */ - -#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) -#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY) - -/* APB1 clock (PCLK1) is HCLK (24MHz) */ - -#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK -#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY) - -/* All timers run off PCLK */ - -#define STM32_APB1_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) -#define STM32_APB1_TIM2_CLKIN (STM32_PCLK1_FREQUENCY) -#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY) -#define STM32_APB1_TIM4_CLKIN (STM32_PCLK1_FREQUENCY) - -/* - * Some of the USART pins are not available; override the GPIO - * definitions with an invalid pin configuration. - */ -#undef GPIO_USART2_CTS -#define GPIO_USART2_CTS 0xffffffff -#undef GPIO_USART2_RTS -#define GPIO_USART2_RTS 0xffffffff -#undef GPIO_USART2_CK -#define GPIO_USART2_CK 0xffffffff -#undef GPIO_USART3_TX -#define GPIO_USART3_TX 0xffffffff -#undef GPIO_USART3_CK -#define GPIO_USART3_CK 0xffffffff -#undef GPIO_USART3_CTS -#define GPIO_USART3_CTS 0xffffffff -#undef GPIO_USART3_RTS -#define GPIO_USART3_RTS 0xffffffff - -/* - * High-resolution timer - */ -#ifdef CONFIG_HRT_TIMER -# define HRT_TIMER 1 /* use timer1 for the HRT */ -# define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ -#endif - -/* - * PPM - * - * PPM input is handled by the HRT timer. - * - * Pin is PA8, timer 1, channel 1 - */ -#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM) -# define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ -# define GPIO_PPM_IN GPIO_TIM1_CH1IN -#endif - -/************************************************************************************ - * Public Data - ************************************************************************************/ - -#ifndef __ASSEMBLY__ - -#undef EXTERN -#if defined(__cplusplus) -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/************************************************************************************ - * Public Function Prototypes - ************************************************************************************/ -/************************************************************************************ - * Name: stm32_boardinitialize - * - * Description: - * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -EXTERN void stm32_boardinitialize(void); - -#if defined(__cplusplus) -} -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/px4io/include/drv_i2c_device.h b/nuttx/configs/px4io/include/drv_i2c_device.h deleted file mode 100644 index 02582bc09..000000000 --- a/nuttx/configs/px4io/include/drv_i2c_device.h +++ /dev/null @@ -1,42 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - - /** - * @file A simple, polled I2C slave-mode driver. - * - * The master writes to and reads from a byte buffer, which the caller - * can update inbetween calls to the FSM. - */ - -extern void i2c_fsm_init(uint8_t *buffer, size_t buffer_size); -extern bool i2c_fsm(void); diff --git a/nuttx/configs/px4io/io/Make.defs b/nuttx/configs/px4io/io/Make.defs deleted file mode 100644 index 369772d03..000000000 --- a/nuttx/configs/px4io/io/Make.defs +++ /dev/null @@ -1,3 +0,0 @@ -include ${TOPDIR}/.config - -include $(TOPDIR)/configs/px4io/common/Make.defs diff --git a/nuttx/configs/px4io/io/appconfig b/nuttx/configs/px4io/io/appconfig deleted file mode 100644 index 48a41bcdb..000000000 --- a/nuttx/configs/px4io/io/appconfig +++ /dev/null @@ -1,32 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ diff --git a/nuttx/configs/px4io/io/defconfig b/nuttx/configs/px4io/io/defconfig deleted file mode 100755 index bb937cf4e..000000000 --- a/nuttx/configs/px4io/io/defconfig +++ /dev/null @@ -1,548 +0,0 @@ -############################################################################ -# configs/px4io/nsh/defconfig -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip family. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP="stm32" -CONFIG_ARCH_CHIP_STM32F100C8=y -CONFIG_ARCH_BOARD="px4io" -CONFIG_ARCH_BOARD_PX4IO=y -CONFIG_BOARD_LOOPSPERMSEC=2000 -CONFIG_DRAM_SIZE=0x00002000 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=y -CONFIG_ARCH_MATH_H=y - -CONFIG_ARMV7M_CMNVECTOR=y - -# -# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): -# -# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG -# -# JTAG Enable options: -# -# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# but without JNTRST. -# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled -# -CONFIG_STM32_DFU=n -CONFIG_STM32_JTAG_FULL_ENABLE=y -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=n - -# -# Individual subsystems can be enabled: -# -# AHB: -CONFIG_STM32_DMA1=y -CONFIG_STM32_DMA2=n -CONFIG_STM32_CRC=n -# APB1: -# Timers 2,3 and 4 are owned by the PWM driver -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_USART2=y -CONFIG_STM32_USART3=y -CONFIG_STM32_I2C1=y -CONFIG_STM32_I2C2=n -CONFIG_STM32_BKP=n -CONFIG_STM32_PWR=n -CONFIG_STM32_DAC=n -# APB2: -# We use our own ADC driver, but leave this on for clocking purposes. -CONFIG_STM32_ADC1=y -CONFIG_STM32_ADC2=n -# TIM1 is owned by the HRT -CONFIG_STM32_TIM1=n -CONFIG_STM32_SPI1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=y -CONFIG_STM32_ADC3=n - - -# -# STM32F100 specific serial device driver settings -# -# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the -# console and ttys0 (default is the USART1). -# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_USARTn_2STOP - Two stop bits -# -CONFIG_SERIAL_TERMIOS=y -CONFIG_STANDARD_SERIAL=y - -CONFIG_USART1_SERIAL_CONSOLE=y -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=64 -CONFIG_USART2_TXBUFSIZE=64 -CONFIG_USART3_TXBUFSIZE=64 - -CONFIG_USART1_RXBUFSIZE=64 -CONFIG_USART2_RXBUFSIZE=64 -CONFIG_USART3_RXBUFSIZE=64 - -CONFIG_USART1_BAUD=115200 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 - -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 - -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 - -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 - -CONFIG_USART1_RXDMA=y -SERIAL_HAVE_CONSOLE_DMA=y -# Conflicts with I2C1 DMA -CONFIG_USART2_RXDMA=n -CONFIG_USART3_RXDMA=y - -# -# PX4IO specific driver settings -# -# CONFIG_HRT_TIMER -# Enables the high-resolution timer. The board definition must -# set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/ -# compare channels to be used. -# CONFIG_HRT_PPM -# Enables R/C PPM input using the HRT. The board definition must -# set HRT_PPM_CHANNEL to the timer capture/compare channel to be -# used, and define GPIO_PPM_IN to configure the appropriate timer -# GPIO. -# CONFIG_PWM_SERVO -# Enables the PWM servo driver. The driver configuration must be -# supplied by the board support at initialisation time. -# Note that USART2 must be disabled on the PX4 board for this to -# be available. -# -# -CONFIG_HRT_TIMER=y -CONFIG_HRT_PPM=y - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_HAVE_CXX - Enable support for C++ -# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support -# for initialization of static C++ instances for this architecture -# and for the selected toolchain (via up_cxxinitialize()). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# CONFIG_SCHED_WAITPID - Enable the waitpid() API -# CONFIG_SCHED_ATEXIT - Enabled the atexit() API -# -CONFIG_USER_ENTRYPOINT="user_start" -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=y -CONFIG_DEBUG_FS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_DEBUG_LCD=n -CONFIG_DEBUG_USB=n -CONFIG_DEBUG_NET=n -CONFIG_DEBUG_RTC=n -CONFIG_DEBUG_ANALOG=n -CONFIG_DEBUG_PWM=n -CONFIG_DEBUG_CAN=n -CONFIG_DEBUG_I2C=n -CONFIG_DEBUG_INPUT=n - -CONFIG_MSEC_PER_TICK=1 -CONFIG_HAVE_CXX=y -CONFIG_HAVE_CXXINITIALIZE=y -CONFIG_MM_REGIONS=1 -CONFIG_MM_SMALL=y -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=0 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=8 -CONFIG_START_YEAR=1970 -CONFIG_START_MONTH=1 -CONFIG_START_DAY=1 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -# this eats ~1KiB of RAM ... work out why -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=y -CONFIG_FDCLONE_STDIO=y -CONFIG_SDCLONE_DISABLE=y -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 -CONFIG_SCHED_WAITPID=n -CONFIG_SCHED_ATEXIT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled -# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added -# to force automatic, line-oriented flushing the output buffer -# for putc(), fputc(), putchar(), puts(), fputs(), printf(), -# fprintf(), and vfprintf(). When a newline is encountered in -# the output string, the output buffer will be flushed. This -# (slightly) increases the NuttX footprint but supports the kind -# of behavior that people expect for printf(). -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=4 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=2 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=12 -CONFIG_STDIO_BUFFER_SIZE=32 -CONFIG_STDIO_LINEBUFFER=n -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=0 - - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_BUILTIN_APPS - Support external registered, -# "named" applications that can be executed from the NSH -# command line (see apps/README.txt for more information). -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# - -# Disable NSH completely -CONFIG_NSH_CONSOLE=n - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the STM3210E-EVAL which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=1200 -CONFIG_PTHREAD_STACK_MIN=512 -CONFIG_PTHREAD_STACK_DEFAULT=1024 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/px4io/io/setenv.sh b/nuttx/configs/px4io/io/setenv.sh deleted file mode 100755 index ff9a4bf8a..000000000 --- a/nuttx/configs/px4io/io/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/stm3210e-eval/dfu/setenv.sh -# -# Copyright (C) 2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" -export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io/nsh/Make.defs b/nuttx/configs/px4io/nsh/Make.defs deleted file mode 100644 index 87508e22e..000000000 --- a/nuttx/configs/px4io/nsh/Make.defs +++ /dev/null @@ -1,3 +0,0 @@ -include ${TOPDIR}/.config - -include $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/Make.defs diff --git a/nuttx/configs/px4io/nsh/appconfig b/nuttx/configs/px4io/nsh/appconfig deleted file mode 100644 index d5809a939..000000000 --- a/nuttx/configs/px4io/nsh/appconfig +++ /dev/null @@ -1,43 +0,0 @@ -############################################################################ -# configs/stm3210e-eval/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib -CONFIGURED_APPS += reboot - diff --git a/nuttx/configs/px4io/nsh/defconfig b/nuttx/configs/px4io/nsh/defconfig deleted file mode 100755 index 6f4e20869..000000000 --- a/nuttx/configs/px4io/nsh/defconfig +++ /dev/null @@ -1,565 +0,0 @@ -############################################################################ -# configs/px4io/nsh/defconfig -# -# Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=stm32 -CONFIG_ARCH_CHIP_STM32F100C8=y -CONFIG_ARCH_BOARD=px4io -CONFIG_ARCH_BOARD_PX4IO=y -CONFIG_BOARD_LOOPSPERMSEC=24000 -CONFIG_DRAM_SIZE=0x00002000 -CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n -CONFIG_ARMV7M_CMNVECTOR=y - -# -# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): -# -# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG -# -# JTAG Enable options: -# -# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) -# but without JNTRST. -# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled -# -CONFIG_STM32_DFU=n -CONFIG_STM32_JTAG_FULL_ENABLE=y -CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n -CONFIG_STM32_JTAG_SW_ENABLE=n - -# -# Individual subsystems can be enabled: -# AHB: -CONFIG_STM32_DMA1=n -CONFIG_STM32_DMA2=n -CONFIG_STM32_CRC=n -# APB1: -# Timers 2,3 and 4 are owned by the PWM driver -CONFIG_STM32_TIM2=n -CONFIG_STM32_TIM3=n -CONFIG_STM32_TIM4=n -CONFIG_STM32_TIM5=n -CONFIG_STM32_TIM6=n -CONFIG_STM32_TIM7=n -CONFIG_STM32_WWDG=n -CONFIG_STM32_SPI2=n -CONFIG_STM32_USART2=y -CONFIG_STM32_USART3=y -CONFIG_STM32_I2C1=y -CONFIG_STM32_I2C2=n -CONFIG_STM32_BKP=n -CONFIG_STM32_PWR=n -CONFIG_STM32_DAC=n -# APB2: -CONFIG_STM32_ADC1=y -CONFIG_STM32_ADC2=n -# TIM1 is owned by the HRT -CONFIG_STM32_TIM1=n -CONFIG_STM32_SPI1=n -CONFIG_STM32_TIM8=n -CONFIG_STM32_USART1=y -CONFIG_STM32_ADC3=n - -# -# Timer and I2C devices may need to the following to force power to be applied: -# -#CONFIG_STM32_FORCEPOWER=y - -# -# STM32F100 specific serial device driver settings -# -# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the -# console and ttys0 (default is the USART1). -# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_USARTn_2STOP - Two stop bits -# -CONFIG_USART1_SERIAL_CONSOLE=y -CONFIG_USART2_SERIAL_CONSOLE=n -CONFIG_USART3_SERIAL_CONSOLE=n - -CONFIG_USART1_TXBUFSIZE=64 -CONFIG_USART2_TXBUFSIZE=64 -CONFIG_USART3_TXBUFSIZE=64 - -CONFIG_USART1_RXBUFSIZE=64 -CONFIG_USART2_RXBUFSIZE=64 -CONFIG_USART3_RXBUFSIZE=64 - -CONFIG_USART1_BAUD=57600 -CONFIG_USART2_BAUD=115200 -CONFIG_USART3_BAUD=115200 - -CONFIG_USART1_BITS=8 -CONFIG_USART2_BITS=8 -CONFIG_USART3_BITS=8 - -CONFIG_USART1_PARITY=0 -CONFIG_USART2_PARITY=0 -CONFIG_USART3_PARITY=0 - -CONFIG_USART1_2STOP=0 -CONFIG_USART2_2STOP=0 -CONFIG_USART3_2STOP=0 - -# -# PX4IO specific driver settings -# -# CONFIG_HRT_TIMER -# Enables the high-resolution timer. The board definition must -# set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/ -# compare channels to be used. -# CONFIG_HRT_PPM -# Enables R/C PPM input using the HRT. The board definition must -# set HRT_PPM_CHANNEL to the timer capture/compare channel to be -# used, and define GPIO_PPM_IN to configure the appropriate timer -# GPIO. -# CONFIG_PWM_SERVO -# Enables the PWM servo driver. The driver configuration must be -# supplied by the board support at initialisation time. -# Note that USART2 must be disabled on the PX4 board for this to -# be available. -# -# -CONFIG_HRT_TIMER=y -CONFIG_HRT_PPM=y -CONFIG_PWM_SERVO=y - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_HAVE_CXX - Enable support for C++ -# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support -# for initialization of static C++ instances for this architecture -# and for the selected toolchain (via up_cxxinitialize()). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=y -CONFIG_HAVE_CXX=n -CONFIG_HAVE_CXXINITIALIZE=n -CONFIG_MM_REGIONS=1 -CONFIG_MM_SMALL=y -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2009 -CONFIG_START_MONTH=9 -CONFIG_START_DAY=21 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=y -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=512 -CONFIG_SIG_SIGWORK=4 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=4 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=2 -CONFIG_NFILE_DESCRIPTORS=6 -CONFIG_NFILE_STREAMS=4 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=1 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=3 -CONFIG_PREALLOC_TIMERS=1 - - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_BUILTIN_APPS - Support external registered, -# "named" applications that can be executed from the NSH -# command line (see apps/README.txt for more information). -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_BUILTIN_APPS=y -CONFIG_NSH_FILEIOSIZE=64 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=1 -CONFIG_NSH_DISABLESCRIPT=y -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=256 -#CONFIG_NSH_STACKSIZE=1024 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the STM3210E-EVAL which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=800 -CONFIG_USERMAIN_STACKSIZE=1024 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=512 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/px4io/nsh/setenv.sh b/nuttx/configs/px4io/nsh/setenv.sh deleted file mode 100755 index d83685192..000000000 --- a/nuttx/configs/px4io/nsh/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/stm3210e-eval/dfu/setenv.sh -# -# Copyright (C) 2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" -export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io/src/Makefile b/nuttx/configs/px4io/src/Makefile deleted file mode 100644 index bb9539d16..000000000 --- a/nuttx/configs/px4io/src/Makefile +++ /dev/null @@ -1,84 +0,0 @@ -############################################################################ -# configs/stm3210e-eval/src/Makefile -# -# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - --include $(TOPDIR)/Make.defs - -CFLAGS += -I$(TOPDIR)/sched - -ASRCS = -AOBJS = $(ASRCS:.S=$(OBJEXT)) - -CSRCS = empty.c - -COBJS = $(CSRCS:.c=$(OBJEXT)) - -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) - -ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src -ifeq ($(WINTOOL),y) - CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" -else - CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m -endif - -all: libboard$(LIBEXT) - -$(AOBJS): %$(OBJEXT): %.S - $(call ASSEMBLE, $<, $@) - -$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c - $(call COMPILE, $<, $@) - -libboard$(LIBEXT): $(OBJS) - $(call ARCHIVE, $@, $(OBJS)) - -.depend: Makefile $(SRCS) - @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep - @touch $@ - -depend: .depend - -clean: - $(call DELFILE, libboard$(LIBEXT)) - $(call CLEAN) - -distclean: clean - $(call DELFILE, Make.dep) - $(call DELFILE, .depend) - --include Make.dep diff --git a/nuttx/configs/px4io/src/README.txt b/nuttx/configs/px4io/src/README.txt deleted file mode 100644 index d4eda82fd..000000000 --- a/nuttx/configs/px4io/src/README.txt +++ /dev/null @@ -1 +0,0 @@ -This directory contains drivers unique to the STMicro STM3210E-EVAL development board. diff --git a/nuttx/configs/px4io/src/drv_i2c_device.c b/nuttx/configs/px4io/src/drv_i2c_device.c deleted file mode 100644 index 1f5931ae5..000000000 --- a/nuttx/configs/px4io/src/drv_i2c_device.c +++ /dev/null @@ -1,618 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - - /** - * @file A simple, polled I2C slave-mode driver. - * - * The master writes to and reads from a byte buffer, which the caller - * can update inbetween calls to the FSM. - */ - -#include <stdbool.h> - -#include "stm32_i2c.h" - -#include <string.h> - -/* - * I2C register definitions. - */ -#define I2C_BASE STM32_I2C1_BASE - -#define REG(_reg) (*(volatile uint32_t *)(I2C_BASE + _reg)) - -#define rCR1 REG(STM32_I2C_CR1_OFFSET) -#define rCR2 REG(STM32_I2C_CR2_OFFSET) -#define rOAR1 REG(STM32_I2C_OAR1_OFFSET) -#define rOAR2 REG(STM32_I2C_OAR2_OFFSET) -#define rDR REG(STM32_I2C_DR_OFFSET) -#define rSR1 REG(STM32_I2C_SR1_OFFSET) -#define rSR2 REG(STM32_I2C_SR2_OFFSET) -#define rCCR REG(STM32_I2C_CCR_OFFSET) -#define rTRISE REG(STM32_I2C_TRISE_OFFSET) - -/* - * "event" values (cr2 << 16 | cr1) as described in the ST DriverLib - */ -#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ -#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ -#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ -#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ - -/** - * States implemented by the I2C FSM. - */ -enum fsm_state { - BAD_PHASE, // must be zero, default exit on a bad state transition - - WAIT_FOR_MASTER, - - /* write from master */ - WAIT_FOR_COMMAND, - RECEIVE_COMMAND, - RECEIVE_DATA, - HANDLE_COMMAND, - - /* read from master */ - WAIT_TO_SEND, - SEND_STATUS, - SEND_DATA, - - NUM_STATES -}; - -/** - * Events recognised by the I2C FSM. - */ -enum fsm_event { - /* automatic transition */ - AUTO, - - /* write from master */ - ADDRESSED_WRITE, - BYTE_RECEIVED, - STOP_RECEIVED, - - /* read from master */ - ADDRESSED_READ, - BYTE_SENDABLE, - ACK_FAILED, - - NUM_EVENTS -}; - -/** - * Context for the I2C FSM - */ -static struct fsm_context { - enum fsm_state state; - - /* XXX want to eliminate these */ - uint8_t command; - uint8_t status; - - uint8_t *data_ptr; - uint32_t data_count; - - size_t buffer_size; - uint8_t *buffer; -} context; - -/** - * Structure defining one FSM state and its outgoing transitions. - */ -struct fsm_transition { - void (*handler)(void); - enum fsm_state next_state[NUM_EVENTS]; -}; - -static bool i2c_command_received; - -static void fsm_event(enum fsm_event event); - -static void go_bad(void); -static void go_wait_master(void); - -static void go_wait_command(void); -static void go_receive_command(void); -static void go_receive_data(void); -static void go_handle_command(void); - -static void go_wait_send(void); -static void go_send_status(void); -static void go_send_buffer(void); - -/** - * The FSM state graph. - */ -static const struct fsm_transition fsm[NUM_STATES] = { - [BAD_PHASE] = { - .handler = go_bad, - .next_state = { - [AUTO] = WAIT_FOR_MASTER, - }, - }, - - [WAIT_FOR_MASTER] = { - .handler = go_wait_master, - .next_state = { - [ADDRESSED_WRITE] = WAIT_FOR_COMMAND, - [ADDRESSED_READ] = WAIT_TO_SEND, - }, - }, - - /* write from master*/ - [WAIT_FOR_COMMAND] = { - .handler = go_wait_command, - .next_state = { - [BYTE_RECEIVED] = RECEIVE_COMMAND, - [STOP_RECEIVED] = WAIT_FOR_MASTER, - }, - }, - [RECEIVE_COMMAND] = { - .handler = go_receive_command, - .next_state = { - [BYTE_RECEIVED] = RECEIVE_DATA, - [STOP_RECEIVED] = HANDLE_COMMAND, - }, - }, - [RECEIVE_DATA] = { - .handler = go_receive_data, - .next_state = { - [BYTE_RECEIVED] = RECEIVE_DATA, - [STOP_RECEIVED] = HANDLE_COMMAND, - }, - }, - [HANDLE_COMMAND] = { - .handler = go_handle_command, - .next_state = { - [AUTO] = WAIT_FOR_MASTER, - }, - }, - - /* buffer send */ - [WAIT_TO_SEND] = { - .handler = go_wait_send, - .next_state = { - [BYTE_SENDABLE] = SEND_STATUS, - }, - }, - [SEND_STATUS] = { - .handler = go_send_status, - .next_state = { - [BYTE_SENDABLE] = SEND_DATA, - [ACK_FAILED] = WAIT_FOR_MASTER, - }, - }, - [SEND_DATA] = { - .handler = go_send_buffer, - .next_state = { - [BYTE_SENDABLE] = SEND_DATA, - [ACK_FAILED] = WAIT_FOR_MASTER, - }, - }, -}; - - -/* debug support */ -#if 1 -struct fsm_logentry { - char kind; - uint32_t code; -}; - -#define LOG_ENTRIES 32 -static struct fsm_logentry fsm_log[LOG_ENTRIES]; -int fsm_logptr; -#define LOG_NEXT(_x) (((_x) + 1) % LOG_ENTRIES) -#define LOGx(_kind, _code) \ - do { \ - fsm_log[fsm_logptr].kind = _kind; \ - fsm_log[fsm_logptr].code = _code; \ - fsm_logptr = LOG_NEXT(fsm_logptr); \ - fsm_log[fsm_logptr].kind = 0; \ - } while(0) - -#define LOG(_kind, _code) \ - do {\ - if (fsm_logptr < LOG_ENTRIES) { \ - fsm_log[fsm_logptr].kind = _kind; \ - fsm_log[fsm_logptr].code = _code; \ - fsm_logptr++;\ - }\ - }while(0) - -#else -#define LOG(_kind, _code) -#endif - - -static void i2c_setclock(uint32_t frequency); - -/** - * Initialise I2C - * - */ -void -i2c_fsm_init(uint8_t *buffer, size_t buffer_size) -{ - /* save the buffer */ - context.buffer = buffer; - context.buffer_size = buffer_size; - - // initialise the FSM - context.status = 0; - context.command = 0; - context.state = BAD_PHASE; - fsm_event(AUTO); - -#if 0 - // enable the i2c block clock and reset it - modifyreg32(STM32_RCC_APB1ENR, 0, RCC_APB1ENR_I2C1EN); - modifyreg32(STM32_RCC_APB1RSTR, 0, RCC_APB1RSTR_I2C1RST); - modifyreg32(STM32_RCC_APB1RSTR, RCC_APB1RSTR_I2C1RST, 0); - - // configure the i2c GPIOs - stm32_configgpio(GPIO_I2C1_SCL); - stm32_configgpio(GPIO_I2C1_SDA); - - // set the peripheral clock to match the APB clock - rCR2 = STM32_PCLK1_FREQUENCY / 1000000; - - // configure for 100kHz operation - i2c_setclock(100000); - - // enable i2c - rCR1 = I2C_CR1_PE; -#endif -} - -/** - * Run the I2C FSM for some period. - * - * @return True if the buffer has been updated by a command. - */ -bool -i2c_fsm(void) -{ - uint32_t event; - int idle_iterations = 0; - - for (;;) { - // handle bus error states by discarding the current operation - if (rSR1 & I2C_SR1_BERR) { - context.state = WAIT_FOR_MASTER; - rSR1 = ~I2C_SR1_BERR; - } - - // we do not anticipate over/underrun errors as clock-stretching is enabled - - // fetch the most recent event - event = ((rSR2 << 16) | rSR1) & 0x00ffffff; - - // generate FSM events based on I2C events - switch (event) { - case I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED: - LOG('w', 0); - fsm_event(ADDRESSED_WRITE); - break; - - case I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED: - LOG('r', 0); - fsm_event(ADDRESSED_READ); - break; - - case I2C_EVENT_SLAVE_BYTE_RECEIVED: - LOG('R', 0); - fsm_event(BYTE_RECEIVED); - break; - - case I2C_EVENT_SLAVE_STOP_DETECTED: - LOG('s', 0); - fsm_event(STOP_RECEIVED); - break; - - case I2C_EVENT_SLAVE_BYTE_TRANSMITTING: - //case I2C_EVENT_SLAVE_BYTE_TRANSMITTED: - LOG('T', 0); - fsm_event(BYTE_SENDABLE); - break; - - case I2C_EVENT_SLAVE_ACK_FAILURE: - LOG('a', 0); - fsm_event(ACK_FAILED); - break; - - default: - idle_iterations++; -// if ((event) && (event != 0x00020000)) -// LOG('e', event); - break; - } - - /* if we have just received something, drop out and let the caller handle it */ - if (i2c_command_received) { - i2c_command_received = false; - return true; - } - - /* if we have done nothing recently, drop out and let the caller have a slice */ - if (idle_iterations > 1000) - return false; - } -} - -/** - * Update the FSM with an event - * - * @param event New event. - */ -static void -fsm_event(enum fsm_event event) -{ - // move to the next state - context.state = fsm[context.state].next_state[event]; - - LOG('f', context.state); - - // call the state entry handler - if (fsm[context.state].handler) { - fsm[context.state].handler(); - } -} - -static void -go_bad() -{ - LOG('B', 0); - fsm_event(AUTO); -} - -/** - * Wait for the master to address us. - * - */ -static void -go_wait_master() -{ - // We currently don't have a command byte. - // - context.command = '\0'; - - // The data pointer starts pointing to the start of the data buffer. - // - context.data_ptr = context.buffer; - - // The data count is either: - // - the size of the data buffer - // - some value less than or equal the size of the data buffer during a write or a read - // - context.data_count = context.buffer_size; - - // (re)enable the peripheral, clear the stop event flag in - // case we just finished receiving data - rCR1 |= I2C_CR1_PE; - - // clear the ACK failed flag in case we just finished sending data - rSR1 = ~I2C_SR1_AF; -} - -/** - * Prepare to receive a command byte. - * - */ -static void -go_wait_command() -{ - // NOP -} - -/** - * Command byte has been received, save it and prepare to handle the data. - * - */ -static void -go_receive_command() -{ - - // fetch the command byte - context.command = (uint8_t)rDR; - LOG('c', context.command); - -} - -/** - * Receive a data byte. - * - */ -static void -go_receive_data() -{ - uint8_t d; - - // fetch the byte - d = (uint8_t)rDR; - LOG('d', d); - - // if we have somewhere to put it, do so - if (context.data_count) { - *context.data_ptr++ = d; - context.data_count--; - } -} - -/** - * Handle a command once the host is done sending it to us. - * - */ -static void -go_handle_command() -{ - // presume we are happy with the command - context.status = 0; - - // make a note that the buffer contains a fresh command - i2c_command_received = true; - - // kick along to the next state - fsm_event(AUTO); -} - -/** - * Wait to be able to send the status byte. - * - */ -static void -go_wait_send() -{ - // NOP -} - -/** - * Send the status byte. - * - */ -static void -go_send_status() -{ - rDR = context.status; - LOG('?', context.status); -} - -/** - * Send a data or pad byte. - * - */ -static void -go_send_buffer() -{ - if (context.data_count) { - LOG('D', *context.data_ptr); - rDR = *(context.data_ptr++); - context.data_count--; - } else { - LOG('-', 0); - rDR = 0xff; - } -} - -/* cribbed directly from the NuttX master driver */ -static void -i2c_setclock(uint32_t frequency) -{ - uint16_t cr1; - uint16_t ccr; - uint16_t trise; - uint16_t freqmhz; - uint16_t speed; - - /* Disable the selected I2C peripheral to configure TRISE */ - - cr1 = rCR1; - rCR1 &= ~I2C_CR1_PE; - - /* Update timing and control registers */ - - freqmhz = (uint16_t)(STM32_PCLK1_FREQUENCY / 1000000); - ccr = 0; - - /* Configure speed in standard mode */ - - if (frequency <= 100000) { - /* Standard mode speed calculation */ - - speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency << 1)); - - /* The CCR fault must be >= 4 */ - - if (speed < 4) { - /* Set the minimum allowed value */ - - speed = 4; - } - ccr |= speed; - - /* Set Maximum Rise Time for standard mode */ - - trise = freqmhz + 1; - - /* Configure speed in fast mode */ - } else { /* (frequency <= 400000) */ - /* Fast mode speed calculation with Tlow/Thigh = 16/9 */ - -#ifdef CONFIG_I2C_DUTY16_9 - speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency * 25)); - - /* Set DUTY and fast speed bits */ - - ccr |= (I2C_CCR_DUTY|I2C_CCR_FS); -#else - /* Fast mode speed calculation with Tlow/Thigh = 2 */ - - speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency * 3)); - - /* Set fast speed bit */ - - ccr |= I2C_CCR_FS; -#endif - - /* Verify that the CCR speed value is nonzero */ - - if (speed < 1) { - /* Set the minimum allowed value */ - - speed = 1; - } - ccr |= speed; - - /* Set Maximum Rise Time for fast mode */ - - trise = (uint16_t)(((freqmhz * 300) / 1000) + 1); - } - - /* Write the new values of the CCR and TRISE registers */ - - rCCR = ccr; - rTRISE = trise; - - /* Bit 14 of OAR1 must be configured and kept at 1 */ - - rOAR1 = I2C_OAR1_ONE); - - /* Re-enable the peripheral (or not) */ - - rCR1 = cr1; -} diff --git a/nuttx/configs/px4io/src/empty.c b/nuttx/configs/px4io/src/empty.c deleted file mode 100644 index ace900866..000000000 --- a/nuttx/configs/px4io/src/empty.c +++ /dev/null @@ -1,4 +0,0 @@ -/* - * There are no source files here, but libboard.a can't be empty, so - * we have this empty source file to keep it company. - */ |