diff options
Diffstat (limited to 'nuttx/drivers/mmcsd/mmcsd_sdio.h')
| -rw-r--r-- | nuttx/drivers/mmcsd/mmcsd_sdio.h | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/nuttx/drivers/mmcsd/mmcsd_sdio.h b/nuttx/drivers/mmcsd/mmcsd_sdio.h deleted file mode 100644 index 9e3794e25..000000000 --- a/nuttx/drivers/mmcsd/mmcsd_sdio.h +++ /dev/null @@ -1,339 +0,0 @@ -/******************************************************************************************** - * drivers/mmcsd/mmcsd_sdio.h - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ********************************************************************************************/ - -#ifndef __DRIVERS_MMCSD_MMCSD_SDIO_H -#define __DRIVERS_MMCSD_MMCSD_SDIO_H - -/******************************************************************************************** - * Included Files - ********************************************************************************************/ - -#include <nuttx/config.h> -#include <stdint.h> - -/******************************************************************************************** - * Pre-Processor Definitions - ********************************************************************************************/ - -/* CMD8 Argument: - * [31:12]: Reserved (shall be set to '0') - * [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) - * [7:0]: Check Pattern (recommended 0xaa) - * CMD8 Response: R7 - */ - -#define MMCSD_CMD8VOLTAGE_SHIFT (8) /* Bits 8-11: Supply voltage */ -#define MMCSD_CMD8VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_CMD8VOLTAGE_SHIFT) -# define MMCSD_CMD8VOLTAGE_27 ((uint32_t)0x01 << MMCSD_CMD8VOLTAGE_SHIFT) /* 2.7-3.6V */ -#define MMCSD_CMD8ECHO_SHIFT (0) /* Bits 0-7: Check pattern */ -#define MMCSD_CMD8ECHO_MASK ((uint32_t)0xff << MMCSD_CMD8ECHO_SHIFT) -# define MMCSD_CMD8CHECKPATTERN ((uint32_t)0xaa << MMCSD_CMD8ECHO_SHIFT) - -/* ACMD6 argument */ - -#define MMCSD_ACMD6_BUSWIDTH_1 ((uint32_t)0) /* Bus width = 1-bit */ -#define MMCSD_ACMD6_BUSWIDTH_4 ((uint32_t)2) /* Bus width = 4-bit */ - -/* ACMD41 argument */ - -#define MMCSD_ACMD41_VOLTAGEWINDOW ((uint32_t)0x80100000) -#define MMCSD_ACMD41_HIGHCAPACITY ((uint32_t)1 << 30) -#define MMCSD_ACMD41_STDCAPACITY ((uint32_t)0) - -/* ACMD42 argument */ - -#define MMCSD_ACMD42_CD_DISCONNECT ((uint32_t)0) /* Disconnect card detection logic */ -#define MMCSD_ACMD42_CD_CONNECT ((uint32_t)1) /* Connect card detection logic */ - -/* R1 Card Status bit definitions */ - -#define MMCSD_R1_OUTOFRANGE ((uint32_t)1 << 31) /* Bad argument */ -#define MMCSD_R1_ADDRESSERROR ((uint32_t)1 << 30) /* Bad address */ -#define MMCSD_R1_BLOCKLENERROR ((uint32_t)1 << 29) /* Bad block length */ -#define MMCSD_R1_ERASESEQERROR ((uint32_t)1 << 28) /* Erase cmd error */ -#define MMCSD_R1_ERASEPARAM ((uint32_t)1 << 27) /* Bad write blocks */ -#define MMCSD_R1_WPVIOLATION ((uint32_t)1 << 26) /* Erase access failure */ -#define MMCSD_R1_CARDISLOCKED ((uint32_t)1 << 25) /* Card is locked */ -#define MMCSD_R1_LOCKUNLOCKFAILED ((uint32_t)1 << 24) /* Password error */ -#define MMCSD_R1_COMCRCERROR ((uint32_t)1 << 23) /* CRC error */ -#define MMCSD_R1_ILLEGALCOMMAND ((uint32_t)1 << 22) /* Bad command */ -#define MMCSD_R1_CARDECCFAILED ((uint32_t)1 << 21) /* Failed to correct data */ -#define MMCSD_R1_CCERROR ((uint32_t)1 << 20) /* Card controller error */ -#define MMCSD_R1_ERROR ((uint32_t)1 << 19) /* General error */ -#define MMCSD_R1_UNDERRUN ((uint32_t)1 << 18) /* Underrun (MMC only) */ -#define MMCSD_R1_OVERRRUN ((uint32_t)1 << 17) /* Overrun (MMC only) */ -#define MMCSD_R1_CIDCSDOVERWRITE ((uint32_t)1 << 16) /* CID/CSD error */ -#define MMCSD_R1_WPERASESKIP ((uint32_t)1 << 15) /* Not all erased */ -#define MMCSD_R1_CARDECCDISABLED ((uint32_t)1 << 14) /* Internal ECC not used */ -#define MMCSD_R1_ERASERESET ((uint32_t)1 << 13) /* Reset sequence cleared */ -#define MMCSD_R1_STATE_SHIFT (9) /* Current card state */ -#define MMCSD_R1_STATE_MASK ((uint32_t)15 << MMCSD_R1_STATE_SHIFT) - /* Card identification mode states */ -# define MMCSD_R1_STATE_IDLE ((uint32_t)0 << MMCSD_R1_STATE_SHIFT) /* 0=Idle state */ -# define MMCSD_R1_STATE_READY ((uint32_t)1 << MMCSD_R1_STATE_SHIFT) /* 1=Ready state */ -# define MMCSD_R1_STATE_IDENT ((uint32_t)2 << MMCSD_R1_STATE_SHIFT) /* 2=Identification state */ - /* Data transfer states */ -# define MMCSD_R1_STATE_STBY ((uint32_t)3 << MMCSD_R1_STATE_SHIFT) /* 3=Standby state */ -# define MMCSD_R1_STATE_TRAN ((uint32_t)4 << MMCSD_R1_STATE_SHIFT) /* 4=Transfer state */ -# define MMCSD_R1_STATE_DATA ((uint32_t)5 << MMCSD_R1_STATE_SHIFT) /* 5=Sending data state */ -# define MMCSD_R1_STATE_RCV ((uint32_t)6 << MMCSD_R1_STATE_SHIFT) /* 6=Receiving data state */ -# define MMCSD_R1_STATE_PRG ((uint32_t)7 << MMCSD_R1_STATE_SHIFT) /* 7=Programming state */ -# define MMCSD_R1_STATE_DIS ((uint32_t)8 << MMCSD_R1_STATE_SHIFT) /* 8=Disconnect state */ -#define MMCSD_R1_READYFORDATA ((uint32_t)1 << 8) /* Buffer empty */ -#define MMCSD_R1_APPCMD ((uint32_t)1 << 5) /* Next CMD is ACMD */ -#define MMCSD_R1_AKESEQERROR ((uint32_t)1 << 3) /* Authentication error */ -#define MMCSD_R1_ERRORMASK ((uint32_t)0xfdffe008) /* Error mask */ - -#define IS_STATE(v,s) ((((uint32_t)v)&MMCSD_R1_STATE_MASK)==(s)) - -/* R3 (OCR) */ - -#define MMC_VDD_20_36 ((uint32_t)0x00ffff00) /* VDD voltage 2.0-3.6 */ - -#define MMCSD_VDD_145_150 ((uint32_t)1 << 0) /* VDD voltage 1.45 - 1.50 */ -#define MMCSD_VDD_150_155 ((uint32_t)1 << 1) /* VDD voltage 1.50 - 1.55 */ -#define MMCSD_VDD_155_160 ((uint32_t)1 << 2) /* VDD voltage 1.55 - 1.60 */ -#define MMCSD_VDD_160_165 ((uint32_t)1 << 3) /* VDD voltage 1.60 - 1.65 */ -#define MMCSD_VDD_165_170 ((uint32_t)1 << 4) /* VDD voltage 1.65 - 1.70 */ -#define MMCSD_VDD_17_18 ((uint32_t)1 << 5) /* VDD voltage 1.7 - 1.8 */ -#define MMCSD_VDD_18_19 ((uint32_t)1 << 6) /* VDD voltage 1.8 - 1.9 */ -#define MMCSD_VDD_19_20 ((uint32_t)1 << 7) /* VDD voltage 1.9 - 2.0 */ -#define MMCSD_VDD_20_21 ((uint32_t)1 << 8) /* VDD voltage 2.0-2.1 */ -#define MMCSD_VDD_21_22 ((uint32_t)1 << 9) /* VDD voltage 2.1-2.2 */ -#define MMCSD_VDD_22_23 ((uint32_t)1 << 10) /* VDD voltage 2.2-2.3 */ -#define MMCSD_VDD_23_24 ((uint32_t)1 << 11) /* VDD voltage 2.3-2.4 */ -#define MMCSD_VDD_24_25 ((uint32_t)1 << 12) /* VDD voltage 2.4-2.5 */ -#define MMCSD_VDD_25_26 ((uint32_t)1 << 13) /* VDD voltage 2.5-2.6 */ -#define MMCSD_VDD_26_27 ((uint32_t)1 << 14) /* VDD voltage 2.6-2.7 */ -#define MMCSD_VDD_27_28 ((uint32_t)1 << 15) /* VDD voltage 2.7-2.8 */ -#define MMCSD_VDD_28_29 ((uint32_t)1 << 16) /* VDD voltage 2.8-2.9 */ -#define MMCSD_VDD_29_30 ((uint32_t)1 << 17) /* VDD voltage 2.9-3.0 */ -#define MMCSD_VDD_30_31 ((uint32_t)1 << 18) /* VDD voltage 3.0-3.1 */ -#define MMCSD_VDD_31_32 ((uint32_t)1 << 19) /* VDD voltage 3.1-3.2 */ -#define MMCSD_VDD_32_33 ((uint32_t)1 << 20) /* VDD voltage 3.2-3.3 */ -#define MMCSD_VDD_33_34 ((uint32_t)1 << 21) /* VDD voltage 3.3-3.4 */ -#define MMCSD_VDD_34_35 ((uint32_t)1 << 22) /* VDD voltage 3.4-3.5 */ -#define MMCSD_VDD_35_36 ((uint32_t)1 << 23) /* VDD voltage 3.5-3.6 */ -#define MMCSD_R3_HIGHCAPACITY ((uint32_t)1 << 30) /* true: Card supports block addressing */ -#define MMCSD_CARD_BUSY ((uint32_t)1 << 31) /* Card power-up busy bit */ - -/* R6 Card Status bit definitions */ - -#define MMCSD_R6_RCA_SHIFT (16) /* New published RCA */ -#define MMCSD_R6_RCA_MASK ((uint32_t)0xffff << MMCSD_R6_RCA_SHIFT) -#define MMCSD_R6_COMCRCERROR ((uint32_t)1 << 15) /* CRC error */ -#define MMCSD_R6_ILLEGALCOMMAND ((uint32_t)1 << 14) /* Bad command */ -#define MMCSD_R6_ERROR ((uint32_t)1 << 13) /* General error */ -#define MMCSD_R6_STATE_SHIFT (9) /* Current card state */ -#define MMCSD_R6_STATE_MASK ((uint32_t)15 << MMCSD_R6_STATE_SHIFT) - /* Card identification mode states */ -# define MMCSD_R6_STATE_IDLE ((uint32_t)0 << MMCSD_R6_STATE_SHIFT) /* 0=Idle state */ -# define MMCSD_R6_STATE_READY ((uint32_t)1 << MMCSD_R6_STATE_SHIFT) /* 1=Ready state */ -# define MMCSD_R6_STATE_IDENT ((uint32_t)2 << MMCSD_R6_STATE_SHIFT) /* 2=Identification state */ - /* Data transfer states */ -# define MMCSD_R6_STATE_STBY ((uint32_t)3 << MMCSD_R6_STATE_SHIFT) /* 3=Standby state */ -# define MMCSD_R6_STATE_TRAN ((uint32_t)4 << MMCSD_R6_STATE_SHIFT) /* 4=Transfer state */ -# define MMCSD_R6_STATE_DATA (5(uint32_t) << MMCSD_R6_STATE_SHIFT) /* 5=Sending data state */ -# define MMCSD_R6_STATE_RCV ((uint32_t)6 << MMCSD_R6_STATE_SHIFT) /* 6=Receiving data state */ -# define MMCSD_R6_STATE_PRG ((uint32_t)7 << MMCSD_R6_STATE_SHIFT) /* 7=Programming state */ -# define MMCSD_R6_STATE_DIS ((uint32_t) << MMCSD_R6_STATE_SHIFT) /* 8=Disconnect state */ -#define MMCSD_R6_ERRORMASK ((uint32_t)0x0000e000) /* Error mask */ - -/* SD Configuration Register (SCR) encoding */ - -#define MMCSD_SCR_BUSWIDTH_1BIT (1) -#define MMCSD_SCR_BUSWIDTH_2BIT (2) -#define MMCSD_SCR_BUSWIDTH_4BIT (4) -#define MMCSD_SCR_BUSWIDTH_8BIT (8) - -/* Last 4 bytes of the 48-bit R7 response */ - -#define MMCSD_R7VERSION_SHIFT (28) /* Bits 28-31: Command version number */ -#define MMCSD_R7VERSION_MASK ((uint32_t)0x0f << MMCSD_R7VERSION_SHIFT) -#define MMCSD_R7VOLTAGE_SHIFT (8) /* Bits 8-11: Voltage accepted */ -#define MMCSD_R7VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_R7VOLTAGE_SHIFT) -# define MMCSD_R7VOLTAGE_27 ((uint32_t)0x01 << MMCSD_R7VOLTAGE_SHIFT) /* 2.7-3.6V */ -#define MMCSD_R7ECHO_SHIFT (0) /* Bits 0-7: Echoed check pattern */ -#define MMCSD_R7ECHO_MASK ((uint32_t)0xff << MMCSD_R7ECHO_SHIFT) -# define MMCSD_R7CHECKPATTERN ((uint32_t)0xaa << MMCSD_R7ECHO_SHIFT) - -/******************************************************************************************** - * Public Types - ********************************************************************************************/ - -/* Decoded Card Identification (CID) register */ - -struct mmcsd_cid_s -{ - uint8_t mid; /* 127:120 8-bit Manufacturer ID */ - uint16_t oid; /* 119:104 16-bit OEM/Application ID (ascii) */ - uint8_t pnm[6]; /* 103:64 40-bit Product Name (ascii) + null terminator */ - uint8_t prv; /* 63:56 8-bit Product revision */ - uint32_t psn; /* 55:24 32-bit Product serial number */ - /* 23:20 4-bit (reserved) */ - uint16_t mdt; /* 19:8 12-bit Manufacturing date */ - uint8_t crc; /* 7:1 7-bit CRC7 */ - /* 0:0 1-bit (not used) */ -}; - -/* Decoded Card Specific Data (CSD) register */ - -struct mmcsd_csd_s -{ - uint8_t csdstructure; /* 127:126 CSD structure */ - uint8_t mmcspecvers; /* 125:122 MMC Spec version (MMC only) */ - - struct - { - uint8_t timeunit; /* 2:0 Time exponent */ - uint8_t timevalue; /* 6:3 Time mantissa */ - } taac; /* 119:112 Data read access-time-1 */ - - uint8_t nsac; /* 111:104 Data read access-time-2 in CLK cycle(NSAC*100) */ - - struct - { - uint8_t transferrateunit; /* 2:0 Rate exponent */ - uint8_t timevalue; /* 6:3 Rate mantissa */ - } transpeed; /* 103:96 Max. data transfer rate */ - - uint16_t ccc; /* 95:84 Card command classes */ - uint8_t readbllen; /* 83:80 Max. read data block length */ - uint8_t readblpartial; /* 79:79 Partial blocks for read allowed */ - uint8_t writeblkmisalign; /* 78:78 Write block misalignment */ - uint8_t readblkmisalign; /* 77:77 Read block misalignment */ - uint8_t dsrimp; /* 76:76 DSR implemented */ - - union - { -#ifdef CONFIG_MMCSD_MMCSUPPORT - struct - { - uint16_t csize; /* 73:62 Device size */ - uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ - uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ - uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ - uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ - uint8_t csizemult; /* 49:47 Device size multiplier */ - - union - { - struct /* MMC system specification version 3.1 */ - { - uint8_t ergrpsize; /* 46:42 Erase group size (MMC 3.1) */ - uint8_t ergrpmult; /* 41:37 Erase group multiplier (MMC 3.1) */ - } mmc31; - struct /* MMC system specification version 2.2 */ - { - uint8_t sectorsize; /* 46:42 Erase sector size (MMC 2.2) */ - uint8_t ergrpsize; /* 41:37 Erase group size (MMC 2.2) */ - } mmc22; - } er; - - uint8_t mmcwpgrpsize; /* 36:32 Write protect group size (MMC) */ - } mmc; -#endif - struct - { - uint16_t csize; /* 73:62 Device size */ - uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ - uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ - uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ - uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ - uint8_t csizemult; /* 49:47 Device size multiplier */ - uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ - uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ - uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ - } sdbyte; - - struct - { - /* 73:70 (reserved) */ - uint32_t csize; /* 69:48 Device size */ - /* 47:47 (reserved) */ - uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ - uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ - uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ - } sdblock; - } u; - - uint8_t wpgrpen; /* 31:31 Write protect group enable */ - uint8_t mmcdfltecc; /* 30:29 Manufacturer default ECC (MMC) */ - uint8_t r2wfactor; /* 28:26 Write speed factor */ - uint8_t writebllen; /* 25:22 Max. write data block length */ - uint8_t writeblpartial; /* 21:21 Partial blocks for write allowed */ - uint8_t fileformatgrp; /* 15:15 File format group */ - uint8_t copy; /* 14:14 Copy flag (OTP) */ - uint8_t permwriteprotect; /* 13:13 Permanent write protection */ - uint8_t tmpwriteprotect; /* 12:12 Temporary write protection */ - uint8_t fileformat; /* 10:11 File format */ - uint8_t mmcecc; /* 9:8 ECC (MMC) */ - uint8_t crc; /* 7:1 CRC */ - /* 0:0 Not used */ -}; - -struct mmcsd_scr_s -{ - uint8_t scrversion; /* 63:60 Version of SCR structure */ - uint8_t sdversion; /* 59:56 SD memory card physical layer version */ - uint8_t erasestate; /* 55:55 Data state after erase (1 or 0) */ - uint8_t security; /* 54:52 SD security support */ - uint8_t buswidth; /* 51:48 DAT bus widthes supported */ - /* 47:32 SD reserved space */ - uint32_t mfgdata; /* 31:0 Reserved for manufacturing data */ -}; - -/******************************************************************************************** - * Public Data - ********************************************************************************************/ - -#undef EXTERN -#if defined(__cplusplus) -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/******************************************************************************************** - * Public Functions - ********************************************************************************************/ - - -#undef EXTERN -#if defined(__cplusplus) -} -#endif -#endif /* __DRIVERS_MMCSD_MMCSD_SDIO_H */ |