diff options
Diffstat (limited to 'nuttx/drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c')
| -rw-r--r-- | nuttx/drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c | 111 |
1 files changed, 0 insertions, 111 deletions
diff --git a/nuttx/drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c b/nuttx/drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c deleted file mode 100644 index e5655bed6..000000000 --- a/nuttx/drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * drivers/wireless/cc1101/ISM2_905MHzGFSK250kbps.c - * - * Copyright (C) 2011 Uros Platise. All rights reserved. - * Copyright (C) 2011 Ales Verbic. All rights reserved. - * - * Authors: Uros Platise <uros.platise@isotel.eu> - * Ales Verbic <ales.verbic@isotel.eu> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#include <nuttx/wireless/cc1101.h> - -/** Settings for 905 MHz, GFSK at 250kbps - * - * ISM Region 2 (America) only, Band 902–928 MHz - * - * Cordless phones 1 W - * Microwave ovens 750 W - * Industrial heaters 100 kW - * Military radar 1000 kW - * - * Deviation = 126.953125 - * Base frequency = 901.999969 - * Carrier frequency = 905.998993 - * Channel number = 20 - * Carrier frequency = 905.998993 - * Modulated = true - * Modulation format = GFSK - * Manchester enable = false - * Sync word qualifier mode = 30/32 sync word bits detected - * Preamble count = 4 - * Channel spacing = 199.951172 - * Carrier frequency = 905.998993 - * Data rate = 249.939 - * RX filter BW = 541.666667 - * Data format = Normal mode - * Length config = Variable packet length mode. Packet length configured by the first byte after sync word - * CRC enable = true - * Packet length = 61 - * Device address = 0 - * Address config = No address check - * CRC autoflush = false - * PA ramping = false - * TX power = 0 - */ -const struct c1101_rfsettings_s cc1101_rfsettings_ISM2_905MHzGFSK250kbps = { - .FSCTRL1 = 0x0C, // FSCTRL1 Frequency Synthesizer Control - .FSCTRL0 = 0x00, // FSCTRL0 Frequency Synthesizer Control - - .FREQ2 = 0x22, // FREQ2 Frequency Control Word, High Byte - .FREQ1 = 0xB1, // FREQ1 Frequency Control Word, Middle Byte - .FREQ0 = 0x3B, // FREQ0 Frequency Control Word, Low Byte - - .MDMCFG4 = 0x2D, // MDMCFG4 Modem Configuration - .MDMCFG3 = 0x3B, // MDMCFG3 Modem Configuration - .MDMCFG2 = 0x13, // MDMCFG2 Modem Configuration - .MDMCFG1 = 0x22, // MDMCFG1 Modem Configuration - .MDMCFG0 = 0xF8, // MDMCFG0 Modem Configuration - - .DEVIATN = 0x62, // DEVIATN Modem Deviation Setting - - .FOCCFG = 0x1D, // FOCCFG Frequency Offset Compensation Configuration - - .BSCFG = 0x1C, // BSCFG Bit Synchronization Configuration - - .AGCCTRL2= 0xC7, // AGCCTRL2 AGC Control - .AGCCTRL1= 0x00, // AGCCTRL1 AGC Control - .AGCCTRL0= 0xB0, // AGCCTRL0 AGC Control - - .FREND1 = 0xB6, // FREND1 Front End RX Configuration - .FREND0 = 0x10, // FREND0 Front End TX Configuration - - .FSCAL3 = 0xEA, // FSCAL3 Frequency Synthesizer Calibration - .FSCAL2 = 0x2A, // FSCAL2 Frequency Synthesizer Calibration - .FSCAL1 = 0x00, // FSCAL1 Frequency Synthesizer Calibration - .FSCAL0 = 0x1F, // FSCAL0 Frequency Synthesizer Calibration - - .CHMIN = 0, // VERIFY REGULATIONS! - .CHMAX = 0xFF, - - .PAMAX = 8, // 0 means power OFF, 8 represents PA[7] - .PA = {0x03, 0x0E, 0x1E, 0x27, 0x39, 0x8E, 0xCD, 0xC0} -}; |