diff options
Diffstat (limited to 'nuttx/tools/Config.mk')
| -rw-r--r-- | nuttx/tools/Config.mk | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/nuttx/tools/Config.mk b/nuttx/tools/Config.mk deleted file mode 100644 index 9f36ed4f3..000000000 --- a/nuttx/tools/Config.mk +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################ -# Config.mk -# Global build rules and macros. -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Richard Cochran -# Gregory Nutt <gnutt@nuttx.org> -# -# This file (along with $(TOPDIR)/.config) must be included by every -# configuration-specific Make.defs file. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# These are configuration variables that are quoted by configuration tool -# but which must be unquoated when used in the build system. - -CONFIG_ARCH := $(patsubst "%",%,$(strip $(CONFIG_ARCH))) -CONFIG_ARCH_CHIP := $(patsubst "%",%,$(strip $(CONFIG_ARCH_CHIP))) -CONFIG_ARCH_BOARD := $(patsubst "%",%,$(strip $(CONFIG_ARCH_BOARD))) - -# Some defaults just to prohibit some bad behavior if for some reason they -# are not defined - -OBJEXT ?= .o -LIBEXT ?= .a - -# DELIM - Path segment delimiter character -# -# Depends on this settings defined in board-specific defconfig file installed -# at $(TOPDIR)/.config: -# -# CONFIG_WINDOWS_NATIVE - Defined for a Windows native build - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - DELIM = $(strip \) -else - DELIM = $(strip /) -endif - -# INCDIR - Convert a list of directory paths to a list of compiler include -# directirves -# Example: CFFLAGS += ${shell $(INCDIR) [options] "compiler" "dir1" "dir2" "dir2" ...} -# -# Note that the compiler string and each directory path string must quoted if -# they contain spaces or any other characters that might get mangled by the -# shell -# -# Depends on this setting passed as a make commaond line definition from the -# toplevel Makefile: -# -# TOPDIR - The path to the the top level NuttX directory in the form -# appropriate for the current build environment -# -# Depends on this settings defined in board-specific defconfig file installed -# at $(TOPDIR)/.config: -# -# CONFIG_WINDOWS_NATIVE - Defined for a Windows native build - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - INCDIR = "$(TOPDIR)\tools\incdir.bat" -else - INCDIR = "$(TOPDIR)/tools/incdir.sh" -endif - -# PREPROCESS - Default macro to run the C pre-processor -# Example: $(call PREPROCESS, in-file, out-file) -# -# Depends on these settings defined in board-specific Make.defs file -# installed at $(TOPDIR)/Make.defs: -# -# CPP - The command to invoke the C pre-processor -# CPPFLAGS - Options to pass to the C pre-processor - -define PREPROCESS - @echo "CPP: $1->$2" - $(Q) $(CPP) $(CPPFLAGS) $1 -o $2 -endef - -# COMPILE - Default macro to compile one C file -# Example: $(call COMPILE, in-file, out-file) -# -# Depends on these settings defined in board-specific Make.defs file -# installed at $(TOPDIR)/Make.defs: -# -# CC - The command to invoke the C compiler -# CFLAGS - Options to pass to the C compiler - -define COMPILE - @echo "CC: $1" - $(Q) $(CC) -c $(CFLAGS) $(abspath $1) -o $2 -endef - -# COMPILEXX - Default macro to compile one C++ file -# Example: $(call COMPILEXX, in-file, out-file) -# -# Depends on these settings defined in board-specific Make.defs file -# installed at $(TOPDIR)/Make.defs: -# -# CXX - The command to invoke the C++ compiler -# CXXFLAGS - Options to pass to the C++ compiler - -define COMPILEXX - @echo "CXX: $1" - $(Q) $(CXX) -c $(CXXFLAGS) $(abspath $1) -o $2 -endef - -# ASSEMBLE - Default macro to assemble one assembly language file -# Example: $(call ASSEMBLE, in-file, out-file) -# -# NOTE that the most common toolchain, GCC, uses the compiler to assemble -# files because this has the advantage of running the C Pre-Processor against -# the assembly language files. This is not possible with other toolchains; -# platforms using those other tools should define AS and over-ride this -# definition in order to use the assembler directly. -# -# Depends on these settings defined in board-specific Make.defs file -# installed at $(TOPDIR)/Make.defs: -# -# CC - By default, the C compiler is used to compile assembly language -# files -# AFLAGS - Options to pass to the C+compiler - -define ASSEMBLE - @echo "AS: $1" - $(Q) $(CC) -c $(AFLAGS) $(abspath $1) -o $2 -endef - -# ARCHIVE - Add a list of files to an archive -# Example: $(call ARCHIVE, archive-file, "file1 file2 file3 ...") -# -# Note: The fileN strings may not contain spaces or characters that may be -# interpreted strangely by the shell -# -# Depends on these settings defined in board-specific Make.defs file -# installed at $(TOPDIR)/Make.defs: -# -# AR - The command to invoke the archiver (includes any options) -# -# Depends on this settings defined in board-specific defconfig file installed -# at $(TOPDIR)/.config: -# -# CONFIG_WINDOWS_NATIVE - Defined for a Windows native build - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) -define ARCHIVE - @echo AR: $2 - $(Q) $(AR) $1 $(2) -endef -else -define ARCHIVE - @echo "AR: $2" - $(Q) $(AR) $1 $(2) || { echo "$(AR) $1 FAILED!" ; exit 1 ; } -endef -endif - -# DELFILE - Delete one file - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) -define DELFILE - $(Q) if exist $1 (del /f /q $1) -endef -else -define DELFILE - $(Q) rm -f $1 -endef -endif - -# DELDIR - Delect one directory - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) -define DELDIR - $(Q) if exist $1 (rmdir /q /s $1) -endef -else -define DELDIR - $(Q) rm -rf $1 -endef -endif - -# CLEAN - Default clean target - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) -define CLEAN - $(Q) if exist *$(OBJEXT) (del /f /q *$(OBJEXT)) - $(Q) if exist *$(LIBEXT) (del /f /q *$(LIBEXT)) - $(Q) if exist *~ (del /f /q *~) - $(Q) if exist (del /f /q .*.swp) -endef -else -define CLEAN - $(Q) rm -f *$(OBJEXT) *$(LIBEXT) *~ .*.swp -endef -endif -
\ No newline at end of file |