diff options
Diffstat (limited to 'src/drivers/airspeed/airspeed.cpp')
-rw-r--r-- | src/drivers/airspeed/airspeed.cpp | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/src/drivers/airspeed/airspeed.cpp b/src/drivers/airspeed/airspeed.cpp new file mode 100644 index 000000000..5a8157deb --- /dev/null +++ b/src/drivers/airspeed/airspeed.cpp @@ -0,0 +1,378 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file ets_airspeed.cpp + * @author Simon Wilks + * + * Driver for the Eagle Tree Airspeed V3 connected via I2C. + */ + +#include <nuttx/config.h> + +#include <drivers/device/i2c.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdbool.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <nuttx/arch.h> +#include <nuttx/wqueue.h> +#include <nuttx/clock.h> + +#include <arch/board/board.h> + +#include <systemlib/airspeed.h> +#include <systemlib/err.h> +#include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> + +#include <drivers/drv_airspeed.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/subsystem_info.h> + +#include <drivers/airspeed/airspeed.h> + +Airspeed::Airspeed(int bus, int address, unsigned conversion_interval) : + I2C("Airspeed", AIRSPEED_DEVICE_PATH, bus, address, 100000), + _num_reports(0), + _next_report(0), + _oldest_report(0), + _reports(nullptr), + _sensor_ok(false), + _measure_ticks(0), + _collect_phase(false), + _diff_pres_offset(0.0f), + _airspeed_pub(-1), + _conversion_interval(conversion_interval), + _sample_perf(perf_alloc(PC_ELAPSED, "airspeed_read")), + _comms_errors(perf_alloc(PC_COUNT, "airspeed_comms_errors")), + _buffer_overflows(perf_alloc(PC_COUNT, "airspeed_buffer_overflows")) +{ + // enable debug() calls + _debug_enabled = true; + + // work_cancel in the dtor will explode if we don't do this... + memset(&_work, 0, sizeof(_work)); +} + +Airspeed::~Airspeed() +{ + /* make sure we are truly inactive */ + stop(); + + /* free any existing reports */ + if (_reports != nullptr) + delete[] _reports; +} + +int +Airspeed::init() +{ + int ret = ERROR; + + /* do I2C init (and probe) first */ + if (I2C::init() != OK) + goto out; + + /* allocate basic report buffers */ + _num_reports = 2; + _reports = new struct differential_pressure_s[_num_reports]; + + for (unsigned i = 0; i < _num_reports; i++) + _reports[i].max_differential_pressure_pa = 0; + + if (_reports == nullptr) + goto out; + + _oldest_report = _next_report = 0; + + /* get a publish handle on the airspeed topic */ + memset(&_reports[0], 0, sizeof(_reports[0])); + _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &_reports[0]); + + if (_airspeed_pub < 0) + warnx("failed to create airspeed sensor object. Did you start uOrb?"); + + ret = OK; + /* sensor is ok, but we don't really know if it is within range */ + _sensor_ok = true; +out: + return ret; +} + +int +Airspeed::probe() +{ + return measure(); +} + +int +Airspeed::ioctl(struct file *filp, int cmd, unsigned long arg) +{ + switch (cmd) { + + case SENSORIOCSPOLLRATE: { + switch (arg) { + + /* switching to manual polling */ + case SENSOR_POLLRATE_MANUAL: + stop(); + _measure_ticks = 0; + return OK; + + /* external signalling (DRDY) not supported */ + case SENSOR_POLLRATE_EXTERNAL: + + /* zero would be bad */ + case 0: + return -EINVAL; + + /* set default/max polling rate */ + case SENSOR_POLLRATE_MAX: + case SENSOR_POLLRATE_DEFAULT: { + /* do we need to start internal polling? */ + bool want_start = (_measure_ticks == 0); + + /* set interval for next measurement to minimum legal value */ + _measure_ticks = USEC2TICK(_conversion_interval); + + /* if we need to start the poll state machine, do it */ + if (want_start) + start(); + + return OK; + } + + /* adjust to a legal polling interval in Hz */ + default: { + /* do we need to start internal polling? */ + bool want_start = (_measure_ticks == 0); + + /* convert hz to tick interval via microseconds */ + unsigned ticks = USEC2TICK(1000000 / arg); + + /* check against maximum rate */ + if (ticks < USEC2TICK(_conversion_interval)) + return -EINVAL; + + /* update interval for next measurement */ + _measure_ticks = ticks; + + /* if we need to start the poll state machine, do it */ + if (want_start) + start(); + + return OK; + } + } + } + + case SENSORIOCGPOLLRATE: + if (_measure_ticks == 0) + return SENSOR_POLLRATE_MANUAL; + + return (1000 / _measure_ticks); + + case SENSORIOCSQUEUEDEPTH: { + /* add one to account for the sentinel in the ring */ + arg++; + + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 2) || (arg > 100)) + return -EINVAL; + + /* allocate new buffer */ + struct differential_pressure_s *buf = new struct differential_pressure_s[arg]; + + if (nullptr == buf) + return -ENOMEM; + + /* reset the measurement state machine with the new buffer, free the old */ + stop(); + delete[] _reports; + _num_reports = arg; + _reports = buf; + start(); + + return OK; + } + + case SENSORIOCGQUEUEDEPTH: + return _num_reports - 1; + + case SENSORIOCRESET: + /* XXX implement this */ + return -EINVAL; + + case AIRSPEEDIOCSSCALE: { + struct airspeed_scale *s = (struct airspeed_scale*)arg; + _diff_pres_offset = s->offset_pa; + return OK; + } + + case AIRSPEEDIOCGSCALE: { + struct airspeed_scale *s = (struct airspeed_scale*)arg; + s->offset_pa = _diff_pres_offset; + s->scale = 1.0f; + return OK; + } + + default: + /* give it to the superclass */ + return I2C::ioctl(filp, cmd, arg); + } +} + +ssize_t +Airspeed::read(struct file *filp, char *buffer, size_t buflen) +{ + unsigned count = buflen / sizeof(struct differential_pressure_s); + int ret = 0; + + /* buffer must be large enough */ + if (count < 1) + return -ENOSPC; + + /* if automatic measurement is enabled */ + if (_measure_ticks > 0) { + + /* + * While there is space in the caller's buffer, and reports, copy them. + * Note that we may be pre-empted by the workq thread while we are doing this; + * we are careful to avoid racing with them. + */ + while (count--) { + if (_oldest_report != _next_report) { + memcpy(buffer, _reports + _oldest_report, sizeof(*_reports)); + ret += sizeof(_reports[0]); + INCREMENT(_oldest_report, _num_reports); + } + } + + /* if there was no data, warn the caller */ + return ret ? ret : -EAGAIN; + } + + /* manual measurement - run one conversion */ + /* XXX really it'd be nice to lock against other readers here */ + do { + _oldest_report = _next_report = 0; + + /* trigger a measurement */ + if (OK != measure()) { + ret = -EIO; + break; + } + + /* wait for it to complete */ + usleep(_conversion_interval); + + /* run the collection phase */ + if (OK != collect()) { + ret = -EIO; + break; + } + + /* state machine will have generated a report, copy it out */ + memcpy(buffer, _reports, sizeof(*_reports)); + ret = sizeof(*_reports); + + } while (0); + + return ret; +} + +void +Airspeed::start() +{ + /* reset the report ring and state machine */ + _collect_phase = false; + _oldest_report = _next_report = 0; + + /* schedule a cycle to start things */ + work_queue(HPWORK, &_work, (worker_t)&Airspeed::cycle_trampoline, this, 1); + + /* notify about state change */ + struct subsystem_info_s info = { + true, + true, + true, + SUBSYSTEM_TYPE_DIFFPRESSURE + }; + static orb_advert_t pub = -1; + + if (pub > 0) { + orb_publish(ORB_ID(subsystem_info), pub, &info); + + } else { + pub = orb_advertise(ORB_ID(subsystem_info), &info); + } +} + +void +Airspeed::stop() +{ + work_cancel(HPWORK, &_work); +} + +void +Airspeed::cycle_trampoline(void *arg) +{ + Airspeed *dev = (Airspeed *)arg; + + dev->cycle(); +} + +void +Airspeed::print_info() +{ + perf_print_counter(_sample_perf); + perf_print_counter(_comms_errors); + perf_print_counter(_buffer_overflows); + warnx("poll interval: %u ticks", _measure_ticks); + warnx("report queue: %u (%u/%u @ %p)", + _num_reports, _oldest_report, _next_report, _reports); +} |